Your system administrator has restricted access to this app.

Enabled the Endpoint role on primary site server.
Enabled Endpoint protection in Default Client Settings
We have Default Client Antimalware Policy set.
When I click on System Center EndPoint Protection in All Programs I get following error:
Your system administrator has restricted access to this app.

I am getting this on several windows client builds with SCEP now, we don't have an Applocker policy at all, one of the computers in question is running Win 7 Pro!
I cant see how it could be malware as the users are standard users.
I also don't know how long its been like this, but a machine we just re-imaged last week is now doing it.
going to re-image and see if an update is causing it.

Similar Messages

Azure Antimalware (Endpoint Protection) says "your system administrator has restricted access to this app"

I see many posts about using SCCM to configure policies, etc., etc. However, I can't find any information about my specific issue:
I have installed the Antimalware extension on several Azure VMs. Only one VM allows access to "System Center Endpoint Protection". All the other ones say "your system administrator has restricted access to this app". Now, since I am the
system administrator, I am at a loss how to be able to see / configure the other VMs using this program.
I have not installed SCCM, since I didn't think I would need it. If, in fact, I must install SCCM, it pretty much defeats the purpose of an extension.
Any ideas would be greatly appreciated.
--- If I am in the wrong forum, please let me know where I should post my question, since there don't appear to be any forums discussing extensions for Azure.

Although azure endpoint protection is the same core technology as SCEP it is not managed in the same way. Also, if the ConfigMgr agent is not installed on these VMs, then it's quite impossible for ConfigMgr to the source of the issue here. You are better
off posting to an Azure forum.
However, did you elevate when launching the EP console?
Jason | http://blog.configmgrftw.com | @jasonsandys

Problem happening again. The maximum report processing jobs limit configured by your system administrator has been reached.

We have started receiving load report failed error again in one of our production servers. This problem occurred some months ago and on that time we found that in the code reportdocument.close method was not called so we added into the code and set the print job limit to 400 and problem went away for couple of months but now it has started again.
Load report failed.
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
   at AppSuite.WebApp.CrystalViewer.LoadReport(Boolean bRefresh)
   at AppSuite.WebApp.CrystalViewer.Page_Load(Object sender, EventArgs e)
   at System.Web.UI.Control.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
The maximum report processing jobs limit configured by your system administrator has been reached.
   at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
This is our code
Private m_oReportDocument As New ReportDocument
    Private ReadOnly Property ReportId() As Integer
        Get
            Return Integer.Parse(Me.Request.QueryString("r"))
        End Get
    End Property
    Private Property CacheKey() As String
        Get
            Dim sCacheKey As String = Me.Request.QueryString("ck")
            If sCacheKey Is Nothing OrElse sCacheKey.Length = 0 Then
                sCacheKey = CStr(Me.ViewState("CacheKey"))
            End If
            Return sCacheKey
        End Get
        Set(ByVal Value As String)
            Me.ViewState("CacheKey") = Value
        End Set
    End Property
    Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
        If Not Me.IsPostBack Then
            LoadReport()
        End If
    End Sub
    Private Sub btnPDF_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnPDF.Click
        'Redirect to the PDF Viewer passing it the ReportId and CacheKey
        Me.Response.Redirect(String.Format(ReportHelper.PDFViewerURL, Me.ReportId, Me.CacheKey))
    End Sub
    Private Sub btnRTF_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnRTF.Click
        'Redirect to the RTF Viewer passing it the ReportId and CacheKey
        Me.Response.Redirect(String.Format(ReportHelper.RTFViewerURL, Me.ReportId, Me.CacheKey))
    End Sub
    Private Sub btnExcel_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnExcel.Click
        'Redirect to the Excel Viewer passing it the ReportId and CacheKey
        Me.Response.Redirect(String.Format(ReportHelper.ExcelViewerURL, Me.ReportId, Me.CacheKey))
    End Sub
    Private Sub crvMain_Navigate(ByVal source As Object, ByVal e As CrystalDecisions.Web.NavigateEventArgs) Handles crvMain.Navigate
        LoadReport()
    End Sub
    Private Sub crvMain_Search(ByVal source As Object, ByVal e As CrystalDecisions.Web.SearchEventArgs) Handles crvMain.Search
        LoadReport()
    End Sub
    Private Sub crvMain_ViewZoom(ByVal source As Object, ByVal e As CrystalDecisions.Web.ZoomEventArgs) Handles crvMain.ViewZoom
        LoadReport()
    End Sub
    Private Sub crvMain_Drill(ByVal source As Object, ByVal e As CrystalDecisions.Web.DrillEventArgs) Handles crvMain.Drill
        LoadReport()
    End Sub
    Private Sub crvMain_DrillDownSubreport(ByVal source As Object, ByVal e As CrystalDecisions.Web.DrillSubreportEventArgs) Handles crvMain.DrillDownSubreport
        LoadReport()
    End Sub
    Private Sub crvMain_ReportRefresh(ByVal source As Object, ByVal e As CrystalDecisions.Web.ViewerEventArgs) Handles crvMain.ReportRefresh
        LoadReport(True)
    End Sub
    Private Sub LoadReport()
        LoadReport(False)
    End Sub
    Private Sub LoadReport(ByVal bRefresh As Boolean)
        If Common.CouldBeMultiDB(User.Identity.Name) AndAlso TypedSession.OverrideCompany.Length > 0 Then
            Common.Settings.OverrideCompany = TypedSession.OverrideCompany
        End If
        'Get the report data
        Dim dtReport As DataTable = ReportHelper.GetReportData(Me.CacheKey, bRefresh)
        'If there is data to display bind it to the Crystal Viewer
        If dtReport.Rows.Count > 0 Then
            With m_oReportDocument
                .Load(ReportHelper.GetReportPath(Me.ReportId))
                .SetDataSource(dtReport)
                .PrintOptions.PaperSize = Common.Settings.CrystalPaperSize
            End With
            crvMain.ReportSource = m_oReportDocument
        Else
            'Hide the controls and display a message if there is no data
            crvMain.Visible = False
            btnPDF.Visible = False
            btnExcel.Visible = False
            lblNoResults.Visible = True
        End If
    End Sub
    Protected Sub Page_Unload(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Unload
        m_oReportDocument.Close()
        m_oReportDocument.Dispose()
    End Sub
Can any one tell if we are doing anything wrong in our code. We don't use sub reports any more however we do use paging and some of our reports have 200+ pages. Also is it possible to find out print job limit and concurrent users by writing some code.
Thanks

