YouTube App stopped working on E5-00! Showing conn...

I have problem only with this app, every other app that uses internet works just fine. YouTube App reports the same following error on both, 3G and Wi-Fi. I tried to reinstall the app, but it didn't help. Any suggestions?
Solved!
Go to Solution.
Attachments:
Scr000003.jpg ‏17 KB

Hello there!
I have the same problem (almost) and have been looking for a solution for the past 5 or 6 hours. Can't tell you guys how much I was relieved when I saw  "Solved! Go to solution" but unfortunately it didn't work for me.
The thing is, I did a factory reset on my Nokia E63 because of a problem I had with Adobe Reader, and when the phoned turned on after the reset, I found out that Youtube was already installed, but there wasn't any shortcut to launch the app in the Media or Installations menu. So I opened the app manager and deleted it, and then re-installed it ( I installed a 2.04(10) version I found online). And now I have the same error as in OP's picture.
I donwloaded the 2000FBBA folder and tried to copy the files in the C:\Private folder using an app called X-plore (because Youtube was installed in C and there wasn't a 2000FBBA folder in E:\Private). Apparently you can't do that, even with x-plore, so I uninstalled the youtube app, and re-installed it on the SD memory card this time. The youtube app was still not working (same "could not connect" error) so I opened the card on my pc and there was a 2000FBBA folder, but it only had 2 files and a full "res" folder.
I copied the files from your RAR to E:\Private\2000FBBA, put the card back in the phone, turned it on, but youtube was still not working. I should also mention that I did the factory reset like 5 hours ago, but youtube was working fine yesterday, and I forgot to write down the number of the version I was using.
2.04(10) is the only version I have been able to find online. There's this this one but I can't find a way to download it.
This is getting very frustrating for me, and it doesn't help that when I use the web browser and real player to view youtube videos the quality is really bad and there's a lot of "stuttering" and small "breaks" in the sound.
Please I'm open to any suggestions. Even if I have to do another factory reset I'll do it, I just want to watch some videos on my phone

Similar Messages

  • 42SL417U Youtube app stopped working

    Greetings, A few days ago, the Youtube app stopped working. The logo comes up, but the progress bar that normally shows loading progress never starts. I have tried unplugging the TV for several hours, but that's about it. Are there any other steps I should take? Netflix appears to work fine. Thanks.

    Same exact thing happened to my TV (same model as yours) at the same time it happened to you. And YouTube still does not work. I was hoping it was an issue with YouTube that they would fix, but it's been three weeks and nothing has changed, nor can I find any answer as to why this happened. It's a real bummer, because I used the YouTube app on the TV all the time.

  • Why have iplayer, music and YouTube apps stopped working on iPad 1?

    These have all stopped working on my iPad this week, any ideas on why and what to do?

    I also have an iPad1 and my YouTube app keeps giving me an "authentication failed" error.  It was working fine up until this morning.  I have tried everything I can find online to regain access including: verifying that I am using the correct user name and password, activating 2-step verification and several attempts at application-specific passwords...no luck so far.  I am going to try to resist the urge to keep trying for a while, hoping that maybe allowing it time to reset will help???
    I do not usually use the Music app, but  it seems to work okay for me.  I only have a single podcast on there, but it played okay when I tried it.  And I do not have iPlayer, so no idea about that one.
    Of course Apple online support is no help because my device is "too old" and I can't afford to spend $20 for them to talk to me.  Any ideas or tips would be greatly appreciated.  Thanks!!!

  • Apple tv - Youtube App stopped working

    About 4 months ago, the youtube app on my Apple TV stopped working.
    Nothing worked to fix this.  But When the new update was released for the Apple TV, everything began working.
    But the problem had resurfaced.  The Youtube App on my Apple TV is no longer allowing me to log in.  It keeps saying that my password is not correct.
    Just FYI, to avoid anyone giving me irrelivant information...
    1) I do not and never have had the higher level security requiring my cell phone as a secondary authentication.
    2) I AM able to log in on my computer with no problem but the Apple TV will not allow me to log in.

