Your system does not meet the minimum requirement for this update (9996)

Hi
recently had to reformat my system with windows 7 profesional. All windows updates where performed and all the drivers where installed correctly except the ethernet driver. windows 7 cannot find a suitable driver. I then downloaded the driver from the link provided on the hpe-590t download site, which is described as a intel gigabyte driver sp52222, however  the software driver comes up with the following message your system does not meet the minimum requirement for this update (9996). Has anyone had a similar problem.
Hardware Ids are:
PCI\VEN_8086&DEV_0000&SUBSYS_00008086&REV_00
PCI\VEN_8086&DEV_0000&SUBSYS_00008086
PCI\VEN_8086&DEV_0000&CC_020000
PCI\VEN_8086&DEV_0000&CC_0200
Regards artie 

I solicited the the assistance of another one of our experts who is a driver guru, you may see his reply here:
http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/Paul-Tikkanen/m-p/4990422#M...
I tend to agree that either the NIC is bad or possiblly a factory restore would help.
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Similar Messages

  • This PC does not meet the minimum requirements for this version of iTunes

    Trying to update my iTunes, the installer gives the error message:
    "This PC does not meet the minimum requirements for this version of iTunes"
    I have gone through the procedures listed in the support section, and have completely removed all Apple software, deleted the file folders etc etc.... still no joy.
    This is most annoying as I've just received my brand new iPhone 6+ and I was trying to backup my old device to iTunes so I could restore it onto the new phone and get using it today.  Hacked off big time :-\

    Well I've eventually managed a work-around.  Ver. 11.5.1 was no good because it wasn't compatible with my iphone 5, next one wasn't compatible with my iphone 6+, eventually got 11.4 installed so I could back up my old iphone 5 to it, then restore that backup onto my iphone 6+, which then wasn't up to date with the current iOS so I had to do that before it would sync my apps.
    What a ball ache.
    If someone would kindly let me know when the latest iTunes works again I's appreciate it, until then I'll have to stick with what I've got.
    I need to start again with my music collection, re-import everything and get it on my iphone, because I had to delete it all a few months ago when iOS updated because it didn't have enough storage space on the device!  Somehow lost it all off my iTunes in the process!
    TBH I've always found the Apple system hideously complicated and infuriating when it doesn't work properly.  Instead of making it more and more complex it needs simplifying and making fool-proof so people don't have to go through all this BS just to use their **** phone!

  • Just got this error message - The installed graphics card does not meet the minimum requirements for Aperture

    Help.  I have an iMAC - not even one year old - just got this message - The installed graphics card does not meet the minimum requirements for Aperture.
    I have not made any changes to my machine. Help  - I can't get to my images

    Try restarting your system.
    If that does not help, we will need to know your Aperture version and MacOS X version. And do you use an external monitor? Then disconnect it before rebooting.

  • Help - just got message "The installed graphics card does not meet the minimum requirements for Aperture"

    Help - just got message "The installed graphics card does not meet the minimum requirements for Aperture"

    Please click Profile Update and follow the directions for updating your profile. Your computer may be too old to support Aperture however without knowing anything about your iMac it's impossible to say. Also there is an Aperture forum to use and you can look at Aperture's System Requirements below to see if you have the minimum.
    System Requirements
    Minimum
    One of the following Intel-based Mac computers:
    Mac Pro
    MacBook Pro
    MacBook
    MacBook Air
    iMac
    Mac mini
    Operating system:
    Mac OS X v10.5.8 or v10.6.2 or later
    Memory:
    1GB of RAM
    2GB of RAM required for Mac Pro
    Other requirements:
    DVD drive for installation
    1GB of disk space for application and documentation
    7GB of disk space for Sample Library

  • HT4007 The installed graphics card does not meet the minimum requirements for Aperture.

    The installed graphics card does not meet the minimum requirements for Aperture.  I have not used Aperture in a while and just got this error message.  I tried applying OS updates and reinstalling Aperture and still get the same message.  Does anybody have a solution or work around.

