YouTube upload not possible

I want to upload my video to YouTube, but it appears a warning called "no interface".
How can I upload videos directly to YouTube?

See the FAQ entry How can I get the best quality video on YouTube? and see if that helps.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Similar Messages

Tariff scheme was created manually - upload not possible

Hi guys
I tried to upload german import numbers (purchased from BANZ provider). I used transaction /SAPSLL/LLNS_UPL101
Unfortunately I am getting the error message 'Scheme was created manually - upload not possible'
This scheme was already in the system (I guess it's standard) - how to deal with that?
For sure I need to delete an entry somewhere in the customizing - but where???
Your help is very appreciated..Thanks in advance!
Best regards
t.

Hi Tsunami,
If you maintained data manually and then after trying import from official XMLs you get this error.
Please clear these tables for your CTS scheme :
/SAPSLL/CTSNUM
/SAPSLL/CTSNUMT
/SAPSLL/CTSGEN
/SAPSLL/CTSGENT
or set field CREO in these tables to a value (for all commodity/tarrif codes) that will allow upload.
Probably a small ABAP report will help you in the fastest way.
Hope this helps,
Branislav Petricek
Edited by: Branko Petricek on Aug 2, 2011 2:54 PM

Why is my YouTube upload not working in CC 2014.0.1?

I understand that the MOOV Atom issue was supposed to be fixed in the new version of PPro/AME released yesterday.
New to the issue? The MOOV (or Movie) Atom is a piece of metadata that belongs at the very top of a streaming MP4 file. In the previous iteration of PPro/AME, the YouTube upload was a two-pass VBR process and it put the MOOV atom at the END of the file; a third-party software, MP4 FastStart, was required to move the MOOV. Then, YouTube uploads went without a hitch.
"Without a hitch" means: YouTube acknowledges your upload and delivers the URL at which the video will appear when finished.
There is NO "Video/Audio Quality" warning! That warning, indicating that the video you're uploading is not a streaming video, is a sign of trouble.
I upload a 1 1/2 minute file and it appears to work perfectly i.e. no warning messages.
However, when I upload the full 2 hours 15 minutes, it warns. The warning is not without teeth: my first upload of my large video was still not ingested and processed by YouTube after 4 hours. It would display...but this lovely work that I had uploaded at 1080p was showing in 360p.
An additional issue is that the bit rate (8Mbps in the older version) has been bumped up to 16, making for huge upload files (literally double). Even after cutting the bit rate back in half to 8, it warns; I didn't complete the upload but suspect it still would not display properly.
I'm now uploading the work separately by act (1 hour 15 and 1 hour for the two acts, respectively). If that doesn't work, I will need to uninstall and carefully re-install the software, not allowing the update to install (I'm told by TS that this is possible), and then get my work done. I'd obviously rather not have to do that. I'll actually do the uploads to YouTube this time and see if they process fully, whether or not I get the "Audio/Video Quality" message in the beginning.
If anyone has any ideas (other than pointing out to the engineers via bug report that they seem to have messed up) I'm eager to hear.
Jay

Hi,
Please check this.
please have a look into this :
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename =
FILETYPE = 'ASC'** HAS_FIELD_SEPARATOR = ' '
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
tables
data_tab =
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
you have file type here , just give the type whether XLS or CSV format or whatever.

Stock upload not possible thru MB1C.

Hi Sap Gurus,
Please help me to solve issue in delivery. I can't upload stock through MB1C. It shows the follwing massage......*Account Determination for entry INT GBB_BSA3100 not possible
Massage no--M8147
Digonisys--
The system didn't find an account for this transaction. This means that the account determination for the key INT GBB_ 3100 is not maintained in MM customization(valuation). The key is node of
-Chart of account
-Transaction Key(=Position indicator)
-Valuation Group code
-Account grouping code'
-Valaution class
System Response
The system can not update G/L A/c for this transaction. U can't post the transaction.
Procedure
Check Account Determination in Customizing for Valuation.
Note- The relevent Posting transaction can be found in Table T030A.
I have Material of Trading Goods (HAWA) with valuation class 3100 which is properly maintained in material master.
Need ur help at earliest !!