    BTW, I should clarify, I am specifically having a problem mirroring.  Home sharing is on and all my library is there, just no mirroring.

  • Youtube App Stopped Working

    Hello. The other day, Google changed youtube so that the user's accounts would be linked with Google + user accounts.
    Coincidentally, the youtube app on my iPhone 4 with iOS 5.1.1 is not letting me log in anymore. Furthermore, I am unable to search for videos.
    Is this Apple's way of forcing users to upgrade to iOS 6? My phone doesn't have enough space (~50 mb left) or processing power to handle iOS 6, so I'd rather not upgrade. I suspect that youtube will only work if I update it to the iOS6 only version though.
    Is anyone else experiencing similar difficulties?

    It's just that I have a lot of good applications that I have no reason to delete, and many photos that I wish to keep on my phone. If I can find out how much more space is needed for iOS 6, then I can delete files to compensate.
    Again, it's an iPhone 4 (a "free" one) that came with way too little space. *GB, but about 6GB with the required software installed.
    Does anyone know how well iOS runs on an iPhone 4, and how large the iOS 6 update is?
    EDIT: General Settings tells me that I require 2.8GB of available space. That's impossible for me to do. 150mb maybe...

  • Mail app stopped working after upgrade to Mavericks

    Dear All,
    I have updated from Mountain Lion (Macbook Pro 3,1, 256SSD) to Mavericks, and mail app stopped working.
    That means - when I click the icon - the app does not work.
    I can see that it downloads mail - as when I click it I receive notifcation that it has downloaded some mail, however I cannot open window. Sometimes I manage to open it, but it is totally unresponsive - I cannot change or click anything in it.
    I have tried repairing disk permissions but without any success.
    Moreover if I run mail app and try to click "new message" from the top bar, the window that appears is somewhat mixed with my wallpaper backround (I can see fragments of it).
    Please help me, as I had there a few gigs of precious mails that I don't want to lose...
    Thank you in advance!
    Olek

    Do a backup.
    Take notes of all account information or take screen shots. You may need to set the accounts up again. Quit Mail.
    Copy the line below.
    ~/Library/Containers/com.apple.mail
    Select Go/Go To Folder from the Finder menu bar. Paste the line into the window. You won’t see it.
    Move the folder com.apple.mail to your desktop. You must move the entire folder, not just the contents.
    Relaunch Mail and test. If the problem is solved, recreate any required Mail settings and import any emails you want to save from the folder on the desktop. If the problem remains, return the folder to where you got it replacing the one that is there. 
    Information learned from Linc Davis.
    If you prefer to make your user library permanently visible, use the Terminal command found below.
    Show User Library Directory in Mac OS X 10.7 Lion & 10.8 Mountain Lion
    You might want to bookmark the command. I had to use it again after every update. I have also been informed that if you drag the user library to Finder it will remain visible.

  • Hello  My system version 10.5.8  I have installed Safari update - 5.0.6 and the browser stopped working. At openingit shows the following icon:   "Safari has suddenly finished working. Possible problem is in the action of the plugin "TastyAppsAVPlugin".

    Hello
    My system version 10.5.8
    I have installed Safari update - 5.0.6 and the browser stopped working. At openingit shows the following icon:
    "Safari has suddenly finished working. Possible problem is in the action of the plugin "TastyAppsAVPlugin".
    After deleting all plugins from the folder "Internet Plugin", Safari worked again no problem, BUT all sites with flash content (e.g.YouTube) did not work.
    I then tried the following experimental steps:
    a) Moved all plugins from the folder "Internet Plugin" into a temporary folder.
    b) Downloaded and istalled Adobe Flash Player version 10.3.181.34
    c) Started Safari and it did not work ( same message"TastyAppsAVPlugin")
    d) Deleted Adobe Flash Player from the folder "Internet Plugin". Safari worked.
    e) Moved back all plugins, except Adobe Flash Player, from the temporary folder to "Internet Plugin" folder. Safari works... But Flash won't work!!! Before update to Safari 5.0.6 , ev erything worked perfectly well.
    Guys, please solve the problem
    Regards
    Ruslan Reed
    [email protected]

    MayaMa --
    There are many threads on this.  I typed "Uninstalling TastyApps" in the Google search, and came up with these:
    http://www.google.com/search?client=safari&rls=en&q=Uninstalling+tastyapps&ie=UT F-8&oe=UTF-8
    I do not know which of the many TastyApps haxies you have.  Perhaps it would be better to contact them directly, once you know which of their products you have.

