Youtube is very slow in my iphone 5s, help please

Youtube se queda pegado cada 5 segundos en mi iphone.
Avanza un poco y se detiene, vuelve a avanzar y se detiene.
Qué hago??

That makes very little sense. Can you be a little more descriptive?

Similar Messages

EP - Very slow login... Help please

Hello.
We are having issues with our portals in the sense that it is taking users up to two minutes to login to our portal system. The long login times seem to only happen on our "dialog servers", and the central instance logs in fine and fast. We are suspecting a parameter maybe, or some tuning issue with the app server, however, cannot find anything to date. Furthermore, after the users login to the system (either DI or CI), the system runs fast, and performs well,,, it is just the login that is taking a considerable amount of time.
Has anyone experienced this before? Any advice or suggestions would be greatly appreciated.
Thank you
Richard

Hi guys:
After further investiagion on our part, here are a few other variables I have come accross:
1. The only the portal dialog instances (app servs) are slow.. the central instance is fast when loggin in.
2. This seems to only affect users logging in from the active directory. Users such as "administrator" login fast.
Either way, hope this extra bit of info helps.
Thanks for any advice guys
Richard

Very slow connection?... help please.

hi, this is my first post on the forum and i'm basically after some advice as to whether i'm likely to improve my broadband speed?
I live in Suffolk, some distance away from the local exchange, although i know that other people in my village have a faster broadband service than i am currently getting.
I have tried various things over the last few months including phoning BT and having them do various tests and resets on my line assuring me of an improved service but to no avail?
I've also followed advice on this very forum and put in a shielded wall socket booster, a high speed dsl cable and exchanged my hub for the business hub.......
for the record, i only have one phone socket in my bungalow, so extension wiring isn't a problem.
i'll post the results of my hub status and speedtest results below and if someone could shed some light on these figure, i would be hugely appreciated.
thanks in advance
Simon
SPEEDTEST RESULTS:
Download speedachieved during the test was - 315 Kbps
For your connection, the acceptable range of speeds is 50-500 Kbps.
Additional Information:
Your DSL Connection Rate :1184 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 350 Kbps
SUMMARY STATUS:
Summary Status
DSL Link:   Connected
Internet:   Connected
Internet Details
Broadband Link Type: Built in modem - ADSL
Connection Type: PPPoA
User Name: [email protected]
Current Internet Connection:
IP Address: 86.132.32.113
Subnet Mask: 255.255.255.255
Default Gateway: 217.47.66.141
Primary DNS: 217.32.171.21
Secondary DNS: 62.6.40.166
Host Name:
Domain:
MAC Address: --:--:--:--:--:--
MTU: 1500
DSL Details
Modem Type: Built in modem - ADSL
DSL Line (Wire Pair): Line 1 (inner pair)
Current DSL Connection:
                                 Down           Up
Rate:                      1184 kbs      448 kbs
Max Rate:                1184 kbs      824 kbs
Noise Margin:           9.0 dB         17.0 dB
Attenuation:             61.1 dB       31.5 dB
Output Power:          16.4 dBm 11.9 dBm
Protocol: G.DMT Annex A
Channel: Interleaved
DSLAM Vendor Information Country: {3840} Vendor: {ALCB} Specific: {0 }
ATM PVC: 0/38
Rate Cap: 1184 kbs
Attenuation @ 300kHz: 61.1 dB
Uncanceled Echo: -7.1 dB Ok
VCXO Frequency Offset: 27.1 ppm Ok
Final Receive Gain: 34.5 dB Ok
Impulse Noise Comp. Tones: 0 Ok
Excessive Impulse Noise: 0 Ok
Traffic Statistics
IP Traffic Bytes Packets Errors %
Transmit: 34516782 322969 0 0
Receive: 434170014 377821 0 0
ATM Traffic Cells Errors %
Transmit: 972725 0 0
Receive: 9331356 0 0
DSL Link Errors
Collected for 16:16:33
Since Current Current Time Since
Reset 24-hr int. 15-min int. Last Event
ATM
Last Event
Cell Header Errors 472 472 1 0:00:01
Loss of cell Delineation 132 132 0 0:16:53
DSL
Link Retrains: 1 1 0 4:55:22
DSL Training Errors: 0 0 0 0:00:00
Training Timeouts: 0 0 0 0:00:00
Loss of Framing Failures: 0 0 0 0:00:00
Loss of Signal Failures: 0 0 0 0:00:00
Loss of Power Failures: 0 0 0 0:00:00
Loss of Margin Failures: 0 0 0 0:00:00
**bleep**. Seconds w/Errors: 226 226 1 0:00:01
**bleep**. Sec. w/Severe Errors: 6 6 0 2:03:45
Corrected Blocks: 35786 35786 332 0:00:01
Uncorrectable Blocks: 581 581 1 0:00:01
DSL Unavailable Seconds: 65 65 0 4:54:57

you say you fitted a 'shielded wall socket' do you mean a filtered faceplate like this
you can also check this post for ideas which may help
http://community.bt.com/t5/BB-in-Home/Poor-Broadband-speed/m-p/14217#M8397
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Netflix /youtube is very slow and jerky

My macbook pro is a 2.43 GHz intel Core duo with 4GB of memory. I updated to Maverics and Netfix and youtube became very slow and jerky.
Even moving the mouse causes probles with playback.
This does not happen my wifes mac book pro, or my small windows laptop and it did not happen untill I updated to maverics.
Any suggestions?
Thanks

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

My 3g is very slow in my iphone 5s sometimes and some times it is speed?

my 3g is very slow in my iphone 5s sometimes and some times it is good speed ?

