Youtube issue with Belle refresh

Invalid parameters,that's what I got after installing nokia belle refresh on my N8.
tried to do a hard reset,but doesn't work
Moderator's note: Mentioning of illegal third party software removed.
Attachments:
Scr000001.jpg ‏21 KB

Here is the solution: For thos who uses a negative GMT ,like me (Argentina -3 GMT) , will need to change for a positive GMT ,like Germany +2 GMT, then go to youtube with your native browser, see how works, and finally go back to your previous GMT.
PS: Luxintosh was the provider of this solution. (from another forum)

Similar Messages

E6-00: what's wrong with Belle refresh (and other ...

I've been following this forum and have always been up-to-date with E6-00 firmware. I've been almost happy with Belle and was expecting hardly the Belle refresh version for the Music player upgrade. What I got was - ? I don't know. Just the new version and no instant visible change. However... :
- the Music Player is the same. Meaning, no song search and still ridiculous user interface
- the phone tries to establish the data connection quite often even if no application is open
- the phone is hardly responsive from time to time (while looking for the network connection)
- the phone does not want to connect to the wifi. Restart helps.
- the phone loses the network operator and does not reconnect. Happened once (when roaming). Restart helps immediately.
- the Microsoft Apps: pursued upgrade. I personally do not need them. The screen is simply to small to use them effectively.
- (not a complaint) the battery life: I think the battery life is not really affected by the OS. Those complaining about shorter battery life should check how much time they spend using the phone, being connected to wifi, etc.
I'm very disappointed with the E6-00. I try to keep it positive but it keeps me down with every (new) issue. Does anyone has advice what to do with upper mentioned issues? I bought the phone ~2 months after it was available. I'm assuming that these first production series can have hardware issues? My phone was on reparation twice: for the notification light (hardware thing) and bluetooth issues (voice not heard over the bluetooth headset). The latter is still present I think...
I consider buying E71 since there's no other good (Nokia) phone on the market. What makes me sad the most is that my iPod touch does wifi connection and other things smoothlessly... But I don't want an iPhone (which is in principle the same as iPod touch), I just want a good Nokia.
Regards,
P

strelamcqueen:
I agree with your post except for the fact that Belle hosed my E6. Meaning: if you look at all my other posts, it's all about the GPS data functions that were awesome with the E71 then went away with the E6 on Anna. At least with Anna, there was an app called LeGPSData2 that restored most of the E71 GPS functionality. LeGPSData2 is not compatible with Belle. Sooo, I am currently using my E6 ONLY because of the decent camera.
Belle made the UI look pretty but that's it. I found the same problems with the responsiveness that you mentioned and issues with not connecting to my home wifi when I try to browse the net at home. There's nothing like downloading a bunch of big files only to discover that I've chewed up a bunch of data because the phone didn't connect to wifi. I put the wifi widget on one of my home screens and I make sure that I manually connect to wifi now before starting the browser. The Microsoft app via the upgrade were a joke. They actually took over Quick Office so that Excel and Word opened with MS Office Mobile. This would be fine but they open so tiny they are unreadable and they are not editable with MS Office Mobile for some reason. I removed the MS apps immediately.
My battery life suffered a lot after Belle refresh. With normal use as before the upgrade I would get home with about 50% battery with 3G ON. With Belle refresh, The battery won't make it through a full day with 3G on and I end up with about 25% battery at the end of the day with 3G off. Good thing I don't use much data through the day!
This is actually my second E6; long story but the first I upgraded to Belle and was disappointed with the loss of LeGPSData2 app. This one I was forced to upgrade to Belle refresh because while updating Ovi Maps one night, the update completely deleted the Ovi Maps app and I could not get it back without updating the OS to Belle refresh.
So I am with you. I too am very disappointed with the E6 but most of my disappointment comes from the software 'upgrades'. If Nokia would just leave well enough alone, all would be fine. I am sorry I have no advice to take care of the problems you and I are facing. I am in search of a new phone now and if I don't downgrade to an E72, I won't be getting a Nokia again. It's a sad story because I have been a die hard Nokia fan for a long time.
DS
@adrianhughes:
HUH? stelamcqueen is asking advice from other USERS. That's what the forum is about.

