YouTube not working on 2012 MBA

So I just got my new MBA 13" today and when I try to watch anything on YouTube, I get this:
I've tried to watch the same video on both my 2010 iMac and Windows laptop, and it works on both of those machines.

Exactly the same problem with 2012 MBA. Youtube was working this morning (UK time approx 10 hrs ago), but has now stopped working and displaying the above error message. Multiple videos tried all show the same message.
The same youtube clips were tried on IPad, connected to the same network, and the clips played fine.

Similar Messages

Facetime works fine on my iphone, but will not work on my MBA.

Facetime works fine on my iphone, but will not work on my MBA. Keeps telling me "unable to verify address" and says it is sending me a verification link to my email address but I never get anything. Crazy.
After a while it tells then me that it cannot verify my email address because of a network connection ("Could not verify the email address. Please check your network connection and try again. ")
Does anyone have any ideas?

Facetime works fine on my iphone, but will not work on my MBA. Keeps telling me "unable to verify address" and says it is sending me a verification link to my email address but I never get anything. Crazy.
After a while it tells then me that it cannot verify my email address because of a network connection ("Could not verify the email address. Please check your network connection and try again. ")
Does anyone have any ideas?

What works in 2008R2 is not working in 2012 SP1

Setup:
Visual studio 2010 and 2012.
Database: both 2008R2 and 2012 SP1
Issue:
I have a CLR routine that does bulk update.
I have trigger on the tables that are being updated.
Using the same code and the same data, This bulk update query works in 2008, but does not work in 2012, WHEN there is more than one record to be updated.
My query is simply an update statement, updating table 1 from fields in table 2
I get no errors when I trace through it in Visual studio 2012, the data simply doesn't update.
However, if I run it in studio manager, I will get a range of errors, like, 'statement is terminated', or that there was an error in the trigger, or that it completed successfully, but the data does not update.
Disabling and re-enabling the trigger works, but that's not a good idea, and since I have many bulk update queries (and have been plagued with issues for the sites that have updated to 2012), I need a solution.
Any one run into this? Any ideas about what I can do?

Well, earlier you said:
sometimes I get 'the statement was terminated' (nothing else), or I get some error occurred in the trigger, or I get query completed, but the data did not update.
So there is some confusion about what exactly is occurring. But without code, there is nothing to do but speculate. Now you say that when there are multiple records that match the criteria it does not work. I assume that your context here
is the update statement - when it updates multiple rows the trigger does not have the desired effect. If that is not correct, it would help if you could clarify a specific (and hopefully simple) scenario for this case.
But based on this information, it seems that the trigger may have an assumption built into it that is not appropriate. A trigger does not execute for each row - it executes at the statement level and the virtual tables (inserted and deleted) can contain
any number of rows (from zero - yes, zero - to any number). Often developers do not realize that the logic must be written to handle a variety of rows; rather they assume that only 1 row is present. I would also suggest that perhaps a
similar assumption is made in the update statement you posted - but I don't know the relationship between the 2 tables (Invoice and Cust) so I could be wrong. Perhaps the update statement joins a customer to multiple invoices in some cases (rather than
an assumed 1 invoice per customer)? Perhaps there is some other oddity that is not evident from a distance.

YOUTUBE NOT WORKING ON NEW MACBOOK PRO

YOUTUBE NOT WORKING ON NEW MACBOOK PRO
Every time I want to see videos from youtube the video player just says "your browser does not currently recognize any of the video formats available".
Please help I have everything possible up to date.
Thanks!

It appears as if only some videos on YouTube will play using HTML5 and without Flash. For example, this video plays just fine for me and I do not have flash installed: http://www.youtube.com/watch?v=fxEWddT44BY
So, unfortunately, you will have to install flash or wait for YouTube to fix their website.
Also, one thing to try: When I had Flash installed and the "ClickToPlugin" Safari extension installed, YouTube would load all the movies in a simple HTML5 format. So no annotations or any other annoying stuff. Might be worth trying. You will have to install flash but, with the "ClickToPlugin" extension, you don't have to use Flash.