I suspect it's not the code - after all it worked(?). It is much more likely that, it is the load. Remember that the report engine can only handle three concurrent requests at any one time. Also, remember that you can run out of print jobs real fast as subreports also count as print job. E.g.; say someone added a report that has 4 subreports in the detail section, the report runs a 100 records, you will be at 401 print jobs and thus over the limit. You can keep increasing the print job limit, but that means you are loading the server and eventually you will bring it down too...
It may be time to consider, web farms or Report Application Server to scale up(?).
Getting to the latest SP is never a bad idea either.
And have a look at the scalability suggestions in this doc:
Crystal Reports 2008 Component Engine Scalability
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

HT1925 Message after removing and trying to reinstall itunes 'The system administrator has set policies preventing this installation'. Can anybody help?

After removing and reinstlling iTunes .....message reads 'the system administrator has set policies preventing this installation'

Try the following user tip:
"The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems

This operation has been cancelled due to restrictions in effect on this computer. Please contact your systems administrator

Here is our environment: Windows Server 2008 x86 SP2 Terminal Server running Citrix XenApp5.0 with Office 2007 installed. We have a Group Policy to restrict users from access the server's C:\ drive. When our users open or save a Microsoft
Word, Excel, etc. document they are presented with the following error. "This operation has been cancelled due to restrictions in effect on this computer. Please contact your systems administrator." When our users click on the OK button it
allows them to open or save the document. If I remove the restriction to C:\ from our Group Policy, then everything is working fine. Please tell me how to fix this problem. Thanks.

