YouTube loads black screen for first five seconds

Starting early January 2013 in Firefox, YouTube videos are loaded as blank black screens for the first five seconds. At the 0:06 mark, videos start playing normally. This is not an issue in Chrome or IE. Tested with all plug-ins and add-ons disabled (except Flash player). Plug-ins/add-ons updated. Tried re-installing Firefox with no solution. Help? Thanks!

You can check for problems caused by recent Flash updates and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in Flash 11.3 and later
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting

Similar Messages

My iPhone 3G phone button no longer works. If I push it I get a black screen for a few seconds then back to the home screen. Everything else is ok. Any ideas how to fix this?

The phone button on my iPhone 3G no longer works. Everything else on the iPhone works fine. I can receive incoming calls. I can make calls directly from Contacts. But if I press the phone button I get a blank white screen for a few seconds then it goes back to the home screen. I've tried the hard reset and also restoring orignall settings via iTunes but keep getting the same problem. Does anyone know how to fix this?
Thank you, Neil.

Thanks for the advice but I've tried resetting network settings and also the reset by pressing home and sleep buttons until getting the Apple logo. Still have the same problem. To be clear (because I mistakenly typed black instead of blank in the title to this thread): If I press the phone button I get a BLANK WHITE screen for a few seconds then it goes back to the home screen. I doubt it's the SIM card as I can receive calls and make them directly from contacts. What I can't do is view my favourite numbers or missed calls or access my voicemail, i.e. all the things you get to via pressing the phone button.

Screen flashing/black screen for 1-2 seconds - 7850 power edition 2gb/OC

I recently bought the MSI R7850 Power Edition 2GD5/OC. I have installed amd catalyst 12.10. I have no issues while playing games...the only game i have played since i bought the card is prototype 2 (all settings set to high). The problem is while browsing or when not playing my screen flashes (just once - screen becomes black) for about 1-2 seconds. This does not happen regularly, but quite a few times.. i have uninstalled and re-installed the same catalyst version twice (downloaded from different sources - one from msi and the other from amd). The problem still persists.
Board: ASUS P8-H67-M PRO
VGA: MSI R7850 Power Edition 2GB DDR5/OC
PSU: Cooler Master GX550 550W (44a 12v rail)
Intel Core i5-2500K Sandy Bridge 3.3GHz (3.7GHz Turbo Boost) LGA 1155 95W
MEM: Corsair 1333 8gb (2x4gb)
HDD: Seagate 500 GB 7200 rpm
Thanks.
OS: Windows 7 64bit ultimate.

I've experienced the same issue exactly as described, with the R7850 Twin Frozr OC Edition. However, I've also experienced a crash or 2 in which the screen goes black and the monitor goes to sleep. The computer doesn't wake up and I'm forced to do a hard reset. One such event was severe enough that I was unable to restore Windows 8 and had to do a full reinstall...!)
Everything is clocked at factory default, passes Memtest 86+, Prime95 overnight run, even FurMark successfully...
Board: ASUS P8Z77-M
Bios: American Megatrends Inc., v1708
VGA: MSI R7850 Twin Frozr III 2GD5/OC
PSU: Seasonic X-750 (+12V@62A)
CPU: Intel Core i5-3750K
MEM: Samsung DDR3 PC1600 8GB (2x4GB)
HDD: WD 500 GB 7200rpm
COOLER: GPU: Stock. CPU: Xigmatek SD1283 Gaia w/Scythe 120mm Slipstream PWM
Sound card: Creative SoundBlaster X-Fi XtremeGamer
OC: No overclocking, factory default.
OS: Windows 8 Pro, 64-bit
When I tried to save the GPU-Z BIOS settings to a file, my computer crashed my computer (!)... Hopefully this is sufficient to indicate if I should follow the same steps or if this is a different issue / hardware issue / ???
TechPowerUp GPU-Z 0.6.7
Driver Version: atiumdag 9.2.0.0 (Catalyst 12.10) / Win8 64
BIOS Version: 015.017.000.000.000861 (113-C4030400-100)
edit:
S/N: 602-V273-010B1210251006
Also updated format of table above
(Perhaps worth noting that the box didn't include any driver CD for some reason)
Thanks for the help.
-DH

Ver 10.0.1. Entire screen blacks out for a few seconds when scrolling.

I recently updated to Reader X 10.0.1. Now when I scroll through a large document my entire screen blacks out for a few seconds. So far it has recovered. I get an error message saying that the NVidia nView driver (ver. 135.50) has stopped responding. I am running Windows 7 Pro on an HP Laptop, feeding to a large Samsung monitor. Never happened prior to this update. Any fixes/ideas?

You are still under warranty. Call Apple Care. Make sure you get a case number as all repairs have an additional 90 days of warranty.
#1 - You have 14 days from the date of purchase to return your computer with no questions asked.
#2 - You have 90 days of FREE phone tech support.
#3 - You have the standard one year Apple warranty.
#4 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years. You can obtain AppleCare anytime up to the first year of the purchase of your computer.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired.

