Youtube upgrading to flash 9?

will youtube upgrade their site now that FP9 is out?

Try this:
Go to the Quicktime Preference settings. Under the Advance Tab, MIME settings...Miscellaneous, uncheck Flash media.

Similar Messages

  • Macbook 2007 is totally after slow after upgrading Adobe Flash for Safari

    Last month I replaced the (failed) hard drive of my 2007 Macbook with a new 500 GB HD. Everything was great until I attempted to upgrade to the latest version of Adobe Flash player for safari. After uninstalling the old flash player I found it impossible to add the new one--or any other version. I decided to give up for a while until I could go into Apple for advice. I used chrome to watch Youtube, but the videos were totally choppy--freezing and suddenly speeding up--But the real worry is that the entire system is slow slow slow with endless beach balls. I've used utility first aid, Clean mymac, iboost, and tiddyup--each time things seemed better (or not as bad) but I still got beachballs and videos still impossible to watch. I also tried a suggested fix that involved pressing control>command>P.R while powering up. Today I managed to finally upgrade the flash player after upgrading to the newest version of Safari. But videos just as bad and still super slow with beach balls. I would greatly appreciate any new suggestions. Maybe the new HD is defect? I also upgraded to Snow Leopard last year. Thanks!

    See:
    How to eliminate slow Mac problems,
    Mac Maintenance Quick Assist,
    Mac OS X speed FAQ,
    Speeding up Macs,
    How to Speed up Macs,
    Macintosh OS X Routine Maintenance,
    Mac troubleshooting: What to do when your computer is too slow,
    Essential Mac Maintenance: Get set up,
    Essential Mac Maintenance: Rev up your routines,
    Maintaining OS X, 
    Five Mac maintenance myths, and
    Myths of required versus not required maintenance for Mac OS X for information.
    27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

  • Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK

    Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK with plug-in keyboard and mouse

    Hi, Derek -
    ...the screen splits into 4 areas and open windows seperate and shrink.
    Sounds like Spaces is being activated somehow. With the wired keyboard and mouse in use, select the Exposé & Spaces control pane in System Preferences, click the choice in that pane for Spaces. See what the settings are. There are some activation settings in that pane - by default, F8 activates it.
    It could be that the bluetooth keyboard has some stuck keys and is activating Spaces; or that the activation command has somehow been reset to something that the bluetooth mouse, or bluetooth itself, is triggering.

  • Just upgraded to 10.6.8.  Had to upgrade Adobe flash player.  Now can't get any sound from websites!

    Just upgraded to 10.6.8.  Had to upgrade Adobe flash player.  Now can't get any sound from websites.  Advice please!

    Check System Preferences > Flash Player > Advanced
    Click:  Delete All under Browsing Data and Settings
    Then empty the Safari cache.
    From your Safari menu bar click Safari > Preferences then select the Advanced tab.
    Select:  Show develop menu in menu bar
    Now click Develop > Empty Caches
    Quit and relaunch Safari then try Flash on a website for sound.

  • Flex components not working after upgrade to Flash Builder 4

    I just purchased Flash Builder 4 and imported my project from Flex Builder 3. Everything worked except my Flex components that were created in Flash Professional using the Flex Compoent Kit are not showing up at all in my Flex app. The components were created in Flash CS3 and published to an SWC. I even tried upgrading to Flash Professional CS5 and re-publishing but that didn't help. These components work fine in Flex Builder 3 with Flex SDK 3.2. Does anyone know why they aren't showing up in Flash Builder 4 using Flex SDK 4.1 and AIR 2.5 SDK? I need this to work with AIR SDK 2.5 so I can compile for Android. Thanks, Ryan.

    P.S. when I say they aren't showing up I mean they aren't visible in the running application. Flash Builder is finding them in the SWC though because I instantiate the components in my mxml file and it compiles without errors. - Ryan

  • Problems with remoting upon upgrade to Flash 8

    I have had a fully functional flash remoting page with Flash
    MX 2004.
    I recently upgraded to Flash 8 (behind the times I know)
    When I modified the Flash slightly the page stopped working.
    Flash 8 could not locate my NetServices.as file or NetDebug
    file when I test my movie.
    The error message I get is as follows:
    include file NetServices.as: File not found.
    #include "NetServices.as"
    include file NetDebug.as: File not found.
    #include "NetDebug.as"
    Following the advice else where in these forums I have
    changed the
    #include "NetServices.as"
    to
    import mx.remoting.*;
    and
    #include "NetDebug.as"
    to
    import mx.remoting.debug.*;
    however both generate a syntax error when I try to test the
    movie.
    Any suggestions would be appreciated.

    Call me a dummy
    that was exactly the issue and I'd been looking for
    something more complicated
    However I am now having some problems converting what had
    been a fully functional action script file called DataGlue.as into
    a compatible format.
    Any suggestions where I can go to find advice about
    converting across?

  • Upgrade from Flash player 7 to Flash Player 9

    I have two website with many Flash image with url. When the
    users upgraded from Flash player 7 to Flash Player 9, the links
    don't work. I uninstalled the version 9 and installed version 7
    again and the website works fine. Help me please!!!

    I have tried for 2 days to get the latest version of Flash
    player to download and nothing works. I've done everything that was
    suggested, I believe.
    I would appreciate any help that I can get in installing this
    as I cannot see any videos at all in websites. I don't understand
    why it isn't working.

  • I have been unable to upgrade adobe flash player software.

