Youtube problem after flash update - again?

Folks,
I have FF 27.0 and have just been "stung" with this new FLASH addon.
I can't play youtube movies.
I have tried the "TRUST" sites but that was to get FOX TAB working.
Do I need to do youtube........?
I did try "Request policy" as an "anti-tracking" but it caused more trouble than I liked, so I disabled it.
But about that time I updated the FLASH player. Silly me.
So I am stuck with how to get youtube working?
I tried downloading Real Player, but that isn't a PLAYER in firefox - that I can resolve.
All the other posts on this topic are from last year, so as much as they may be "valid", I don't see how they are applicable to THIS case.
Thanks in advance.

Thanks to you both.
Couple of things which I thought were "understood":
UNTIL the flash update FF and youtube worked fine.
AFTER the update they didn't.
There have been posts like this in the past but as I said, that wasn't for THIS flash update.
(Ok just on closing: I ticked the NEEDS MORE INFORMATION below. Don't know why, but I guess I need more information. What is it really for?)

Similar Messages

  • Firefox and Adobe problems after Flash update last night

    OK, this is a non-Apple question, but I haven't found any solution yet.
    Everyone knows that to run the "Adobe Acrobat NPAPI Plug-in, Version 10.1.3" in Firefox, you had to open in 32-bit mode. I did and that plug-in, plus the "Adobe Acrobat Create PDF 1.2" extension worked just fine running Firefox 12. Tonight I got notification that I needed to update Adobe Flash Player. I did (quitting and restarting Firefox after the installation).
    THEN up popped a warning - Firefox suggesting that I disable the NPAPI plug-in and finding out here that Firefox was disabling the plug-in. So I disabled it, restarted, etc. Then I found that the Create PDF plug-in would crash if I tried to save a web page as PDF within Firefox.
    Is there any way to go BACK to the older Flash plug-in? That seems to be at the root of my problem. I can use PDF Browser plug-in in Firefox to display PDF files but what I really need is the Create PDF extension back (it's strangely absent from Safari - at least I've not been able to find it).
    Any help out there?
    Thanks,
    Clinton

    clintonfrombirmingham wrote:
    petermac87 wrote:
    clintonfrombirmingham wrote:
    but what I really need is the Create PDF extension back (it's strangely absent from Safari - at least I've not been able to find it).
    Create PDF or save as PDF?
    Pete
    Pete,
    I can always use the PDF creator "Save as Adobe PDF" that is available from the Print menu and added by Acrobat Pro X, but it does not always save the hyperlinks correctly, etc., where the Adobe Create PDF does a fantastic job... I'd just like to have it back. It does not show up in the Safari extensions/add-ons for some reason.
    Thanks for getting back so quickly!
    Clinton
    Then you may well have to go to the Mozilla Forums on this one. As I say, I steer clear of Firefox because of all it's bulky extentions.
    Good Luck
    Pete

