Your Time Capsule disk is low on storage space - error

I am getting the error "Your Time Capsule disk is low on storage space." and it now flashes amber. I use the time capsule to set up a wireless network and I can no longer access the internet from my MapBook Pro in another room, only if I am next to the Time Capsule. Help!!! Why is my time capsule low on storage space? I thought it is suppose to delete the old backups to make room for the new backups.

MacDoz wrote:
I too am getting the same low disk space issue on my Time Capsule, and have not been able to find an answer anywhere given that I thought the Time Capsule was meant to automatically delete old back-ups.
Those are two different, independent, things.
Since you can use a Time Capsule for things besides backups, there's a built-in warning (the flashing light) when it gets near full (exactly how full is not clear).
Time Machine is separate; when it doesn't have space for a new backup, it will delete the oldest backup(s) as necessary, if it can, to make room for new ones.
The handling is a bit different, though, for Leopard vs. Snow Leopard.
In Leopard, if you have the +Warn when old backups are deleted+ box checked in Time Machine Preferences > Options, it will fail with a message. All you have to do is remove the check.
In Snow Leopard, it will delete old backups as necessary, do the backup, then send a message if you have the box, now worded +Warn after old backups are deleted,+ checked.
See #C4 in Time Machine - Troubleshooting for details.

Similar Messages

  • "Your Time Capsule Disk is Low on Storage Space" What are my options?

    Hi I just got a message from Airport Utility that my Time Capsule is low on Disk space. My 500 GB Time Capsule only has 25GB of space left. What do I do? Do I have to purchase a 1GB Time Capsule. Can I simply replace my 500 GB Time Capsule with a 1GB Time Capsule. Will the new Time Capsule remember all my network and computer settings? Thanks

    Welcome to the discussions!
    You didn't mention if you were using Time Machine for your backups to your Time Capsule, but I will assume that you are.
    Some users reason that they don't need all the backups from many months ago and elect to erase the TC and start over with a complete backup. The risk here is that you have no backup until the new full backup is completed.
    And, if you have transferred files from your computer to the TC and then deleted the files on your computer, you lose those files if the TC is erased.
    In theory, you don't need to do anything as Time Machine will simply start to delete the oldest versions of backups to make room for new backups. My 500 GB TC ran out of space a few months ago. I used to be able to see how my computer looked a year ago. Now, I can see how how it looked about 11 months ago.
    If you want to preserve every backup since day one, then you will need to add more storage space. If you purchase a new Time Capsule, Time Machine backups will continue on the new machine.
    If you get a new Time Capsule, there would be very little configuration required. Basically, the new device would be setup as a bridge to the old Time Capsule using a short ethernet cable. You would need to reset Time Machine by pointing it at the new Time Capsule for backups.

  • Can I connect an external HD on the time capsule and use it as storage space ?

    Hello,
    I am thinking about purchasing a time capsule for backing up my data, but I also need storage space for photos and videos, can I connect an external hard drive to the time capsule and use it as storage ? If so, is there any risk of the time machine use the external hd space for backup as well and eat up all the storage ?

    can I connect an external hard drive to the time capsule and use it as storage ?
    Yes....for storage, as in backup files.  But, not recommended for "working" image or media libraries.
    If so, is there any risk of the time machine use the external hd space for backup as well and eat up all the storage ?
    No, unless you intend to also use the same drive for Time Machine backups.

  • Time capsule works as router but storage space and all data has disappeared!

    I have used my apple time capsule for about 3 years. Suddenly the time machine stopped backing up and I can not view backups or access any/all other data that was on the internal HD. The TC still works as my wireless internet router. Please help me. I am afraid that I have lost all of my children's pictures etc. I continue to get the error "Operation could not be completed. OSStatus error -6602" when I try to use it for time machine. I have looked at many of the "fixes" on here with no luck.

    Have you tried the things in #E4 of Time Machine - Troubleshooting?
    Your backups are on the Time Capsule, right?
    Where are the originals -- on your internal HD?  If so, are they intact? 