    Are you using a non-standard Graphics Cards?  Then this may be the reason.
    You may also get this error message, if you accidentally booted into "Safe Boot Mode". Then certain extensions of the Graphics card will be disabled and Aperture cannot be launched.
    Reboot and make sure that you this time will boot into regular boot mode.
    See: Mac OS X: What is Safe Boot, Safe Mode?
    If you are indeed running the system in Safe Mode, the question is, what made this happen? Do you use a wireless mouse and keyboard? There is a strange bug that makes Mac OS X boot into Safe mode, if you turn the wireless devices on, while the system is booting. Make sure they are active, before you boot.
    But if you did not boot into Safe Mode, you could try to boot into this mode to reset the graphics card and then boot again into regular mode.
    Merry Christmas!
    Léonie

  • Installed graphics card does not meet the minimum requirements for AP...

    2006 MP with an HD 2600 and a 7300 GT card installed, 8 GB RAM, OS 10.4.11. Tried to install Aperture v1 from CD and got the error message "The installed graphics card does not meet the minimum requirements for Aperture" which disallowed upgrading to v1.5.6 because v1 would not install. So I downloaded and installed the v2 trial and got the same error message.
    The release lever on the 7300 card would not work so I left it in slot 1 for now rather than risk breaking the card. That put the HD 2600 card in slot 2, which is not optimum but I do not think it should cause problems.
    23" ACD connected to the HD 2600 card.
    Ideas? I perused the threads and found similar reports but no solutions.
    TIA
    -Allen Wicks

    Answering my own question, I moved the ACD connection to the 7300 card and v2 Aperture installed OK.
    Now I guess I need to get precise details on how to eject the 7300 card (mainly better directions than Apple's as to exactly what direction to force the release lever toward). I applied way more force than I am accustomed to and the card did not release.
    Comments appreciated, TIA.
    -Allen Wicks

  • My PC (XP, 2 GHz Celeron, 768 M ram) does not meet the minimum requirements for upgrade to version 6, so how can I stop Firefox from nagging me to upgrade?

    I would LIKE to install version 6, but since my machine (XP, 2 GHz Celeron, 768 M ram) does not meet the system requirements there is no reason to continue the annoying nag screens.

    I would LIKE to install version 6, but since my machine (XP, 2 GHz Celeron, 768 M ram) does not meet the system requirements there is no reason to continue the annoying nag screens.

  • Cannot access ADP payroll Our systems have detected that your internet browser version does not meet the minimum requirements for the ADP EasyPayNet payroll application.

    Not recognized carrier
    need to access to process company payroll

    Is this the complete message that your are seeing? https://easynet.adp.com/net5/badBrowser.html
    If so, read the second paragraph. They may only support IE; if so, that is ADPs choice.
    Have you contacted "your ADP service center" per the message that you posted under More Information?
    You '''''may''''' be able to access the site using Firefox by opening IE in a Firefox tab using the following extension. For safety, using this extension or IE directly, you must have the most current version of IE for system and keep it updated.
    *http://coralietab.mozdev.org/installation.html

  • Error: The installed graphics card does not meet the minimum requirements for Aperture.

    I have been using Aperture for nearly 5 years on my MAC Book Pro. I suddenly am getting this message and Aperture will not launch. Any ideas?
    This is my graphics
    NVIDIA GeForce 9400M:
      Chipset Model:    NVIDIA GeForce 9400M
      Type:    GPU
      Bus:    PCI
      VRAM (Total):    256 MB
      Vendor:    NVIDIA (0x10de)
      Device ID:    0x0863
      Revision ID:    0x00b1
      ROM Revision:    3427
      Displays:
    Color LCD:
      Resolution:    1280 x 800
      Pixel Depth:    32-Bit Color (ARGB8888)
      Main Display:    Yes
      Mirror:    Off
      Online:    Yes
      Built-In:    Yes
    Display Connector:
      Status:    No Display Connected

    There are actually two graphic cards in the system, the one you show in your post and one part of the motherboard.
    This is done on laptops to help save battery, when the system does need need high performance graphics, when it is doing text it uses the integrated graphics card, when it needs to do high performance graphics like when running Aperture it switches to the other card.
    It is possible something is wrong with your system preventing it from switching.  What OS version are you running, is it really 10.6.4?
    See MacBook Pro: How to determine which graphics processor is in use to determine which GPU is in use. But if it is not switching you most likely have a hardware problem.

