Youtube and Vimeo Share Fails
Sharing to Youtube and Vimeo fails with no explanation on my i7 MacBook Pro. 3 minute sequence, sorry "project"
So FCP X can't output to tape, and can't "Share" either. Useful.
Have you repaired permissions, just in case there's an issue there?
Similar Messages
-
YouTube and Vimeo problems with Apple TV
Hello,
I own a MacBook Pro with retina display and the most recent version of Yosemite is installed, and an Apple TV which recently automatically updated.
In the last two weeks, I have encountered significant difficulties in trying to play YouTube or Vimeo videos whilst connected to my TV with AirPlay. This issue was not present earlier, and I have owned the Apple TV since September and successfully watched both YouTube and Vimeo videos on extended desktop or by mirroring desktop on many occasions before.
The problem manifests itself as a constant buffering of the video, and will never play. As soon as you disconnect the MacBook from AirPlay the video plays immediately and completely normally. Connect back to AirPlay, and the problem present itself again.
I use Chrome as a browser, but have tried it recently with Safari and I am encountering the same problem.
Can anyone help?Nevermind with this problem. I saw the other post where someone mentioned updating via wireless rather than wired ethernet. After using the wireless, the update was completed successfully and youtube started working as well.
-
Videos on youtube and vimeo are shaking in firefox but working fine in chrome
Hi ,
Videos on youtube and vimeo are flickering and shaky in firefox. But they are playing well in chrome. Also reinstalled firefox,
still didnt work. Even the adobe flash plugin is "up to date".Hello,
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
#Open Firefox ''Options'' window (''Preferences'' on Mac or Linux) as follows:
#* In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]] and select ''Options'' for Windows or ''Preferences'' on Mac or Linux.
#* In Firefox 28.0 and previous versions, click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
#In the Firefox Options (or Preferences) window, click the ''Advanced'' tab, then select ''General''.
#In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
#Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you. -
After Yosemite upgrade, youtube and vimeo videos not playing
After Yosemite upgrade, youtube and vimeo videos not playing
Hey not sure this will help, but I had the same problem, got errors, no video's worked.
I restarted hitting the OPTION key and chose the server drive to boot from, then repaired disk, then repaired permissions and restarted.
Youtube then worked afterwards. Hope it works for you! -
Best Settings For YouTube and Vimeo
When my camera's footage is uploaded to Final Cut Pro 7 the settings show as:
Frame Size: HD (1440 x 1080) (16:9)
Compressor: Apple Intermediate Codec
When I send it to compressor I keep the settings the same, but when I try to upload to Youtube or Vimeo, the upload fails.
To fix this problem I've compressed everything within the settings that Youtube specifies:
H.264
1280x720 resolution
But the quality drops dramatically. I've noticed that some other videos on YouTube still maintain very high quality though and I'm wondering if I could do something differently or compress to different settings to get better quality.
Thanks for the help.Funny Cakes wrote:
Sorry for all the questions, but where in the camera manual should I look to find info about the codec?
It shoots HDV.
Also not sure what you mean by AIC?
Shorthand for Apple Intermediate Codec.
When I first uploaded the footage I tried using final cut's "log and transfer" and also "log and capture," but couldn't get either to work.
Log & transfer will not ever work (for this camera's particular footage). Log & Transfer is aimed specifically at data-based cameras that record to memory and/or hard drives like Panasonic P2 cameras, RED, Canon DSLR's, etc. Not your camera which records to tape.
So, when you say Log and Capture didn't work, what do you mean? What happened? Nothing? Camera not recognized. Error messages?
Does this, other thread, help at all? -
Hi,
When I try to play videos on youtube, vimeo, websites, the video is blurry. How do I fix this?
Thanks!
GenevievePlease try the following:
*Disable the Firefox hardware acceleration <sup>[https://support.mozilla.org/en-US/kb/troubleshoot-extensions-themes-to-fix-problems More Details]</sup>
*Disable the Adobe Flashplayer acceleration <sup>[https://support.mozilla.org/en-US/kb/forum-response-disable-hardware-acceleration-flash More Details]</sup>
*Ensure that your computer's graphic card is capable of play videos
Can you play videos installed locally of your computer? -
Importing existing youtube or vimeo videos
Can I import an existing youtube video or vimeo video back into imovie09 for edit. thanks in advance.
