Youtube subs. dissappeared on ATV2 after update
After updating ATV2 to the newest FW, my youtube subscriptions disappeard. I tried to log off/log in again but it still says, no subs. available. On PC it works grat, so I know my subs. are there.
I tried both ways, connected and separated. I've tried two routers and every configuration on them I could think of. Like I said, music streams just fine, but video won't. I can only think it has something to do with the update, since I can stream the same video files to my iPad and to another MacBook Pro across the same network without any problems.
Similar Messages
-
Can't play music on ipod and youtube videos on speaker mode after update
Hi people!
I just updated to version 3.12 yesterday and after which, i tried playing songs with ipod mode and the speaker was not working. Tried plugging on a earphone and was able to listen to the music. The same issue was encountered on playing YouTube videos on the phone via speaker mode. The speakers however works when someone calls and while communicating via speaker mode on a phone call.
I tried to do a system restore but was unable to revert back to the previous version 3.11 on my backup file. The same issues were encounter after doing a restore and notice that the phone boots up from a hard reset significantly longer and some ringtone files which shows already sync into the phone on itunes was not found on the iphone itself.
However just when i was about to give up, i tried one last time to reboot the phone again to troubleshoot if the speakers was the one causing the problem, I tried setting "Lock sounds" and "Keyboard Clicks" off and on again and was able to get the speakers working now for ipod and youtube. Thanks goodness the speakers wasn't spoiled.
But when i sync some of my music files back from my computer again and every time i hook up to charge my phone, the problems keep coming back...
Is there anyone encountering this problem too and any permanent solutions or should i just visit the service center for a peace of mind as i do have 6 months of warranty left...
Thank you all for your time. Regards...Try the standared fixes:
- Reset. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults. -
After updating my system to Mountain Lion 10.8.2 I can no longer view videos on Facebook or other sites. The only one I can view videos on is youtube. I have downloaded Adobe Flash player and still no luck. I cannot even open Preview on my computer anymore. Any ideas would be helpful thanks
Merely clicking the Preview icon in the Dock doesn't cause it to open anything, unless you had one or more windows open the last time it quit.
If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test.
1. If you're getting a "blocked plug-in" error, triple-click the line below to select it:
/Library/Internet Plug-Ins Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu. A folder should open. If there is more than one item in the folder with the words "Flash Player" (not "flashplayer") in the name, open the respective Info windows, check the version numbers, and delete all except the latest. You may be prompted for your login password. If you get the same error after doing that, re-download and reinstall Flash. Download it from this page:
Adobe - Install Adobe Flash Player
Never download a Flash update from anywhere else.
2. If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked Enable plug-ins.
3. Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.
4. In the Safari preference window, select
Privacy ▹ Remove All Website Data
Close the window. Then select
▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane. -
my iphone 4S no longer plays music output to speaker after updating to version 6.1.3. I am unable to reset the phone to an earlier version! How do I get my audio output to speaker back? (music, audible, youtube, netflix)
So you have business contacts that were lost... do you not have these on a Database in some shape or form? Sounds like you need to invest in a RAID1 backup setup for your computer so you dont have this issue in the future.
As for repairing your problem, sounds like you are going to need to start from scratch at this point or if the data is still on your phone look into a program that can take the information from the phone onto iTunes. -
Has anyone else had the issue of losing theYouTube app on the original IPhone after updating to 4.3.5? (The Restrictions is turned as OFF)
The Youtube app is now cleaned away from the IOS 4.3.5
Any help would be appreciated.This still doesn't make sense. The iPhone 4 may have come with a number of different versions of iOS out of the box depending on when it was purchased and how long it had sat on the shelf.
If you can't find it, check restrictions and make sure you haven't locked it out. -
After updating to iOS7, i can't play youtube songs while the phone is charging using car usb adapter
I have a iphone 4S and updated to iOS7. After update i am not able to play songs in my car using youtube when the phone was plugged into usb power. The way i play youtube songs (that's how i listen to songs in the car) from my iphone is, i have AUX cable that connects the iphone to AUX port in my car music system. When the phone is put into chaging mode using the USB cable in my car, it start assuming i am connected to apple TV and everything goes blank. If taken out of charging it works as expected.
Now how it worked befoe iOS7? Before everytime i put the phone into charging in the car in-built USB port, after a few minutes a message pops up in the phone "This accessory is not supported ..." I press "OK" and after that playing songs from youtube is business as usual. If i connect the AUX cable before i see this pops up message and start playing songs, it assumes connecting to apple tv and songs would never play.
With iOS7, i waited 2 hours and still have not seen the pop up message "This accessory is not supported ..." and playing using AUX cable all the aasuming connected to apple TV. Can some one please help to resolve the issue ??
Thanks.wooh-ho ! I have upgraded iOS 7.0.3 yesteray, plugged the device to my car USB charger while going home from work... guess what to my surprise it popped up the message "This accessory is not supported ..." in a few minutes exactly as it used to be before iOS7. However i did not play any online music since connection was poort is disrupted in my area yesterday. I am sure it will play music while on charge. Many thanks to apple engineering team. They definitely read the forum and picked my issue to address. Great job. Kudos !
I was almost thought of dropping the phone since it became useless in the car i drive. Now maybe i will upgrade to 5S in couple weeks! -
I am unable to view flash videos from all websites except youtube after updating to Firefox 4. All help will be appreciated. Thanks in advance :)
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows) -
After updating to iOS 5 cannot activate FaceTime nor iMessage on my iPad 2. I find that my time zone is wrong, when auto is selected. YouTube app continuously say "cannot connect YouTube" so is unusable.
I've already used all this features/apps with the previous OS but not now.Thanks kat729, I tried everything and only restoring my iPad corrected this issue. Now all Apps are working properly.
-
I just cant watch videos on YouTube or Facebook after updating to ios8.0.2. Can anybody tell how to fix that?
Differing sites use slightly different standards for videos, there are possibly other posts about this sort problem see for instance [https://support.mozilla.com/en-US/questions/790642 this one] . You may see a suitable answer in one of the other threads.
It is also worth noting Internet Explorer will use different FlashPlayer plugins, even though the version numbers may correspond with those used by Firefox.