  • Multiple Samsung Stratosphere problems after FF1 update

    There have been multiple posts on various issues users have found after the recent Stratopshere FF1 update.  Some were replys to older posts and some only touched on a single issue.  I wanted to consolodate into one thread, and hopefully get teh attention of Verizon to maybe reply here.
    For reference, a lot has been discuss here --> https://community.verizonwireless.com/message/874446
    Summary:  Verizon and Samsung have finally updated the Stratosphere almost 1 year after release.  This updated the phone from Android 2.3.5 to Android 2.3.6.  Going by filename, this is known as the FF1 update.   This update went live at the end of August 2012, and most users were upgraded before mid September 2012.
    There were some noticable changes in this update:
    -Lock screen has changed.  The puzzle piece and glass lock options have been removed.  New options have been added, such as facial recognition unlock.
    -Call answering screen has changed, introducing the option to ignore call with a message.
    -Camera now has digital zoom ability.
    -Ability to uninstall the 2 games the phone comes with (Need for Speed and Lets Golf)
    -Phone icon has changed ever so slightly
    -Wifi icon now included up and down arrows to indicate data is being sent or recieved
    -Wallpaper no longer "stretches" over multiple screens - ie, it no longer scrolls as you move from screen to screen
    -The visual voicemail app has been improved (I have personally not used this feature)
    -Callback number is now supported in text / picture messages
    -Android core OS updated from 2.3.5 to 2.3.6 (both versions are still Gingerbread)
    -Update to how the device deals with the end of scrolling.  It used to rubber-band bounce back, now it will just give a green bar and expand the bar as you scroll.  (I cannot fault Samsung for this change as this was at teh core of an Apple lawsuit and has been changed in newer versions of Android.)
    -(I am sure there are more.  please list any others you may have noticed)
    I have found some problems, and others have confirmed that this is (at least) somewhat widespread:
    -The biggest problem is with wifi connectivity.  Upon an initial connection to wifi, everything works great.  After somewhere between 15minutes and 2 hours, problems start happening.  Its as if the wifi keeps hanging or reconnecting.  Download speeds (tested with the SpeedTest.com app) slow to about one third of normal.  Apps like Facebook that require a constant connection will just time out.
    -It appears the signal strength for 3g and 4g connections is lower.  There are places where I used to get a 4g connection, and now I only get 3g.  Some palces I fall back to just 2g digital.
    Another minor issue i found was with text messages.  When you reply to a message, it no longer automatically focuses the text in the input box.  You have to first click into the box to start typing.  Not a huge deal, but one more step to take over and over.  Minor annoyence.
    At my house, I struggle to get a 3g or 4g signal.  I depend on wifi for my data connection.  So with the wifi connection problem introduced by teh FF1 update, my phone is somewhat useless to me now while at home.  Here are teh troubleshooting steps I have been through so far to attempt to fix the wifi problem:
    -Complete factory reset on my phone.  (did not help)
    -Pull battery and SIM card out of phone for 15 minutes.  (did not help)
    -Went to a Verizon store.  The guy at the store was helpful, and said he also had a Stratosphere and was getting the same wifi problems after the update.  He said all he could do was to send me out a replacement phone. I got the replacement phone, and it had the same problems.
    -I read in multiple palces that Android 2.3.6 has a bug within wifi and DHCP.  Apparently if you have a DHCP lease set to "forever", the phone will keep requesting a new address.  Setting the DHCP server on the router to something like 2 weeks, or using a static IP is supposed to solve this.  I have a NetGear N900 router, and I can not change teh DHCP lease time.  It appears, however, that my router is not sending out "forever" leases.  But just to make sure, I gave my phone a static IP.  (None of these steps made any difference).
    The only thing that temporarily fixes the problem is a reboot of the phone.  This will again give you anywhere from 15min to 2 hours of good wifi use before problems start happening.
    I have now had this update for over a week, and on 2 phones.  I still can't maintain a wifi connection for much longer than 15 minutes without problems starting up.
    I am asking Verizon or Samsung to at least confirm this issue if possible.  Maybe there are newer revs of the Stratopshere hardware that don't have this problem.  Or there is something unique about my (and apparently others) situation.  But it seems like Verizon's current stance is to offer a repalcement phone (as currently all Stratospheres are within their 1 year manufacture warranty as the phone has not been ouy for quite 1 year yet).
    I am asking for a workaround for this problem, or a true fix adressed by a new software update, or at least allow us to roll back to the original Andorid 2.3.5 software.
    I have had my original Stratosphere for almost a year with no wifi problems - then get the FF1 update and have had nothing but problems on 2 different phones.
    Thank you for your time.

    Thanks for starting a comprehensive thread on problems with this update. I want to add one more.
    I have Bluetooth in my car (a 2004 model), and previously the phone has connected to it practically instantly when I start the car. Since the update, I have never been able to connect the phone to the car by Bluetooth. Several times the phone has made a standard notification sound at the moment it should be connecting to Bluetooth, though no notification appears. I have no idea what that could mean.The car's Bluetooth shows up as paired in the list of devices in Settings > Wireless & networks > Bluetooth settings. I haven't seen this widely reported as an update issue, but perhaps some others have experienced it too.
    UPDATE: I finally did some testing, and found that the notification was to signal the extremely brief appearance of a dialog indicating that the car's Bluetooth was requesting a connection. Accepting that request let the phone connect with the car, and calls went to the car's sound system as they should. When I turned the car off and back on (just the electrical system; not wasting any gas on this!), the connection was established immediately, so apparently the acceptance only had to be done once. Nevertheless, it did have to be done, and the dialog notification disappears within seconds. I believe it would have been possible to go into Bluetooth settings and accept the connection request there if I missed the notification; but not seeing the notification, I might not know to do this.
    One further observation: When I turned the phone's Bluetooth off and back on after a connection had been established, leaving the car on the whole time, the two did not reconnect. I believe that may be different from before the update, but I'm not really sure.
    Message was updated by David Rensberger

  • EFI Problems after last update anyway to downgrade ??

