YouTube on TV - Device not supported error-Firefox Windows 7/8.1

On Windows 7 and 8.1 Chrome and Internet Explorer opens https://www.youtube.com/tv without issue. Using Firefox i get an error stating that YouTube on TV is not supported by this device.
Any ideas?
Thanks

This looks like a problem with some Firefox releases.
The site works with the current 34 Beta and the current Nightly 36 build, but not in the Firefox 33 release and in the current Aurora 35 build.
I don't know what goes wrong as there are no error messages in the browser console and the HTTP request/response headers also do not seem to be given a clue.

Similar Messages

Ipod touch won't sync - device not recognized error in windows 7

my daughter's ipod touch will no longer sync to our windows 7 computer. i am having a similar issue with my iphone 3gs. i have tried reinstalling the driver many times but no help.

I would start here:
http://support.apple.com/kb/TS1495
Also the related articles on the left of that page may also help.
If you still need help please provide more information such as what "driver" are you talking about and specifically what you attempted.

Error 7 (windows error 126). Have tried to re-install itunes but failed, twice. some end message about "mobile device not supported".

Error 7 (Windows error 126). I have tried to re-install itunes twice now, and each time " mobile device not supported" appears and the installation can not finish.

See Troubleshooting issues with iTunes for Windows updates.
Do you have any iOS devices? If the link above doesn't completely fix your library I could talk you through installing iTunes without Apple Moble Device Support for now which would at least enable you to open iTunes.
tt2

HP Device Not Found Error when trying to print or scan wireless- HP Officejet Pro L7590

Have had HP Officejet Pro L7590 All-In-One Printer for years. Always worked fine and I had no issues printing via wireless connection. Several months ago.. Possibly after a Windows 8 update. From Windows 8 to Windows 8.1 I have not been able to use the printers wireless feature. When I try to print or scan it shows the printer as offline. Also get an error message that tells me "HP Imaging device is not found". I can still print when connected to USB. Cannot scan or use features of the HP software suite. I have tried several times to correct. Reloading the software and drivers several times, but no success. I just tried again and was able to print the test page wireless, so got all excited and thought I fixed it. Then tried to print something and got the same error message I have seen in the past. I have talked to certain supports saying that it may be a firewall setting within Windows. Any other suggestions? Thanks

Hi @rfjones002,
Welcome to the HP Support Forums! I see you are not able to print or scan wirelessly to your HP Officejet L7590 and your computer running the Windows 8.1 Operating system. You get a 'Printer offline' or 'HP Imaging device not found' errors.
I would like you to start with the steps listed below:
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
Uninstall the software again - Uninstall the Printer Software Instructions
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /unregister
and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /regserver
and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayerflashplayer/downloads.html
Perform a clean boot > How to perform a clean boot in Windows
Download the following SP40669 File Download - if this does not download and or install please proceed to the next step.
Turn off the Real-Time Scanning and Firewalls; The image below is a McAfee example, if you have a different antivirus program and need help disabling Real-Time Scanning and Firewalls let me know.
- Image source
Now you can go ahead and download and install the software here >
HP Officejet Pro Full Feature Software and Driver
If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if this was successful! I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Burning- "Device Not supported..." Using LaCie & Toast 7

HEy all,
I am getting the message, "Device Not Supported...." with option to cancel when trying to burn to a LaCie. I'm on a FPimac with DVD Stud 3. I have Toast 7 but trying to burn directly from Pro.
Any work arounds...
THanks,
Al

A snag as I only have Toast Lite - a stripped down version ...and will only let me burn two items or folders ....
There was only 1 Lay file.
It won't let me choose the option you mentioned UPG?
But it did let me choose "DVD-Video" however I got an error after pressing burn - "error -39"
Other than upgrading my Toast Lite to Toast can't I use my Full Toast Version on my MBpro to burn a DVD authored in DVDPro via my network?
THanks,
Al
Message was edited by: UCanCallMeAl

Smart wi-fi browser not supported error by Linksys

Linksys seems to have created a doozy of an issue with this "browser not supported error" they keep displaying. Its as if head office is oblivious to this.
I am running IE 11 with all the updates applied and it gives the error. I downloaded firefox and it gives the same error. I downloaded Maxthon cloud browser most recent version and it does not work except when you log in with your cloud browser ID.
I have the latest version of Java 51 and cookies are enabled.
The strange thing about the Maxthon experience was when I logged out it continued to work. but when I went to another page and came back it stopped working.
There is something screwy in the linksys firmware here. they should have a bypass for this not so smart thing. Its really not worth the aggravation. Can anyone pinpoint where the issue is with this thing please?

Have you tried this?
-start with a turned off/powered down router
-turn on your PC and clear your browser cache with the router OFF
-prior to powering up the router... remove the WAN internet cable connecting the router to the cable modem or DSL unit.
-power on the router
-navigate to the correct ip address (probably 192.168.1.1 if there were no other routers in your network)
-now attempt to log in using the ACCESS ROUTER panel
-from now on it- local login should display as the main log in window with the smart wifi option in a panel below instead of the reverse which was the factory default.
-reconnect your wan cable and use as always.
-now the expectation is that you will always be able to log in through the ACCESS ROUTER panel locally.
Let me know if it works for you.