Hi Jeffery,
Unfortunately, I could not work around this and MS said it was by design. I even tried some clever stuff with symbolic link s but to no avail. I simply ended up informing my users to ignore the message and continue. i don't want anyone to be able to browse
the C: drive so I'm leaving the NoViewOnDrives registry key in place. However, there is one possible workaround but for me , it didn't suit:
Change the temp location of the folder Outlook uses for attachments
http://support.microsoft.com/kb/817878
Also, I'd recommend forcing all attachments to open in read-only mode http://support.microsoft.com/kb/953621
Annoying but you can't have everything i guess :(

Excel Web Access(An error has occurred.Please contact your system administrator if this problem persists. )

I'm using share point 2007 under windows server 2008 R2(one web server, another db server).When I publish a excel(*.xlsx) to report library or view it in web browser with the same error as bellows:
Excel Web Access
An error has occurred.
Please contact your system administrator if this problem persists.
Please kindly support to guide how to fix it with bellow information in details such as log.Many thanks!
1. The 12/logs file is as bellows:
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Calculation Services    2u7d Medium ExcelServerSharedWebApplication.Local: An exception was thrown by configdb infrastructure: System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could
not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local().
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Services Administration 8tqh Critical Excel Services: Unexpected exception while trying to access Shared Services Database;. Error = ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that
either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context..
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Web Access              6nfi Unexpected InternalEwr.OpenWorkbook - An unexpected exception in the ECS Proxy occurred. Message: Microsoft.Office.Excel.Server.ExcelServerSettingException:
An error has occurred. ---> System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running
outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()     --- End of inner exception stack trace ---     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()
at Microsoft.Office.Excel.Server.ExcelServerSettings.get_Settings()     at Microsoft.Office.Excel.Server.ExcelServerSettings.get_EcsList()     at Microsoft.Office...
2.the event in event viewer is:
Log Name:      Security
Source:        Microsoft-Windows-Security-Auditing
Date:          2014/10/10 9:49:43
Event ID:      4625
Task Category: Logon
Level:         Information
Keywords:      Audit Failure
User:          N/A
Computer:      ***.net
Description:
An account failed to log on.
Subject:
Security ID:  NULL SID
Account Name:  -
Account Domain:  -
Logon ID:  0x0
Logon Type:   3
Account For Which Logon Failed:
Security ID:  NULL SID
Account Name:  ***
Account Domain:  ***
Failure Information:
Failure Reason:  An Error occured during Logon.
Status:   0xc000006d
Sub Status:  0x0
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: ***
Source Network Address: ***
Source Port:  63664
Detailed Authentication Information:
Logon Process:
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length:  0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
Event Xml:
<Event xmlns="">
<System>
    <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
    <EventID>4625</EventID>
    <Version>0</Version>
    <Level>0</Level>
    <Task>12544</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8010000000000000</Keywords>
    <TimeCreated SystemTime="2014-10-10T01:49:43.563436300Z" />
    <EventRecordID>37602685</EventRecordID>
    <Correlation />
    <Execution ProcessID="532" ThreadID="26096" />
    <Channel>Security</Channel>
    <Computer>***.net</Computer>
    <Security />
</System>
<EventData>
    <Data Name="SubjectUserSid">S-1-0-0</Data>
    <Data Name="SubjectUserName">-</Data>
    <Data Name="SubjectDomainName">-</Data>
    <Data Name="SubjectLogonId">0x0</Data>
    <Data Name="TargetUserSid">S-1-0-0</Data>
    <Data Name="TargetUserName">***</Data>
    <Data Name="TargetDomainName">***</Data>
    <Data Name="Status">0xc000006d</Data>
    <Data Name="FailureReason">%%2304</Data>
    <Data Name="SubStatus">0x0</Data>
    <Data Name="LogonType">3</Data>
    <Data Name="LogonProcessName">
    </Data>
    <Data Name="AuthenticationPackageName">NTLM</Data>
    <Data Name="WorkstationName">***</Data>
    <Data Name="TransmittedServices">-</Data>
    <Data Name="LmPackageName">-</Data>
    <Data Name="KeyLength">0</Data>
    <Data Name="ProcessId">0x0</Data>
    <Data Name="ProcessName">-</Data>
    <Data Name="IpAddress">***</Data>
    <Data Name="IpPort">63664</Data>
</EventData>
</Event>

Hi Tracy,
Have you changed something on your SharePoint 2007 environment recently before this issue occurred?
This issue may be related to Alternate Access Mappings settings like the following similar post, if you have configured AAM, you can check if this issue happened to some URLs, if it's the case, please add the problematic URLs as a Publish URLs for the default
zone for your web application, and also add these URLs as trusted locations, then check results again.
If above doesn't work, please enable ULS log on verbose level to get more useful log errors which time are corresponding to the errors occur.
https://social.technet.microsoft.com/Forums/en-US/c9ab4818-65c9-444d-be50-1bfed1f1509b/excel-web-access-web-part-works-on-intranet-but-not-internet?forum=sharepointgenerallegacy
http://blog.bugrapostaci.com/2011/09/08/how-to-enable-verbose-log-mode-on-moss-2007/
Thanks
Daniel Yang
TechNet Community Support