See also [[Flash-based videos and sound do not play correctly]] -
YouTube gone after updating to IOS 6
How do I get YouTube back after updating my iPad 2 with IOS 6 it's completely disappeared
Try the Squrl Video Discovery App -- http://itunes.apple.com/us/app/squrl-video-discovery/id398256703?mt=8 -- Its YouTube, Netflix, Vimeo and more.. gets good ratings
-
After update ipad3 to ios6, YouTube disappear. Where can I use YouTube?
after update ipad3 to ios6, YouTube disappear. Where can I use YouTube?
There's a new app in the app store from google. You have to search under iphone apps, it doesn't show under ipad apps.
-
YouTube videos within safari after updating ios5
after updating to iOS5 on my iPad One, YouTube video will not play from websites WITHIN Safari anymore. They did before updating. The same video will show when accessed directly via the YouTube app.
When I say 'won't play', I mean that video doesn't shoe up completely. Audio on said clips plays fine, and the 'Youtube' bug shows up on the screen in its lower-right location. However, where video would be just appears as black.
Anyone else seeing this with iPad One (or other devices using Safari).I think maybe I was using to an old version which is not updated any more - it was called "Easylist USA". It seems they have re-named it but it doesn't automatically remove the old one and add the new one, now called "Easylist (English)". When I add the new Easylist, YouTube seems to work OK.
Last edited by shaurz (2011-11-19 12:31:39) -
Music dissappeared after update
after updating my ipod touch in itunes wipe of music in my libary and on ipod device how do i retrevie my music
iOS: Device not recognized in iTunes for Mac OS X
Or
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem
NOTE:
You will have to backup the iPod to the old computer and then restore from backup since you can only sync with one computer and the updating computer is now your syncing computer
iOS: Back up and restore your iOS device with iCloud or iTunes -
Problem with new version 4.3.2 apps not working " after update to the new version "
Problem with new version 4.3.2 apps not working " after update to the new version "
i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!Hi There
Had the same problem as you. App would terminate when launched.
Solution to working You Tube app:
-Go to playstore
- Uninstall app (it doesn't remove the app, only removes the update)
- "Et Voila", working again.
This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
Hope it helped.
Best Regards -
Multiseat with Lightdm broken after updating Mesa
Hi,
I've been using a multiseat configuration for months now, and it was working almost perfectly (almost - multiseating is far from being really stable yet IMHO, but anyway).
I updated mesa-libgl a few days ago and confirmed packages replacement, but right after rebooting my second seat didn't work anymore. The display stays black and no login screen shows up, although I suppose a signal is still sent as the monitor doesn't go into sleep mode. The first seat on the other side is working as usual, no difference noted.
In the processes, I can only see one Xorg instance (used by the first seat), when I'm supposed to have tow instances, one for each seat and with different parameters. It's like the second seat is crashing, but I can see no trace of such crash in the logs (kernel.log or everything.log). Even the Xorg.1.log contains all the informations as if the display was running fine.
The day after updating Mesa, I also updated Lightdm but it didn't change anything (I had a brief hope for a moment).
My configuration is the following :
- Nvidia GTX 760: used on seat0 as dual-head with Nouveau driver (Layout-Main in Xorg)
- Intel GMA: used on seat1 on single-head with Intel driver (Layout-Aux in Xorg)
I'm using Lightdm with this configuration:
[LightDM]
minimum-vt=1
run-directory=/run/lightdm
[SeatDefaults]
greeter-session=lightdm-gtk-greeter
greeter-show-manual-login=true
session-wrapper=/etc/lightdm/Xsession
greeter-setup-script=/usr/bin/numlockx on
[Seat:0]
xserver-command=/usr/bin/X :0 -sharevts
xserver-layout=Layout-Main
[Seat:1]
xserver-command=/usr/bin/X :1 -sharevts -novtswitch
xserver-layout=Layout-Aux
The Xorg configuration for the seats is divided into two files:
/etc/X11/xorg.conf.d/50-serverlayout-main.conf
Section "ServerLayout"
Identifier "Layout-Main"
Screen "Screen-Main" 0 0
InputDevice "Logitech-Illuminated" "CoreKeyboard"
InputDevice "Logitech-G100S" "CorePointer"
Option "AllowEmptyInput" "true"
EndSection
Section "InputDevice"
Identifier "Logitech-G100S"
Driver "evdev"
Option "Protocol" "auto"
Option "Device" "/dev/input/by-id/usb-Logitech_G100s_Optical_Gaming_Mouse-event-mouse"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
Option "GrabDevice" "on" # prevent send event to other X-servers
EndSection
Section "InputDevice"
Identifier "Logitech-Illuminated"
Driver "evdev"
Option "XkbLayout" "fr"
Option "XkbModel" "pc104"
Option "Device" "/dev/input/by-id/usb-Logitech_Logitech_Illuminated_Keyboard-event-kbd"
Option "GrabDevice" "on" # prevent send event to other X-servers
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Samsung"
ModelName "Samsung SyncMaster 2433"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 60.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Samsung"
ModelName "Samsung SyncMaster 2333sw"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 60.0
Option "DPMS"
EndSection
Section "Device"
Identifier "NVIDIA-GTX760"
Driver "nouveau"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 760"
EndSection
Section "Screen"
Identifier "Screen-Main"
Device "NVIDIA-GTX760"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
/etc/X11/xorg.conf.d/51-serverlayout-aux.conf
Section "ServerLayout"
Identifier "Layout-Aux"
Screen "Screen-Aux" 0 0
InputDevice "K400r-keyboard" "CoreKeyboard"
InputDevice "K400r-keyboard-multimedia" "SendCoreEvents"
InputDevice "K400r-mouse" "CorePointer"
Option "AllowEmptyInput" "true"
EndSection
Section "InputDevice"
Identifier "K400r-mouse"
Driver "evdev"
Option "Protocol" "auto"
Option "Device" "/dev/input/by-id/usb-Logitech_USB_Receiver-if02-mouse"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
Option "GrabDevice" "on" # prevent send event to other X-servers
EndSection
Section "InputDevice"
Identifier "K400r-keyboard"
Driver "evdev"
Option "XkbLayout" "fr"
Option "XkbModel" "pc104"
Option "Device" "/dev/input/by-id/usb-Logitech_USB_Receiver-if02-event-mouse"
Option "GrabDevice" "on" # prevent send event to other X-servers
EndSection
Section "InputDevice"
Identifier "K400r-keyboard-multimedia"
Driver "evdev"
Option "Device" "/dev/input/by-id/usb-Logitech_USB_Receiver-if02-event-mouse"
Option "XkbModel" "evdev"
Option "GrabDevice" "on"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Compaq"
ModelName "Compaq Q2159"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 60.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Intel-I915"
Driver "intel"
VendorName "Intel"
BoardName "Intel IGP"
BusID "PCI:0:2:0"
# Option "NoAccel" "True"
# Option "DRI" "False"
# Option "TearFree" "true"
# Option "AccelMethod" "sna"
EndSection
Section "Screen"
Identifier "Screen-Aux"
Device "Intel-I915"
Monitor "Monitor1"
DefaultDepth 24
EndSection
When I disable the primary seat configuration in Xorg files (I just prevent the file from being loaded), and after I restart Lightm via
# systemctl restart lightdm
the display shows up correctly on the secondary seat (and not on the primary, which is logical so far). So in the end it seems I just cannot have both seat running at the same time, but individually they work fine.