Dear Arindam,
Could you pls share me how did you solve the above issue and i am also getting same error while uploading initial stock with move ment type 561 in MB1C.
i had maintained same plant and same storage location.
Awaiting for experts inputs on the same.
Regards,
PJR

Youtube uploading not working?

I tried the one-click youtube upload option and it says that my name/password are incorrect. I definitely have IE cookies open and the name/password for the youtube account is correct. any idea what the problem is? Also, I notice the size for a .5 minute movie was over 00mb. Any suggestions on how to crop it down easily without too much quality loss? I was under the impression that youtube mode did this, but I can't get that to work.

Ok,
Got vado central youtube uploader to work.
Here is the issue, at least when using?Internet Explorer v8:
Go to menu bar,?tools, internet options, advanced tab, security section, the "check for server certificate revocation*" needs to be off instead of on.
Close internet explorer and re-open so it takes effect. Then youtube uploaders works.
Not sure why this is an issue using vado central youtube uploader and probably a bug as every other youtube uploader I have used with other software products has no trouble when "certificate revocation" is on

Youtube Uploader Not Working on Snow Leopard???

I upload lots of things to Youtube and as of installing Snow Leopard on friday, I have not been able to upload anything at all. When you click the youtube uploader it says "loading" where the uploader normally appears and nothing happens. When you click the Bulk Uploader and click "add video" nothing happens. This is occuring on both firefox and safari. I switched over to my vista partition of bootcamp and it runs perfectly fine so that is the alternative I will have to use until this problem is fixed.
Is anybody else having this issue? if not, how can I fix it? I'm assuming it is something wrong with the operating system as it started happening as soon as I installed it.
I've tried reinstalling adobe flash player, I've rebooted several times, nothing seems to work.

Hey, I fixed it! I remembered (by trying in Firefox, where it works, by the way) that the Youtube Bulk video uploader uses Google Gears. I noticed that Safari had Gears 0.5.30.0 while the latest version I just installed for Firefox was Gears 0.5.32.0. I googled and found an old bug report somewhere saying that in a Snow Leopard beta, Gears worked in Firefox but not Safari, so I knew I was on the right track.
I tried to upgrade Gears in Safari by going to http://gears.google.com, but it did not display anything about which version I had or how to upgrade (as it does in Firefox) although if I looked at the page source I could see the text 'Your Gears installation is too old and needs to be upgraded'. So in the end I just deinstalled Gears (follow the instructions under 'If you need to remove a plug-in' in Safari help) and now I have the button back to upload a video, instead of just 'Loading...' I haven't tried it yet but it looks promising.

Youtube Uploads Not Showing

Hi Guys,
I have shared a couple of videos direct from imovie 08 to youtube.
Everything seemed to go OK, go the message saying it was completed but they never appear in my youtube account.
All the right youtube account details were entered, when I open the movie in imovie it says it was published to youtube....but the videos are not there?
Anyone else have this problem?

UPDATE: I now have my latest YouTube video showing up. Strange....as it showed immediately on every other device but the aptv2. My favorites list is still not updating though. I guess you need to give the system 24 hrs after uploading a new video before aptv will update it.

YouTube upload not in HD

I uploaded HD video to YouTube directly from the Timeline/Project. It won't upoad in HD. The only option I'm given in X when the YouTube dropdown menu appears is Large 540p Video Sharing (852 X 480). The HD settings are grayed out. Why?
The metadata in FCP X says my video is XDCAM EX 1080p30 (35 MB/s).

Then it's probably YouTube - have you checked here to see that you're watching the hi res version? It could be that YouTube is choosing an easier version to display based on your internet connection.
You can see on this screenshot that although the video has up to 1080 specs, my connection is making YouTube show me the 360p version by default.