    Hello
    EFI Problems after last update anyway to downgrade ??
    i have updated my MacBook 2010 EFI to MB71.0039.B0E which is 2.1 version
    after updating to this version the Boot time become much slower when i want to change boot partition
    and shutdown become very much slower and startup too
    i tried to install Mac OS X Lion again but it doesnt help
    can i downgrade to this version 2.0 ???
    or when Apple will release the new version ?
    or where can i send a feedback regarding this issues !!!!
    Thanks

    These are user to user forums. If anyone knows the answer, they will give it.
    You can always call Apple support which may charge a fee or you can patiently wait for an answer here, which is free.

  • Please Read This To Reduce or Eliminate Problems after Software Update

    Hi all, I have been reading quite a handful of Mac users here reporting problems ranging from minor ones like slow downs to major ones like application crashes, and many of them blame the new OS and/or Security Updates.
    Without learning more from the details of how did they perform their Software Updates and Install, I am making a huge assumption that it maybe something they did or didn't do, one of the key things they did not do is Repair Disk Permission
    Below is what I called, the "ritual procedure" needed to perform before and after a Software Update, and also any other major software installation - to help reduce or eliminate "hiccups" afterwards, I cannot gaurantee that all macs all over the world will not suffer any problems after an update, but by doing so, you may help reduce it; I have 4 macs all together and so far I have not encounter any major problems after many versions updates.
    Anyway, I didn't come out with this series of procedures, I read it off somewhere in this Discussion quite a while ago, and thought I share it again with all of you:
    1.Before starting Software Update, unplug all external devices, FireWire, USB, hubs etc etc, not just turning them off but unplug the cables off your Mac, leave only your keyboard, mouse and internet connection on (unless you are using a wireless keyboard and/or mouse or on wireless internet)
    2.Repair Disk Permission
    3.Restart the Mac, then start your SU, do not run any other apps.
    4.After finishing SU, restart your mac; If you are updating OS or Security Updates, Restart is required.
    5.Repair Disk Permission again
    6.Shutdown and re-plug in everything and start up your mac as normal.
    I know the procedure is pretty long and "troublesome", especially the unplugging and restarting part, but so far it really has done my macs good, so I am going to "swear" by it... my FireWire, USB devices etc still work as normal.
    This is really contrary to that "Macs are easy to use", yes, no doubt about it, but the software updates etc is just well, put it this way: The Mac OS when it comes to updates, is very very delicate... so handle with it great care, it will just turn out okay.
    Cheers

    Thank you for posting that. I posted a similar set of suggestions here:
    http://www.macmaps.com/backup.html
    Disclaimer: Reference to links I make to my Macmaps.com website are a for your information only type reference. I do not get any profit from this page, and it is open to the public.

  • Share and save problem after latest update

    hello,
    i have share and save problem after latest update - i have installed ps touch on nexus 5 about 2 months ago and until yesterday everything was good but after latest update i can't save and share images in ps touch ( i do reinstall this app  but problem is still  and app doesn't work properly   ) how  can i downgrade to the old version ? Could you fix this problem quickly ?