46tl963 YouTube not working

I bought 46TL963 week ago on toshiba places all apps work but YouTube not working, does anyone had this problem? If yes please help me with solution.
Thanks

If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 631-3811.
- Peter

Nokia n95 youtube not works

i upgrade new software v30.0.015 rm159 so far works fine but youtube not works its open login but not streaming vedio if vedio works but no sound.
and i go through google search and than youtube vedio its works fine
but nokia 95 youtube not work plz reply thanks

Here in New Zealand if you wanna watch youtube you have to be in a 3g area.

Voice Search In YouTube Not Working

I frequently use the voice search in YouTube when looking for video clips. I would say something and it wouldn't find exactly what I wanted because it found something similar in the history. I saw I had a lot of search results so I decided to clear it and I did.
I tried a simple search of "cute kittens playing" and it went through the motions of the microphone activating, showing pulses when I spoke, and when the chime for the end when the microphone turns gray, nothing was in the search results. I typed it in and I had search results. I tried another phrase and same result, nothing in search results.
I tried the Internet Browser and the voice search worked, and I tried the Chrome browser and it worked when I said, "OK Google".
I tried YouTube search and the voice feature doesn't work. I only cleared the YouTube history.
Any suggestions would be appreciated.

I followed the instructions from the link you provided. It did not work. I tried the second suggestion. YouTube does not have an Uninstall button, but it has an Uninstall Updates button. I chose that option. It worked and Voice Search worked great. However, after I installed the latest update, the Voice Search did not work again. I have two phones and I find it strange that it affects one phone and not the other, yet it's the same model phone, the Galaxy S4. One is Black Mist and the other is White Frost. Voice Search works fine on the White Frost phone with the latest version of YouTube, but not the Black Mist phone.
Here are the YouTube versions on both phones:
Black Mist ---> 5.1.10 - updates uninstalled
White Frost ---> 5.5.27
Thank you for your help, but I hope the next update of YouTube will fix this problem.

Multicast not working SCCM 2012 SP1

Hi,
Am having issues getting multicast working with SCCM 2012 SP1 / Server 2008 R2.
We have followed all the guidelines in this forum but still no joy
- Multicast setting enabled on DP
- Multicast Enabled on OS Image
- Task Sequence set to down content when needed
- SCCM DP and Client are on same VLAN to rule out routing issues
- Network team confirm all ok there end anyway
- Boot images / WDS and PXE are all healthy
The PC Boots via PXE ok and runs our windows 7 task sequence, when the task sequence starts it says "Opening multicast session" for about 5 seconds and then disappears. Its as though it tries but then fails. Unicast works fine.
I then set the OS image to "Only use Multicast" which produces the following error in the client SMSTS.log
reply has no message header marker
Failed to open session request (Code 0x80004005)
ApplyOperatingSystem 28/01/2014 12:53:25
1944 (0x0798)
ClientRequestToMCS::DoRequest failed. error = (0x80004005).
ApplyOperatingSystem 28/01/2014 12:53:25
1944 (0x0798)
Request to MCS 'SererName' failed with error (Code 0x80004005).
ApplyOperatingSystem 28/01/2014 12:53:25
1944 (0x0798)
Multicast OpenSessionRequest failed (0x80004005).
ApplyOperatingSystem 28/01/2014 12:53:25
1944 (0x0798)
Sending status message: SMS_OSDeployment_PackageDownloadMulticastStatusFail
ApplyOperatingSystem 28/01/2014 12:53:25
1944 (0x0798)
Any idea on how we get this working ?
Thanks