  • Cannot Access Time Capsule Disk from Boot Camp

    Hi,
    I've set up a Time Capsule and I've been able to read and write from:
    1) My MacBook Pro and another MacBook
    2) A Windows XP (SP3) PC connected by Ethernet
    3 )A Dell Laptop running Windows XP (wirelessly)
    I can copy files to and from the disk and perform Time Machine Backups (on the Macs).
    However, I have not been able to even connect to the disk (but I can use the internet normally) on the Time Capsule on my MacBook Pro Boot Camp Windows XP SP3. I can connect wirelessly and surf the net on the 5 Ghz (and 2.4 Ghz) (non-public/Guest Shared) network. (The password I entered to access the disk are the same on all machines listed, which was not confused with the Network Password) Does anyone face such a problem or know the cause/fix?
    Thank You in advance.

    I use FileBrowser app. It works. Their latest version is much easier to configure than earlier versions. You need to turn file sharing on and SMB on your time capsule disk.
    I use the time capsule disk to store a few files which I never want to be on my iPhone or iPad, but do want access to them. They are not backed up on the time capsule but since they also exist on my Mac, they are backed up from there.

  • Access Time Capsule Disk from Linux Fedora

    From my Linux Fedora, I am connected to the main wireless network for the TC. When I go to "Browse Network", I can see 2 destinations named M's TC (FileSharing), when I try to access the first one it opens but has no content at all! While the other one gives an error:
    Could not dispaly "Ms-TC.local (afp)"
    The file is of an unknown type
    Do you know how can I access the TC disk from Fedora?
    Thanks.

    I use FileBrowser app. It works. Their latest version is much easier to configure than earlier versions. You need to turn file sharing on and SMB on your time capsule disk.
    I use the time capsule disk to store a few files which I never want to be on my iPhone or iPad, but do want access to them. They are not backed up on the time capsule but since they also exist on my Mac, they are backed up from there.

  • Access Time Capsule disk from iOS device (iPad, iPhone)

    My intended goal is to use Time Capsule disk as cloud replacement for MobileMe iDisk which is being discontinued in June.
    I've done Time Capsule 7.6.1 update with iCloud support, entered my iCloud account settings, and authorized disk access via WAN. Everything appears to be configured properly as I can access my Time Capsule disk on Mac computers from outside my home network. How do I access this disk on iPhone and iPad?

    I use FileBrowser app. It works. Their latest version is much easier to configure than earlier versions. You need to turn file sharing on and SMB on your time capsule disk.
    I use the time capsule disk to store a few files which I never want to be on my iPhone or iPad, but do want access to them. They are not backed up on the time capsule but since they also exist on my Mac, they are backed up from there.

  • There is a problem with your airport time capsule disk

    Hello,
    Since I got my airport time capsule and set it up, I got an error "there is a problem with your airport time capsule disk" and disk is not listed for setup or erase. The LED is flashing amber sine I turned on the first time.
    The wifi is working fine as well as the internet connectivity.
    I got the device from the online store and was shipped to my address in the states but I opened the box the first time in Saudi Arabia as I left the states immediately after receiving it.
    Any advise on fixing this or a near by apple support center where I can get it in for repair / replacement?

    Any advise on fixing this or a near by apple support center where I can get it in for repair / replacement?
    I would first suggest that you perform a "factory default" reset on your Time Capsule (TC).
    If that fails to remedy the problem, you can obtain technical support from Apple here.

  • How to use AirPort Time Capsule 2TB as an external storage hard drive only?

    I have a new AirPort Time Capsule 3TB, now I want to use my AirPort Time Capsule 2TB as an external storage hard drive only, how do I it? 
    I would like to  connect the AirPort Time Capsule 2TB directly to my Mac Pro. using OS X 10.7.5.
    I have erase disk and reset the 2TB to factory default, after that, I cannot make it to connect to my Mac.  Please help.

    The 2TB Time Capsule needs to connect to your 3TB Time Capsule using a wired Ethernet connection.
    Connect from a LAN <--> port on the 3 TB Time Capsule to the WAN "O" port on the 2 TB Time Capsule and configure the 2TB Time Capsule in Bridge Mode and turn off the wireless function on the device as well.
    Once that is done, you can connect your Mac directly to the 2TB Time Capsule using another Ethernet cable, or your Mac can connect to the network using the normal wireless network, if you prefer.

  • How do I expand the storage of a time capsule that has run out of space?