    i use app which called "aLogcat"
    --------- beginning of /dev/log/main
    I/dalvikvm(24476): Enabling JNI app bug workarounds for target SDK version 11...
    D/dalvikvm(24476): GC_CONCURRENT freed 174K, 2% free 17054K/17264K, paused 2ms+2ms, total 15ms
    W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
    W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
    W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
    --------- beginning of /dev/log/system
    W/ViewRootImpl(24476): Dropping event due to root view being removed: MotionEvent { action=ACTION_MOVE, id[0]=0, x[0]=38.0, y[0]=-115.0, toolType[0]=TOOL_TYPE_FINGER, buttonState=0, metaState=0, flags=0x0, edgeFlags=0x0, pointerCount=1, historySize=2, eventTime=27743080, downTime=27743066, deviceId=4, source=0x1002 }
    W/ViewRootImpl(24476): Dropping event due to root view being removed: MotionEvent { action=ACTION_UP, id[0]=0, x[0]=38.0, y[0]=-115.0, toolType[0]=TOOL_TYPE_FINGER, buttonState=0, metaState=0, flags=0x0, edgeFlags=0x0, pointerCount=1, historySize=0, eventTime=27743086, downTime=27743066, deviceId=4, source=0x1002 }
    D/dalvikvm(24476): GC_FOR_ALLOC freed 122K, 1% free 17271K/17428K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 10K, 1% free 17434K/17604K, paused 7ms, total 7ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 65K, 2% free 17690K/17928K, paused 8ms, total 8ms
    I/dalvikvm-heap(24476): Grow heap (frag case) to 17.615MB for 328336-byte allocation
    D/dalvikvm(24476): GC_FOR_ALLOC freed 0K, 2% free 18010K/18252K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18011K/18252K, paused 9ms, total 9ms
    I/dalvikvm-heap(24476): Grow heap (frag case) to 18.073MB for 479536-byte allocation
    D/dalvikvm(24476): GC_FOR_ALLOC freed 0K, 2% free 18479K/18724K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 2% free 18481K/18724K, paused 2ms+1ms, total 10ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 6ms
    I/dalvikvm-heap(24476): Grow heap (frag case) to 18.532MB for 479536-byte allocation
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18949K/19196K, paused 9ms, total 9ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 2% free 19418K/19668K, paused 1ms+1ms, total 10ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 7ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19592K/19844K, paused 8ms, total 8ms
    I/dalvikvm-heap(24476): Grow heap (frag case) to 20.049MB for 933136-byte allocation
    D/dalvikvm(24476): GC_FOR_ALLOC freed 0K, 2% free 20503K/20756K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 2% free 21416K/21668K, paused 1ms+1ms, total 12ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 50K, 2% free 22351K/22580K, paused 7ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 5K, 1% free 23900K/24140K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 1% free 25824K/26084K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 3411K, 14% free 24528K/28204K, paused 12ms, total 13ms
    D/dalvikvm(24476): GC_CONCURRENT freed 2814K, 14% free 24256K/28204K, paused 2ms+1ms, total 11ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 4ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 9266K, 1% free 17270K/17424K, paused 10ms, total 10ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 15K, 1% free 17575K/17748K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 22K, 2% free 17875K/18072K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 1K, 2% free 18195K/18396K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18517K/18720K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18838K/19044K, paused 11ms, total 11ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19159K/19368K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19480K/19692K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19974K/20192K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 20616K/20840K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 21431K/21664K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 22714K/22960K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 182K, 2% free 24004K/24432K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 8478K, 33% free 17593K/26228K, paused 14ms, total 14ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 18K, 32% free 17895K/26228K, paused 12ms, total 12ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 18K, 31% free 18198K/26228K, paused 11ms, total 11ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 1K, 30% free 18519K/26228K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 29% free 18840K/26228K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 26% free 19482K/26228K, paused 2ms+1ms, total 14ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 10ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 23% free 20297K/26228K, paused 2ms+1ms, total 15ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 11ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 19% free 21260K/26228K, paused 10ms, total 10ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 15% free 22543K/26228K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 182K, 9% free 23979K/26228K, paused 21ms, total 22ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 8485K, 33% free 17598K/26132K, paused 13ms, total 14ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 25K, 32% free 17894K/26132K, paused 12ms, total 12ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 12K, 31% free 18204K/26132K, paused 12ms, total 12ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 1K, 30% free 18524K/26132K, paused 12ms, total 12ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 28% free 18845K/26132K, paused 8ms, total 9ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 26% free 19487K/26132K, paused 1ms+0ms, total 9ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 7ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 23% free 20129K/26132K, paused 9ms, total 9ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 20% free 21091K/26132K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 15% free 22375K/26132K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 9K, 9% free 24011K/26132K, paused 14ms, total 14ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 2147K, 10% free 23855K/26456K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_CONCURRENT freed 8776K, 35% free 17337K/26304K, paused 3ms+2ms, total 20ms
    W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
    W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
    W/ViewRootImpl(24476): Dropping event due to root view being removed: MotionEvent { action=ACTION_UP, id[0]=0, x[0]=564.0, y[0]=-50.0, toolType[0]=TOOL_TYPE_FINGER, buttonState=0, metaState=0, flags=0x0, edgeFlags=0x0, pointerCount=1, historySize=0, eventTime=28190972, downTime=28190972, deviceId=4, source=0x1002 }
    D/dalvikvm(24476): GC_CONCURRENT freed 186K, 31% free 17626K/25476K, paused 2ms+1ms, total 12ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 4ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 63K, 30% free 17884K/25476K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 3K, 29% free 18201K/25476K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 27% free 18696K/25476K, paused 2ms+1ms, total 12ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 9ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 25% free 19190K/25476K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 23% free 19831K/25476K, paused 9ms, total 9ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 19% free 20794K/25476K, paused 2ms+0ms, total 12ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 8ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 14% free 22078K/25476K, paused 1ms+2ms, total 14ms
    D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 12ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 7% free 23855K/25476K, paused 10ms, total 10ms
    D/dalvikvm(24476): GC_CONCURRENT freed <1K, 6% free 24176K/25476K, paused 2ms+1ms, total 14ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 6440K, 26% free 19562K/26216K, paused 9ms, total 10ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 93K, 23% free 20207K/26216K, paused 10ms, total 10ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed 11K, 21% free 20935K/26216K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 18% free 21673K/26216K, paused 9ms, total 9ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 15% free 22499K/26216K, paused 8ms, total 8ms
    D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 10% free 23695K/26216K, paused 9ms, total 9ms