My logical assumption is that the recent upgrade of the Mesa packages somehow broke this configuration, but I cannot find why and how.
FYI, here's what I tried:
- play with Intel drivers options in Xorg (NoAccel, DRI, ...)
- play with Xorg options on the command line of each seat (-sharevts, -novtswitch)
- switch to Nvidia proprietary drivers (but here also, only the primary seat works, but that may be for a totally different reason, which is why I used Nouveau ever since I set up this configuration)
Here are the Xorg log files:
Xorg.0.log
X.Org X Server 1.16.1
Release Date: 2014-09-21
[ 6.853] X Protocol Version 11, Revision 0
[ 6.853] Build Operating System: Linux 3.16.1-1-ARCH x86_64
[ 6.853] Current Operating System: Linux leto 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 21:54:13 CEST 2014 x86_64
[ 6.854] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=83e16b30-5b35-4b15-9bce-5ec87c00d46d rw quiet
[ 6.854] Build Date: 21 September 2014 10:53:13AM
[ 6.854]
[ 6.854] Current version of pixman: 0.32.6
[ 6.854] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 6.854] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 6.854] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 3 23:21:15 2014
[ 6.855] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 6.855] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 6.857] (==) ServerLayout "Layout-Main"
[ 6.857] (**) |-->Screen "Screen-Main" (0)
[ 6.857] (**) | |-->Monitor "Monitor0"
[ 6.857] (**) | |-->Device "NVIDIA-GTX760"
[ 6.857] (**) |-->Input Device "Logitech-Illuminated"
[ 6.857] (**) |-->Input Device "Logitech-G100S"
[ 6.857] (==) Automatically adding devices
[ 6.857] (==) Automatically enabling devices
[ 6.857] (==) Automatically adding GPU devices
[ 6.858] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 6.858] Entry deleted from font path.
[ 6.859] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 6.860] Entry deleted from font path.
[ 6.860] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 6.860] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 6.860] Entry deleted from font path.
[ 6.860] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 6.860] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 6.860] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 6.860] (II) Loader magic: 0x818d80
[ 6.860] (II) Module ABI versions:
[ 6.860] X.Org ANSI C Emulation: 0.4
[ 6.860] X.Org Video Driver: 18.0
[ 6.860] X.Org XInput driver : 21.0
[ 6.860] X.Org Server Extension : 8.0
[ 6.861] (EE) systemd-logind: failed to get session: PID 656 does not belong to any known session
[ 6.861] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 6.861] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 6.862] (--) PCI: (0:0:2:0) 8086:0412:1458:d000 rev 6, Mem @ 0xdb400000/4194304, 0xc0000000/268435456, I/O @ 0x0000f000/64
[ 6.862] (--) PCI:*(0:1:0:0) 10de:1187:1462:2848 rev 161, Mem @ 0xda000000/16777216, 0xd0000000/134217728, 0xd8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 6.862] (II) Open ACPI successful (/var/run/acpid.socket)
[ 6.862] (II) LoadModule: "glx"
[ 6.863] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 6.873] (II) Module glx: vendor="X.Org Foundation"
[ 6.873] compiled for 1.16.1, module version = 1.0.0
[ 6.873] ABI class: X.Org Server Extension, version 8.0
[ 6.873] (==) AIGLX enabled
[ 6.873] (II) LoadModule: "nouveau"
[ 6.874] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 6.875] (II) Module nouveau: vendor="X.Org Foundation"
[ 6.875] compiled for 1.16.1, module version = 1.0.11
[ 6.875] Module class: X.Org Video Driver
[ 6.875] ABI class: X.Org Video Driver, version 18.0
[ 6.875] (II) LoadModule: "evdev"
[ 6.875] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6.877] (II) Module evdev: vendor="X.Org Foundation"
[ 6.877] compiled for 1.16.0, module version = 2.9.0
[ 6.877] Module class: X.Org XInput Driver
[ 6.877] ABI class: X.Org XInput driver, version 21.0
[ 6.877] (II) NOUVEAU driver
[ 6.877] (II) NOUVEAU driver for NVIDIA chipset families :
[ 6.877] RIVA TNT (NV04)
[ 6.877] RIVA TNT2 (NV05)
[ 6.877] GeForce 256 (NV10)
[ 6.877] GeForce 2 (NV11, NV15)
[ 6.877] GeForce 4MX (NV17, NV18)
[ 6.877] GeForce 3 (NV20)
[ 6.877] GeForce 4Ti (NV25, NV28)
[ 6.878] GeForce FX (NV3x)
[ 6.878] GeForce 6 (NV4x)
[ 6.878] GeForce 7 (G7x)
[ 6.878] GeForce 8 (G8x)
[ 6.878] GeForce GTX 200 (NVA0)
[ 6.878] GeForce GTX 400 (NVC0)
[ 6.878] (++) using VT number 1
[ 6.878] (II) [drm] nouveau interface version: 1.1.2
[ 6.878] (II) Loading sub module "dri2"
[ 6.878] (II) LoadModule: "dri2"
[ 6.878] (II) Module "dri2" already built-in
[ 6.878] (--) NOUVEAU(0): Chipset: "NVIDIA NVE4"
[ 6.878] (**) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 6.878] (==) NOUVEAU(0): RGB weight 888
[ 6.878] (==) NOUVEAU(0): Default visual is TrueColor
[ 6.878] (==) NOUVEAU(0): Using HW cursor
[ 6.878] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[ 6.878] (==) NOUVEAU(0): Page flipping enabled
[ 6.878] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[ 6.878] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[ 6.878] (II) NOUVEAU(0): Initializing outputs ...