    In supporting the three Macs in our family, our little 1Tb Time Capsule has run out of space and now does not backup any of our Macs.  No surprise since the total storage of our Macs is 2.25 Tb.  So ... can I just add a large external hard drive to my Time Capsule and point, say, 2 of my Macs to it with Time Machine and everything will be good again?
    Thanks for any suggestions,
    Dean

    Several options.......
    Simplest and least expensive.....erase the Time Capsule disk and start over with new backups from all the Macs. Few of us ever go back more than a few days to a week or so to pick up a file that was accidentally deleted or somthing similar....but I understand that some users find it difficult to part with the old backups, even if they will never use them.
    Yes, there is the very tiny chance that if you erase the Time Capsule and a Mac fails before you can back it up later today.
    Cost of a new hard drive......add a USB drive to the Time Capsule and point each Mac there to continue backups. The downside.....Time Machine will make a new complete backup for each Mac first, and then run incremental backups.  The upside....you keep your "old" backups on the Time Capsule if you cannot part with them.
    Painfully slow and not worth the effort......manually delete old backups from Time Machine to create more space on the Time Capsule for new backups. This will take weeks in terms of time, and the Time Capsule will soon be full again, ao you have to repeat the process again in the near future.

  • Unable to delete files from Time Capsule disk

    A while back I copied my user folder from my iMac on to my Time Capsule disk, which is mounted as a drive on my iMac's desktop. I now want to delete that copy. After some struggling with locked files I have managed to get it so that all I have left is a small hierarchy of folders containing no files. When I try to delete any of these folders, though, I get the error message: "The operation cannot be completed because you do not have sufficient privileges for some of the items." Info says that I have read & write privileges to every folder in the hierachy.
    Can anyone suggest a way that I can get rid of these few remaining folders? They are really bugging me!

    Some of you are going to love this!!
    Ok, after talking with someone at Apple, I was reminded of a simple Unix Command to do the job, even on Time Capsule. Here's what worked for me:
    Time Capsule is connected to my Mac, via an Ethernet cable-- I don't know if this matters or not, maybe it will work over the wireless connection too, let me know!
    You'll need to pull up Terminal in Applications > Utilities. It's a dangerous tool that Unix and Linux people use with skill all the time, but you have to be careful, cause it will cause permanent changes-- that is what I want here, of course. Just be extremely careful, ok? You have been warned.
    type "cd /Volumes"
    press Return
    Now you're in the "Volumes" folder
    type "ls" (as in the letter L)
    press Return
    You should see your Time Capsule folder (whatever you named it)-- type "cd " and that particular name
    Navigate till you can type "ls" and you can see the folder you are trying to delete.
    Then, the command that worked for me is this:
    (Please double check that "myFolderToDelete" is indeed the one that you want to delete!)
    sudo rm -rfd myFolderIWantToDelete
    After a few seconds for the hard drive in the time capsule to spin up, it worked! Yea!
    In fact, to be safe, if I were you, I would even go into Finder first and try to rename that folder, call it "myFolderToDelete" !!!
    Why didn't I try this before? I've used Terminal, I should have thought of it before! bad nerd!
    But the important thing is, problem solved .
    A few things to note is that I was trying to delete a folder full of "Locked" files. If I wanted to delete several locked files that are not currently in a folder, I could make a new folder, and drag those files into it... now you have a folder you can delete. Just rename it "toBeDeleted" or something like that.
    Finally, note that I am not currently using Time Machine (the automated backup program) with this Time Capsule, so I don't know if it will delete the Time Machine backup -- haven't tried that yet.
    Good Luck!

  • I want to use my airport time capsule as a network attached storage solution, is this possible or do I need to connect a separate hard drive?

    I want to use my airport time capsule as a network attached storage solution, is this possible or do I need to connect it to a separate hard drive?

    The Time Capsule is by default a network hard drive, but it has no "brains" of it's own. So, it cannot function as a stand alone media server if that is what you are asking.
    If you are also using the Time Capsule hard drive for Time Machine backups of your Mac(s), then there may be struggle for available space on the drive since it is not possible to partition the Time Capsule drive in a traditional manner.
    If space is getting tight on the Time Capsule, it might be a good idea to connect a drive to the USB port on the Time Capsule and use that drive for your network storage needs.