  • Reminders app stopped working

    iPhone 5 (GSM) on iOS 8.3.
    I noticed that my Reminders app wasn't syncing with iCloud via wifi or LTE, so I turned off/on the setting in iCloud. The app stopped working at all after that. When I open the app, nothing shows up at all, not even a default list. When I try to use Siri to remind me, Siri will say that the reminder cannot be made.
    I tried restoring iOS then restoring the backup, same thing still happened.

    Hello gotlactose,
    I'm sorry to hear you are having these issues with your iPhone. If you continue to have issues with Reminders either launching or syncing, you may find the troubleshooting steps outlined in the following article helpful:
    Get help using Reminders in iCloud - Apple Support
    Sincerely,
    - Brenden

  • YouTube just stopped working.

    YouTube just stopped working.  Has blank screen and can't access anything. Everything else is working fine. Any suggestions?

    (A) Try reset iPad
    Hold the Sleep/Wake and Home button down together until you see the Apple Logo.
    Note: Data will not be affected.
    (B) Close all apps in the multi-task window
    1.Double-click the Home button.
    2. Swipe the app's preview up to close it.
    3. Preview will fly off the screen.

  • Why do some apps stop working after update to iOS 6?

    I notice one of my apps stopped working after the iOS 6 update, in particular Uno HD, which I paid $5 for.  Why did this happen?

    I had solved the problem by installing the free app, which seemed to reset something, then I deleted the free app, and the paid version continued to work until the next day.  I was going to show one of my friends the game, and then it once again would not open- the same problem was back, as soon as I went to open it, it crashed back to the desktop without opening the game.  I had to re-install the free version again, and for a while, neither version would work, but then after a while, it started working again.  I guess I have to leave the free app installed or I won't be able to use the paid version of Uno.
    EDIT
    Just checked again, took the Uno app out of resident memory by double-pushing the home button and holding the app icon til it starts to shake, and then hit the minus symbol, which deletes it out of resident memory.
    Went to open it again, and it of course crashed back to the desktop again.  So there is some issue with it that is making it unstable.
    I have to keep pushing on either one of  the app icons continuously until one of them starts, and then the other one will start.
    Gameloft needs to do an update.
    Message was edited by: Sonic Bodhi

  • HT201401 camera app stop working

    camera app stop working and when i open the camera again it show's closed lens or black image
    and when i force close the app and open it again nothing happen i had to restart my phone to get it work again

    i restarted my iphone and the problem resolved and after that i just update my phone to ios 7.1.2 and if the problem happened again i will make another post
    thanks to you

  • Several apps stopped working -- won't run

    Macbook 2GHz 2GB
    OSX 10.4.10
    Hi all,
    Today I've had several apps stop working -- meaning, when I run them, their icon will bounce a couple times and then disappear, and the program never runs.
    Googling led me to try deleting pref files -- one program had a pref file, I deleted it but no difference. The other apps didn't have any pref files.
    I've repaired disk permissions. I've uninstalled/reinstalled each program.
    I've been using them with no problems until today. The Macbook did try a software update today, but kernel panicked in the middle of installing -- not sure if that could cause it. I've tried Software Update again but it finds nothing.
    Any help will be VERY much appreciated. I've never had this happen before, and can't seem to find much about it.
    Thank you!

