Your workout data could not be sent to nike+ because the data could not be

i have been getting this message while uploading data in itunes after using a cybex arc elliptical machine.
"your workout data could not be sent to nike+ because the data could not be validated by our server."
anybody else have this problem and/or solution?

Hello balbew,
It looks like you haven't been the only one recently.
http://forums.nike.com/thread.jspa?messageID=330025
Try waiting another day or two or trying at a later time to see if that makes a difference.  It could very well be a server side error.
B-rock

Similar Messages

  • Could not save as (file name) because the file could not be found

    When i try saving sothing it comes up with could not save as (file name) because the file could not be found and need to save this file. i could save stuff before but not anymore if anyone could help i would be grateful
    im using photoshop cs5.1
    Thanks keiron

    We cannot know. These kinds of things are operating system errors with stuff getting blocked due to insufficient permissions, security tools interfering, network errors or whatever. Since you mentioned none of that, it's an "Ask your mom..." thing at this point, but if you provide more details, someone might be able to figure it out.
    Mylenium

  • Photoshop wont open get error could not open a scratch file because the disk is not available

    Had to clone my hard drive to another drive on my computer.
    I have been receiving a message "Could not open a scratch file because the disk is not available"  I have tried UN-installing and re-installing...still the same message.
    Does anyone have any idea how to fix this?
    Thanks!

    What do you have here.
    If that does not help, reset your prefs
    Hold fingers over Shift Option Command (or similar on Windows) then boot Photoshop and as fast as you can depress the 3 keys.

  • TS2830 When I synch my  phone or other devices to itunes, I get a message that the following songs could not be synched to itunes because the file could not be converted. However, these are songs that I bought directly from Itunes.  Any suggestions?

    When I synch my  phone or other devices to itunes, I get a message that the following songs could not be synched to itunes because the file could not be converted. However, these are songs that I bought directly from Itunes.  Any suggestions?

    Hello rafagee,
    I understand that you are not able to sync a few songs you purchased from iTunes to your iPhone and other devices.  There may be an issue with the file, but if you have the Apple ID and password used to purchase the songs, you can redownload them.  You can even download the song directly to your iPhone.  I found an article that will give you steps to do this on your computer and on your iPhone:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/ht2519
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • How do I fix my photosop when is says that it could not load FastCore Routines module because the file was not found?

    Every time I try to turn on Photoshop a pop up shows up and says "Could not load the FastCore Routines module because the file was not found." How do I fix this?@

    Here is a solution for an older version of Photoshop with a slightly different message, but it might be the same reason—trying to use older PS plug-ins with a newer version of PS:
    http://helpx.adobe.com/photoshop/kb/error-could-load-fastcore-multiprocessor.html

  • COULD NOT OPEN A SCRATCH FILE BECAUSE THE DISK IS NOT AVAILABLE

    Any thoughts?  I can't open the program.
    I have a mac pro with four drives who thought I just finished a successful install of legit academic version previously used by myself only.  Production Premium CS5.
    Matt

    There's no image "attached".  You can't show an image if you are accessing the forum through e-mail.  Any file attached to an email will just disappear into cyberspace, without anyone ever seeing it.
    To embed an image in a post, use the camera icon in the Reply Editor in the forum's web interface using your web browser.
    Back to your issue:
    You need to trash your Photoshop preferences by holding down Command+Option+Shift as you launch Photoshop until you get a dialog box allowing you to delete your preference settings. 

  • Could not load default Extrusion presets because the file was not found.

    Hello,
    I am getting the above error when starting photoshop CC.
    I am working on an iMac with 10.7.5 system software.
    I can find the 'Default Extrusion Presets.p3e' file in the repousse folder but not elsewhere and dont know if it should even be elsewhere?
    Thanks

    So there's something wrong in my whole system, where I'm using all kinds of different tools (big and small tools) for my various projects without a single hitch... but somehow photoshop has encountered a problem within his own set of files.
    Again, a problem that photoshop error checking capabilities shows as a single file missing, which one would thing that's like a 5 min solution, but no. The entire monster needs to be reinstalled.
    You understand my login right?

  • When I'm trying to sync my iPad with iTunes on my MacBook Pro, i keep getting a message that certain recent purchases (TV shows) won't sync because the computer is not authorized.  But, it IS authorized!  What's going on here??

    I've recently upgraded my iPad to OS 5 and I am running iTunes 10 on my MacBook Pro.  For some unexplainable reason, I'm now getting a message that items (mainly TV shows I've purchased through iTunes) are not able to be downloaded because the computer is "not authorized."  But the computer IS authorized.  I follow the instructions to "authorize" it and, of course, I'm then told that the computer is already authorized!  Still, the downloads won't sync.
    Can anyone help me out with this?