[ 6.935] (II) NOUVEAU(0): Output DVI-I-1 using monitor section Monitor0
[ 6.965] (II) NOUVEAU(0): Output DVI-D-1 has no monitor section
[ 6.967] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[ 7.073] (II) NOUVEAU(0): Output DP-1 has no monitor section
[ 7.073] (II) NOUVEAU(0): 4 crtcs needed for screen.
[ 7.076] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[ 7.076] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[ 7.076] (II) NOUVEAU(0): Allocated crtc nr. 2 to this screen.
[ 7.076] (II) NOUVEAU(0): Allocated crtc nr. 3 to this screen.
[ 7.134] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 7.134] (II) NOUVEAU(0): Manufacturer: SAM Model: 5c8 Serial#: 1129132596
[ 7.134] (II) NOUVEAU(0): Year: 2009 Week: 46
[ 7.134] (II) NOUVEAU(0): EDID Version: 1.3
[ 7.134] (II) NOUVEAU(0): Digital Display Input
[ 7.134] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 52 vert.: 29
[ 7.134] (II) NOUVEAU(0): Gamma: 2.20
[ 7.134] (II) NOUVEAU(0): DPMS capabilities: Off
[ 7.134] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 7.134] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 7.134] (II) NOUVEAU(0): redX: 0.647 redY: 0.334 greenX: 0.284 greenY: 0.607
[ 7.134] (II) NOUVEAU(0): blueX: 0.151 blueY: 0.071 whiteX: 0.312 whiteY: 0.329
[ 7.134] (II) NOUVEAU(0): Supported established timings:
[ 7.134] (II) NOUVEAU(0): 640x480@60Hz
[ 7.134] (II) NOUVEAU(0): 800x600@56Hz
[ 7.134] (II) NOUVEAU(0): 800x600@60Hz
[ 7.134] (II) NOUVEAU(0): 1024x768@60Hz
[ 7.134] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 7.134] (II) NOUVEAU(0): Supported standard timings:
[ 7.134] (II) NOUVEAU(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 7.134] (II) NOUVEAU(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 7.134] (II) NOUVEAU(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 7.134] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 7.134] (II) NOUVEAU(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 7.134] (II) NOUVEAU(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 7.134] (II) NOUVEAU(0): Supported detailed timing:
[ 7.134] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 521 x 293 mm
[ 7.134] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 7.134] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 7.134] (II) NOUVEAU(0): Ranges: V min: 56 V max: 60 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[ 7.134] (II) NOUVEAU(0): Monitor name: SyncMaster
[ 7.134] (II) NOUVEAU(0): Serial No: H9XSB06266
[ 7.134] (II) NOUVEAU(0): Supported detailed timing:
[ 7.134] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 521 x 293 mm
[ 7.134] (II) NOUVEAU(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
[ 7.134] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 7.134] (II) NOUVEAU(0): Supported detailed timing:
[ 7.134] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 521 x 293 mm
[ 7.134] (II) NOUVEAU(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 7.134] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 7.134] (II) NOUVEAU(0): Supported detailed timing:
[ 7.134] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 521 x 293 mm
[ 7.134] (II) NOUVEAU(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 7.134] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 7.134] (II) NOUVEAU(0): Supported detailed timing:
[ 7.134] (II) NOUVEAU(0): clock: 27.0 MHz Image Size: 521 x 293 mm
[ 7.134] (II) NOUVEAU(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
[ 7.134] (II) NOUVEAU(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
[ 7.134] (II) NOUVEAU(0): Supported detailed timing:
[ 7.134] (II) NOUVEAU(0): clock: 27.0 MHz Image Size: 521 x 293 mm
[ 7.134] (II) NOUVEAU(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 7.134] (II) NOUVEAU(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 7.134] (II) NOUVEAU(0): Number of EDID sections to follow: 1
[ 7.134] (II) NOUVEAU(0): EDID (in hex):
[ 7.134] (II) NOUVEAU(0): 00ffffffffffff004c2dc80534324d43
[ 7.134] (II) NOUVEAU(0): 2e13010380341d782aeed1a555489b26
[ 7.134] (II) NOUVEAU(0): 1250542308008100814081809500a940
[ 7.134] (II) NOUVEAU(0): b30001010101023a801871382d40582c
[ 7.134] (II) NOUVEAU(0): 450009252100001e000000fd00383c1e
[ 7.134] (II) NOUVEAU(0): 5111000a202020202020000000fc0053
[ 7.134] (II) NOUVEAU(0): 796e634d61737465720a2020000000ff
[ 7.134] (II) NOUVEAU(0): 00483958534230363236360a20200111
[ 7.134] (II) NOUVEAU(0): 02010400023a80d072382d40102c4580
[ 7.134] (II) NOUVEAU(0): 09252100001e011d007251d01e206e28
[ 7.134] (II) NOUVEAU(0): 550009252100001e011d00bc52d01e20
[ 7.134] (II) NOUVEAU(0): b828554009252100001e8c0ad0902040
[ 7.134] (II) NOUVEAU(0): 31200c4055000925210000188c0ad08a
[ 7.134] (II) NOUVEAU(0): 20e02d10103e96000925210000180000
[ 7.134] (II) NOUVEAU(0): 00000000000000000000000000000000
[ 7.134] (II) NOUVEAU(0): 0000000000000000000000000000005e
[ 7.134] (II) NOUVEAU(0): Not using mode "1920x1080" (vrefresh out of range)
[ 7.134] (II) NOUVEAU(0): Not using mode "1280x720" (vrefresh out of range)
[ 7.134] (II) NOUVEAU(0): Not using mode "720x576" (vrefresh out of range)
[ 7.134] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[ 7.134] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 7.134] (II) NOUVEAU(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 7.134] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 7.164] (II) NOUVEAU(0): EDID for output DVI-D-1
[ 7.164] (II) NOUVEAU(0): Manufacturer: SAM Model: 4de Serial#: 1129132595
[ 7.164] (II) NOUVEAU(0): Year: 2009 Week: 6
[ 7.164] (II) NOUVEAU(0): EDID Version: 1.3
[ 7.164] (II) NOUVEAU(0): Digital Display Input
[ 7.164] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 51 vert.: 29
[ 7.164] (II) NOUVEAU(0): Gamma: 2.20
[ 7.164] (II) NOUVEAU(0): DPMS capabilities: Off