    Here's the page from MacFixIt:
    Click here to find out more!
    What's Related
    # Links: series of articles
    # Preferential Treatment
    # "Re-installing Apple applications from a Mac OS X disc/update package using Pacifist."
    # #301658
    # software downloads page
    # "Common workaround -- create a new user account"
    # Archive and Install proces...
    # revert
    # subscribing to MacFixIt Pr...
    # TopicTutorials
    Categories:
    # Misc
    Story Options
    # Mail Story to a Friend
    Click here to find out more!
    Tutorials Tutorials
    Tuesday, March 14 2006 @ 08:00 AM PST
    Tutorial: What to do when a Mac OS X application will not launch
    It’s a frustrating scenario: You click on a regularly used application only to find that it will not launch – either bouncing indefinitely in the Mac OS X Dock or simply providing no feedback whatsoever. There are a number of potential solutions for this problem, ranging from simple and relatively quick to more tedious.
    Update prebinding Many cases of application launch-failure can be resolved easily by simply updating prebinding, via the following steps:
    1. Log in as an administrator
    2. Open the Terminal (located in Applications/Utilities)
    3. Type: sudo update_prebinding -root / -force and press Return.
    4. When prompted for a password, enter your admin password, and press Return again. The process may take a few minutes, and you may see various messages flash by. The process is complete when the Terminal returns to a normal prompt.
    5. Type exit and press Return.
    6. Check for the capability to launch the problematic application.
    Kill process in activity monitor Killing an application-related process via Activity Monitor (click the item then press the 'Quit Process' button) can allow proper application launch. This is especially applicable in situations where a restart cures problems with application launching, as the offending process(es) will, of course, be killed by the restart process.
    Launch Activity Monitor (located in Applications/Utilities), then find the process associated with the problematic application, then quit it and attempt re-launching the applications.
    Delete appropriate .plist files A non-launching application can be the result of a corrupt or otherwise defunct associated .plist file (for more information on exactly what a .plist file is, see this series of articles)
    Most of the preferences files that we will be talking about are stored in a folder named Preferences, and located in the Library folder of your home directory, e.g.:
    * ~/Library/Preferences/com.apple.Safari.plist.
    Go to the ~/Library/Preferences folder, and search for any .plist files that may be associated with the application you are having trouble with. Drag the .plist file(s) [many applications have more than one associated .plist file, so be careful to scour for all of them] to the Desktop, then re-attempt launching the application.
    You can also use an application like Preferential Treatment to check for corrupt .plist files.
    Re-install the application Try re-installing your application from its original media or download source.
    If an Apple application or component is not launching properly, you might need to restore it from the Apple installation discs per the instructions in our tutorial "Re-installing Apple applications from a Mac OS X disc/update package using Pacifist."
    Clearing caches Try using a utility like Tiger Cache Cleaner, OnyX, or Cocktail to perform series of system cache deletion routines. Go from light, to medium to deep (the ordinal levels are defined differently in each application), checking to see if your afflicted application launches properly after each.
    Also, check the following folder for application-specific cache files that can be deleted, or at least temporarily removed:
    /Library/Application Support (look inside the folders here for files that end with .cache, and delete them)
    Make sure permissions are correct A range of permissions issues can effect Mac OS X applications, causing them not to launch.
    In these cases, the first thing to try is a disk permissions repair routine using Apple's Disk Utility (located in Applications/Utilities).
    Failing that, startup from your Mac OS X installation disc (insert it, then restart while holding down the "C" key). After the startup process is complete, go to the "Utilities" menu and select Disk Utility. Click on the First Aid tab, then click on the Repair Disk button.
    In some odd cases (usually after a backup or when transferring backed up data back to a startup device), permissions on the "MacOS" directory (the directory that normally stores the executable binary in a Mac OS X application) can become incorrect.
    In order to fix this problem, use the following steps:
    1. Click on the afflicted application to select it in the Finder
    2. Either click the application while holding the control key, or use the "Action" menu (the icon looks like a gear) to access the option "Show Package Contents"
    3. Open the "Contents" folder therein, and then find the "MacOS" folder
    4. Modify the permissions on this folder to give it "execute" permissions for all users. Do this by opening the Terminal (located in Applications/Utilities) and typing the following command (don't press return afterward):
    5. sudo chmod 755
    6. After typing this, drag the "MacOS" folder to the Terminal window -- its path should appear. Press return, and you will be prompted for your administrator password, which you should enter.
    The "MacOS" directory should now have read, write and execute priveleges for the owner, and read and execute privileges for the group and others.
    Check CoreAudio As noted in Knowledge Base article #301658, some Apple applications might not open fully or at all if the Digidesign Core Audio driver has been installed as part of a Pro Tools version 6.9 installation.
    Apple says to follow these steps if you are affected by this issue:
    * Updating your Digidesign Core Audio driver may resolve the issue. You can find the latest versions for Mac OS X 10.3 (Panther) and Mac OS X 10.4 (Tiger) at http://digidesign.com/download/coreaudio. If that doesn't help, continue to step 2.
    * Open Audio MIDI Setup (/Applications/Utilities).
    * Click the Audio Devices tab.
    * From the Default Output pop-up menu, choose Built-in Audio.
    Check for errant plug-ins Some application launch failures can be caused by problematic plug-ins or other add-ons. Safari and other Web browsers are notorious for suffering from this issue, as are some other extensible applications like iMovie.
    Check the following locations for any recently added files, or any files implicated in error messages generated when you attempt to launch the problematic application:
    * /Library/Internet Plug-ins
    * ~/Library/InputManagers
    Re-apply the Mac OS X combo updater Try re-applying the latest Mac OS X combo updater from Apple's software downloads page. Doing so can resolve issues with system components or delete specific files that can resolve application launching issues.
    Create a new user account Try creating a new user account, and check if the application launches under it. If so, a user-specific corruption issue is likely at play -- see the above sections regarding .plist files and caches. See our tutorial "Common workaround -- create a new user account" for more information.
    Archive and Install As a last resort, try performing an Archive and Install process, which will retain some user settings but otherwise leave you with a fresh Mac OS X installation.
    Also, check with the application's developer for compatibility notes regarding the version of Mac OS X you are running, and revert to an earlier iteration if necessary.
    Miriam