That makes very little sense. Can you be a little more descriptive?

I'am update Ios 8 on my 5s but wifi very very very slow..... Please fix this problems

I'am update Ios 8 on my 5s but wifi very very very slow..... Please fix this problems

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If those solutions don't work your iPhone 4s has probably developed a hardware problem. The permanent solution is to get it replaced.
You can search the internet for heating and freezing solutions that might work (at least for a while).
For example, see here: https://www.youtube.com/watch?v=nj10bz5bI6A
Root cause: On some iPhone 4s devices there may be a flow soldering problem with the WiFi chip. After long periods of WiFi activity such as installing an iOS update (for example, iOS 7 or iOS 8) there may be a connection failure. A work-around to this is the procedure in the youTube video.
A true hardware fix may be found here:
https://www.ifixit.com/Guide/How+to+Fix+iPhone+4S+Wi-Fi+Grayed+Out/22167

E book bought from Waterstones is very slow in use can you, help?

E book bought from Waterstones is unreasonably slow in use can you help, please?
I purchased a copy of “The Complete English Poems” by John Donne as an e-book, I downloaded the e-book successfully, as well as the new Digital Editions software and transferred the e-book to my Sony Reader. However when I try to use the book it is slow opening up and very slow moving between sections, or navigating between the poem and the notes on the poems, typically between three and five minutes. In practice this means that if I wish to consult a note on a poem it can take five minutes to move from the poem to the note then another five minutes to navigate back, giving a time of ten minutes to consult a note. This is not really feasible.
I have had no problem downloading and reading other books, from Waterstones bought after the John Donne.
I have tried deleting and re-loading the John Donne, as well as resetting the reader to no avail.
I contacted Sony support who says that as my other e-books from Waterstones and other sources work perfectly, then the fault lies with “The Complete English Poems” and not the Sony reader.
Please note that I had a similar problem with a Waterstones edition of “the King James Version of The Holy Bible. “ This problem was never resolved.

You need to install more RAM.
Your year and model IMac can take a total of 6 GBs of RAM.
Correct, compatible and reliable Mac RAM can ONLY be purchased from online RAM sources Crucial memory or OWC (macsales.com).
The 6 GB RAM kit can be found here.
http://eshop.macsales.com/shop/memory/iMac/Intel_Core_2_Duo_PC2-6400
If you haven't use this application often, completely uninstall CleanMyMac.
Total, useless "junkware"/"Garbageware"/malware.
http://macpaw.com/support/cleanmymac-classic/knowledgebase/how-to-uninstall-clea nmymac-classic
http://macpaw.com/support/cleanmymac/knowledgebase/how-to-uninstall-cleanmymac-2
Ditch ALL Googlewares. They are ALL a serious resource hog on the OS X system.
https://support.google.com/chrome/answer/95319?hl=en
https://support.google.com/drive/answer/2375081?hl=en
If you do not like Apple's Safari web browser, download, install and try Mozilla FireFox, instead.
The current, up-to-date version of FireFox is fully compatible with OS X and is regularly updated by the great developers of the Mozilla group.
I have, also, stopped using the Google search engine, regularly and use DuckDuckGo as my default search engine.
You have too many and duplicate user login/startup items.
Add or remove automatic items
Choose Apple menu > System Preferences, then click Users & Groups.
Select your user account, then click Login Items.
Do one of the following:
Click Add below the list on the right, select an app, document, folder, or disk, then click Add.
If you don’t want an item’s windows to be visible after login, select Hide. (Hide does not apply to servers, which always appear in the Finder after login.)
Select the name of the item you want to prevent from opening automatically, then click Delete below the list on the right.

I bought my macbook pro on 2013 but last few months its become very slow , is there anyone can help me please ?

i bought my macbook pro on 2013 but last few months its become very slow , is there anyone can help me please ?

Activity Monitor - Mavericks also Yosemite
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy

HELP WITH IPHONE 4S IPHONE URGENT HELP PLEASE?

IPHONE URGENT HELP PLEASE?
for the whole day my network has been 'Searching...'
i have tried airplane mode on and off, turning my phone on and off and network reset and taking sim in and out.
so i backed up my phone and restored to factory settings as i don't think i did the option of choosing manually select a carrier.
my network is still 'searching...' and it won't let my wifi to allow me to activate my iphone. i have tried to connect to itunes and it still won;t work.
i keep getting a message about no activation server.
this is a new iphone. i got it replaced on saturday.
PLEASE SOMEONE HELP ME!!!!!!!!!!!!!!!!!!!!!!!!!!!

