Youtube loading is stop and start

I noticed that since I downloaded the latest Adobe flash player, the Youtube videos load very slowly. The loading is stop and start.
Before I installed the latest flash player Youtube videos worked well. No problem.
I repaired permissions. I even installed old versions of flash player, flash player 9 and flashplayer 10UB. I uninstalled before I installed the other versions. I made sure to repair permissions after installing.
I am back to installing the newest version and repairing permissions. After restarting the computer, Youtube videos still download in a stop and start way with a few seconds in between.
I turned off iPv6 as well. Nothing helps.
The strange thing is that Youtube videos worked well before I downloaded the latest flash player.
This is a MacBook Air rev C HDD 120GB. I have Leopard OS 10.56.
It's the same for Safari, Firefox and Opera. All browsers are up to date.

yes we have most recent adobe update installed.
but we've had some issues with the internet connection - this is our vacation place- so it's dsl and our linksys seems to be having problems - will know more later this week when new linksys unit is installed.
thank you

Similar Messages

For the past few days videos are not playing properly. They appear to load but stop and start, even though the line of thumbnails shows up at the bottom. Clicking play does nothing.

There seems to be a major problem with video playbacks both from web sites and YouTube. If I click on a video the loading circle shows it is loading but either the video starts for 2-3 seconds and stops, or it won't start at all. At the bottom of the screen there is a section that shows individual thumbnails for the video and that shows that the video has loaded, but it refuses to play. I just tried a youtube video on my iPhone and the same thing is happening. Some occasional videos seem to work okay but I have spent much time trying to watch clips.

Use SpeedTest to test the speed of your internet. If slow, contact your ISP to confirm if the problem is on their end.
You have 2 versions of QT. Version 7.x is inside your Utility folder. Try that one.
=================
The latest version of Adobe FlashPlayer can be obtained from here: http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash
(You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157 and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

When I watch youtube videos, it always stop and start. Very annoying. Any good apps that we can use.

YouTube videos always stop and start . Is there an apps that we can download to stabilize the video.

Are you trying to watch YouTube from a web browser on iPad or from the YouTube app?
Should be running fine from the YouTube app on the iPad unless you have a slow connection.
Our family uses DSL (4-5 Mbps) and we stream video both with iPads, computers and TV with,mostly, no issues like buffering or data degradation/pixellation. It all depends on how much traffic there is on the Internet at any one specific time.
Heavy Internet traffic on different days at different hours of the day, from your ISP, can also be a factor in slowing down your Internet connection.

My itunes store home loads fine but when i try and press redeem it will start to load then stop and go blank. what should i do?my itunes store home loads fine but when i try and press redeem it will start to load then stop and go blank. what should i do?

My itunes store home page opens just fine and i can search music and evrything but when i press the "redeem" button it will begin to load then stop and go completely blank. what should i do?

I figured it out!
I read a solution for something that sounded similar.
Anyone in similar position:
Open iTunes app on iPhone, and pick an option from bottom, such as music. Then scroll down to bottom of page and where your iTunes ID is, press on it, and pick sign out.
Then return to home screen, and double press home button and press and hold on first icon showing, until a minus symbol appears in the top left of icons present. Press on each minus symbol on each app in turn, until all app icons have disappeared. Then Restart the phone by pressing and hold the home button and the on/off/standby button at top of phone, until the apple symbol appears in centre of blank screen.
Swipe to turn phone fully on and open settings and scroll down to iTunes and apps option and tap that. Pick sign in and put in your apple ID, it will accept it and then return to home screen and open iTunes a you'll find it works fine
Simple really, but some like me won't think f this themselves!
Hope that helps

A few selection of websites after fully loading become blank and start an infinite loop of loading. I reinstalled firefox once already and the problem persists. What can I do?

A few selection of websites after fully loading become blank and start an infinite loop of loading. I reinstalled firefox once already and the problem persists. What can I do?