  • Fixed spooler subsystem app stopped working

    Hi All,
    I had "spooler subsystem app stopped working..." and found solution that may help you to fix your case.
    I don't know some how vista turn off LDP port after installing new printer driver and leaves only Internet client port only. That why the printer spooler service failed to start. Solution is:
    1. Go to Programs and Features in Control panel > click Turn Windows features on or off
    2. click + sign of Print services
    3. Select LPD and LPR. You should remove Internet Printing Client. > restart your PC to ensure there is no error of spooler service.
    4. Add your printer driver again.
    It worked for me. Let try.
    Chan

    Usually the driver crashes and preempts the print spooler. the famous HP LJ 1020 made an expert on printing, because the driver is faulty. read on... IF you have the HP LaserJet 1020 then the fix is found all the way down on this reply.
    you have two options:
    OPTION1
    www.TheComputerManual.com and buy the ebook there it will help you solve your problem and others. go to the end of this to find another link for the print spooler fix .
    Chapter 1    7
    First things first, Don't forget to LOL    7
    Before OOB (Out of the Box)    8
    Out of the Box Experience    9
    Single Click or double Click?    10
    The Start button, Start Menu and Taskbar    11
    MY Computer or Computer    14
    The RUN Dialog Window    18
    Copy and Paste (Ctrl C, Ctrl V)    20
    The Undo and Redo Commands    23
    Selecting and copying multiple items    24
    Drag and Drop    25
    Create a new folder    27
    Browsing for files and folders, file proprieties    28
    Address Paths    34
    Screen captures – Screen shots    35
    Working with archive files    36
    Antivirus Antispyware vs. Ad-Aware or Bugs    39
    User Profile cleaning and maintenance    42
    Disk Cleanup – To clean your user profile    45
    Users and Profile Backup    48
    Wild Cards    50
    Chapter 2 Recovering your computer    51
    Burn your recovery DVDs    52
    Creating a System Image    56
    Recovering your computer from the System Image    63
    Recovering your computer from the recovery partition    72
    Recovering your computer from the Recovery DVDs    74
    Lenovo recovery from DVDs - Example    86
    Installing the Windows® OS    93
    Windows® partitions and Disk Management    95
    Installing Windows® OS from the CD/DVD    97
    Windows® XP Professional    98
    Installing Windows® 7    114
    Installing new drivers    124
    Problems with Automatic Driver Installation    130
    Chapter 3    132
    Expanding your Computer’s abilities    132
    Downloading and Installing Applications    133
    Installing RealPlayer®    141
    Installing ITunes®    144
    Burning CDs DVDs    146
    Necessary Software    150
    Downloading and installing OpenOffice®    152
    The Insert key Problem    156
    Chapter 4    157
    Windows® OS and Control Panel    157
    Inside the Box or inside the Tower    158
    S-ATA Hard-drive Connection    159
    Familiarize yourself with the Operating System    161
    Control Panel    162
    Programs and features    163
    Backing UP your data    165
    Default Programs and File Extensions    168
    Folder Options    171
    Network and Sharing Center    175
    Internet Options    177
    Windows® Update and Windows® Firewall    178
    Devices and Printers    179
    Add a network printer    180
    Installing a shared printer    188
    Sharing a printer    189
    Troubleshooting the printer    191
    Device Manager    197
    The Notification Area    198
    Microsoft SyncToy    201
    WinMerge    206
    Chapter 5    209
    Troubleshooting    209
    Troubleshooting your Windows Start-Up    210
    Hard Disk tools    212
    System Restore    216
    Troubleshooting your PC – Msconfig    218
    Troubleshooting your computer - The SysInternals® Tools    222
    ERD Commander    230
    Troubleshooting your printer and print spooler    231
    Chapter 6 Networking    234
    Network IP addresses    235
    Setting up your network    236
    Network Overviews    237
    Tweaking your Verizon DSL network    239
    Troubleshooting your wired network connectivity    243
    Connecting to your wireless network    248
    Troubleshooting your wireless network    252
    Transferring or migrating data to the new computer    256
    Remote Desktop    272
    Remote Desktop Options    278
    Windows® Firewall in Windows® 7    282
    Chapter 7    286
    More Fun Stuff    286
    Manage an IPOD® with ITunes®    287
    Downloading YouTube® files for iPods.    297
    HandBrake    299
    Manipulating CDs DVDs and ISOs    300
    Video LAN Player VLC player    305
    Virtual Machines    306
    or
    OPTION 2
    www.gameaddict.eu where you'll find a tutorial for the print spooler and search for "print spooler" to find the thread, or HP 1020.

  • Sent so large of a message that my messages app stopped working.

    I found the fix for this. This error is caused by sending so many text in a message that your messaging app stops working.
    I'm on IOS 6.0.2 iPhone 5 Verizon. The fix is go to phone app and then click on a contact then click send a message then click cancel and return to threads and then delete thread that messed up messaging app.

    This needs fixed by apple because it can be used as a spam tool. The person I sent the text to they also could not use their messaging app until I showed them the fix. They have an iPhone 4. So if you send this as a group message you could spam a ton of people's phones. This is a dangerous bug.

  • My youtube videos stopped working this week.  Nothing else has changed.  I am using the lastest software on my iphone 5s

    My Youtube videos stopped working on my iphone 5s.  I have the latest updates on the phone and deleted and reinstalled the Youtube app.  Didn't work.

    I had major issues using VPN passthrough with PPTP on the RV180W through a PPPoE internet connection. In the end I gave up - I think there are some PPTP servers that the RV180 just has trouble with.  I had no problems with 3 other routers straight out the box. Unfortunately I lost access to the VPN server before Cisco could fix.
    See thread:
    https://supportforums.cisco.com/thread/2174283?tstart=0
    Its interesting that it used to work and now doesn't - maybe Verizon or the VPN server have had configuration changes?  Or maybe your antivirus has created a different profile for the different router - would be worth temporarily disabling any firewal/antivirus?
    It would be good to try a different non-Verizon router if you can get your hands on one to see if Verizon network changes now require special features/settings on the router.

Maybe you are looking for