Device not recognized error

When I try to connect my Ipad1 to PC, I get the "device not recognized error". I tried to connect the Ipad to my Macbook Pro, I get no reaction, the computer does not see the Ipad, does not give a message either.
I re-tried with different cables, different PC's, latest version of itunes etc.
I can charge the Ipad through the wall outlet, no problem for that.
Do you think it is a hardware problem with the USB interface of the Ipad, or a software issue? If so, what can I do to solve this?
Thank you

Here's some relevant information:
http://support.apple.com/kb/ts1591

Boot Device Not Found Error Message

I've had my laptop since May 2011. HP Pavilion dv6
Quad-Core AMD Phenom II 2.2 GHz
DDR3 SDRAM 8 GB
500 GB Serial ATA 7200 rpm hard drive.Originally Windows 7 64-bit upgraded to Windows 10 64-bit One morning I turned on my laptop and I received the following error. The laptop lives on my desk, hasn't undergone any major changes, and I haven't moved or dropped it. I've run every diagnostic test from the F2 menu. The hard drive and memory both passed, the system tune up passed, and I've restored the BIOS to the default settings with no changes. If I hold the power button and restart the laptop usually on the 2nd or 3rd attempt the system will start normally with no issues and continue on as if nothing is wrong. This is a helpful work around but it doesn't solve the problem which is a bit of an annoyance and leaves me worried that eventually it might refuse to start at all. Thinking that a system restore might help I ran a recovery and brought it to an "out of the box" state. After that failed I decided to go ahead and upgrade from Windows 7 to Windows 10. I performed a clean install keeping none of my programs or personal files. Despite a successful Windows 10 install I still receive the same error every time I restart. The short version:When I turn on my laptop I encounter a Boot Device Not Found Error Message.My hard drive passes diagnostic tests.My laptop will start eventually if I continue to power cycle it.

@pkharel ,
Hello and thank you for posting on the HP support forums. So that I can better help you here with this hard drive issue . Can you explain what diagnostic you ran on the hard drive.
Did you run the diagnostics from the BIOS?
HP Notebook PCs - System Diagnostics (F2)
HP PC Hardware Diagnostics
If you have attempted the diagnostics from the BIOS and are not finding the Hard drive. See if you can find the hard drive in another computer. If you can not find it using another computer replace the drive. If you can and it is not located on your notebook then you have a possible issue with the motherboard.
First thing I would do is try and restore your BIOS first.
Restoring the BIOS
After attempting this and you still can not find the Hard drive and you can see it in another system please contact HP phone support for repair options.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
If the hard drive is not detected in another system then replace hard drive.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

I tried updating to itunes 10.5 and now when i try to open itunes i get a message saying "Apple application support was not found" error 2 (windows error 2)

Ok so I went to update my itunes 9 to itunes 10.5 and now I get and error message "Apple application support was not found" error 2 (windows error 2) when ever I try to run itunes and iv been trying to fix this for like a month and let me tell you iTunes for windows is **** and I really want Icloud for my iphone 4 and yes iv tried uninstalling everything by apple in the correct order and reinstalling them after restart atleast honestly 20 - 30 times but nothing worked so if anyone can please help me I have windows 7 and a hp intel pentium computer

Install 7-Zip (free), or a free trial of WinRAR, and use one of them to extract the contents of the iTunesSetup.exe or iTunesSetup64.exe installer file, then try installing AppleApplicationSupport.msi as a standalone component. Even if it won't install you may get a more useful error message as to why not.
tt2

Datatype : 25 not supported error while saving Logical Query in BIP Dataset

Hi All,
I have created a nested logical Query in OBIEE Publisher Datamodel using parameters.
Here is the simple query :
Select name, revenue, date from
select "SubjectAreaName"."TableName"."Name" name,
case when :Date > date '2012-01-01' then "SubjectAreaName"."TableName"."Revenue" else NULL end Revenue,
date date
from
"SubjectAreaName"
where
date = :Date
) T1
Note - :Date is the parameter. When I try saving this dataset as-is, it throws me Datatype : 25 not supported error. But, when i replace the parameter :Date with actual date, then the query works. Also, the inner query works with or without parameters. The issue arises when I use the outer query and the parameters.
Please let me know if you have come across such a problem ?
Any help on this regard would be highly appreciated.
Thanks
Swarna

ya i can understand we wont do the sql logic at the data model part as some time performance issue may come when comparaed to sql run in package and sql running in data model . so i have mostly done using package and i will just do select * from table in the data set of data model so i didn't face any issue's like this .
once check this tutorial may be you already
i use to create parameters like this i didn't face any issue
SELECT * from TEST where ID=:p_id
http://st-curriculum.oracle.com/obe/fmw/bi/bip/bip11g/gettingstarted/gettingstarted.htm