    I am using a recently purchase MacBook Air running Yosemite 10.10.1. Upon receiving a warning that I needed to upgrade Adobe Flash Player Software, I down loaded  and installed the latest version several times. I still, however, continue to receive the "Need to Upgrade" message when trying to view online videos.

    A genuine alert that Flash is outdated and blocked is shown on this page. Follow the instructions on the page in that case. Otherwise, the alert is fake and someone is trying to scam you into installing malware. If you see fake update alerts on more than one website, ask for instructions.

  • Youtube video requiring Flash Player

    Some of Youtube video requires Flash Player. I installed it successfully, but I still encounter the same error message. It appears that I have not installed ActiveX control. How do I install it. BTW, is the ActiveX control the issue here or somethingelse is going on?

    Hi,
    Please check the below mentioned knowledge base article and follow the instructions
    http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html

  • Issue in registration of my upgrade to Flash MX

    Been using Flash for years.. Now see registration needed.   Flash 4 and my upgrade to Flash MX neither serial numbers work in Adobe's system..  I see Adobe dropped registration for Flash 4...  Not found where Flash MX 2004 is not available.  But serial number does not work I assume because it is an upgrade to Flash 4.     If I by a new version of Macromedia Studio 8 will it be registrable are is only the CC version supported.

    Macromedia Legacy Product Actvation Issues
    http://helpx.adobe.com/x-productkb/policy-pricing/macromedia-legacy-activation-error.html
    Adobe doesn't sell older versions of their software so if you were to try to buy Flash from Studio 8 you'd be doing so thru some unknown third party vendor.
    Adobe still sells their CS6 software in addition to their Cloud subscriptions.
    Purchase CS6 products:
    http://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html

  • I am unable to see videos on amazon prime because it says I need to upgrade th Flash player ...which

    I am unable to see videos on amazon prime because it says I need to upgrade the Flash player ...which I have done many times, still is not working. I have MAC  os x  10.5.8*
    Can you help me?

    What version of Flash Player do you have installed?
    http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html

  • Why do websites still ask me to upgrade my Flash Player when I have version 11?

    I have downloaded Flash Player 11 a few times now and still get a message asking me to upgrade my Flash Player. Why????

    Downloading is not enough, you also need to install it!
    If you still need help, please specify your operating system & version & editition, as well as your browser.

  • How to add youtube video to flash

    I am still new to AS. Looking for a detailed tutorial/explanation on adding/embeding  a youtube video to flash.
    If anybody has a descent example that would work too. Also i would like the youtube video to play in the flash file.

    http://code.google.com/apis/youtube/flash_api_reference.html
    Quote from google api ref:
    Getting Started
    You can use a chromeless player or an embedded player in your  application. Both players support the same functions. However, the  embedded player displays standard controls, including a play/pause  button, a progress bar, a volume control, and more. The chromeless  player, on the other hand, does not display any controls, so you will  need to develop your own custom player controls in Flash.
    Loading the chromeless player
    If your application is using a chromeless player, use the  following URL to load the player in your application:
    http://www.youtube.com/apiplayer?version=3
    Loading the embedded player
    If your application is using an embedded player, use the  following URL to load the player in your application. In the URL,  replace the string VIDEO_ID with the 11-character YouTube video ID of the  video that the player will show.
    http://www.youtube.com/v/VIDEO_ID?version=3
    The
    Player  API demo lets you compare the two player
    http://code.google.com/apis/youtube/youtube_player_demo.html
    http://www.youtube.com/v/VIDEO_ID?version=3
    Heres some really quick code. You'll have to play with it but this will get you well under way:
    var myVideo:Loader = new Loader();
    Security.allowDomain("www.youtube.com");
    myVideo.contentLoaderInfo.addEventListener(Event.COMPLETE, showVideo);
    //myVideo.load(new URLRequest("http://www.youtube.com/apiplayer?version=3"));
    myVideo.load(new URLRequest("http://www.youtube.com/v/6U-sTcbZuq0&feature=rec-LGOUT-farside_rn-4r-1-HM" + "?version=3"));
    function showVideo(e:Event):void
         myVideo.x = stage.stageWidth * .5;
         myVideo.y = stage.stageWidth * .5;
         stage.addChild(myVideo);
    If you have any questions please let me know. Otherwise, please mark the question as answered Thanks,
    Jesse

  • I have licensed version of Flash Builder with Master Collection CS5.5 how to upgrade to Flash Builder 4.7

    Did not take advantage of the free upgrade awhile back and need to upgrade my Flash Builder 4.6 licensed in Master Collection 5.5 to version 4.7.
    My serial is not working from my MC5.5 and my individual license from my Flash Builder is not working.
    Any ideas on to solve this issue?
    Tried to purchase an upgrade on their site but cannot find one that will let me upgrade from 4.6 to 4.7.

    No. You'll either have to pay for CS6 at full price. Or you'll need a subscription to the Creative Cloud. I highly recommend the latter.

  • Pls, help me how to install or upgrade adobe flash palyer?

    When i see a clip video on website, they ask met upgrade adobe flash palyer, i try to upgrade but it didn't work cause it's not compatible with ios ,
    Please help me how to use adobe flash player on my ipad2?

    I have not tried any Flash substitute for iPad.
    You can post your question in the iPad community for prompt help.
    https://discussions.apple.com/community/ipad/using_ipad
    Here are some of the threads dealing with the issue.
    https://discussions.apple.com/search.jspa?peopleEnabled=true&userID=&containerTy pe=&container=&spotlight=true&q=ipad+flash+substitute

Maybe you are looking for