My Exchange active sync freezes with Belle refresh

Email don't work anymore !!!!!!
Exchange active sync freezes the phone totally !!!!
How on earth do I remove this update ?
BR. Mike
Moderators notes: Non Relevant remarks removed.

Hi Mike72,
The issue of the mail application going black and returning to homescreen was a problem for few users who have Nokia Belle Refresh and here is the fix refer to discussions.nokia.com/t5/Software-Updates/Problem-with-Mail-App-after-Belle-Refresh-Update/m-p/1559682#M122314 or discussions.nokia.com/t5/Software-Updates/Nokia-Belle-Refresh-FAQ-Please-read-before-posting/td-p/1539052 and I hope it helps your problem.
Thanks.
Ngwangwa - Six Million Ways To Die Choose One

Issue with complete refresh on materialized view when using rownum

Hi all,
I had an issue with rownum when using complete refresh
I am using rownum when creating materialized view and it is generation correctly.But the issue was when i am refreshing the same ,rownum was not getting sorted in ascending order.
anyone had come across this scenario

rownum is determined as the row is output, so "order by rownum" does literally nothing.
http://docs.oracle.com/cd/B19306_01/server.102/b14200/pseudocolumns009.htm

Issue with Report refresh of the data

Hi All,
we have recently upgraded from 11.1.1.5 to 11.1.1.7 version of OBIEE and since then we are facing few issue with the data refresh.
whenever the data gets loaded in the back end the report don't seem to get updated. Neither the Reload Metadata or Refresh option works.
We have to explictly have to go on the RPD and update the row Counts of the object and Close all cursor to Reflect the data.
Is there any why we can do this....
Thanks & Regards
Shashank

What about cache setting?

Issues with 'Structure Refresh' of OLAP Universe!

I have a report based on .unv which in turn is based on a BEx query. I need to update the universe to retrieve objects I recently added to my Bex      query.   I am facing the following issues while refreshing the universe structure through Universe Design Tool.
When the option ‘Delete Obsolete objects’ is checked in the update wizard, UDT closes out.   I then have to restart UDT.
When the option ‘Delete Obsolete objects’ is checked, UDT hides almost all objects and classes with the exception of 1/2 classes and affixes ## before their name.
     I am attaching a screengrab after the refresh is complete when the ‘hide obsolete objects’ option was checked. (No objects in the below screenshot were modified in BEx. This may help you make sense of the error.
The same issue has been reported in this thread.   http://scn.sap.com/thread/3374159
I understand I can create a new universe on Bex query and copy the new objects onto my existing universe. This way I wouldnt have to deal with refreshing structure of the universe.   However, I need to find the cause of this issue and see if it can be fixed. I am using BO 4.0 SP5.
Thank you.

Hi Venkatzeus,
I tried many times but I still cannot reproduce the issue.
In my environment (SharePoint2013+SP1), I insert a list webpart in a web part page within "Pages" library, then enable the web part properties as you mentioned and save the page, then use first user account(e.g. Administrator)
to edit/change the webparty "selected view" property option and click "Apply", and meanwhile the second user account with full control permission keeps this webpart page opening in view mode with IE browser on another
machine, 30 seconds later, the webpart content refreshed, however it doesn't change to Edit mode for the second user.
Could you please provide more information/step to let us reproduce this issue?
Does that "When one of the user is editing the list view" mean change the list view of the web part on webpart page?
Have you tried creating another pages library and pages, then insert another test list web part in your environment, see if it could be reproduce and compare the diference?
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support

Adobe flash player (youtube) issue with RDP

I am experiencing a problem while using youtube over RDP on
Windows Server 2008.
When I play youtube video and disconnect while video is
playing then in the background video is supposed to continue to
play. When I reconnect to session I get back to original point the
time of disconnection and morever video is stopped. Does anybody
has any idea about this issue?

See:How to perform a "clean install" of Flash Player in Mac OS X
I have Flash Player 11 on my Mini (Mountain Lion 10.8.4) with Safari, Opera and Firefox, with no troubles.
BTW, there is so little "malware" for Macs, that unless you seriously try to find it and deliberately install it, it ain't happenin'...