The logs related to multicast that you'll see on the site server are:
mcsisapi.log
Records information for multicast package transfer and client request responses.
Site system server
mcsprv.log
Records multicast provider interaction with Windows Deployment Services (WDS).
Site system server
MCSSetup.log
Records details about multicast server role installation.
Site system server
MCSMSI.log
Records details about multicast server role installation.
Site system server
Mcsperf.log
Records details about multicast performance counter updates.
Site system server
http://technet.microsoft.com/en-us/library/hh427342.aspx
>> Network team confirm all ok there
end anyway
This is something to double and triple check. If Multicast is not enabled on the routers/switches properly, this will not work. If there is a firewall between the client and the distribution point that doesn't have the Multicast ports open, this
will not work.
Client -- > Distribution Point Configured for Multicast
Description
UDP
TCP
Server Message Block (SMB)
445
Multicast Protocol
63000-64000
http://technet.microsoft.com/en-us/library/hh427328.aspx
I hope that helps,
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you've found a bug or want the product worked differently,
share your feedback.
<-- If this post was helpful, please click "Vote as Helpful".

Mac OS X - deep links in youtube not working, fast forward not working

Specs: Mac mini 1.66 Intel Core Duo, OS 10.6.8 Snow Leopard, Flash 11.1.102.64
Adding, for example #t1m30s, to the end of a youtube url does nothing, videos always start at the beginning. Yes this is an older computer but deep linked youtube videos work fine in Firefox but not Safari. I have another Mac Mini slightly newer, a Mac mini 1.83 Intel Core 2 Duo with same software specs and deep links work fine on it.
Also I can't seem to drag the marker anymore. Very frustrating.

While you might get an answer from someone here (I'm interested in knowing too, I run into the drag problem from time to time) I think you'll have better luck over on YouTube's forums.
Chris

Brand new MacBook Pro & Youtube: Not working together

I just bought this new MBP and whenever I go to watch a Youtube video, it encounters some serious difficulties. The videos load up to just a few seconds in and stop. If I drag the slider to any point in the video, it will play from that point, but only for a few seconds before locking up again a few second again.
I ran a software update, I've tried goofing around with some settings, and I have reinstalled flash. Does anyone have any ideas? It would be much appreciated.

GM1977 wrote:
hello, I used the webcam just to try it few times and now it is not working anymore. photo booth, skype etc... no way to see the camera working again.
the macbook is 10 days old!!!
Any idea/solutin ?
thanks
(1) Be certain that all third-party software you have added is compatible with OS X 10.6.2. Uninstall any that cannot be updated for compatibility and test to see if your problem remains.
(2) If you do not have a third-party software problem, consider all relevant suggestions from
http://support.apple.com/kb/HT2090
If your iSight problem occurs in more than one app and more than one user account, the reset suggested there often restores proper function of inbuilt iSight.
However, if after carefully following all the suggestions in the "How to Troubleshoot iSight" article, your built-in iSight still does not work, contact your retailer for help with your new Mac.
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

MDX queries that used to work on SSAS 2008 not working on 2012

Hello,
We are still using the old PerformancePoint planning server which is writing MDX queries against a SSAS 2012 at this time.   What used to work against SSAS 2008 is now having issues.   I captured a profile and the part of the query which
generates the error is this error: The '' calculated member cannot be created because a calculated member with the same name already exists.    What has changed in SSAS 2012 where this would not work anymore?; is there anyway to
make the 2012 environment work with this code again?.   The code generation is out of my control so I need to find a way to enable backwards compatibility with the way the tool generates the MDX statements.
WITH
MEMBER [Account].[Staffing_V3].[] AS ""
MEMBER [Account].[Staffing_V3].[] AS ""
MEMBER [Account].[Staffing_V3].[] AS ""
MEMBER [Account].[Staffing_V3].[] AS ""
MEMBER [Account].[Staffing_V3].[] AS ""
MEMBER [Account].[Staffing_V3].[] AS ""
MEMBER [Account].[Staffing_V3].[] AS ""
MEMBER [Account].[Staffing_V3].[] AS ""
MEMBER [Account].[Staffing_V3].[] AS ""
MEMBER [Account].[Staffing_V3].[] AS ""
MEMBER [Account].[Staffing_V3].[] AS ""
MEMBER [Account].[Staffing_V3].[] AS ""
MEMBER [Account].[Staffing_V3].[] AS ""
MEMBER [Account].[Staffing_V3].[] AS ""
Thanks,
Matt