I have this exact problem and just like sabbarin I've tried creating a new profile, disabled add ons, reinstalled flash, reinstalled firefox. Nothing worked. Back to explorer I suppose (where youtube and vimeo are working fine).
-
I uploaded the new Imovie 10 and cannot share videos,after about 10 mins I get the message "Share failed Video rendering error :-50", please help!
I am getting the same problem. Downloaded Maverick and the new iMovie 10.0.1 and It will only upload 10 minutes of a 65 minute video then I get the rendering error 50 each time tried to export to desktop, to thumbdrive, to youtube. No luck. any suggestions Apple?
-
Failed to upload Videos to Youtube and Facebook
Failed to upload Videos to Youtube and Facebook
Tried 2 videos. Both in portrait, bothe under 10 seconds in legth.
They have a mp4 extension. using the share button cannot upload to facebook or youtube. Tried 3 different WIFI locations and LTE.
Anyone else?I am recording the video on my Z10 and pressing the share button. I choose facebook or youtube and fill in the appropiate information. Both accounts are logged in correctly. Both fail immediatly (I get a notification in the HUB)
-
I have a finalized project in iMovie '11. Shared it on Youtube, Facebook, and Vimeo. Then, when I shared it to iDVD, it reverted to a previous version of the project, so my titles and pictures were out of sequence. Now, in my list of projects, my project is there, but finalized as the previous version which is all out of sequence. My true final project is now gone! What happend?
I didn't notice this problem until after the DVD was burned in iDVD. Then, when I played the DVD in a public setting, I was a bit embarrassed by what played.Hi
My first thoughts are
• iMovie ill behaving - Trash the iMovie pref file - use to set things right
• in reg. to Photos - Did You change iPhoto Photo Library - Then iMovie get's lost as it peeks into iPhoto on start up to see where photos are stored. Set iPhoto back to first Photo Library (when iMovie is not running) then start iMovie.
Yours Bengt W -
Hello all. We are currently running a Windows Server 2003 ADDC as a virtual machine on a Windows Server 2012 host using Hyper-V. We have recently added a second Windows Server 2012 ADDC also as a Hyper-V VM. I promoted the 2k12 to a DC, transferred all FMOS
roles, and tested AD replication. All AD data was replicated fine. However a DCDIAG (the results of which I have attached to this post) show a few errors.
First off, it is failing the advertising test. This is more than likely due to a DNS error. Unfortunately, I can not seem to find the error within the DNS to resolve it.
Secondly, it is failing the KccEvent test; also seeming as a DNS related error.
Thirdly, both SYSVOL and NETLOGON shares were not successfully replicated. This is likely the basis for the other issues. Without these successfully replicated, I can not demote the 2K3 server; which is the goal in the end, to replace the old server with
the new.
I am willing to try just about anything, so any suggestions would be greatly appreciated. As for what I have tried, I have tried a non-authoritative restore using burr flags with no success. I CAN ping both DCs from each other ensuring connectivity. All
users can currently log on to the server (due to the fact that the 2K3 server is still running and still holds the SYSVOL and NETLOGON shares).
Once again, any help would be greatly appreciated! Thank you in advance!
DCDIAG Output:
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = RETIRED2012
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site\RETIRED2012
Starting test: Connectivity
......................... RETIRED2012 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site\RETIRED2012
Starting test: Advertising
Warning: DsGetDcName returned information for
\\retired1.RetireFirst.local, when we were trying to reach
RETIRED2012.
SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE.
......................... RETIRED2012 failed test Advertising
Starting test: FrsEvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... RETIRED2012 passed test FrsEvent
Starting test: DFSREvent
......................... RETIRED2012 passed test DFSREvent
Starting test: SysVolCheck
......................... RETIRED2012 passed test SysVolCheck
Starting test: KccEvent
An error event occurred. EventID: 0xC0000827
Time Generated: 08/09/2013 22:08:34
Event String:
Active Directory Domain Services could not resolve the following DNS host name of the source domain controller to an IP address. This error prevents additions, deletions and changes in Active Directory Domain Services from replicating between one or more domain controllers in the forest. Security groups, group policy, users and computers and their passwords will be inconsistent between domain controllers until this error is resolved, potentially affecting logon authentication and access to network resources.