[ 7.164] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 7.164] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 7.164] (II) NOUVEAU(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 7.164] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 7.164] (II) NOUVEAU(0): Supported established timings:
[ 7.164] (II) NOUVEAU(0): 640x480@60Hz
[ 7.164] (II) NOUVEAU(0): 800x600@56Hz
[ 7.164] (II) NOUVEAU(0): 800x600@60Hz
[ 7.164] (II) NOUVEAU(0): 1024x768@60Hz
[ 7.164] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 7.164] (II) NOUVEAU(0): Supported standard timings:
[ 7.164] (II) NOUVEAU(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 7.164] (II) NOUVEAU(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 7.164] (II) NOUVEAU(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 7.164] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 7.164] (II) NOUVEAU(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 7.164] (II) NOUVEAU(0): #5: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 7.164] (II) NOUVEAU(0): Supported detailed timing:
[ 7.164] (II) NOUVEAU(0): clock: 138.5 MHz Image Size: 477 x 268 mm
[ 7.164] (II) NOUVEAU(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 7.164] (II) NOUVEAU(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
[ 7.164] (II) NOUVEAU(0): Ranges: V min: 56 V max: 61 Hz, H min: 30 H max: 75 kHz, PixClock max 175 MHz
[ 7.164] (II) NOUVEAU(0): Monitor name: SyncMaster
[ 7.164] (II) NOUVEAU(0): Serial No: H9XS201897
[ 7.164] (II) NOUVEAU(0): EDID (in hex):
[ 7.164] (II) NOUVEAU(0): 00ffffffffffff004c2dde0433324d43
[ 7.164] (II) NOUVEAU(0): 0613010380331d782aee91a3544c9926
[ 7.164] (II) NOUVEAU(0): 0f50542308008100814081809500b300
[ 7.164] (II) NOUVEAU(0): a940010101011a3680a070381f403020
[ 7.164] (II) NOUVEAU(0): 3500dd0c1100001a000000fd00383d1e
[ 7.164] (II) NOUVEAU(0): 4b11000a202020202020000000fc0053
[ 7.164] (II) NOUVEAU(0): 796e634d61737465720a2020000000ff
[ 7.164] (II) NOUVEAU(0): 00483958533230313839370a2020008b
[ 7.164] (II) NOUVEAU(0): Printing probed modes for output DVI-D-1
[ 7.164] (II) NOUVEAU(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 7.164] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 7.164] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 7.166] (II) NOUVEAU(0): EDID for output HDMI-1
[ 7.270] (II) NOUVEAU(0): EDID for output DP-1
[ 7.270] (II) NOUVEAU(0): Output DVI-I-1 connected
[ 7.270] (II) NOUVEAU(0): Output DVI-D-1 connected
[ 7.270] (II) NOUVEAU(0): Output HDMI-1 disconnected
[ 7.270] (II) NOUVEAU(0): Output DP-1 disconnected
[ 7.270] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 7.270] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1920x1080
[ 7.270] (II) NOUVEAU(0): Output DVI-D-1 using initial mode 1920x1080
[ 7.270] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 7.270] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
[ 7.270] (**) NOUVEAU(0): Driver mode "1920x1080": 138.5 MHz (scaled from 0.0 MHz), 66.6 kHz, 59.9 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 7.270] (**) NOUVEAU(0): Driver mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "1440x900": 88.8 MHz (scaled from 0.0 MHz), 55.5 kHz, 59.9 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "1280x800": 71.0 MHz (scaled from 0.0 MHz), 49.3 kHz, 59.9 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 7.270] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 7.270] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 7.270] (==) NOUVEAU(0): DPI set to (96, 96)
[ 7.270] (II) Loading sub module "fb"
[ 7.270] (II) LoadModule: "fb"
[ 7.270] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 7.272] (II) Module fb: vendor="X.Org Foundation"
[ 7.272] compiled for 1.16.1, module version = 1.0.0
[ 7.272] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7.272] (II) Loading sub module "shadowfb"
[ 7.272] (II) LoadModule: "shadowfb"
[ 7.272] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 7.272] (II) Module shadowfb: vendor="X.Org Foundation"
[ 7.272] compiled for 1.16.1, module version = 1.0.0
[ 7.272] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7.272] (--) Depth 24 pixmap format is 32 bpp
[ 7.278] (II) NOUVEAU(0): Channel setup complete.
[ 7.279] (II) NOUVEAU(0): [COPY] async initialised.
[ 7.280] (II) NOUVEAU(0): [DRI2] Setup complete
[ 7.280] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 7.280] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 7.281] (II) Loading sub module "exa"
[ 7.281] (II) LoadModule: "exa"
[ 7.281] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 7.281] (II) Module exa: vendor="X.Org Foundation"
[ 7.281] compiled for 1.16.1, module version = 2.6.0
[ 7.281] ABI class: X.Org Video Driver, version 18.0
[ 7.281] (II) EXA(0): Driver allocated offscreen pixmaps
[ 7.281] (II) EXA(0): Driver registered support for the following operations:
[ 7.281] (II) Solid
[ 7.281] (II) Copy
[ 7.281] (II) Composite (RENDER acceleration)
[ 7.281] (II) UploadToScreen
[ 7.281] (II) DownloadFromScreen
[ 7.281] (==) NOUVEAU(0): Backing store enabled
[ 7.281] (==) NOUVEAU(0): Silken mouse enabled
[ 7.282] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 7.282] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 7.282] (**) NOUVEAU(0): DPMS enabled
[ 7.282] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 7.282] (--) RandR disabled
[ 7.363] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 7.363] (II) AIGLX: enabled GLX_ARB_create_context
[ 7.363] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 7.363] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 7.363] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 7.363] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 7.363] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 7.363] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 7.363] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 7.363] (II) AIGLX: Loaded and initialized nouveau
[ 7.363] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 7.365] (II) NOUVEAU(0): NVEnterVT is called.