    I have the same problem. It is only with tv shows and only with programs I have downloaded after the software update.
    Apple support sent me the above link too....but it doesn't solve the problem...my computer is authorized and the content is in my library and will play on my Mac air, but it will not sync the tv shows, it keeps saying my computer isn't authorized for it.
    No answers here, but you are definitely not alone with this issue.

  • Exchange 2010 "This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80004005-00000000-00000000].

    Exchange 2010 "This message could not be sent. Try sending the message again later, or contact your network administrator.  Error is [0x80004005-00000000-00000000].
    In a mixed client environment, mostly Outlook 2010 & 2013 clients. Only Outlook 2013 clients (about only 4 mailboxes) are receiving this error immediately after sending an email. My temp band-aid at the
    moment is to: from the client, go into the "address book" & select a different address book like "Contacts" & then select the address again & select the Global Address List, which is the default. (it will have the users email
    + at the beginning of the field, it reads, Global Address List - (email of the user), then I close Outlook & open it back up, & the problem is solved. But on some mailboxes, not all, the issue comes back. From my research, I know that our individual
    mailboxes do not send out over 500 emails in one day. Most users will send out maybe 20 or 30 in one day, so I don't think it's that. 
    But I'm not sure if this is related, but I have noticed that the log files for the Exchange 2010 seems to only hold logs with date stamps of only a couple of days. It used to hold log files indefinitely until they were archived, deleted, etc. So, this is
    a new, unusual issue I have seen as well. 
    We have 2 .edb's, one active: 78 GB's and one disabled at 7 GB's. Exchange 2010 is running on Windows Server 2008 r2, Enterprise Ed. We have had Exchange 2010 running now for about almost 2 years now and this is the first time this particular issue has come
    up.
    Thanks.

    Hi,
    You can refer to the following steps to rebuild an Offline Address Book.
    1. Open EMS. Update OAB using the Update-OfflineAddressbook "offline address book" cmdlet. Restart Background Intelligent Transfer Service on the Mailbox server.
    2. Initiate OAB replication from mail box server to CAS server. Execute for each CAS server using the Update-FileDistributionService "CASServerName" cmdlet.
    3. Start Outlook and download OAB.
    What's more, here is an article for your reference.
    How to Quickly Rebuild an Exchange 2010 Offline Address Book
    http://social.technet.microsoft.com/wiki/contents/articles/7725.how-to-quickly-rebuild-an-exchange-2010-offline-address-book.aspx
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80070005-00000000-00000000]

    Software: Microsoft Office 2007 Professional Plus
    Service: Microsoft Office 365 - Cloud Hosted
    Hello,
    I have a user who receives this error when trying to send a calendar invite to her coworkers (names have been changed for privacy):
    The following recipient(s) cannot be reached:
          Megan Bennis on 3/31/2014 3:43 PM
                This message could not be sent. Try sending the message again later, or contact your network administrator.  Error is [0x80070005-00000000-00000000].
          Charity Lurk on 3/31/2014 3:43 PM
                This message could not be sent. Try sending the message again later, or contact your network administrator.  Error is [0x80070005-00000000-00000000].
          Susan Parker on 3/31/2014 3:43 PM
                This message could not be sent. Try sending the message again later, or contact your network administrator.  Error is [0x80070005-00000000-00000000].
    All three of these users are in her address book, and are all in her office residing on the same Office 365 domain account.
    I have tried the troubleshooting methods outlined in this article, but they did not resolve the issue: http://theitbros.com/office-365-this-message-could-not-be-sent-try-sending-the-message-again-later/
    - This entailed manually downloading/updating  the address book via 'Send/Receive --> Download Address Book...'. The second method in that article had me rename/move/delete the Address Book files stored on the local machine, and then allow them to
    repopulate when you open Outlook again. This also did not resolve my issue.
    Any ideas? Thanks in advance!

    That's the kind of message you will see when trying to send on behalf of/send as another user, when you don't have the necessary permissions added. Or you are using the wrong send method, or using an outdated name cache entry, or the OAB is outdated.