  • HT201272 İos upgrade before i bought 7 , fifa 14 has not been purchased after the update again as in-app purchase to buy intake is required.

    İos upgrade before i bought 7 , fifa 14 has not been purchased after the update again as in-app purchase to buy intake is required.

    İos upgrade before i bought 7 , fifa 14 has not been purchased after the update again as in-app purchase to buy intake is required.

  • IPhone 4s got problem after I update to 7.1.1. Battery drain so fast

    iPhone 4s got problem after I update to 7.1.1. Battery drain so fast

    The Ultimate Guide to Solving iOS Battery Drain
    <http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain>

  • Had a problem after download updated itune, error 7 (window error 126) cant open itune at all

    Had a problem after download updated itune, it failed as Error code MSVCR80 and then next message is error 7 (window error 126), cant open itune at all

    Had a problem after download updated itune, it failed as Error code MSVCR80 and then next message is error 7 (window error 126), cant open itune at all

  • YouTube Time Elapsed Display Gets Smaller After Flash Update

    I recently updated my version of Adobe Flash Player to 11,8,800,94 and, since I've done this, the time elapse display in YouTube has gotten smaller in both Firefox and Chrome.  I'm using Windows 8.  How do I fix the YouTube display problem?  Thanks for any advice!

    Thanks to you both.
    Couple of things which I thought were "understood":
    UNTIL the flash update FF and youtube worked fine.
    AFTER the update they didn't.
    There have been posts like this in the past but as I said, that wasn't for THIS flash update.
    (Ok just on closing: I ticked the NEEDS MORE INFORMATION below. Don't know why, but I guess I need more information. What is it really for?)

  • Flash player wont play my youtube videos after i updated it on mozilla firefox to latest version

    I updated my flash player to the latest version 11.6.602.180 after not updating it for a very longtime. Now my youtube wont play videos just shows black screen. If i disable
    the plugin the videos play but there is a message which says plug in disabled/manage plug ins. What should i do???? If i use internet explorer the videos play on youtube but i also want them to play for firefox just like before.pliz help i do not know the previous plug in i had?

    I am having the same issue in Chrome... so checked Youtube in Firefox and IE... It's a Youtube issue!  Videos load a few seconds at a time and makes the playback horrible... unusable!  Wish someone at Google or Adobe would fix it!