A warning event occurred. EventID: 0x80000677
Time Generated: 08/09/2013 22:10:02
Event String:
Active Directory Domain Services attempted to communicate with the following global catalog and the attempts were unsuccessful.
An error event occurred. EventID: 0xC0000466
Time Generated: 08/09/2013 22:10:06
Event String:
Active Directory Domain Services was unable to establish a connection with the global catalog.
......................... RETIRED2012 failed test KccEvent
Starting test: KnowsOfRoleHolders
......................... RETIRED2012 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... RETIRED2012 passed test MachineAccount
Starting test: NCSecDesc
......................... RETIRED2012 passed test NCSecDesc
Starting test: NetLogons
Unable to connect to the NETLOGON share! (\\RETIRED2012\netlogon)
[RETIRED2012] An net use or LsaPolicy operation failed with error 67,
The network name cannot be found..
......................... RETIRED2012 failed test NetLogons
Starting test: ObjectsReplicated
......................... RETIRED2012 passed test ObjectsReplicated
Starting test: Replications
......................... RETIRED2012 passed test Replications
Starting test: RidManager
......................... RETIRED2012 passed test RidManager
Starting test: Services
......................... RETIRED2012 passed test Services
Starting test: SystemLog
A warning event occurred. EventID: 0x00001695
Time Generated: 08/09/2013 22:06:48
Event String:
Dynamic registration or deletion of one or more DNS records associated with DNS domain 'RetireFirst.local.' failed. These records are used by other computers to locate this server as a domain controller (if the specified domain is an Active Directory domain) or as an LDAP server (if the specified domain is an application partition).
A warning event occurred. EventID: 0x000003F6
Time Generated: 08/09/2013 22:06:49
Event String:
Name resolution for the name _ldap._tcp.Default-First-Site._sites.dc._msdcs.RetireFirst.local. timed out after none of the configured DNS servers responded.
A warning event occurred. EventID: 0x00001696
Time Generated: 08/09/2013 22:07:44
Event String:
Dynamic registration or deregistration of one or more DNS records failed with the following error:
A warning event occurred. EventID: 0x000003F6
Time Generated: 08/09/2013 22:07:51
Event String:
Name resolution for the name retired1.RetireFirst.local timed out after none of the configured DNS servers responded.
A warning event occurred. EventID: 0x00001695
Time Generated: 08/09/2013 22:08:23
Event String:
Dynamic registration or deletion of one or more DNS records associated with DNS domain 'DomainDnsZones.RetireFirst.local.' failed. These records are used by other computers to locate this server as a domain controller (if the specified domain is an Active Directory domain) or as an LDAP server (if the specified domain is an application partition).
A warning event occurred. EventID: 0x00001695
Time Generated: 08/09/2013 22:08:35
Event String:
Dynamic registration or deletion of one or more DNS records associated with DNS domain 'ForestDnsZones.RetireFirst.local.' failed. These records are used by other computers to locate this server as a domain controller (if the specified domain is an Active Directory domain) or as an LDAP server (if the specified domain is an application partition).
An error event occurred. EventID: 0x0000041E
Time Generated: 08/09/2013 22:08:45
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x00000423
Time Generated: 08/09/2013 22:08:53
Event String:
The DHCP service failed to see a directory server for authorization.
A warning event occurred. EventID: 0x000003F6
Time Generated: 08/09/2013 22:10:04
Event String:
Name resolution for the name isatap timed out after none of the configured DNS servers responded.
A warning event occurred. EventID: 0x000003F6
Time Generated: 08/09/2013 22:10:08
Event String:
Name resolution for the name e45ad288-70ff-4d9e-adf9-3035e459e126._msdcs.RetireFirst.local timed out after none of the configured DNS servers responded.
A warning event occurred. EventID: 0x000003F6
Time Generated: 08/09/2013 22:10:21
Event String:
Name resolution for the name _ldap._tcp.Default-First-Site._sites.dc._msdcs.RetireFirst.local. timed out after none of the configured DNS servers responded.
An error event occurred. EventID: 0x00000423
Time Generated: 08/09/2013 22:11:14
Event String:
The DHCP service failed to see a directory server for authorization.