YouTube does not recognize my ownership of uploaded videos

I have been uploading videos extracted from symphonic wind ensemble concert videos to the YouTube Channel "concord.band.ma" for a few years. Now I can still upload them, but YouTube will not let me delete them or edit their meta-text. I think that I caused the problem by changing a password, but I cannot extract from Premiere Elements 10 the YouTube password that it is successfully using to upload my videos. If it asked me for a password, I could say that I don't remember, and it would go through a security procedure that would eventually get me back in control of my YouTube Channel (which has 130 videos in it). PLEASE HELP.
Dan Diamond

Dan Diamond,
I think what you wrote tells it all in the way to go
Now I can still upload them, but YouTube will not let me delete them or edit their meta-text
This is a YouTube and YouTube user issue, not an Adobe Premiere Elements one.
You need to contact YouTube since it is now in possession of your videos under the YouTube Agreement.
http://www.youtube.com/t/contact_us
That is my take on what you wrote.
And, at the end of your thread introduction, you seem to suggest a logical answer to your own question. I see no way to get from Premiere Elements (any version) a password that you offered for the Online/YouTube upload from the program.
ATR

Error :The function upload is not possible for this documentu2019

Hi,
The users are using Solution manager Help Desk system.
When a specific user tries to create a message from the satellite system, and tries to upload a document, he is unable to do so.
He is getting an error message : 'The function <upload> is not possible for this documentu2019
The message number is BCOS024.
The user is unable to attach word, note pads, excel etc. any types of documents.
He is able to type a description/ title etc and save the message. And the message is reflected in the Solution manager help desk system.
He comes across that message only if he tries to upload an attachment.
Please advice.
Thanks in advance.

Hi Kase,
What version of SAPGUI you use?
We had the same problem.
This problem was solved once we upgraded SAPGUI to 710 Patch Level 11.
Regards,
Sanjai

Upload of a document with arrow "up" is not possible.

Upload of a document with arrow "up" is not possible. The menu opens, but there is all gray and no possibility to click on "upload".
I have to change to lokal site/remote site and there the arrows are activ.
This happens since a have the latest version of Dreamweaver CC 2014

Thank you for the quick answer.
I am referring to the icon „arrows up and down“ in the panel. Right side on the top, next to the icon „Browser“.
I tried CtrlShiftU too. No success. L
Von: MurraySummers
Gesendet: Donnerstag, 6. November 2014 17:20
An: Margot Cane
Betreff: Upload of a document with arrow "up" is not possible.
Upload of a document with arrow "up" is not possible.
created by MurraySummers <https://forums.adobe.com/people/MurraySummers> n Dreamweaver support forum - View the full discussion <https://forums.adobe.com/message/6905675#6905675>

2 Factor Authentication YouTube Uploads.

I have gone to Google and put iMovie in for two factor authentication. When ever I close down iMovie I have to go back to Google revoke the old one and do it again.
So here is the question.
When I put the Authentication code in for Youtube after I create it in Google I am able to upload my video for it logs in.
When i open iMovie again at another time it says invalid or incorrect username and or password.
So let me make sure I am doing this right.
I get the Authentication code from Google.
I enter it into iMovie for Youtube uploads.
When I close the app and come back to iMovie and I to use my Youtube password or the Authenication code.

You've essentially got it right, but I think you're getting confused between the "authentication code" and the "application-specific password". iMovie won't work with an authentication code, you need to create an "application-specific password" in your Google account, and use that in iMovie. (just to be clear, the "authentication code" is the four-digit code that you get in a text message or on your phone app, after you use your regular password. The "application-specific password" is a special password that completely bypassses 2-factor authentication - it's not as secure, but lets you continue using programs like iMovie that don't work with 2-factor authentication).
But the problem is that iMovie won't remember your password between restarts, and Google won't show you what the password is after that first time. There are two possible solutions:
Use "Keychain Access" (or a program like 1Password) on your Mac to securely store your password, you can then retrieve it from Keychain Access and paste it into iMovie the next time you need it (if iMovie did remember your password, this is where it would be stored anyway. You'll find Keychain Access in your "Utilities" folder).
Every time you use iMovie, go into your Google Account and "revoke" the old iMovie password, then create a new one to use in iMovie.
If you go with my 1st suggestion, make sure you always use something like Keychain Access or 1Password to securely store your passwords. Never save it in a text or Word document or a "note taking" app, etc since those are not secure enough for passwords.

