Your username and/or password are invalid

Hi,
I am new to Oracle.
I just installed Oracle_10g on XP.
The installation was successful except I get the following error message:
Your username and/or password are invalid
I can log in using sqlPlus, its the EM that is the problem.
Could it be a conflict with another java version?
Thanks

Hi,
It was confusion with all the different passwords and the "Connect As" pull-down in EM.
As a matter of fact, now that I'm past that, I get tripped on a licensing information page.
I don't really like EM, but I can work around it for now.
Thanks.

Similar Messages

Error:Your username and/or password are invalid when trying to login to EM.

Hi,
I had installed Oracle 10g but after it is installed, I am unable to use system/oracle to login to Enterprise Manager.
Login to Database : ORACLASS
User Name : system
Password : oracle
Connect as : SYSDBA
It says "Your username and/or password are invalid."
Can someone assist to advise me on where might have gone wrong.
I am able to connect via command line
sqlplus system/manager as sysdbaThis allows me to get into the environment. Had been working on this for a few days. Had already installed the Loopback adapter. Thanks alot.

You can connect by means of the CLI because you are authenticated by the OS as a privileged user who belongs to the oracle dba group, so even if you changed the password to whatever, as long as you get connected to the sysdba role you will be allowed to sign in to the database. Just try it, change the password to any other string and you will successfully get connected.
Now, once you have tried this test, you may find you have typed the wrong password for system when you try to use it to connect by means of the EM. I suggest you to reset the password for the user and ensure the user you try to use to connect with the EM has the SYSDBA privilege granted, or use the SYS user connected as SYSDBA.
~ Madrid

Your username and/or password are invalid in OEM Console

Hi Gurus,
I have a User 'CIS57' and used that to connect as sysdba using the OEM console all the time and was working fine.
Now I am only able to connect to the DB using the SYS as sysdba in the OEM Console and not able to use the CIS57 as sydba anymore.
Any reason why I am not able to connect using this userid in the OEM console. I used this user CIS57 to connect as sysdba all the time.
Not sure why not able to connect using the same credentials now. Please advice
Thanks
Sheik

if that is the case How was I able to connect before
like
cis57
userpassword
sysbda
in the oem console login.
Note: the Oracle version is 11.1.0.6.0
All this connection issue ( using the cis57) user started when one of teh script was asked to run by teh Oracle supports services for a flashback recovery area issue and that crashed the instance and the instance had to be brought up by creating a SER 1 SR with Oracle support.
So they were playing around with teh oradim, pwd files and other parametr file setting while troubleshooting the issue.
Thanks
Sheik

Host Credentials ERROR Invalid username and or password Oracle 11g

Hi,
This error has been bugging me for sometime now and I can't find a straight forward answer anywhere, can you help?
Oracle 11g on Windows XP SP2 Intel box.
I am trying to export data and when I'm asked for the Host Credentials I get the error
" ERROR Invalid username and or password "
I have tried the following syntax for Username:
<domain name>\Administrator
<domain name.local>\Administrator
<domain name>/Administrator
<Local host name>\<domain name>\Administrator
I have gone through making sure that the local security policy settings are correct.
I have added domain and local Administrator to the ora_dba Group.
All services relating to Oracle are running.
I can connect via SQL Plus with no issues.
I can connect to EM locally and from my client pc with no issues.
Any ideas, please, can anyone help me?
I'll gladly furnish you with any info I can to get past this seemingly simple step!
Regards
naexpert.

Trying to understand your reply, here is what I did:
Created new Windows user called OraAdmin.
OraAdmin is now member of administrators group and Ora_dba group.
Logged onto EM at server and used System user logon.
Data Movement
Export to Export Files
Tables
Host Credentials
Tried
OraAdmin - failed
oracle-11g\OraAdmin - failed
oracle-11g/OraAdmin - failed
Don't know what else to do......

When I try to send email from my iPad and iphone it says that I have the incorrect username and/or password, but I know they are correct, can someone help me?

When I try to send email from my iPad and iPhone it says that I have the wrong username and/or password, but I know they are correct. Can someone help me?

"Your email account" means to tap on the name of your email account. Whatever it is listed as in the settings.
In my mail settings, one of my email accounts is a Comcast account. I tap on the Comcast name and it brings up this window.
Then I tap on the arrow under the Outgoing mail server smtp setting to get to the next window.
In the resulting window, I then tap on the arrow next to the smtp server under the Primary Server setting.
That brings up this window in which I check to make sure that my user name and password have been entered correctly. If those items are missing, enter them in the appropriate fields and then tap done.

I keep getting an error message when trying to connect to sync on my Android saying the user name and password are invalid.

I am using Firefox 4.0 Beta 7 on both my Android as well as my laptop. I am trying to set up the sync feature and keep getting the error message on my Android saying that the username or password are invalid. I have tried uninstalling and reinstalling, I have tried changing my password. I continue to get this error message.