I get message saying system administrator has set policies to prevent this installation; when trying to uninstall message says you do not have sufficient access to uninstall itunes please contact your administrator. i am administrator.

when intalling itunes i get message saying system administrator has set policies to prevent this installation; when trying to uninstall message says you do not have sufficient access to uninstall itunes please contact your administrator. i am the dministrator.

Windows right?
Likely your not the administor any more, the botnet is.
Check on this site really quick if your part of a botnet
http://botnetchecker.com/
All clear? Hopefully. Backup your files to a external drive, cd or dvd, USB keye etc off your computer.
Run the sfx file on this site and it will burn to a cd.
http://www.avira.com/en/support-download-avira-antivir-rescue-system
Next hit your BIO's key and set the cd to boot first, run the scanner and see what it pops up.
If your all clear then create another Admin, transfer your files over from the first Admin.
See if that works, eventually when your totally over to the new Admin, delete the old one.
If you can't create a new Admin, find out who locked your machine down, like your parents or it's a school computer?
Likely installed spyware or "nanyware" to watch you.
Hope that works.

I try to open hyperlinks in my email (Outlook) but I get this message: "this operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator". I am running Firefox 3.6.6

I try to open hyperlinks in my email (Outlook) but I get this message: "this operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator". I am running Firefox 3.6.6
== This happened ==
Not sure how often

See http://support.microsoft.com/default.aspx?scid=kb;EN-US;Q310049 You receive an error message when you click a hyperlink in Outlook (default browser)

The session variable, NQ_SESSION.OU_ORG, has no value definition.Please have your System Administrator look at the log for more details on this error. (HY000)

Hi All,
I have created a user 'Bitest' and group 'Bi_Test_Group'. Assigned the user to the group and the group to BI consumer role.
I gave access to only procurement and spend catalog folder reports and Dashboards.
When I login to BI Presentation Services with above created user and open any procurement and spent catalog dashboard i am getting below error in every report.
Its BI Apps 7.9.6.3 installation.I gave read access to group to all procurement and spent subject area.
Error Codes: OAMP2OPY:OPR4ONWY:U9IM8TAC:OI2DL65P:OI2DL65P
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 23006] The session variable, NQ_SESSION.OU_ORG, has no value definition.Please have your System Administrator look at the log for more details on this error. (HY000)
SQL Issued: {call NQSGetQueryColumnInfo('SELECT Fact."PO Amount" FROM "Procurement and Spend - Purchase Orders"')}
SQL Issued: SELECT Fact."PO Amount" FROM "Procurement and Spend - Purchase Orders"
Please help me in resolving this issue and getting results on Dashboard.
Thanks in advance
Thanks,
Sandeep

Check your query or connection pool settings etc

Safe mode did not start successfully. This page has encountered a critical error. Contact your system administrator if this problem persists.

Hi
I just now updated dec 2013 c.u to sharepoint server 2010 sp2
I get this error in event viewer when I browse web applications , they not open even
Load control template file /_controltemplates/TaxonomyPicker.ascx failed: Could not load type 'Microsoft.SharePoint.Portal.WebControls.TaxonomyPicker' from assembly 'Microsoft.SharePoint.Portal, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'.
SharePoint Web Services Round Robin Service Load Balancer Event: EndpointFailure
Process Name: OWSTIMER
Process ID: 3836
AppDomain Name: DefaultDomain
AppDomain ID: 1
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:548f72e6a39f401e95e92711aea13c45#authority=urn:uuid:9aebe976322541d280e4bd3799fa283f&authority=https://spfwf01:32844/Topology/topology.svc
Active Endpoints: 2
Failed Endpoints:1
Safe mode did not start successfully. This page has encountered a critical error. Contact your system administrator if this problem persists.
adil