[ 7.420] (II) NOUVEAU(0): Setting screen physical size to 508 x 285
[ 7.420] resize called 1920 1080
[ 7.445] (II) Using input driver 'evdev' for 'Logitech-Illuminated'
[ 7.445] (**) Option "CoreKeyboard"
[ 7.445] (**) Logitech-Illuminated: always reports core events
[ 7.445] (**) evdev: Logitech-Illuminated: Device: "/dev/input/by-id/usb-Logitech_Logitech_Illuminated_Keyboard-event-kbd"
[ 7.503] (--) evdev: Logitech-Illuminated: Vendor 0x46d Product 0xc318
[ 7.503] (--) evdev: Logitech-Illuminated: Found keys
[ 7.503] (II) evdev: Logitech-Illuminated: Configuring as keyboard
[ 7.503] (II) XINPUT: Adding extended input device "Logitech-Illuminated" (type: KEYBOARD, id 6)
[ 7.503] (**) Option "xkb_rules" "evdev"
[ 7.503] (**) Option "xkb_model" "pc104"
[ 7.503] (**) Option "xkb_layout" "fr"
[ 7.513] (II) Using input driver 'evdev' for 'Logitech-G100S'
[ 7.513] (**) Option "CorePointer"
[ 7.513] (**) Logitech-G100S: always reports core events
[ 7.513] (**) evdev: Logitech-G100S: Device: "/dev/input/by-id/usb-Logitech_G100s_Optical_Gaming_Mouse-event-mouse"
[ 7.583] (--) evdev: Logitech-G100S: Vendor 0x46d Product 0xc247
[ 7.583] (--) evdev: Logitech-G100S: Found 12 mouse buttons
[ 7.583] (--) evdev: Logitech-G100S: Found scroll wheel(s)
[ 7.583] (--) evdev: Logitech-G100S: Found relative axes
[ 7.583] (--) evdev: Logitech-G100S: Found x and y relative axes
[ 7.583] (II) evdev: Logitech-G100S: Configuring as mouse
[ 7.583] (II) evdev: Logitech-G100S: Adding scrollwheel support
[ 7.583] (**) Option "Emulate3Buttons" "no"
[ 7.583] (**) evdev: Logitech-G100S: YAxisMapping: buttons 4 and 5
[ 7.583] (**) evdev: Logitech-G100S: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 7.583] (II) XINPUT: Adding extended input device "Logitech-G100S" (type: MOUSE, id 7)
[ 7.583] (II) evdev: Logitech-G100S: initialized for relative axes.
[ 7.583] (**) Logitech-G100S: (accel) keeping acceleration scheme 1
[ 7.583] (**) Logitech-G100S: (accel) acceleration profile 0
[ 7.583] (**) Logitech-G100S: (accel) acceleration factor: 2.000
[ 7.583] (**) Logitech-G100S: (accel) acceleration threshold: 4
[ 7.584] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 7.584] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.584] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.584] (**) Power Button: Applying InputClass "system-keyboard"
[ 7.584] (II) Using input driver 'evdev' for 'Power Button'
[ 7.584] (**) Power Button: always reports core events
[ 7.584] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 7.584] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 7.584] (--) evdev: Power Button: Found keys
[ 7.584] (II) evdev: Power Button: Configuring as keyboard
[ 7.584] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
[ 7.584] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 7.584] (**) Option "xkb_rules" "evdev"
[ 7.584] (**) Option "xkb_model" "pc104"
[ 7.584] (**) Option "xkb_layout" "fr"
[ 7.584] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 7.584] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 7.584] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 7.584] (**) Video Bus: Applying InputClass "system-keyboard"
[ 7.584] (II) Using input driver 'evdev' for 'Video Bus'
[ 7.584] (**) Video Bus: always reports core events
[ 7.584] (**) evdev: Video Bus: Device: "/dev/input/event11"
[ 7.584] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 7.584] (--) evdev: Video Bus: Found keys
[ 7.584] (II) evdev: Video Bus: Configuring as keyboard
[ 7.584] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14/event11"
[ 7.584] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[ 7.584] (**) Option "xkb_rules" "evdev"
[ 7.584] (**) Option "xkb_model" "pc104"
[ 7.584] (**) Option "xkb_layout" "fr"
[ 7.584] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 7.584] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.584] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.584] (**) Power Button: Applying InputClass "system-keyboard"
[ 7.584] (II) Using input driver 'evdev' for 'Power Button'
[ 7.584] (**) Power Button: always reports core events
[ 7.584] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 7.584] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 7.584] (--) evdev: Power Button: Found keys
[ 7.584] (II) evdev: Power Button: Configuring as keyboard
[ 7.584] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event0"
[ 7.584] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 10)
[ 7.584] (**) Option "xkb_rules" "evdev"
[ 7.584] (**) Option "xkb_model" "pc104"
[ 7.584] (**) Option "xkb_layout" "fr"
[ 7.585] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event15)
[ 7.585] (II) No input driver specified, ignoring this device.
[ 7.585] (II) This device may have been added with another device file.
[ 7.585] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
[ 7.585] (II) No input driver specified, ignoring this device.
[ 7.585] (II) This device may have been added with another device file.
[ 7.585] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event17)
[ 7.585] (II) No input driver specified, ignoring this device.
[ 7.585] (II) This device may have been added with another device file.
[ 7.585] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event18)
[ 7.585] (II) No input driver specified, ignoring this device.
[ 7.585] (II) This device may have been added with another device file.
[ 7.585] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event12)
[ 7.585] (II) No input driver specified, ignoring this device.
[ 7.585] (II) This device may have been added with another device file.
[ 7.585] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event13)
[ 7.585] (II) No input driver specified, ignoring this device.
[ 7.585] (II) This device may have been added with another device file.
[ 7.585] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event14)
[ 7.585] (II) No input driver specified, ignoring this device.
[ 7.585] (II) This device may have been added with another device file.
[ 7.585] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4024 (/dev/input/event23)
[ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev pointer catchall"
[ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev keyboard catchall"
[ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev pointer catchall"
[ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev keyboard catchall"
[ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "system-keyboard"
[ 7.585] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4024'
[ 7.585] (**) Logitech Unifying Device. Wireless PID:4024: always reports core events
[ 7.585] (**) evdev: Logitech Unifying Device. Wireless PID:4024: Device: "/dev/input/event23"
[ 7.585] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Vendor 0x46d Product 0xc52b
[ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found 20 mouse buttons
[ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found scroll wheel(s)
[ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found relative axes
[ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found x and y relative axes
[ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found absolute axes
[ 7.586] (II) evdev: Logitech Unifying Device. Wireless PID:4024: Forcing absolute x/y axes to exist.