An error event occurred. EventID: 0x0000041E
Time Generated: 08/09/2013 22:13:45
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
......................... RETIRED2012 failed test SystemLog
Starting test: VerifyReferences
......................... RETIRED2012 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : RetireFirst
Starting test: CheckSDRefDom
......................... RetireFirst passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... RetireFirst passed test CrossRefValidation
Running enterprise tests on : RetireFirst.local
Starting test: LocatorCheck
......................... RetireFirst.local passed test LocatorCheck
Starting test: Intersite
......................... RetireFirst.local passed test IntersiteThank you for your response first of all! And in response:
1. "Retired1" is the 2k3 ADDC / DNS Server. It currently has a different IP than the 2K12 Server. Verified with ipconfig/all.
2. I set 2K12 to only 2K3 for DNS; no external ISP servers or itself listed. Registered DNS, restarted netlogon; no success.
3. ipconfig/all for 2K12 server here:
Windows IP Configuration
Host Name . . . . . . . . . . . . : RETIRED2012
Primary Dns Suffix . . . . . . . : RetireFirst.local
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : RetireFirst.local
Ethernet adapter Ethernet:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Hyper-V Network Adapter
Physical Address. . . . . . . . . : 00-15-5D-01-33-0A
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::8159:4f0c:4071:d780%12(Preferred)
IPv4 Address. . . . . . . . . . . : 172.21.69.246(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.192
Default Gateway . . . . . . . . . : 172.21.69.250
DHCPv6 IAID . . . . . . . . . . . : 251663709
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-74-BE-C0-00-15-5D-01-33-0A
DNS Servers . . . . . . . . . . . : 172.21.69.240
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{8317BEC2-079A-4846-B6B2-1AE3E2784691}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
4. The 2K12 is a GC; yes.
Thanks again and hopefully we can work this out!
Seems like you have/had a server named "retired1" with the same IP address as the new 2012 server? (if this is a old server) remove all references to it in DNS
Make sure that on the 2012 server in the TCP/IP DNS Settings, you only point to the 2003 DC for DNS (Not it self for now, and no external ISP DNS servers) - Run ipconfig /registerdns and restart the netlogon service on the 2012 server.
Can you post and unedited output of ipconfig /all from the 2012 server?
Did you make the 2012 server a global catalog? (if not I would recommend that)http://support.microsoft.com/kb/296882
Seems like you have/had a server named "retired1" with the same IP address as the new 2012 server? (if this is a old server) remove all references to it in DNS
Make sure that on the 2012 server in the TCP/IP DNS Settings, you only point to the 2003 DC for DNS (Not it self for now, and no external ISP DNS servers) - Run ipconfig /registerdns and restart the netlogon service on the 2012 server.
Can you post and unedited output of ipconfig /all from the 2012 server?
Did you make the 2012 server a global catalog? (if not I would recommend that)http://support.microsoft.com/kb/296882
Seems like you have/had a server named "retired1" with the same IP address as the new 2012 server? (if this is a old server) remove all references to it in DNS
Make sure that on the 2012 server in the TCP/IP DNS Settings, you only point to the 2003 DC for DNS (Not it self for now, and no external ISP DNS servers) - Run ipconfig /registerdns and restart the netlogon service on the 2012 server.
Can you post and unedited output of ipconfig /all from the 2012 server?
Did you make the 2012 server a global catalog? (if not I would recommend that)http://support.microsoft.com/kb/296882 -
I put video clips together and added music off of iTunes
but it will not attach when I put it on youtube or vimeo.
what is wrong. It plays as I made it on iMovieThank you all for your replies. Here is what i ended up doing. I cannot afford any 3rd party software so i went to itunes and manually entered all my playlists. As I had indicated my purchased music was on my new computer just not the playlists and I could not sync my ipod. After I rebuilt all my playlists I tried to restore my ipod to factory defaults/new. All of the steps called for in apple support and elsewhere were not available to me. I connected my ipod, went to my computer, right clicked my ipod, and formatted. That wiped my ipod so when I connected to itunes it then gave me a restore option. I did the restore and all is good in the empire again. I can now buy new music and sync my ipod so I am a happy camper.
Thanks to all. -
Unable to share to youtube and audio goes out of sync
hey,
Im trying to upload a video to youtube.