"USB Device Not Recognized" error when I connect iPod to my PC

I have a brand new 5th gen (I think) iPod.
I have been able to connect it successfully to my home laptop, download music to it and play it so I know the iPod works per se and the cable is ok too.
Now at work (where tons of my music is) when I connect it to my PC here and I get a "USB Device Not Recognized" error pops up from my taskbar. When I click on the message it pops up a "USB Device Not Recognized" window which displays a list of USB ports, and shows "Unknown Device" for the one where the iPod is connected.
I think its probably USB1.something as opposed to USB2.0 but from what I understand that shouldn't matter.
Can anyone suggest anything ?
I've tried the 5R's as far as I can, and I read through this thread:
http://discussions.apple.com/thread.jspa?threadID=500559&tstart=15
but there didn't seem to be anything conclusive.
Thanks for any help,
Jill

First make sure the latest iTUnes is installed on this work PC, IF your allowed to install things on it, the latest iTunes version is 6.0.4.2 and can be downloaded from the apple site (Hit iPod+iTunes tab at the very top of this web page)
Another thing is what version of windows is the work PC? Is it windows XP Windows 2000 Or windows Me 98? iTunes will only run on XP and 2000

CS4 install problem "you cannot run...architecture not supported" error

Just received my copy of CS4 (Mac) from amazon.com. Installed it. But could not get it to run. Got a "You cannot run....architecture not supported" error message. Can't understand why? This is my first version of Photoshop CS. Didn't install CS3...etc. Nor did I previously install the "master" edition. And I am running a MBP 2.5GHz laptop. So it has to be software related. A corrupt file perhaps?
I also cannot install Adobe AIR. Suddenly 3 windows pop up. Telling me I can't install AIR.
Not happy. Expensive software not running. Not good. :P What gives???
Please help me soon!

Where were you yesterday Buko?? :) Where would one find the "CS4 Cleanscript" any how? Would have been nice if you provided a link. Heh...
Any how. Last night. I did d/l the trial version of CS4 Extended. Installed it. Then read the READ.ME file. Stresses that you MUST use their uninstall program. That you can't simply drag the folder to the TRASH (or use AppDelete or AppZapper...as you would be doing the same thing pretty much). So, I used Adobe's CS4 uninstaller. Did a very thorough job of removing the right files.
I managed to sucessfully install my copy of CS4. I even got the proper SETUP dialogue box this time (6 tabs). Previously only 3 tabs were visible. This one asks you to input your serial # and even register before you finish.
Now I see the blue PS folder icon. Have copied a few PS program icons to my dock. Working now as it should.
Moral of the story? Read the READ.ME file!! And use proprietary uninstall programs for huge complicated programs like PS CS4. :) Later guys.

AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.

AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.
Has anybody come across this error and found a fool-proof solution? I have found some stuff on the web but nothing seems to work. In particular this one on the Apple Help doesn't:
http://support.apple.com/kb/HT4700
I have a W2K3 server where the volume is. It's a new Mac with OSX 10.8 and is connecting with AFP (I don’t want to move to SMB yet). There are older Macs with lower OS and all of them work fine. I have checked all the basic stuff and it is set-up correctly (hosts file on Mac, network, etc.).
Any help greatly appreciated,
Cheers,
Ian

This may work for you:
http://www.zdnet.com/mavericks-smb2-problem-and-fixes-7000022519/

How can I get my stereo to play music videos from my Ipod Nano? It comes up with the message "This device not supported". Strangely my Iphone IS recognised. The stereo, Ipod, and Iphone are less than 4 months old. Any suggestions welcome!

How do I get my Ipod to play music videos through my theatre system? I keep getting the message "This device not supported". My theatre system WILL recognise my Iphone however. The theatre system, Ipod, and Iphone are all less than 4 months old. Any suggestions welcome!

Check with the theater system vendor and see if their system is compatible with the Nano. The resolution on the Nano may be too low for the system.

BPM_DATA_COLLECTION fails with (Output device "" not known) error

Hi all,
I have an issue with Output BPM_DATA_COLLECTION_1 job in the satellite system failing with 'Output device "" not known error. Since it is collecting data for Solution Manager system why does is it trying to find an output device.
It did not fail before and now I added another key figure (custom one) which is done the same way the other custom monitors are done in "Z_BPM_ECU_COLLECTOR" report and then in /SSA/EXM program, but the collector job started to fail.
Also, for some reason there are two BPM_DATA_COLLECTION jobs, one is BPM_DATA_COLLECTION_1 and the other is BPM_DATA_COLLECTION_2. _1 runs every 5 min and _2 is less frequent. They both seem to runt the same job which is /SSA/EXS. Why are there two jobs scheduled from solution manager in my satellite system?
Thank you very much for your help!

I am experiencing this same issue in our ECC 6.0 system. We currently have ST-A/PI release 01M_ECC600 level 0001 applied to our system. These jobs finish successfully in SM37, but I'm seeing the same error messages in our system logs (SM21).
When I try to update the output device that is associated with these jobs, the user ID running the jobs is not valid since it's user type is Communication Data.
Does anyone know if it ok to change the user for this job? Should it be run by DDIC? I believe the jobs were created automatically when we applied ST-A/PI release 01M_ECC600 level 0001.

YouTube on TV - Device not supported error-Firefox Windows 7/8.1

Similar Messages

Maybe you are looking for