Issue with fast refresh on a materialized view

Hi,
Oracle DB version is 10.2.0.3
We have a matierialized view created using this script. We have materialized view logs on these six tables.
By default, it is set to ON COMMIT .
When a batch job is run every morning (usually 100-200 records) we set it to ON DEMAND and then bring it back to ON COMMIT. It takes around 1-2 minutes.
If the batch is unusually big, like say 100,000 it takes more than 5 hours to put it back on ON COMMIT. (We analyze the schema (GATHER STALE) before refreshing the MV.) Trace shows deletes taking a long time.
When I see a big batch, I usually drop the view and recreate it with indexes (there is also a context index). Takes 30 mins to do the whole thing.
I tried refreshing it COMPLETE when the num of rows is high but it still takes more than 2 hours..(I killed it)
Is there any way to speed things up without dropping and recreating the MV ?
thanks
Mat view creation script:
CREATE MATERIALIZED VIEW WCC_INTERNAL_SEARCH_M
TABLESPACE ICV_TS_WCC_DATA
NOCACHE
LOGGING
NOCOMPRESS
NOPARALLEL
BUILD IMMEDIATE
REFRESH FAST ON COMMIT
WITH ROWID
AS
SELECT orgname.ROWID orgname_rowid,
cnt.ROWID cnt_rowid,
locgrp.ROWID locgrp_rowid,
cntry.ROWID cdcntry_rowid,
addrgrp.ROWID addrgrp_rowid,
addr.ROWID addr_rowid,
cnt.cont_id cont_id,
decode(cntry.name,'US',substr(addr.postal_code,1,5),addr.postal_code) postal_code,
cntry.name country,
UPPER(addr.addr_line_one) addr_line_one,
UPPER(addr.addr_line_two) addr_line_two,
UPPER(addr.addr_line_three) addr_line_three,
UPPER(addr.CITY_NAME) city_name,
UPPER(cnt.CONTACT_NAME) display_name,
UPPER(orgname.ORG_NAME) org_name,
addr.prov_state_tp_cd
FROM orgname,
contact cnt,
locationgroup locgrp,
cdcountrytp cntry,
addressgroup addrgrp,
address addr
WHERE locgrp.cont_id = orgname.cont_id
AND locgrp.cont_id = cnt.cont_id
AND addrgrp.location_group_id = locgrp.location_group_id
AND addr.country_tp_cd = cntry.country_tp_cd
AND addr.address_id = addrgrp.address_id
AND cnt.INACTIVATED_DT is null
AND locgrp.END_DT is null
AND orgname.END_DT is null
AND cnt.person_org_code = 'O'
AND cntry.lang_tp_cd = 100
AND locgrp.member_ind = 'Y'
AND locgrp.loc_group_tp_code = 'A'
ORDER by org_name,city_name,postal_code,country;

This is the script that creates the preferences and then the context index.
exec ctx_ddl.create_preference('STEM_FUZZY_PREF', 'BASIC_WORDLIST');
exec ctx_ddl.set_attribute('STEM_FUZZY_PREF','FUZZY_MATCH','AUTO');
exec ctx_ddl.set_attribute('STEM_FUZZY_PREF','FUZZY_SCORE','60');
exec ctx_ddl.set_attribute('STEM_FUZZY_PREF','FUZZY_NUMRESULTS','100');
exec ctx_ddl.set_attribute('STEM_FUZZY_PREF','STEMMER','AUTO');
exec ctx_ddl.set_attribute('STEM_FUZZY_PREF', 'wildcard_maxterms',15000) ;
exec ctx_ddl.create_preference('LEXTER_PREF', 'BASIC_LEXER');
exec ctx_ddl.set_attribute('LEXTER_PREF','index_stems', 'ENGLISH');
exec ctx_ddl.set_attribute('LEXTER_PREF','skipjoins',',''."+/-&');
exec ctx_ddl.create_preference('ICV_WCC_INT_SEARCH_CTX_PREF', 'BASIC_STORAGE');
exec ctx_ddl.set_attribute('ICV_WCC_INT_SEARCH_CTX_PREF', 'I_TABLE_CLAUSE','tablespace ICV_TS_CTX_IDX');
exec ctx_ddl.set_attribute('ICV_WCC_INT_SEARCH_CTX_PREF', 'K_TABLE_CLAUSE','tablespace ICV_TS_CTX_IDX');
exec ctx_ddl.set_attribute('ICV_WCC_INT_SEARCH_CTX_PREF', 'N_TABLE_CLAUSE','tablespace ICV_TS_CTX_IDX');
exec ctx_ddl.set_attribute('ICV_WCC_INT_SEARCH_CTX_PREF', 'I_INDEX_CLAUSE','tablespace ICV_TS_CTX_IDX compress 2');
exec ctx_ddl.set_attribute('ICV_WCC_INT_SEARCH_CTX_PREF', 'P_TABLE_CLAUSE','tablespace ICV_TS_CTX_IDX');
exec ctx_ddl.set_attribute('ICV_WCC_INT_SEARCH_CTX_PREF', 'R_TABLE_CLAUSE','tablespace ICV_TS_CTX_IDX');
CREATE INDEX WCC_INT_SEARCH_CTX_I1 ON WCC_INTERNAL_SEARCH_M
(ORG_NAME)
INDEXTYPE IS CTXSYS.CTXCAT
PARAMETERS('Wordlist STEM_FUZZY_PREF
LEXER LEXTER_PREF
STORAGE ICV_WCC_INT_SEARCH_CTX_PREF');
DB is 10.2.0.3