I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Y

I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite. Please help!

Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.

White/black stripes on my screen for a few seconds on my Macbook Pro Retina

Hello,
Sometimes there appear on white/black stripes on my screen for a few seconds. There isn't a specific programm or anything when he does that. It comes and it goes. I don't know if it's serieus problem. Do somebody know what to do?
Thanks

Hi there,
I would recommend taking a look at the troublehsooting steps found in the article below.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
-Griff W.

Screen blacks out for a few seconds occassionally

Sometimes my screen blacks out for a few seconds, then comes back on again. I have an original Titanium powerbook. Is this a warning signal of worse to come? I know I should replace the computer soon, but it's working just fine for now. I just don't want it to die before I've moved on to a new machine.

Hi Julie,
Obviously no one can predict with certainty what the future will bring, but if I were in your shoes, I would certainly think there was worse to come.
Many things could be causing this, but it sounds like a short circuit or bad connection, possibly with the display cables running through the hinges, or where they connect to the logic board. It could also be a sign of the display dying, though they usually just get dimmer and dimmer or simply die.
Does the "blinking" correspond to any movement of the PB?

My iPad screen has gone black. I have tried resetting it with the sleep and home buttons and it only flashes the apple on the screen for a nano second and then it goes black again. I can even hear notifications arriving, but I cannot see anything...

My iPad screen has gone black. I have tried resetting it with the sleep and home buttons and it only flashes the apple on the screen for a nano second and then it goes black again. I can even hear notifications arriving, but I cannot see anything...I'd rather not reset it to the factory settings as I have a lot of things I worry about using. Either way seems to me that the system itself is working since I can hear it working, but its the screen that isn't. It has not been dropped and has been in a case for years! Please help!

When the power is on and I press the home button, I can slide my finger where the slider bar "would be" and it makes the noise as if its "opening" flashes a blue screen then returns black...

VMware View Session go Black screen for some seconds

Hi Guys,
Recently one of my client is facing issues that VDI Desktop session is going black screen for few seconds and automatically session comes back. I have increased PCoIP Configure the PCoIP session Bandwidth floor to 200. still facing same issue.
Note : All user facing this issue is in branches and we have 2 GBps pipeline Datacenter to Branches. Normally 40% is the network utilization.

Sorry, I was thinking the APEX 2800 cards were related to this, but that was a different ticket I was thinking of. So scratch that.
As far as this problem goes, I have seen this issue happen numerous times. It only happens with users with dual monitors. Here's a workaround: Control Panel > Mouse > Pointers > Scheme > Select a non Aero scheme
It took VMware quite a few months, but they finally generated a KB for it and closed my ticket: VMware KB: Zero client monitors will randomly go black for 1-2 seconds

When i try to play a youtube video it plays for only two seconds

when i try to play a youtube video it plays for only two seconds with sound but the screen stays black. it takes a little more time for the video to load also. then it crashes which ever internet program i am using. But whenever i turn off my plug-ins it works totally fine. how do i fix this? this has never happened to me before. i tried to uninstall flash player and reinstall but it fixes nothing, this has been going on for two days now.
i use safari and firefox and both dont work

Click here and download Flash.
(102455)

I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?

I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."

When i type in my correct password on the login screen and press enter it just goes to a blue screen for a few seconds then goes back to the same login screen again, please i need help?

When i type in my correct password on the login screen and press enter it just goes to a blue screen for a few seconds then goes back to the same login screen again, please i need help?

You can take some of the steps here, #4, #5 or even trying a #18
Step by Step to fix your Mac
but I suspect your going to first have to create a data recovery drive
Create a data recovery, undelete boot drive
to get your data off the machine,
then do a #20 to eliminate the bad sectors as that's why your getting the "pinwheel" it's getting a delay reading from the drive, right when your trying to log in too, what a bad spot for it to happen.
Step by Step to fix your Mac

Is black screen for iPhone hardware or software problem

Is black screen for iPhone hardware or software problem.

Don't know until you troubleshoot. First step is a reset:
hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

When I try powering up my phone it stays on the logo screen for a few seconds then turn off, whats wrong with it?

When I try to power up my iphone 4 32g, it will stay on the apple screen for a few seconds then turn off. even when I try connecting it to my computer it turns on for a few seconds then turns off. Whats wrong with it? and what do I do about it?

Have you tried charging it with another known working USB sync cable? After letting it sit to "charge" for at least 30 minutes, have you tried resetting the device by pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear.
B-rock

Email not opening This is a sudden thing, Email had been working fine for two months then today would not stay open now it will not open at all. after trying to open mail I receive a white screen for a nano second and the app closes

Email not opening on my iPad2 This is a sudden thing, email had been working fine since purchasing the device then today would not stay open, now it will not open at all. After trying to open mail I receive a white screen for a nano second and the app closes.

Have you tried closing the Mail app completely ? From the home screen (i.e. not with Mail 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

YouTube loads black screen for first five seconds

Similar Messages

Maybe you are looking for