Sorry I do not know what the problem may be. 
If no-one comes up with better ideas of what causes this then my questions and suggestions:
What do you mean by an infinite loop ? 
The page loads and then goes blank. What exactly happens next, does the page fully load and fully display again before going blank, and repeat this cycle endlessly in the same tab.
You do say the problem persisted in safe-mode and you had looked at the basic troubleshooting article. Buy that you can stop the problem by disabling javascript.
* did you disable all plugins - and did you still get the problem then ?
As you mention disabling javascript stops the problem, have you tried with Java script enabled but
* block popups ON
* load images automatically OFF
* advanced options - ALL OFF What happens do you get the problem then or not.
While on this firefox site if I look at the error console Ctrl+Sift+J or Tools -> Error console If I clear the console content and reload the webpage the error console shows only a couple of messages. YouTube home page give a lot of yellow triangle warnings about 200, but no red warnings, do you get red warnings.
You could also try on the problem sites eg YouTube changing the permissions with tools -> Page Info | Permissions
Did you try the Basic Troubeshooting suggestion of making a new profile. (Heeding the warning not to delete settings, otherwise you loose all bookmarks etc) did that help ?

How may I automatically stop and start Mail services at a set time please

Hi folks. I was wondering if anyone could tell me how to automatically stop and start Mail services (or any other services) at a set time please in Leopard Server? Is there a script someone has created which might help?
Cheers, David ( a realy newbie when it comes to administering OS X server)

launchd works through a series of XML documents that define tasks to run, either at launch, on a time schedule, in response to network events, etc.
So you'll need to create two .plists - one to start the mail server and one to stop it. They should be saved in /Library/LaunchDaemons. I'd suggest something like:
/Library/LaunchDaemons/local.postfix.stop.plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple
.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
 <key>Label</key>
 <string>local.postfix.stop</string>
 <key>ProgramArguments</key>
 <array>
 <string>/usr/sbin/serveradmin</string>
 <string>stop</string>
 <string>mail</string>
 </array>
 <key>StartCalendarInterval</key>
 <dict>
 <key>Hour</key>
 <integer>1</integer>
 <key>Minute</key>
 <integer>00</integer>
 </dict>
</dict>
</plist>
and /Library/LaunchDaemons/local.postfix.start.plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple
.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
 <key>Label</key>
 <string>local.postfix.start</string>
 <key>ProgramArguments</key>
 <array>
 <string>/usr/sbin/serveradmin</string>
 <string>start</string>
 <string>mail</string>
 </array>
 <key>StartCalendarInterval</key>
 <dict>
 <key>Hour</key>
 <integer>4</integer>
 <key>Minute</key>
 <integer>00</integer>
 </dict>
</dict>
</plist>
You'll need to either use launchctl load /Library/LaunchDaemons/local.postfix.stop (or start) to load the tasks, or reboot your server.
I'm curious, though, as to why you want to do this. Mail is typically one of the services that people want to run 24/7 so they don't miss out on any emails (even though SMTP can tolerate this). Why do you want to shut yours down?

Stop and Start Services

Hi All,
We are stopping and starting the services for daily backup. Is it advisable to stop and start services.
Because client wants to stop the services before taking the backup anf start the services after backup.
In this scenario, what services do we need to stop for backup process.
Regards,
Kumar

Hi Saichand,
Thanks for the response.
Do u have any idea on the below:
Our scenario is the below:
We have a daily back of BI folders and Loading data from ERP to 10g database.
We logged in with remote desktop user A from ABC system to BI system and We created a batch file to start and stop all the BI the services and scheduled this batch file using windows schedule tasks. These batch files will stop the BI services and after 30 minutes another batch file will load data into the database, after 2 hours start services batch file will start the BI services.
When we open the BI Dashboards in the morning, all the dashboards and reports are working fine. But when I login to BI system, OC4J windows is not visible and dashboards are not coming and when we check the logs, LOGs says OC4J is running.
Please suggest us the solution.
Regards,
Kumar
Regards,
Kumar
Edited by: user597882 on Aug 26, 2010 3:35 AM

The sequence to stop and start xMII?