Issue with belle fp2

i upgraded my 701 to symbian belle fp2. now i can't find facility to send multiple pics from gallery. moreover the videoediting is bad. i can only trim it. so as photo editing. in the former version i can use many options in video editing. now i can't. so, is there any possibility of another upgrade to fp2?

@ravi626
Whilst it may be technically feasible to recover these applications it is beyond remit of this forum to advise upon how to implement this procedure, but can co-exist with latest version upon Belle FP2:
Happy to have helped forum with a Support Ratio = 42.5

Issue with VO refresh

Hi,
I am creating a custom OAF page for timecard where if we change the period in update timecard mode, it should show the entries for the new period.
The VO used for showing the data for time entry is not EO based since my timecard is based on APIs provided by OTL (HRMS) module. I am calling the apis through the a db procedure called in AM. The VO is used for querying the data.
The issue description is
When I change the period, my time entry data is not reflecting the change of data. I am using an advanced table for showing the time entries and period field is a messageChoice bean for which I have fireAction property and also saying submit as true. However when I change the period in update timecard mode, it is not showing the new data but retains the data queried for first time. I have a action periodChange on message choice bean and I am calling back the same page using below code in process form request. I am trying to clear the time entry data by all possible methods but it is getting retained everytime.
if ("periodChange".equals(event)) {
OAMessageChoiceBean tperiod = (OAMessageChoiceBean) webBean.findChildRecursive("TimePeriodName");
String newStartTime = tperiod.getSelectionValue(pageContext);
pageContext.releaseAllRootApplicationModules();
am.resetState(true);
if (action.equals("Create")) {
pageContext.setForwardURL ("OA.jsp?page=/xxrpay/oracle/apps/hxc/webui/TimecardPG&ResourceType=PERSON&retainAM=N&Action=Create&StartTime="+newStartTime+"&StopTime="+stopTime+"&ResourceId="+resourceId,null, (byte)0, null, null, false, "N",OAException.ERROR);
if(action.equals("Update")){
pageContext.setForwardURL ("OA.jsp?page=/xxrpay/oracle/apps/hxc/webui/TimecardPG&ResourceType=PERSON&retainAM=N&Action=Update&Timecard_id="+tcId+"&StartTime="+newStartTime+"&StopTime="+stopTime+"&TimecardApprovalStatus="+pageContext.getParameter("TimecardApprovalStatus")+"&ResourceId="+resourceId,null, (byte)0, null, null, false, "N",OAException.ERROR);
I have even tried cancelling the VO query and clearing the AM, advanced table as well as VO cache.
Thanks,
Gourishankar

Kumar,
I have a similar need and I apologize upfront that I am new to OAF (and Java). :(
Basically, when I return to the search page from viewing details, the previous search is saved and cannot be cleared without going home and coming back in.
I know that Vo.clearcache(); is the solution.
So, I need to add this to the processRequest method in the CO of my search page... which does not have a direct reference to the VO.
How do I set Vo in this case?

I'am using nokia c6-01 with belle refresh

please help to extend my unlimited music download..
There is no slip of paper box ...