  • New iMac Intel - Hardware Does Not Meet the Minimum Requirements?

    When attempting to load Apeture I get a window pop up during the loading phase that states
    " Your computer hardware does not meet the minimum requirements for Apeture?"
    Any idea what this may be from. I have the new 17inch iMac with Intel processor and it worked before?
    Help woudl be greatly appreciated. This is my first Mac. I switched from a P.C. I have no idea how to even trouble shoot challenges as of yet.
    Thanks

    Hi, and welcome to the Mac.
    Aperture doesn't yet run on Intel hardware. A new version should be available in March, according to a blurb in the lower right corner of this page:
    http://www.apple.com/aperture/

  • We apologize for this inconvenience; however, your system does not meet the requirements necessary to view our media presentation.  I keep getting this message trying to view how to videos on my new iPad mini, does the new full size iPad have the same lim

    'We apologize for this inconvenience; however, your system does not meet the requirements necessary to view our media presentation'. I just received the iPad mini and get this message when I try to view videos.  Does the full size iPad support video play back?

    iPads have the same video requirements. What is the source of the video - streaming, download, from video camera?
    Pad2, the new iPad Supported Video Formats & Movie Formats
    H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
     Cheers, Tom

  • RCU-6002:The specified database does not meet the minimum requirement to

    I did all that is neccessary to let RCU to run but met the issues below. Really,this is not so good for me.pls has anyone a solution to this?
    RCU-6002:The specified database does not meet the minimum requirement to load metadata repository.
    RCU-6080:Global prerequisite check failed - Check requirement for specified database
    The database you are connecting is not a supported version. Enter Database with version equal to or higher than 10.2.0.4.0 in 10g or version equal to higher than 11.1.0.7.0 in 11g. Refer to the certification matrix for supported DB versions
    Mcdonald gabriel

    Hi Dear,
    You need install the database version 10.2.0.4.0 in 10g or version equal to higher than 11.1.0.7.0 with the database character set AL32UTF8.
    Best of Luck

  • I have installed FCPX on my iMac (mid 2007) with a video ATI Radeon HD 2600 Pro 256 MB. Tis does not meet the minimum requirements. It seems to be ok but what kind of problems can I expect ?

    I have installed FCPX on my iMac (mid 2007) with a video ATI Radeon HD 2600 Pro 256 MB. This does not meet the minimum requirements. It seems to be ok but what kind of problems can I expect ?

    Luis Sequeira1 wrote:
    I have run things that are unsupported too (like 10.3 Panther on a Wallstreet Powerbook, anyone remember those? )
    Hey Luis. I not only remember…I still have mine (OS 9)!  Works perfectly well…for some things; just need to be selective about what I ask it to do. (Also have its big brother Pismo running Tiger, which is still an extremely competent machine.) When I take them out of their cases, I'm still amazed at the G3's build quality.
    Russ