Can you try again with Firefox 4.0b8 (desktop) and 4.0b3 (Android)? We have changed the way that Sync setup works, and it no longer requires entering the password and sync key by hand.
For details, see: http://blog.mozilla.com/services/2010/12/22/easy-setup-for-firefox-sync/

Apply patch to 11gR2 through OEM - ERROR: Invalid username and/or password

I am trying to apply a patch to an 11gR2 database (11.2.0.1.0) running on AIX 6.1. Using Oracle Enterprise Manager, I click on 'Software & Support' on Database tab, click on 'Patch Advisor' and click on 'Stage Patch' link. I use 'Search by number', locate the patch, click Next etc etc - select target, enter Oracle Home credentials etc. Finally I submit the patch job, and, after a minute or so I am getting 'Step: prereqCheckOnHome Initialization Error'. When looking at details of the step, I can see only:
Error Log
ERROR: Invalid username and/or password
I am at fault to understand which username/password is being referred to. I have checked Oracle Home credentials by running an OS command job with these credentials - job completed fine.
Obviously, patches can be applied the 'old' way - using OPatch from command line and then runing necessary SQL scripts, but I wanted to try new 'civilized' approach.
Anyone had this issue and know how to tackle it?
Alex

Thank you for advice. I made checks for nmo/nmb binaries permissions and made sure filesystems are mounted without nosuid option. Also, I re-entered preferred credentials (and tested them, wheneve rpossible). Enabled authentification tracing as per document, got following in emagent.trc when performing patch procedure:
2010-06-20 00:48:26,847 Thread-1066 DEBUG Dispatcher: Request ID = 2273, type = 10640, Timeout = -1
2010-06-20 00:48:26,847 Thread-1066 DEBUG Dispatcher: Adding wrapper context for request ID = 2273, batch = 0, type = 10640
2010-06-20 00:48:26,847 Thread-1066 INFO Dispatcher: nmemdisp.c: Entering nmemdisp_StreamOpReq
2010-06-20 00:48:27,327 Thread-772 INFO Authentication: Default nmo binary has setuid permissions
2010-06-20 00:48:27,327 Thread-772 DEBUG Authentication: nmejcap.c :_adjustArgsForPDP args[0] = /app/oracle/product/11.2.0/perl/bin/perl
2010-06-20 00:48:27,340 Thread-2604 DEBUG Dispatcher: Adding abort context for ID = 2273
2010-06-20 00:48:27,386 Thread-2604 DEBUG Authentication: nmejcap.c: buf=''
2010-06-20 00:48:27,386 Thread-2604 DEBUG Authentication: nmejcap: read error 7 from process
2010-06-20 00:48:27,850 Thread-2604 DEBUG Dispatcher: Removing abort context for ID = 2273
2010-06-20 00:48:27,850 Thread-2604 DEBUG Dispatcher: Removing wrapper context for asynchronous request ID = 2273
Apparentry error happens in the Perl procedure and it is not being recorded in the log file. Any further advice?
OEM Version I am using: Oracle Enterprise Manager Database Console 11.2.0.1.0
Edited by: ultradumb on Jun 20, 2010 1:18 AM

Ical "authentication failed. your username and password were rejected by the server"

i've a pretty busy server, fully configured with correct DNS.
running 10.6.8, uptodate. i've stopped the ical service, and removed it from the server settings.
then i created a folder on my RAID /volumes/raid/ical, set its ownership to _calendar:_calendar (uid 93), rwx,rx,-
then added the iCal service back, and set the data store to this new folder.
authentication is set to digest (to reduce potential kerberos errors), with SSL on.
i then started the service
an existing user CANNOT connect to the caldav server. i get the error: ical "authentication failed. your username and password were rejected by the server".
if i create a NEW user, that user can correctly connect to the Caldav server. On first joining, an entry is created in the __uids__ folder and the calender works.
SO. WHAT IS GOING ON?
this is 10.6, so i do not have an option in WGM to 'enable calendering'. i've used the inspector to check for differences, but i can't see any.
help. please. and no comments about DNS. the fact i can get a new user to function means that is excluded. no comments about SSL. ditto. no comments about kerberos, its turned off. thanks.

I often think of things in terms of time it takes to figure out the solution to the problem vs time it takes to nuke and pave.
Dare I ask... How many users would you have to remake?
150 users would probably take 2 hours to recreate?
...Have you spent 2 hours on this problem yet? How about 4 or 6?
Perhaps you could have typed up 450 remade users so far!
I have a great idea as to how to change ownership of home folders to users after they're created.
Thoughts on the problem... (but don't spend too much time on it!)
What about crypt vs open directory password?
In WGM, select the user, click the advanced tab, and ensure that your users have OD based passwords?
...sometimes that pull-down menu displays OD, but it's not really. Try selecting OD, retype the password there, and save.
See if it works.
What about in server admin.... Select the server in question, click the access button at the top.
Ensure that your services are allowed for all users to use the iCal service.
In the iCal service in Server Admin...
Host name setting? It's a stretch as new users seem to work. Ensure it's correct?
For the sake of argument... Change authentication type to Any Method... If you're running OD on the server, Kerberos is running. I know that certain services require it even though you have the option. Perhaps iCal is being finiky without it?
I apologize if you've tried all these, but as a user forum, you'll typically get users that don't believe that you've tried the basics. It's honestly the best place to start. Seeing as we don't know what you've done, it's the best advice you'll get.
HTH
-Graham

RemoteOperationException: ERROR: Invalid username and/or password

Hi, i have problem when i try to shutdown database throught database control
i entred the right password and i tried both authentication external password and operating system authentication but i received already this error
RemoteOperationException: ERROR: Invalid username and/or password
Please suggest me any solution this solve this probelm .
Thanks in advance.