If the Voucher isn't there in the Sales Package or the Box doesn't mention about it, the phone does not come with the FREE downloads. Anyways, contact the Retailer / Authorised Nokia shop from where you bought the device for more clarification. You may also use the 'Contact Us' tab at the bottom of this page and locate the contact no. of your local Nokia Careline and get the things sorted.

Brightness issue with belle on e6

my brightness settings on e6 belle comes to level 0 automatically even if i set it on any higher level after some time....can anyone tell me how to solve this....

power saving m0de will be activated. Deactivate that m0de 1st and ensuer that your m0bile battery is charged m0re than 20% and then change the level of brightness. But 1st of all ensure that power saving m0de isn't activated

Belle Refresh Issues

I have recently updated my N8 with Belle Refresh & I have noticed a few issues. Apologies if any of these are answered elsewhere but I couldn't see them amongst all the posts:
1) My phone doesn't seem to vibrate for texts or calls anymore. I've missed several calls on silent as a result. Before anybody asks yes I have checked that vibrating alert is set to on. Interestingly it does vibrate for emails.
2) My battery life has been drastically reduced meaning that I frequently have to charge it twice a day. I can go to bed with full charge & it's exhausted by the time I wake up. I've adjusted my email retrieval settings & don't leave apps running.
3) Something seems to be eating my data at a much faster rate than before but I can't work out what. NB I make sure I use wifi wherever possible.
Any suggestions regarding any of the above will be gratefully received. Thanks

Hi Paul Wilk,
Welcome to the Forum.
To perform the "3 finger deep reset" which is depress these three keys simultaneously "*" "3" "green phone" and then power on phone whilst keeping those same three keys depressed until you hear start-up tone.
This should ONLY be done if the device doesn't power up normally anymore and it wipes everything in the Phone memory that is not part of the ROM.
Don't forget to save all your files before.
Pfrancoise.
If this post has helped you to solve this issue, please press the "accept as solution" icon. Kudos would always be appreciated.

Issue with refresh of an input schedule

Hi Experts,
We are facing an issue with the refresh of an input schedule.
We have a custom refresh via macro whereby we first refresh 3 reports in other tabs and then refresh the main schedule.
The problem is for a particular test id we need to click on refresh twice but for developer id we refresh it only once and see the value.
Can you help what could be the cause of it.
In the main report we have all dimensions in either row or column axis and we are also using Dimension override for 3 dimensions.
Let me know if any other info is required.
Thanks
Raman.

Hello,
Could you please specify the following information:
1) What do you mean by "custom refresh"? is this feature developed by the custom development team?
2) What are the level patch and the version of the product?
Regards,
Inès

Serious Issues with Regions

JDeb 11.1.1.3, Windows 7 x64
I am finding serious issues in regions.
I have a series of page fragments defined in a ADF task flow.
When I change data in them the Commit does not reflect the change unless I go to another page and return (unacceptable for the client).
When I programatically add records to a table, they are not shown - the table does not refresh - even with an execute button (which should re-execute the query and redisplay the table), unless I leave the jspx that contains the region (unacceptable).
I have tried to requery, get the datacontol view object and requery it - I believe the data is updated - the table just will not show the data (not refreshing).
on pages with forms - when I create a new record (CreateInsert) and add data - the save button never activates until you move to another page and back again.
It looks like there are overall issues with the refresh functions in the region.
maybe I am missing some "magic", but this should be simple - straight forward - using partialTriggers - as it is in any other jspx.
Are these issues bugs or are there special considerations in regions for this.

Read carefully the article "17.5. Refreshing an ADF Region" in the "Fusion Developer's Guide for Oracle ADF".
It is not enough to set the partialTrigger attribute of the <af:region> tag in order to refresh the task flow. In order to refresh the task flow you should use the attributes "Refresh" and/or "RefreshCondition" of the taskflow binding in the corresponding PageDef.
For example, if your taskflow has parameters and you want the taskflow to be refreshed if some of the parameters has been changed, then you should set <tt>Refresh="ifNeeded"</tt>.
If your taskflow does not have any parameters then you can set <tt>Refresh="default" RefreshCondition="#{<some_EL_boolean_expression>}"</tt>. In this case the taskflow will be refreshed depending on the value of the specified boolean expression. For example, you can base the boolean expression on a managed bean property that is set by you to true whenever you want the taskflow to be refreshed.

Youtube issue with Belle refresh

Similar Messages

Maybe you are looking for