  • Time Capsule Disk & VPN

    I just purchased a Time Capsule for a home network and backing up using Time Machine. I have a MacBook Pro, a MacBook, and a Windows XP Professional PC that I use for work. All is working beautifully; however, I cannot connect to the Time Capsule's disk from the Windows PC while connected through my corporate VPN. I am using Cisco VPN Client V 4.6.03.0021 and connecting via TCP. When I DISCONNECT from the VPN on the Windows PC I am able to browse the Time Capsule disk just fine. Is this a known issue? Same thing happens with a Bonjour printer connected to a 802.11g Airport Expess. The printer is not visible until I disconnect from the VPN. All software and firmware are up to date as of 3/20/07.
    Message was edited by: watkinsmd

    I'm having the exact same problem and now I'm much less excited about TC now because I have to be behind VPN a lot. Though, I was thinking about a far-less-than-perfect workaround which is to connect to TC directly from my PC using a USB-to-USB cable (while connected to the VPN network), just for occasional file transfer needs. Do you all think it would work? I'll give it a try sometime next week when I return home from my trip. (If you've ever tried before, I'd really appreciate your sharing.)
    Thanks,
    ekko

  • Time Capsule Disk not mounting

    Since a couple of days, my 2 TB Time Capsule (1st generation, software version 7.6) disk (2 partitions) will not mount. Neither does it show up in the TimeCapsule preferences list. It has a wired ethernet connection with my MacMini and I use AirPort with my MBP and iMac. AirPort (sofware version 5.5.3) still works. I tried resetting, going through the fast-and-slow amber blinking lights, and the light on front is green again. What is the problem and do I get access to my data?

    sterrenman wrote:
    Since a couple of days, my 2 TB Time Capsule (1st generation, software version 7.6) disk (2 partitions) will not mount.
    I'm curious: How did you manage to partition the internal disk of your Time Capsule?
    The first 2TB Time Capsule was a 2nd generation model.
    Neither does it show up in the TimeCapsule preferences list.
    Please explain what you mean by "the Time Capsule preferences list".

  • Time Capsule Disk is very slow

    Hello,
    I'm using 10.8.2 and I just bought a Time Capsule 2TB for my backups.
    I have tried to use Time Machine to backup my data (about 200GB) via our wifi network. My MBP (Retina mid 2012) stands at a distance of 2 meters from the Time Capsule.
    It took about 16 hours and at 90% it crashed.
    After that I used Carbon Copy Cloner to backup my data manually. I think I will go on with this methode, because I will have instant access to my data.
    CCC did the backup a bit faster (about 12-13 hours). Copying other files to the Time Capsule Disk is also slow (about 7-8 GB per hour). Navigating is also slow.
    I turned off Spotlight completely without a difference in copying speed.
    I think (and I hope) this Time Capsule disk could be faster. Is this a bug? Are there workarounds?
    Thanks a lot!

    -To sum up things: The setting "DHCP + NAT" delivers fast copying speeds
    Yes. You will eliminate the backroute to the fiber modem or maybe even back to your ISP - depending on their setup.
    The standard setting of the router is "DHCP + NAT" right?
    Normally the standard setting is good enough to obtain an internet connection instantly (without filling in IP, DNS etc. manually).
    Yes, you shoudl not have to fill in those details. Should work straight away as your MBP gets thos edetails automatically (yes?)
    best to reset the Airport Extreme to defaults and connect it again using DHCP / NAT

Maybe you are looking for

  • Error while running ABAP web service

    Hi, I have WAS 6.4 with ABAP STACK and NetWeaver '04. I created an ABAP web service, it was deployed successfully, but while running it I am getting an error that "Settings for J2EE do not exist". Do I need to configure anything to rectify this error

  • Unit test code problem

    I'm doing my first proper unit test and I get an error, think min_size> is the problem Element type "application" must be followed by either attribute specifications, ">" or "/>". this generated code <?xml version="1.0" encoding="utf-8"?> <!-- This f

  • When I using  MB_MIGO_BADI to add a tag how to input the value to MESG.

    Dear All I was bulide a tag on T-CODE MIGO and put two field in the tag, Can anyone know how to put the two fields value to MESG table. Please provide some sample code. Thanks So Much. Terry

  • After installing OS X v10.7 Lion I have no sound. Help!

    I was listening to my itune before installing. So I download  The new OS X v10.7 Lion only to find that I have no sound at all. Has someone come up with the same problem after downloading the new OS Lion. Help!

  • All of my photos have disappeared from PSE Organizer 13 (after I upgraded it).

    All of my photos have disappeared from PSE Organizer 13 (after I upgraded it).  The files are all on the HD.  When I try and reimport them, Organizer says they are already in there and will not allow me to proceed.  When I highlight a keyword, Get th