  • "The movie could not be sent to QT, because a file couldn't be found"

    When I try to export a 2 1/2 min. iMovie video I made today in pretty much any format, I get the following:
    "The movie could not be sent to QuickTime, because a file couldn't be found.
    Please make sure that your project disk has write permission, and that you ahve enough disk space. This error can also be caused by some third-party iMovie HD plugins" then tells me what to do if I have said plug-ins. I have no plugins for iMovie.
    The flash drive I'm attempting to save to has almost 80mb of available space. Also, something /does/ get saved on my drive, but the (Windows) computer I try to transfer it to won't recognize it and my MacBook's QuickTime refuses to play it.
    What is going on?

    Welcome to iMovie Discussions.
    iMovie - and other Mac programs - prefer (..or need!..) to have any discs, or other devices on which you're saving movie files, to be formatted as 'Mac OS Extended'.
    That's different from the (generally) FAT32 format which Windows PCs use. And although Macs can read Windows-formatted discs - so your MacBook can read what's on your Windows-formatted flash disc - Windows machines generally cannot read Mac-formatted discs, so, er, you'd have a problem or two if you want to use any Mac-formatted device with a Windows machine!
    Your flash drive - and anything else on which you've saved your 2.5 minute iMovie video - would need to be formatted as 'Mac OS Extended' if you want to use it for iMovie editing ..but you should be able to store a 'self-contained' QuickTime movie on it perfectly well in its PC-formatted state, and that movie should play in Windows when you plug it into a Windows machine if you have the latest Windows version of QuickTime on the Windows PC.
    So maybe you exported your iMovie to QuickTime, onto the flash disc, but not as a self-contained movie. If it IS self-contained, then the complete movie would be there, and it's pretty much guaranteed to play. But if you didn't tick the 'self-contained' check-box, then all that gets saved is a very small file (called a "reference file") with a set of "pointers" to what's in the original iMovie project. In other words, you've saved only the details of how to play the movie, without actually saving the actual video file(s), which remain on your MacBook, instead of being on the flash disc.

  • Have recently updated Adobe Reader and now unable to open downloaded documents - Message received is could not open 'file name.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email a

    Have recently updated Adobe Reader and now unable to open downloaded documents - Message received is could not open 'file name.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded). When I check the file it shows Zero KB downloaded but the file appears - any suggestions?

    Obviously your download was not successful.
    What is your operating system?  How exactly do you download such files?

  • My time machine does not want to save any more the data from my powerbook 13" Snow Leopard; i get the message "Time Machine could not suppress the disk image of saving "Volumes/Time Capsule Disk/PowerBook _2011_03_21_123627 sparsebundle" What should I do?

    My time machine does not want to save any more the data from my powerbook 13" Snow Leopard; i get the message "Time Machine could not suppress the disk image of saving "Volumes/Time Capsule Disk/PowerBook _2011_03_21_123627 sparsebundle" What is the problem? What should I do?
    Thanks !!
    Alain

    Could that read " . . . could not access . . ."?  If so, try repairing your backups, per #A5 in Time Machine - Troubleshooting.
    If not, or if that doesn't help, see #A1 there. Use the TM Buddy widget it details to copy and post the messages here.

  • The data could not be saved because the server could not be contacted - Error

    Hello, I'm a beginner in ligthswitch, so, I made a couple of screens and I made the database and attach to the application but when i want to save the new records shows me this error:
    The data could not be saved because the server could not be contacted. Please check your network connection and try saving again.
    The operation has timed out.
    I verify the database, the record is saved but the application show me the error.
    Please help me I have to deliver this screens today.
    Thanks!
    Boanerges. Mr 3: 17

    Hi Elmer,
    I researched this error message, I think you can try the methods below:
    Increase the timeout of the connection between the client and the server
    Increase  Client timeout, and it is set in the Application class in the Client Project
    For further information: Error message: Unable to save data

  • LS Getting the error "The data could not be saved because the server could not be contacted" when deploying on my local desktop

    Hi:
    I have a very simple test LS App:
    1 Table "Person" with 1 property "Name"
    One totally standard Editable Grid
    So no complicated calculations that could timed out...
    When I hit F5 the screen launches and shows the data, but when I try to create a new Person it waits for about 2 minutes and then the following error appears:
    The data could not be saved because the server could not be contacted. Please check your network connection and try saving again. The Operation timed out.
    Despite the error the data gets persisted on the database.
    I am on VS 2013 Pro Update 4 and SQL Server LocalDB 2012 (v11.0).

    If you decide to try again I would:
    1) Uninstall Visual Studio
    2) Uninstall SQL Server (all versions)
    3) Re-install SQL Server
    4) Re-Install Visual Studio
    Unleash the Power - Get the LightSwitch 2013 HTML Client / SharePoint 2013 book
    http://LightSwitchHelpWebsite.com

Maybe you are looking for