[ 7.586] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found keys
[ 7.586] (II) evdev: Logitech Unifying Device. Wireless PID:4024: Configuring as mouse
[ 7.586] (II) evdev: Logitech Unifying Device. Wireless PID:4024: Configuring as keyboard
[ 7.586] (II) evdev: Logitech Unifying Device. Wireless PID:4024: Adding scrollwheel support
[ 7.586] (**) evdev: Logitech Unifying Device. Wireless PID:4024: YAxisMapping: buttons 4 and 5
[ 7.586] (**) evdev: Logitech Unifying Device. Wireless PID:4024: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 7.586] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.1/1-11.1:1.2/0003:046D:C52B.0006/0003:046D:C52B.0008/input/input26/event23"
[ 7.586] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4024" (type: KEYBOARD, id 11)
[ 7.586] (**) Option "xkb_rules" "evdev"
[ 7.586] (**) Option "xkb_model" "pc104"
[ 7.586] (**) Option "xkb_layout" "fr"
[ 7.586] (II) evdev: Logitech Unifying Device. Wireless PID:4024: initialized for relative axes.
[ 7.586] (WW) evdev: Logitech Unifying Device. Wireless PID:4024: ignoring absolute axes.
[ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: (accel) keeping acceleration scheme 1
[ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: (accel) acceleration profile 0
[ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: (accel) acceleration factor: 2.000
[ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: (accel) acceleration threshold: 4
[ 7.586] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4024 (/dev/input/mouse1)
[ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "system-keyboard"
[ 7.586] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4024'
[ 7.586] (**) Logitech Unifying Device. Wireless PID:4024: always reports core events
[ 7.586] (**) evdev: Logitech Unifying Device. Wireless PID:4024: Device: "/dev/input/mouse1"
[ 7.586] (EE) evdev: Logitech Unifying Device. Wireless PID:4024: Unable to query fd: Inappropriate ioctl for device
[ 7.630] (EE) PreInit returned 2 for "Logitech Unifying Device. Wireless PID:4024"
[ 7.630] (II) UnloadModule: "evdev"
[ 7.630] (II) config/udev: Adding input device HD Webcam C525 (/dev/input/event25)
[ 7.630] (**) HD Webcam C525: Applying InputClass "evdev keyboard catchall"
[ 7.630] (**) HD Webcam C525: Applying InputClass "evdev keyboard catchall"
[ 7.630] (**) HD Webcam C525: Applying InputClass "system-keyboard"
[ 7.630] (II) Using input driver 'evdev' for 'HD Webcam C525'
[ 7.630] (**) HD Webcam C525: always reports core events
[ 7.630] (**) evdev: HD Webcam C525: Device: "/dev/input/event25"
[ 7.630] (--) evdev: HD Webcam C525: Vendor 0x46d Product 0x826
[ 7.630] (--) evdev: HD Webcam C525: Found keys
[ 7.630] (II) evdev: HD Webcam C525: Configuring as keyboard
[ 7.630] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.2/1-11.2.1/1-11.2.1:1.2/input/input28/event25"
[ 7.630] (II) XINPUT: Adding extended input device "HD Webcam C525" (type: KEYBOARD, id 12)
[ 7.630] (**) Option "xkb_rules" "evdev"
[ 7.630] (**) Option "xkb_model" "pc104"
[ 7.630] (**) Option "xkb_layout" "fr"
[ 7.630] (II) config/udev: Adding input device Microsoft X-Box 360 pad (/dev/input/event24)
[ 7.630] (II) No input driver specified, ignoring this device.
[ 7.630] (II) This device may have been added with another device file.
[ 7.630] (II) config/udev: Adding input device Microsoft X-Box 360 pad (/dev/input/js1)
[ 7.630] (II) No input driver specified, ignoring this device.
[ 7.630] (II) This device may have been added with another device file.
[ 7.630] (II) config/udev: Adding input device Logitech Logitech(R) Precision(TM) Gamepad (/dev/input/event22)
[ 7.630] (II) No input driver specified, ignoring this device.
[ 7.630] (II) This device may have been added with another device file.
[ 7.630] (II) config/udev: Adding input device Logitech Logitech(R) Precision(TM) Gamepad (/dev/input/js0)
[ 7.630] (II) No input driver specified, ignoring this device.
[ 7.630] (II) This device may have been added with another device file.
[ 7.631] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event19)
[ 7.631] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
[ 7.631] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
[ 7.631] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "system-keyboard"
[ 7.631] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
[ 7.631] (**) Logitech Logitech Illuminated Keyboard: always reports core events
[ 7.631] (**) evdev: Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event19"
[ 7.631] (WW) evdev: Logitech Logitech Illuminated Keyboard: device file is duplicate. Ignoring.
[ 7.663] (EE) PreInit returned 8 for "Logitech Logitech Illuminated Keyboard"
[ 7.663] (II) UnloadModule: "evdev"
[ 7.663] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event20)
[ 7.663] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
[ 7.663] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
[ 7.663] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "system-keyboard"
[ 7.663] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
[ 7.663] (**) Logitech Logitech Illuminated Keyboard: always reports core events
[ 7.663] (**) evdev: Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event20"
[ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Vendor 0x46d Product 0xc318
[ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Found 1 mouse buttons
[ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Found scroll wheel(s)
[ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Found relative axes
[ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: Forcing relative x/y axes to exist.
[ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Found absolute axes
[ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: Forcing absolute x/y axes to exist.
[ 7.663] (--) evdev: Logitech Logitech Illuminated Keyboard: Found keys
[ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as mouse
[ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as keyboard
[ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: Adding scrollwheel support
[ 7.663] (**) evdev: Logitech Logitech Illuminated Keyboard: YAxisMapping: buttons 4 and 5
[ 7.663] (**) evdev: Logitech Logitech Illuminated Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 7.663] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.1/0003:046D:C318.0002/input/input23/event20"
[ 7.663] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD, id 13)
[ 7.663] (**) Option "xkb_rules" "evdev"
[ 7.663] (**) Option "xkb_model" "pc104"
[ 7.663] (**) Option "xkb_layout" "fr"
[ 7.663] (II) evdev: Logitech Logitech Illuminated Keyboard: initialized for relative axes.
[ 7.663] (WW) evdev: Logitech Logitech Illuminated Keyboard: ignoring absolute axes.
[ 7.663] (**) Logitech Logitech Illuminated Keyboard: (accel) keeping acceleration scheme 1
[ 7.663] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration profile 0
[ 7.663] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration factor: 2.000
[ 7.663] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration threshold: 4
[ 7.663] (II) config/udev: Adding input device Logitech G100s Optical Gaming Mouse (/dev/input/event21)
[ 7.663] (**) Logitech G100s Optical Gaming Mouse: Applying InputClass "evdev pointer catchall"
[ 7.663] (**) Logitech G100s Optical Gaming Mouse: Applying InputClass "evdev pointer catchall"
[ 7.664] (II) Using input driver 'evdev' for 'Logitech G100s Optical Gaming Mouse'
[ 7.664] (**) Logitech G100s Optical Gaming Mouse: always reports core events
[ 7.664] (**) evdev: Logitech G100s Optical Gaming Mouse: Device: "/dev/input/event21"
[ 7.664] (WW) evdev: Logitech G100s Optical Gaming Mouse: device file is duplicate. Ignoring.