This messge I get initially I get two times (1)
SharePoint Web Services Round Robin Service Load Balancer Event: EndpointFailure
Process Name: w3wp
Process ID: 4600
AppDomain Name: /LM/W3SVC/2141356646/ROOT-1-130405218187772398
AppDomain ID: 2
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:548f72e6a39f401e95e92711aea13c45#authority=urn:uuid:9aebe976322541d280e4bd3799fa283f&authority=https://spfwf01:32844/Topology/topology.svc
Active Endpoints: 2
Failed Endpoints:1
Affected Endpoint: http://spfapp02:32843/548f72e6a39f401e95e92711aea13c45/MetadataWebService.svc
aftert this message three times (2)
The Managed Metadata Service 'Managed Metadata Service' is inaccessible.
and after (3)
The health service has removed some items from the send queue for management group "MOJOmanagement" since it exceeded the maximum allowed size of 15 megabytes.
after (4)
Safe mode did not start successfully. This page has encountered a critical error. Contact your system administrator if this problem persists.
and this time I seen I am unable to browse web applications
and
Load control template file /_controltemplates/TaxonomyPicker.ascx failed: Could not load type 'Microsoft.SharePoint.Portal.WebControls.TaxonomyPicker' from assembly 'Microsoft.SharePoint.Portal, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'.
adil

Web Part Error: This page has encountered a critical error. Contact your system administrator if this problem persists

Hi there,
I am getting the following error in SharePoint 2007 site.
Web Part Error: This page has encountered a critical error. Contact your system administrator if this problem persists.
Show Error Details
Hide Error Details
[WebPartPageUserException: This page has encountered a critical error. Contact your system administrator if this problem persists.]
at Microsoft.SharePoint.ApplicationRuntime.SafeControls.RethrowExceptionIfNeeded()
at Microsoft.SharePoint.ApplicationRuntime.SafeControls.GetTypeFromGuid(Guid guid)
at Microsoft.SharePoint.WebPartPages.SPWebPartManager.CreateWebPartsFromRowSetData(Boolean onlyInitializeClosedWebParts)
There is no event logged related to this error. I have checked ULS log and nothing much I can find over there.
Any help would be highly appreciated.
Thanks,
Puli
Puli Bala

It is not only because of unsafe controls. Please refer the articles below.
http://www.dotnetmafia.com/blogs/dotnettipoftheday/archive/2008/09/24/safe-mode-did-not-start-successfully-request-failed.aspx
http://blogs.edwardwilde.com/2009/12/22/safe-mode-did-not-start-successfully-could-not-load-file-or-assembly/
https://social.technet.microsoft.com/Forums/sharepoint/en-US/6d81f7b0-33c5-482b-b7aa-9f639c784dea/what-reason-can-cause-the-errorerror-failure-in-loading-assembly-microsoftsharepoint?forum=sharepointadminlegacy
https://paulsiu.wordpress.com/2008/07/24/sharepoint-loading-assembly-error-in-the-event-log/
Puli Bala

I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit). It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation." I am the sole user- please help.

I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit). It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation." This is a stand alone computer and I am the sole user.   Please help.

This is a Microsoft Windows Issue.
From a MS Support Engineer:
"Hi,
·        Is the computer on a domain?
·        Is the issue isolated to only this software or you get the same error message with other software’s as well?
Try the steps below and check if it helps.
Step 1:
Run the software setup file as an administrator and check if it helps.
a. Right click on the setup file of the software that you are trying to install.
b. Select “Run as administrator”.
Step 2:
Temporarily disable the antivirus software running on the computer and check if you are able to install the software.
Disable antivirus software
Warning:
Antivirus software can help protect your computer against viruses and other security threats. In most cases, you shouldn't disable your antivirus software. If you have to temporarily disable it to install other software, you should re-enable it as soon as you're done. If you're connected to the Internet or a network while your antivirus software is disabled, your computer is vulnerable to attacks.
Step 3:
a. Click Start, type "Local Security Policy" (without quotes) and press enter.
b. Click on Software Restriction Policies.
c. In the right pane, double click on the "enforcement".
d. Select “All users except local administrators”.
e. Click Ok and restart the computer and check if the issue is fixed."

Not able to login PIA - An error has occurred. You may attempt to sign in again. If your attempt fails, please contact your System Administrator

One of the user is getting the below error when the person is trying to login ELM system. what could be issue for the specific user and how do we resolve this issue?
"Not able to login PIA - An error has occurred. You may attempt to sign in again. If your attempt fails, please contact your System Administrator"

Its works for other users, its only happened for one specific user only? I didn't check the APPSRV.LOG file? what needs to be checked in APPSRV.LOG, I can ask my infra team to check, because I don't have app server access to check log file.