  • Best way to announce that the hardware does not meet the minimum requirements

         Hi Everybody!!!
         I'm in the process of tiding my App up, and I stumbled into a requirement that needs to be addressed. I'm not quite familiar with the latest trends, so I was wondering if anybody could recommend a way to inform the user if the hardware
    to use does not meet the minumum requirements.
         In a nutshell:
     * I just created a game using Direct3D / DirectX 11,
     * I'm using "DrawIndexedInstanced", which means that the videocard to use should meet at least DirectX v10 (my shaders are using model 9_3 but I tested it in a computer with DirectX9 model 3 (or so the nvidia brochure said), and the game pretty
    much died in my arms).
     * According to the App Certification Requirements: "if you choose a minimum feature level higher than 9_1, your app must detect at launch whether or not the current hardware meets the minimum requirements. If not, the app must display a message to
    the customer detailing the Direct3D requirements."
     * I know how to detect the Direct3D level supported by the current videocard. What I would like to know is how to tell the user that the videocard does not support the minimum requirements.
         I don't have much knowledge about the current trends:
     * I assume that displaying a message box may not be the best option, as that would mean I need to link the MFC layer to do so (the game is in Visual C++ and that's what I would do if it were one of my day-job projects). I'm quite sure that
    is too much of a library just to show a message box... not to mention that most likelly the MFC is no longer supported in a Metro application...
     * I was thinking about displaying a nice graphic warning about the issue, but if the D3DDevice1 is not what I expect then I don't think I can be sure that at least it can display the graphic with the information.
     * I'm not quite sure if I should be linking to a .NET Library ("System.Windows.Forms" comes to mind), but then again maybe it's too much of a library for just a messagebox.
     * Then again, displaying that message in a command prompt may not be the best idea either.
         Any help is greatly appreciated!!!
         Best Regards,
         Tarh Ik
    Tarh ik

         Hi Chuck,
         I tried your idea, but the game always crashed when calling the DrawIndexedInstanced() function in a computer that only supported DirectX Level 9.1 (plenty of those computers at my day-job, sometimes I swear this office could be
    a museum). The crash started as a driver unload call, and after that everything goes down.
         I also tried using the WARP mode, but the performance was horrible, and after a minute of playing I started to have temperature issues with the CPU (I did not see that one coming)
         What I finished doing was to create two sets of shaders (pixel and vertex):
     * If the feature reported by D3D11CreateDevice was 9_3 or above, I'd use my very own and happy shaders, compiled in 9_3 model. Beautiful performance with DrawIndexedInstanced().
     * If on the other hand the feature reported by D3D11CreateDevice was either 9_2 or 9_1, I'd use a set of shaders compiled for level 9_1. That seemed to be enough to draw a couple of images on the screen and tell the user, using my own game elements,
    that the computer did not match the hardware requirements.
          It looks like this was a good approach. My game passed the certification test, and it is currently on the AppStore.
          Best Regards,
          Tarh Ik
    PS: This posting has been posted "AS IS"
    Tarh ik

  • This system does not have the minimum requirements

    install graphics driver for windows 8.1 64 bit in my laptop (i3 processor).got error in this system does not have the minimum requirements

    Hi: Your notebook is not supported by HP for W8.1. See if the W7 graphics driver from your notebook's support page works. Manually install it if the auto install doesn't work. This package provides the driver that enables the Intel High-Definition (HD) Graphics in supported notebook models that are running a supported operating system. If high-definition multimedia interface (HDMI) video output is supported, this package also installs the HDMI Audio Driver. File name: SP52195.exe

Maybe you are looking for

  • Missing PDF link that is no longer in the document?

    Hello - I have this document that previously had a multi-page PDF linked file. After several iterations the PDF images were removed from the document. Recently our IT had decided to rename our servers so all the links in the document had to be relink

  • Cost center wise expense tracking

    Dear all, We are using the reports KSB1 and FBL3N. When selected for a given period, the ammount displayed in both the reports are not tallying. Can anyone tell me the what could be the reason?,also tell me on what condition will KSB1 report get upda

  • Can't Import from External CD Drive

    I purchased an external cd drive to speed up the importing of my cd collection and it doesn't work with iTunes. When I put a cd in, it pulls up, accesses gracenote, and the little green checkmark circles all appear next to the songs. However the leng

  • W7 and Wxp (2 O.S. active windows) in bootcamp

    Hello all, I've Wxp SP2 working via bootcamp in my Imac. Can I add another windows OS in my Imac in order to have 3 OS (Leopard, xp, and W7)? If is posible how can i do it? Thanks in advance.

  • Looking for 3750 replacements

    Hi, We currently have 3750 switch stacks for our office LAN (6 switches in each stack).  These are now end of life/support and are failing on a regular basis. We are looking to replace them and I am just wondering what people would recommend to repla