Hi Matt,
According to your description, the MDX query which has the duplicate calculated member name can run success with out any problems in SSAS 2008, however the same query cannot work in SSAS2012 with the error below, right?
The '' calculated member cannot be created because a calculated member with the same name already exists.
I have tested it on my local environment, and the result turn out that this is the default change by Microsoft from SSAS 2008 R2 version. And I am afraid there is no any workarounds run this similar query in SSAS 2012. So in your scenario, you
need to remove the duplicate members in the query.
Thank you for your understanding.
Regards,
Charlie Liao
TechNet Community Support

YouTube not working on iPad 2

Greetings - YouTube no longer works on my iPad2. Not in the YouTube app, not in safari on YouTube, not on embedded YouTube clips on other sites. I have already tried hard reset (several times). I have closed inactive apps, including YouTube. Message I get is "cannot connect to YouTube). I have tried logging into my YouTube account first. My wireless connection works fine and ipad is connected and operating fine otherwise (I am online as I type this). The only thing I can guess is that it has something to do with my IP address? Maybe an ios5 thing? Has not worked for 2 months. Help!!

I have not tried it outside of my house. I don't have 3G connnected to iPad yet, though it is capable of going with 3G. I have tried other video on the iPad, such as video delivered via Vimeo. No problmes with Vimeo video.
The wifi Network is my home network. It delivers YouTube just fine to the 3 iphones in the house, 1 iMac, MacBook Pro and MacBook Air. It just won't work on iPad 2. No idea why.

YouTube not working in Safari and Firefox (OSX 10.8)

Just bought a new 13" MacBook Pro (4 days old) that came with 10.8 installed. YouTube is not working and I keep getting this message in Firefox:
"The page isn't redirecting properly:
Firefox has detected that the server is redirecting the request for this address in a way that will never complete.
This problem can sometimes be caused by disabling or refusing to accept cookies."
Pretty much the same message in Safari. Made sure all setting are correct (cookies etc) cleared history and all that stuff. All other Flash based content plays without a problem, it's just YouTube.

Mountain Lion is kind of ******. At this moment all Flash content is not working in both Firefox and Safari. Reinstalled Flash Player and still nothing. It's playing no problem on my 5 year old MacBook with Snow Leopard.
Is anyone else having these problems?

Setting NTFS Folder ACLs via GPO not working on 2012 R2

I have configured some NTFS folder persmissions using a GPO in
Computer configuration/Windows Settings/Security Settings/File System/
Configure this file or folder then: Propagate inheritable permissions to all subfolders and files
This works great on all my Server 2008R2 boxes. But it has no effect on my 2012R2 boxes!
gpresult /z indicates that the policy is read and applied.
Why doesn't this work for 2012 R2 servers?
Many thanks.

> This works great on all my Server 2008R2 boxes. But it has no effect on
> my 2012R2 boxes!
check %windir%\security\logs\winlogon.log - that's where file system
permissions are logged.
In addition, it might be that SYSTEM hasn't full access to the folder
you want to modify?
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

OS 10.3.9 Safari v1.3.2, Youtube not working, Need new Adobe Flash player

Youtube stopped working over the weekend. Instead of seeing videos I see the text "Hello, you either have JavaScript turned off or an old version of Adobe's Flash Player. Get the latest Flash player." I clicked on the link and downloaded the latest version and it still doesn't work. I verified that javascript is, in fact, turned on so I know that's not the problem. Looking at my installed plugins the version that was installed is "Shockwave Flash 9.0 r115".
Reading other forums, is there a problem with this latest version of Shockwave Flash? Can anyone please help???

Adobe FlashPlayer should first be uninstalled using the appropriate uninstaller available here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157&sliceId=2 and then the latest version obtained from here: http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash and installed.
(You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS)
Some users have mentioned that the latest Flash Player (v.9.0.115.0) conflicts with Leopard, and that they have needed to revert to v. 9.0.47. This can be downloaded from here:
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14266&sliceId=1
This might be wroth a try in your case, even if are on Panther.

YouTube not working on 2012 MBA

Similar Messages

Maybe you are looking for