Is there a way to save a job action for YouTube upload in Compressor 3.5?

Is there a way to save a job action for YouTube upload? I have about 25 - ten minute clips I want to upload and they all pretty much have the same description and tags. Is there a way to save/make a preset of the job actions that way I don't have to keep inputing the same usernames, passwords, descriptions, tags? Thank you

the method mentioned by benwiggy will certainly work. If you want to an option that would give you more options, you could use a PDF Service. You could then put a specific job on hold while still allowing others to use the printer.
You can do this by opening AppleScript Editor (/Applications/Utilities). You can copy and paste the following into an editor window --
on open printJobs
tell application "Finder"
set trapFile to quoted form of POSIX path of (printJobs as string)
end tell
set defaultPrinter to do shell script "lpstat -d | awk -F: '{print $2}'"
do shell script "lpr -P" & defaultPrinter & " -q " & trapFile
end open
Save the file as an Application. You can name it something like Hold Print Job. Then just put it in the PDF Services directory in the Library directory of your Home folder <yourname>/Library/PDF Services. You may need to make the PDF Services directory as it may not already be there.
Once the file is in place, you can use it by using the PDF drop down menu at the bottom left of a print window. That will send the file to the printer and put it on hold. Others can still use the printer. You can then print your file whenever you want. Just open the print queue as mentioned by benwiggy. Highlight the job that is Paused. You will see a little curly icon at the very right (looks like a reload icon in a web browser). Just click that icon and the job will start printing.

While F-92 posting with T type 210 not possible (No acquisition posted)

Hi
Asset Retirement Not Possible
We have uploded legacy data in our Production server on 01.04.2010.. after that we have to sale one of them asset .
I am using T.code :- F-92 .. but i couldn't sale that and system gives me error
Posting with trans.type 210 not possible (No acquisition posted)
Message no. AA324
Diagnosis
Transaction type 210 belongs to a transaction type group, which can only be used to post to assets to which posting has already been performed. However, no postings have been made to this asset.
Procedure
Use a transaction type from a transaction type group, which can be used for the first acquisition to an asset.
Ajay
yes we are using Group Assets for income tax depreciation
when checked at AS83 no values found under taken over value for the group asset
***. aquistion val - 0
and all other values are zero
Edited by: johnrambo on Oct 4, 2010 12:09 PM
Moderator: Don't repost threads which were locked by moderator

Hi
As I said, go to AS82 and upload the Income tax values for this group asset....
Unless you do that, system wont allow you to proceed.. May be you can enter a nominal value if it is important to sell the asset now and later on correct it
Regards
Ajay M

Asset Retirement (ABAON) error - Posting with trans.type 210 not possible

HI All,
I was trying to sell an asset using transaction ABAON which is fully depreciated, but I am getting the error -
" Posting with trans.type 210 not possible (No acquisition posted)"
The Scenario is, there is an asset(car) which was uploaded during implimentation and it got depreciated fully in the month of april.
The same asset(car, which is fully depreciated) is sold for an amount of Rs 40000/-.
So, I was trying to post it with some revenue vlaue in transaction ABAON, but I am getting the above error.
(The Asset value was an uploaded during implimentation,it was not an acquisition value from SAP. It was an uploaded value from legacy data)
Could any one help in this, or let me know the correct process for this kind of transactions.
Awaiting for a reply.
Regards,
Upendra

HI Mamta,
Thanks for the reply.
While Uploading the data was uploaded as asset balance upload for prior year with value.
Plase let me know what do you propose, to be done for this.
Regards,

YouTube upload not possible

Similar Messages

Maybe you are looking for