  • Sound Problems after Flash 11.3 Update

    This reply is to the post by Ortho_Fan, number 28, which references a Firefox forum and "Firefox Hates New Update." This thread is specifically about problems that Flash 11.3 is causing with Firefox but the problem isn't with Firefox, it is with Flash Player 11.3. 
    I have no sound with Firefox, Chrome or Safari.  I do have sound with IE9 but some people do not.
    See these and probably other threads:
    No sound in flash
    http://forums.adobe.com/message/4483563?tstart=0
    Problem with sound after update
    http://forums.adobe.com/message/4483038

    I've branched this discussion into it's own thread, because the issue you're describing is different than the issue from the previous thread, which was related to a specific crash instance.  We'd like to keep the threads focused on particular issues to help both investigate and collate the information coming in, and to aid in discovery for people that are experiencing similar issues.  A single thread with a dozen issues is far less useful in either regard.
    For the sound issue you're experiencing, I would recommend that you follow the advice in the threads you've referenced above.
    Flash Player 11.3 included new sound enhancments to facilitate support for low-latency audio, to facilitate more repsonsive sound in complex Flash games.  While we try to test a wide array of hardware, and conduct months of beta testing, it's impossible to hit every device, OS, browser and driver combination.
    Please ensure that you have the lastet drivers installed for your sound card/chipset.  If the problem persists, please post details of your configuration to that forum thread so that we can track down that hardware/driver combo and investigate the problem. 
    As a workaround, you may wish to roll back to Flash Player 10.3, until a new version is available.  Flash Player 10.3 contains up-to-date security patches (we maintain one major version back for Enterprise), and will revert the sound change that is causing problems for you.
    http://www.adobe.com/support/flashplayer/downloads.html
    Thanks!

  • Problems after Flash Player update

    Hi,
    i am writing because i have some strange sensations in my
    application after i updated my flash player to version 9,0,115,0.
    this is the problem:
    i have a dynamic textfield with htmlt text, in this html text
    i have some img-tags which i use to add Sprites into the htmltext
    that have some kind of user interactivity (rollover, click...).
    until now everything worked fine, just with the update i have
    the problem that i lost the interactivity to this objects.
    just some sprites which have embedded assets from a swf have
    the interactivity (rollover, click...) but also jsut on the
    embedded symbols and not on the whole sprite.
    example: if i put the event on the sprite:
    this.addEventListener(MouseEvent.CLICK, doSomething)
    the event will be just dispatched if i click on the embedded
    symbols.
    i tried Security.allowDomain('*') but this didnt solved my
    problem
    its like i am getting no focus on the sprite.
    like i said before... it was working before the update :-(
    greetings and thankful for every help!
    Pixelista77

    Hi Alex, It could be that with the Upgrade to SP2(a major upgrade) it upset Flash Player:-) I've had various glitches when making system changes as well. Then with the 10.1 version of Flash Player being released at the same time, you may have just got caught in the cross fire:-)
    It sounds like you did everything correctly, but I just want to touch base on the ActiveX Control not being registered.
    When this message is received it can mean the Administrator Account was not used, giving the permissions needed for that. It could also mean that your Anti-Virus/Firewall could have blocked it. Some A/V's even when disabled prior to Uninstalling/Installing, will re-enable upon the first Reboot after the Uninstall.
    Let me know on these.
    Thanks,
    eidnolb

  • C6-00 - YouTube Sign In problems after sw update t...

    I've noticed a problem with signing in to YouTube.
    After software upgrade when I open YouTube app and click "Sign In" I cannot sign in. The browser says Opening secure connection, I choose Yes and a blank page loads afterwards... in my previous software 11.0.0.29 it was ok.
    I've tried this on other Nokia E52 and E51 and it was working OK
    Apparently when the browser of C6 was updated they've screwed up this functionality.
    Please fix it!
    Sw version: 20.0.0.42 (20.0.0.42.231.01)
    RM-612
    Prod.Code: 059C2C0

    Hello
    I noticed that the last firmware 20.0.42 has too many problems, me too faced the keyboard dialer problem after updating to 20.0.42 although it was working correctly in the default version 11.0.29, so we have no choice ONLY waiting for nokia till it produces a new update fixing all these problems
    u can check for the problem i introduced, from home screen -> dialer -> open keyboard , and try to print bbb in my c6 it still pronting aaa and not switches to b or c and the same for all other buttons
    Good Luck