So, i clicked * Share - Youtube *
And after about 30 minutes it notified me that the upload was complete… Well i went on youtube and checked & my video wasn't upload… i tried again, and still nothing happened…
So i decided to export the movie to a file, and manually upload it .. when i watch the video on my computer.. it's plays perfectly.. but for some reason.. when i upload it to youtube the audio goes off ,
Random audio that i deleted plays… and audio from one clip plays over another..
PLEASE HELP
How do i fix this ? i just want to upload a normal video to youtube…
Thanks
~Chris
Message was edited by: Youtuber
Message was edited by: YoutuberI have the feeling there isn't a real solution for many of us who are having this problem.
I just gave up and exported to the desktop, and then used YouTube's uploader, which works fine.
Sorry, I don't have a fix, but wanted to add my voice as someone who has tried a lot of ways with his iMac, and figured it wasn't worth all the hassle. YouTube's uploader lets me upload many clips at once, add commentary, and then go do something else, sure that it will go ok. I had the iMovie-YouTube link working for a bit, but then it went all haywire again.
Hugh -
I created a 23 minute slideshow with music of family vacation. Youtube and smugmug both said it was too large to post for my family.
suggetions please?? I use to use Mobileme...A few different ways about this. You could split the slide show into smaller sections that are withi the limits for posting and then post each section.
You could try a different encoding to make the file smaller. What settings did you use when you created and exported the slide show? -
How do I embed YouTube or Vimeo video in an apple mail message
Is there an easy way to embed YouTube or Vimeo video in an apple mail message?
I've tried using command+i (same with share feature) on a YouTube page ... looks great except I get missing plugin error on video.
I'm up to date on Flash plugin, running Safari 6, OS X 10.8. No old Flash files in the internet library.
Any help is appreciated!There's an HTML validator built in to the editor and it will, by default, throw out all but the simplest HTML tags.
The Apple document, Mac OS X Server, Wiki Server Administration V 10.6 explains all the gruesome details. But here's the solution that I use:
Change to the Wiki Server's directory by using
cd /Library/Application\ Support/Apple/WikiServer
If it doesn't exist, create a file called whitelist.plist:
sudo touch whitelist.plist
The file will be owned by root and all members of the _teamserver group. The latter is required for the Wiki service to have access.
Then edit the file with any appropriate editor -- I like vi:
sudo vi whitelist.plist
The file needs to have very specific formatting. This one should get your YouTube embedded HTML working:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>protocols</key>
<array>
<string>scp</string>
</array>
<key>styles</key>
<array>
<string>font-size</string>
</array>
<key>tags</key>
<dict>
<key>object</key>
<array>
<string>width</string>
<string>height</string>
</array>
<key>param</key>
<array>
<string>name</string>
<string>value</string>
</array>
<key>embed</key>
<array>
<string>src</string>
<string>type</string>
<string>width</string>
<string>height</string>
</array>
<key>script</key>
<array>
<string></string>
</array>
<key>hr</key>
<array>
<string></string>
</array>
</dict>
</dict>
</plist>
After making changes or additions, save and close the whitelist.plist file then restart the Web service using the Server Admin application.
If you aren't at all familiar with vi, then you may want to instead create a text file on your desktop, put the content into it, then move it to the right location and change its ownership and permissions.
Hope this helps.
Maybe you are looking for
-
More than one blog template?
I have two blogs on the site I'm developing, and I'd like to use different templates on each of them. (One is for News, and the other for Tips 'n Tricks.) It seems that all blogs have one template. Is that true? Is it possible to use blog-specific ta
-
I can'treproduce musics through the aipor express with my ipod touch
-
Problem in calling jsp/servlets ...Last Day
when ever I call jsp page from browser, It always search the jsp page in the parent directory of the documentroot directory. Also I am not able to set the configuration for calling the servlet from my customize laocation. is any other entry needed ex
-
[package upgrade] Can't update udisks due to filesystem conflicts
Hello everybody, after not updating my box for like two weeks I wanted to update it this morning. Unfortunately the upgrade process hangs due to several file conflicts within the udisks package. $ sudo pacman -Syu :: Synchronizing package databases..
-
Possible to show null data in bar chart?
I am creating a report that has a chart that charts when a part was rejected and who it was rejected by (customer or internal). The problem is, that when I create the chart it does not show dates when there is no rejection. I would like the chart t