Hello,
If this is a new iPhone then you will have free access, as all iPhones come with it, to Apple support. I would have them take care of an issue like this.
Hope this helps.
Regards,
Jake

When I add an event to calendar on my iphone, it updates on my MacBook Pro. But when I add it on my Mac, it does not update on my iPhone. Help please.

When I add an event to calendar on my iphone, it updates on my MacBook Pro. But when I add it on my Mac, it does not update on my iPhone. Help please.

Change your time zones in the settings, They are not on the same time zones.

After updating to iOS 6.0.1 "Yahoo! Server Unavailable" but works fine on iPhone. Help please!

after updating to iOS 6.0.1 "Yahoo! Server Unavailable" but works fine on iPhone. Help please!

GIve it time. Yahoo has been have persistently random issues in past weeks. If you don't want to wait, you can try deleting and readding your account info.
The issue is on yahoo's end and all their updates/upgrades.

HT5492 Can't download kindle app in my iPhone 5 help please,there isn't books in restrictions!!bought in UAE

Can't download kindle app in my iPhone 5 help please,there isn't books in restrictions!!bought in UAE

https://discussions.apple.com/message/22826286#22826286

Very slow data on iphone 5 via wifi or at&t network

Data on wifi or the LTE network from at&t is very slow. My old iphone 3GS on wifi is faster when comparing wifi and past tests using 3G. Is there an issue wih the new iPhone 5 that is known and will be fixed? I was expecting blazing fast data on the new phone and it's slower than my 3 year old iPhone 3GS... Please explain.
Thank you.
Joe

My wife received her white 64 GB AT&T iPhone 5 from on September 26th (after ordering on the 14th from Apple) and she has had recurring problems with her data connections. Specifically, it will find wifi networks and even connect to them, but then it will spontaneously lose connections and she'll get error messages out of the blue saying that she's not connected to a wifi network. Also, while she often has 4 or 5 bars for her cellular signal, the LTE, 4G, 3G, or Edge indicator is often blank. Sometimes, LTE will light up and she'll be able to download at super-fast speeds, but then other times it's just not available. Also, the wifi indicator will show multiple bars (or waves?), indicating that there's a strong wifi signal, but the internet just won't work over it. This will happen while I'm sitting next to her with my AT&T iPhone 4, just sailing away on the internet with no problems at all.
SO, we took her phone to our local Apple Store in Troy, Michigan for a Genius Bar appointment. The Apple Genius told me that he had the EXACT same problems with his new iPhone, so he exchanged it for another one, and that also had the same problems. He thought there were a few things going on. First, the LTE issue is a local issue for us here in the Detroit area. AT&T just rolled out LTE here 2 weeks ago. So, they are having a number of bugs related to the network being new and possibly a little premature. He thinks the network will be better in the next few months, from what he's heard from AT&T. The wifi issue he believes is a software problem, unique to iOS 6 and its installation on the iPhone 5. Since the LTE thing keeps going on and off, and wifi keeps going on and off, the data connection on the phone is very unreliable at this point, and the phone is using a lot of power to try to maintain that connection, hence the faster battery drainage we're exeperiencing as well.
The bottom line is that there was nothing he could do for me. He wouldn't even let me TRY a phone replacement to see if it would be better. His suggestion was for me to sit tight and wait for Apple software updates and for AT&T to improve their network. However, I am scheduled to have my new BLACK 64 GB AT&T iPhone 5 delivered tomorrow (October 1st). I will restore it from my iPhone 4 backup on my iCloud (like I did with my wife's) and I will se how it goes. If that phone connects and works flawlessly while my wife's phone continues to have problems, then I will return her phone for a new one. On the other hand, if my phone behaves the same way as hers, then I guess I'll follow the Apple Genius' advice.

IOS 5 VERY Slow Internet on iPhone 4

Ever since upgrade, non-wifi internet connection is very slow and often times out. This happens even with 4 bars.
I've tried resetting. This was never an issue prior to upgrading. I need non wifi internet for work and this *****!

I've had this exact same problem.
I've done the following things to try to fix it:
*Clear Safari Cookies, history and cache
*delete unused apps
*Hard Reset
*Reset Network settings
*Double Hard Reset
When I did a speed test twice in a row I got:
1. 0.00 Download 0.66 Upload
2. 1.4 Download 0.00 Upload
This shows the spotiness of this connection issue.
I hope we get some answers about resolving this terrible issue.

WIFI too slow after IOS 6 installed. SAFARI is loading very slow for burmese language website. Please help.....

WIFI too slow after IOS 6 installed. SAFARI is loading very slow for burmese language websites. Not only that....many other websites too.....Please help.....Don't expect that ENglish is only language we expect to view on IPAD......
Most websites are responding very slow with safari & many other broswers opera.........Too annoying IOS 6...Give me IOS 5 back...Tell me how.....
I am too angry with IOS 6.......My IPAD 2 & IPHONE 4S all suck after installing IOS 6..........
I can't believe "$600 billions " company released without testing on every devices with different wifi routers, applications on their store.........
Give me some ways to downgrade to IOS 5.1.1......

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
You may think you are connected to the internet, but maybe not. Click on Safari and see if it connects.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Youtube is very slow in my iphone 5s, help please

Similar Messages

Maybe you are looking for