  • Z68A-GD65 (G3) Memory problems after BIOS update

    Good day, i'm russian, so sorry for my english.
    Friend of mine had MSi Z68A-GD65 (G3), i5-2500K, memory pair 2*2GB with bios 22.8 (latest version with no red letters about ME8 and IvyBridge).
    He decided to upgrade the processor to IvyBrydge and updated bios with new ME8. Then the computer went into a state of continue restarting every 3 seconds. After replacing the CPU to the new Ivy - computer works good, the impression is that the computer does not understand Sandy now and switched toIvy. But it has seen only one of memory pair. My friend just bought a new motherboard. Now he has no problems. I took his MB and SandyBridge CPU.
    Flashing the bios to the old version by M-Flash - it does not see the BIOS file, although it is there (in the root, FAT, 2G). Flashed it under dos with AFUDE238 with a key -x, it said about mismatched ROM ID. After the old BIOS flashing (with an Ivy) computer went three-second reset mode. CPU changed to Sandy i5-2500K - now works good. By the way, now M-Flash see the firmware on a flash drive - I flashed it again from the M-Flash, just in case, reset the settings.
    What is the problem: if I set the memory into the slot 3 or 4, the computer goes into a three-second reboot, it does not matter is the memory in the first two slots or no. If this memory is inserted in the first two slots - all ok. So I work now - in the first two slots with no dual-channel mode.
    The feeling is that the problem appeared after first flashing to Ivy and remained after flashing back to Sandy.
    Question 1: What to do to get working the memory slots?
    Question 2: Is BIOS 22.8 - the latest which I will have with Sandy? (There is a problem now when the computer starts - 1 times out of 10 will not boot - reset is helping, and the BIOS at starting not very fast).
    There are posts about people with the same MB and the CPU and the new BIOS (25.2) that supports Ivy. I'm confused. It means I can use the new firmware from SandyBridge. But there are many posts about problems with new firmware. Where is the true?
    Just checked BIOS version -  P.1 (25.1) 2012-04-16 - by the way with Ivy support. But I flashed with 22.8, I'm sure. ME version in BIOS isn't shown, but while booting - ME 7.0
    What does it mean? Can it be repaired? What should I do?

    Thanks to all. My system is working fine now.
    What it was. I flashed BIOS with tool from this forum. Bios flashed good, but problem still was here. Then I flashed to the first bios version from support site. And again flashed ok but memory still not working in slots 3 and 4. Then I decided to flash back to last flash with Sandy support 22.8 (or 23.8). Then I flashed to the last bios at all - 25.4. Flashed it from dos - this was pretty long. It rebooted 3 times (ME updated too). I still don't know  - what it was with first flashing to Ivy. Now it's ok.
    So I decided the problem is bent pin. With magniglass and needle I've found some uncertain pins (these were not BENT, but slightly bent) and touched these with my needle. And that was the answer. Now all works fine. Thank you all.
    On the russian msi forum no one answered and helped me at all.

Maybe you are looking for

  • New mini HDMI and TV display

    Every thing is fine initially with hdmi connected from mini to a pioneer plasma TV display. But i want to try other resolution to see if a better quality could be obtained. When i try a resolution which my plasma TV don't support, the screen turns bl

  • Error trying to update samples

    The preview download instructions recommend updating the SDK. I am following those instructions have received this error when runing the LiveCycle_ES_SDK\samples\SamplesConfig\bin and run runUninstallSamples.bat Error log >> java.lang.NoClassDefFound

  • Problems in sap script/smart forms

    what are the major problems will come in real time about smart form and sap script?

  • HTML applet and JAVA command

    hi, i have a problem that i can not solve.... i can execute my code in typing javac Myclass.java and then i type java Myclass then my game is running very well. but when i put all my classes in a HTML page it does not work. I see my class being charg

  • Why is there no Array of XControl in LabView8.6

    You can have a Cluster of XControls but not an array of an XControl. Why can't Xcontrols placed in an array in LabView 8.6? Is this changed in LV2009?