Hi, good afternoon:
Could anybody provide the sequence to stop and start xMII?
Is it different from xMii11.* to xMii12.*?
Thanks!

Yes, the steps are same as what I suggested before.
You can find plenty of material on SDN like blogs, articles, best practices and so on...
The best place would be to start with is [MII WIKI|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=15601]
Below are few other very useful links,
[Blogs|Weblogs related to SAP xMII; ( you can also find many blogs under category Manufacturing, xapps, mii etc.. on SDN)
[Best Practices Guide|MII 12.X Best Practice Guide is now available;
And also can find loads of threads on MII 12.x, 11.x installations/configurations/troubleshooting simply use large search date range.
Hope this helps!!
Regards,
Adarsh

Buffered videos stop and start

I am trying to watch online video and tv. The video streaming stops and starts. It can be youtube, vimeo, or a television show online -- same poor result. I have a very slow connection. Knowing this, I always wait for the video to buffer -- there is always a greyed buffered bar well ahead of where I am watching. The video still stops and starts. Is this a connection issue or something else? Thanks.

T1 that is brutally slow, but I had hoped that despite how slow the connection is, the buffering would eventually get it downloaded. So even though its buffering, the slow T1 can still make the videos stop and start?

defunct process when stop and start web server

Dear all,
I am using Sun One Web Server 6.1 SP6. When i try to stop and then start the web server. The <defunct> process is generated (his parent PID points to webservd).
The following is the result:
1st stop and start the web server (defunct process is generated)
2nd stop and start the web server (defunct process disappears)
3rd stop and start the web server(defunct process is generated)
4th stop and start the web server (defunct process disappears)
Here is my magnus.conf
ServerID www
ServerName www.abc.edu.hk
ErrorLog /i03_01/SUNWwbsvr616/https-www/logs/errors
PidLog /i03_01/SUNWwbsvr616/https-www/logs/pid
User nobody
DNS off
Security off
ClientLanguage en
AdminLanguage en
DefaultLanguage en
RqThrottle 512
StackSize 131072
Init fn="load-modules" funcs="caspreq,caspinit,casptrans" shlib="/i03_01/casp/module/sunos5_optimized/netscape_6.x/nes_casp2.so"
Init fn="caspinit" casplib="/i03_01/casp/asp-server-3078"
Init fn="load-modules" funcs="htaccess-init,htaccess-find" shlib="/i03_01/SUNWwbsvr616/plugins/htaccess/htaccess.so"
Init fn="htaccess-init"
Init access="/i03_01/SUNWwbsvr616/https-www/logs/access" format.access="%Ses->client.ip% - %Req->vars.auth-user% [%SYSDATE%] \"%Req->reqpb.clf-request%\" %Req->srvhdrs.clf-status% %Req->srvhdrs.content-length% \"%Req->headers.referer%\" \"%Req->headers.user-agent%\"" fn="flex-init"
Init fn="load-modules" shlib="/i03_01/SUNWwbsvr616/bin/https/lib/libj2eeplugin.so" shlib_flags="(global|now)"
TempDir /tmp/https-www-61c30017
# Load modules for PHP
Init fn="load-modules" funcs="php4_init,php4_execute,php4_auth_trans" shlib="/i03_01/SUNWwbsvr616/bin/libphp4.so"
Init fn="php4_init" LateInit="yes" errorString="Failed to initialize PHP!" [php_ini="/i03_01/SUNWwbsvr616/https-www/config/php.ini"]
# Enable statistics
Init fn="stats-init" update-interval="5" virtual-servers="100" profiling="yes"
any ideas? Thank

- which OS & version are you running into this issue ?
- By definition, defunct processes (or zombie processes) are processes that have exited prior to it's parent calling a wait() on it to get the return status .
- couple of things I can think of to narrow down the cause of this issue
1. disable ASP & php plugins and see if this still causes this issue
2. try starting the web server with log level to finest and see fi you get any useful information from the server error logs
hope this helps