[ 7.690] (EE) PreInit returned 8 for "Logitech G100s Optical Gaming Mouse"
[ 7.690] (II) UnloadModule: "evdev"
[ 7.690] (II) config/udev: Adding input device Logitech G100s Optical Gaming Mouse (/dev/input/mouse0)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.690] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.690] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event7)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.690] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event8)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.690] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event9)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.690] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event10)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.690] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event4)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.690] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event5)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.690] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event6)
[ 7.690] (II) No input driver specified, ignoring this device.
[ 7.690] (II) This device may have been added with another device file.
[ 7.691] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 7.691] (II) No input driver specified, ignoring this device.
[ 7.691] (II) This device may have been added with another device file.
[ 14.821] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
[ 14.821] (II) NOUVEAU(0): Using hsync ranges from config file
[ 14.821] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 14.821] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 14.821] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 14.821] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 14.821] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 14.963] resize called 3840 1080
[ 15.466] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
[ 15.466] (II) NOUVEAU(0): Using hsync ranges from config file
[ 15.466] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 15.466] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 15.466] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 15.466] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 15.466] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 15.747] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
[ 15.747] (II) NOUVEAU(0): Using hsync ranges from config file
[ 15.747] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 15.747] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 15.747] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 15.747] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 15.747] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 15.947] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
[ 15.947] (II) NOUVEAU(0): Using hsync ranges from config file
[ 15.947] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 15.947] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 15.947] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 15.947] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 15.947] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 16.180] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
[ 16.180] (II) NOUVEAU(0): Using hsync ranges from config file
[ 16.180] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 16.180] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 16.180] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 16.180] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 16.180] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 16.398] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
[ 16.398] (II) NOUVEAU(0): Using hsync ranges from config file
[ 16.398] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 16.398] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 16.398] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 16.398] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 16.398] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 16.705] (II) NOUVEAU(0): EDID vendor "SAM", prod id 1246
[ 16.705] (II) NOUVEAU(0): Using hsync ranges from config file
[ 16.705] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 16.705] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 16.705] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP)
[ 16.705] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 16.705] (II) NOUVEAU(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 3613.510] (II) config/udev: removing device Logitech Unifying Device. Wireless PID:4024
[ 3613.557] (II) evdev: Logitech Unifying Device. Wireless PID:4024: Close
[ 3613.557] (II) UnloadModule: "evdev"
[ 3613.617] (II) config/udev: removing device HD Webcam C525
[ 3613.647] (II) evdev: HD Webcam C525: Close
[ 3613.647] (II) UnloadModule: "evdev"
[ 3614.988] (II) config/udev: Adding input device Logitech Logitech(R) Precision(TM) Gamepad (/dev/input/js0)
[ 3614.988] (II) No input driver specified, ignoring this device.
[ 3614.988] (II) This device may have been added with another device file.
[ 3614.988] (II) config/udev: Adding input device Logitech Logitech(R) Precision(TM) Gamepad (/dev/input/event23)
[ 3614.988] (II) No input driver specified, ignoring this device.
[ 3614.988] (II) This device may have been added with another device file.
[ 3614.989] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4024 (/dev/input/mouse1)
[ 3614.989] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "system-keyboard"
[ 3614.989] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4024'
[ 3614.989] (**) Logitech Unifying Device. Wireless PID:4024: always reports core events
[ 3614.989] (**) evdev: Logitech Unifying Device. Wireless PID:4024: Device: "/dev/input/mouse1"
[ 3614.989] (EE) evdev: Logitech Unifying Device. Wireless PID:4024: Unable to query fd: Inappropriate ioctl for device
[ 3615.023] (EE) PreInit returned 2 for "Logitech Unifying Device. Wireless PID:4024"
[ 3615.023] (II) UnloadModule: "evdev"
[ 3615.023] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4024 (/dev/input/event22)
[ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev pointer catchall"
[ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev keyboard catchall"
[ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev pointer catchall"
[ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "evdev keyboard catchall"
[ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: Applying InputClass "system-keyboard"
[ 3615.023] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4024'
[ 3615.023] (**) Logitech Unifying Device. Wireless PID:4024: always reports core events
[ 3615.023] (**) evdev: Logitech Unifying Device. Wireless PID:4024: Device: "/dev/input/event22"
[ 3615.023] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Vendor 0x46d Product 0xc52b
[ 3615.023] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found 20 mouse buttons
[ 3615.023] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found scroll wheel(s)
[ 3615.023] (--) evdev: Logitech Unifying Device. Wireless PID:4024: Found relative axes
[ 3615.02shillshocked wrote:Since version 1.12, LightDM now relies on systemd-logind for seat
management. It means LightDM van load seats automatically as they are added
from logind.
Ha! I searched something like that during my investigations, I was wondering if it wasn't about the recent logind changes, but I gave up due to the lack of documentation
Maybe you are looking for
-
Withholding tax calculation with formula base problem
Dear all, I maintained some formula depend on client requirement. for example: up to 200,000.00 no withholding tax 2 lax to500,000.00 <1.00 %> tax
-
Navigate to a page with this.pageNum
Hi, I have a 3D PDF and I have added several other pages with normal text to this pdf. The 3D Media is on the first page. Now I'd like to navigate from the first page with Javascript to an other page. this.pageNum = 3; works for all pages except the
-
What's the deal with Intel and the new kernel?
Hi I have trouble understanding the whole deal behind Intel's video drivers and the new kernel. What doesn't work and why? Could someone please try to explain what the problem is in a way so that a newbie like me can understand it? Thanks
-
Hi Friends, When I click on "bank Information" or "Personal Data" I get the error: The ASSERT condition was violated., error key: RFC_ERROR_SYSTEM_FAILURE For the "Address" it's fine, Any idea on this error? Your help is much appreciated. Sathya
-
Testing Objects in Integration Directory
Hi All, How can we test our configuration directory objects? I cant see any test configuration option under tools menu. Regards rahul