Error: the system administrator has set policies to prevent this installation

While trying to sync my husband's new iPad 2 to our computer, I encountered the following problem.
I currently have iTunes 10.1.1.4 installed on my computer but was told to update to the latest version of iTunes 10.2.2.
After trying to do this, I received the following error message: The System Administrator has set policies to prevent this installation.
After contacting Apple, Toshiba and Microsoft and following instructions from each of their tech support agents, I am still not able to uninstall iTunes as they all advised me to do.
The latest error message I receive is: You do not have sufficient access to uninstall iTunes. Please contact your System Administrator.
I am the administrator and am signed in as such. As you can imagine, I am quite frustrated.
A solution to this problem would be greatly appreciated.

I received the following error message: The System Administrator has set policies to prevent this installation.
I'd try something relatively simple first. Download and save a fresh copy of the iTunes installer to your hard drive. (Don't run the install on line and don't start the install just yet.)
http://www.apple.com/itunes/download/
Now right-click the iTunesSetup.exe (or iTunes64Setup.exe) that you downloaded, and select "Run as administrator".
Does that update go through any better?

Business rule in MDS 2012 error: A database error has occurred. Contact your system administrator.

I get the following information in my MDS log as well as the above error message when I execute a business rule that has a condition of AND and an Action of Attribute must be unique in combination with 2 other attributes.
I'm running SQL Server 2012 11.0.3000
MDS database version 11.1.0.0
Any ideas?
MDS Error: 0 : SqlException message: A database error has occurred. Contact your system administrator.
at Microsoft.MasterDataServices.Core.DataAccess.DbHelper.HandleExceptions(Exception ex)
at Microsoft.MasterDataServices.Core.DataAccess.DbHelper.ExecuteDataSet(String spName, CloseConnectionBehavior closeBehavior, Object[] parameterValues)
at Microsoft.MasterDataServices.Core.DataAccess.MasterDataAccess.<>c__DisplayClass5.<ValidateEntityMembers>b__4()
at Microsoft.MasterDataServices.Core.DataAccess.DbHelper.ExecuteMethodWithDeadlockProtection(MethodDelegate method)
at Microsoft.MasterDataServices.Core.BusinessLogic.Validations.ValidateMembers(Int32 versionId, Identifier entityIdentifier, IList`1 memberIds, RequestContext context, OperationResult results)
at Microsoft.MasterDataServices.Core.BusinessLogic.Validations.Process(ValidationProcessCriteria criteria, Boolean commitVersion, Boolean validateEntityAsync, Boolean returnValidationResults, RequestContext context, OperationResult results)
SQL Error Debug Info: Number: 208, Message: Invalid object name 'cteDuplicates0a070e37b106b9e3efe35a455076efa7'., Server: SQLRS-01, Proc: udp_SYSTEM_3_38_CHILDATTRIBUTES_ProcessRules, Line: 230
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: udp_SYSTEM_3_38_CHILDATTRIBUTES_ProcessRules, Line: 230
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: , Line: 0
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: udpBusinessRule_AttributeMemberController, Line: 0
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: udpValidateMembers, Line: 0
DateTime=2013-08-15T13:25:15.6684023Z
MDS Error: 0 : <ArrayOfError xmlns="http://schemas.microsoft.com/sqlserver/masterdataservices/2009/09" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<Error>
<Code>208</Code>
<Context i:nil="true" />
<Description>A database error has occurred. Contact your system administrator.</Description>
</Error>
</ArrayOfError>
DateTime=2013-08-15T13:25:15.7152026Z

OK I bit the bullet and contacted support on this one.
There is a known issue with MDS 2012 and business rules with a combination of "must be unique" attributes. If you do not list the attributes in the same order that they were created you will get the generic error I cited. At first they told me it must be
in the same order the attributes are in and that worked on one entity but not the other. The difference was that in the second entity I previously rearranged the attributes in question. Once I changed the order in the business rule to reflect the *original*
order it worked like a champ.
Hopefully this helps save someone some time and money.

Your system administrator has restricted access to this app.

Similar Messages

Maybe you are looking for