Abdelhadi_DBA wrote:
to sb92075-->thanks for your patience ,please what is reproducible test case?
to Srini Chavali-->
Os xp sp2
database version 11.2.0
when i use sqlplus it is no problem
sqlplus / as sysdba --> system authentication
shutdown immediate
-->it work fine
and
sqlplus sys as sysdba -->password authentication
shutdown immediate
-->it work fine
both cases above do NOT use SQL*Net & do NOT use any password.
Enter "FOOBAR" for password & it will succeed!
But when i tried to shutdown the database trought the database control ( i tried system authentication and password authentication) i recieved RemoteOperationException: ERROR: Invalid username and/or password.
Thanks in advance.

HT201320 when i feed all details in mail like username and password than i click on sign-in option it shows your username and password incoreect but username and password is correct?

i did not able to use mail. i go to add account and where i am given all the details correct like username and paasword but after i click on sign-in option it shows your username and password is incorrect...

You only think the username and password are correct; when you create an account the phone asks your mail provider to validate the username and password, and if it fails you get that message.
You know that you must enter a username and password twice, once for incoming and once for outgoing mail?

HT1430 I just upgraded to an i5 and I'm unable to send emails. It says my username and or password is incorrect, however all of my settings are the same as they were on my previous phone. Any ideas?

I just upgraded to an i5 and am unable to send emails. I can receive them however every time I try to send an email I get an error message saying my username and or password is incorrect. My settings are exactly the same as they were on my old phone... Any ideas?

Contact your email provider and verify you have the correct settings

Unable to email photos, receive a statement that the server does not recognize my username and or password, have checked multiple times that these are correct

I am unable to e-mail photos, receive a statement saying that the werever does not recognize my username and or password. I have checked multiple times and these are correct.

The box comes up that says "server does not recognize username or password".
That error message usually will pop up, when there is a conflict between the "From" setting for the mail account you are sending from and the selected outgoing mail server. Probably the outgoing Mail server is receiving a user name and password it does not understand. When the mail returns unsent, do you see the "Try again" panel with the option to select a different outgoing mail server?
If you do not see this panel, change the Mail "Preferences > General" to "If Outgoing server is unavailable: Show a list of alternate servers". This way, you will know, which server Mail is trying to send from.
Have you tried to set "From" pop-up menu to one of your other email addresses? If that works, change your settings in Mail to always send from this address. You can set this option in the Mail "Preferences > Composing: Send New Messages from". I have my "Send New Messages from" set to "iCloud". That is working best for me with iPhoto.

Why does the mail app think my email username and or password is wrong, when they are correct?

I used to be able to check my AOL email through the mail app on my ipod touch. Recently it has been telling me that my username and/or password for my AOL email is wrong. I checked my username and password by logging in to my email on my computer. I tried deleteing and readding the account. Restoring then readding. I am able to use my gmail accounts on my ipod touch.

Hi,
Is your AOL account an AOL Kids account? I have seen problems with AOL Kids accounts before in Apple Discussions. Try a forum search and see if anything useful comes up.
Hope this helps!
---likeabird---

I am trying to log onto a Mac Mini I haven't used in awhile and I forgot the password. I am trying to reset the password with my apple ID but the computer keeps saying the Apple ID and the password are incorrect whenever I know they are.

I am trying to log onto a Mac Mini I haven't used in awhile and I forgot the password. I am trying to reset the password with my apple ID but the computer keeps saying the Apple ID and the password are incorrect whenever I know they are, as I am using the exact same ID right now.
I have switched my password in the past, so my theory is my mac mini thinks that my password has not changed and it will not update because The Wi-Fi password has also changed so it cannot connect to any servers...Does that sound like I am on the right track?
Is there a way to update my Wi-Fi password (saved into the computer) without logging on?

If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
 ▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.

I have Mac mini 2.0/2x2gb/2x500/AP/BT, and i forgot the username and the password. How can I resolve the problem?

I have Mac mini 2.0/2x2gb/2x500/AP/BT, and i forgot the username and the password. How can I resolve this problem?

The username is the name attached to your Home folder - /Users/username/. If you don't know the password then it can be changed but you will need the installer DVD that came with the computer for the installed version of OS X. You have not provided that information.

Your username and/or password are invalid

Similar Messages

Maybe you are looking for