The video action stop and starts momentarily at random

hi-
dell xps 8500 running windows 8.1. Purchased march 2013. 8 gb ram 1 tera bit hd. Amd radeon video card 1 gb ram, video card was tested by dell twice. Refreshed the whole computer, reinstall everything fresh. All drivers Bios updated. Playing a game: zuma revenge, the action stops and starts randomly. This is the reason why i went thru a complete refresh. Problem still exists. help please.
Phil

Hello,
Potentially unsafe versions of the Java plugin are "Click to Play" blocked, meaning that you have to click to activate Java for each site. See the [[How to enable Java if it's been blocked]] article for more information.
'''Note:''' To make sure that your Java plugin is working, you can visit the test pages listed in the article, [[Use the Java plugin to view interactive content on websites]]. If an "Activate Java" message box appears, click inside the box to activate the Java plugin.
When you see the "Activate Java" message box, simply click it to load the Java content normally.
 
[[Image:Fx24-JavaActivate]]
If there is no visible area to activate Java content in the page, click the red plugin icon in the address bar. In the message panel that opens, choose "Allow Now" to enable Java content temporarily.
 
[[Image:Fx24-JavaAllowNow]]
 
The next time you visit the site or any other that uses Java you will see this message again.
If you want to always activate Java for a particular site, you can use the "Allow and Remember" option shown above.
After activating Java, you may also see a "Security Warning" dialog box, asking you to confirm that you want to run Java. This warning comes from Java itself, not from Firefox.
Does this solve your problem? Let us know.

Order of stop and start of reporting services

Hi All,
I am using 11.1.1.3 version in my laptop,i want know the correct order of stop and start the services,please help me on this.
Thanks
Hypuser

The full order list can be found at :- http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_install/ch05s02.html
Cheers
John
http://john-goodwin.blogspot.com/

Music skips and stops and starts

Hello, we have just got a nano to replace a 3rd gen iPod.
I have around 50 gigs of music on a lacie USB drive, and the music plays flawlessly from here in iTunes.
However once imported into the nano, there is distortion, jumps and clicks in the music and sometimes the song will just stop and start from the beginning.
Any ideas?

Gary,
You chould check out this thread we have going.
http://discussions.apple.com/thread.jspa?threadID=356911&tstart=0
Toshiba Satellite P25-609 Windows XP Pro Media Center Edition iPod Nano 2G (as black as my cold, dead heart)

MacBook Pro hard disk stops and starts

Why does the hard disk on MacBook Pro stop and start every 15 minutes or so? All operations suddenly stop for five to ten seconds during the spin down. I don't recall this happening in OS 10.5. The preference "Put the hard disk to sleep when possible" is NOT ticked, therefore the drive should never spin down.
Any ideas?

Try resetting your SMC. Resetting the System Management Controller >>
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G + 120G OCZ Vertex 3 SSD Boot HD 

APEX 4.2 aligning issue of Stop and Start Grid Layout item

My APEX application application is in the process of moving from 4.0 to 4.2. I am experiencing an issue with aligning (left margin justified) of Stop and Start Grid Layout items that have a border around them. Earlier I had an issue with the border itself not showing up in the 4.2 application. I was able to resolve that with a workaround by adding inline code in the CSS section of the page: #P23_OFFICE_START_TBL {width:682; border:1px solid #369; margin:5px;}. This created the border which I needed, but there are 2 Stop and Start Grid Layout items that are indented and not aligning with the border of the previous line. I have tried a number of different things but none of them have worked. This seems like a very simple issue to fix but I am having a tough time resolving it.
I tried to put the item in question in a different grid, which corrected the indention but then I lost the border around the item. It seems that the above CSS code does not work on the new grid. I also tried to put attributes such as margin-left:5px; float: left; clear: left; float: left, in the CSS code but that did not work, too.
Any suggestions?
Thanks
Ajay K

I deleted and added back the Stop and Start Grid Layout items not aligning properly. This worked. Apparently, the 4.0 to 4.2 upgrade did not handle/convert these items properly. Deleting and adding them back resolved the issue.

Youtube loading is stop and start

Similar Messages

Maybe you are looking for