YouTube video freezes after resolution is increased or video is expanded. what is the slolution pleas?

While i open YouTube video it freezes after resolution is increased or video is expanded.

Well, I have Mountain Lion and the latest version of Flash (11.8.800.94) installed and I don't see this happening on my system... at all. I just tried to reproduce your issue with no luck.

Similar Messages

FLV video freezes after camera switched on but video *is* in file

I'm baffled and any help would be great. I had an flv recording from a webcam. It mostly recorded fine, but there's one point where I paused the broadcast for an intermission. A few minutes later the broadcast started again but the video doesn't play beyond that point, only audio plays. A few minutes later in the recording the broadcast switched to another camera and the video starts playing again just fine from there.
I can't seek past the frozen point either to skip a couple of seconds ahead. The freeze is at about 9:00. If I seek to 9:01 it jumps ahead 8 minutes to where the camera switches.
What's strange in this is that the video is *definitely* in the file. Using Moyea's FLV Editor Pro I converted the FLV to an MPEG and the whole video is there, so it's not that the camera stopped transmitting, it's just that the playback isn't working.
Any ideas on what might cause this and (more importantly) how I might go about fixing the file?

That's a good thought, but it doesn't seem likely. All that happened was the stream recording was stopped and then, a few minutes later recording was resumed.
After much fussing with it I managed to extract the video data, but there was only one app that could read it. Moyea FLV Editor Pro had no problem reading the data and exporting it to another format. From there I re-encoded it to FLV. But nothing else could read it. FLVCheck found a backwards timestamp, but nothing was able to fix that. I've seen that many times (never exactly sure why) and it hasn't ever caused a problem like this.

Youtube videos freeze after a certain amount of time, but audio continues.

As it says in the title, most Youtube videos freeze after a certain amount of time for me, but the audio continues.
Happens on Firefox, IE and Chrome

This happens mostly because of obsolate drivers.
http://forums.adobe.com/thread/945765?tstart=0

H.264 multi-pass re-encoded video freezes after 10 sec (consistently)

When I take an already encoded H.264/AAC movie and re-encode (to enable the fast-internet streaming option) with the same settings with the "Best Quality (multi-pass)" option enabled, the resulting video freezes after 10 seconds, though the sound continues through the rest of the movie. I have tried this on 3 different movies with the same results. When I change the encoding to "Faster encode (single-pass)", the resulting movie's video frame does NOT freeze at 10 seconds and plays normally. I can reproduce this on any already encoded H.264 movie I wish with the same results.
I have Mac OS X 10.4.8 (PowerPC), 1GB RAM, QT 7.1.3 PRO. I also happen to have DivX 6.2.5 Pro and Flip4Mac 2.1.0.33 Player Pro (though I was not converting anything using those codecs).
Any suggestions? SEEMS to be a QT bug to me... Any one else experiencing this
17 PowerBoook (1.33 GHz) Mac OS X (10.4.8) 1GB RAM
17 PowerBoook (1.33 GHz) Mac OS X (10.4.8) 1GB RAM
17 PowerBoook (1.33 GHz) Mac OS X (10.4.8) 1GB RAM

No need to jump through all of the re-encoding hoops to enable "fast start".
Open the file (whatever format) and use "Save As".
This will place your file into a .mov "container" but the fast start properties will be restored.

Video Freezes after Update to 1.1

Video freezes after 20 seconds of play and then resumes with no audio after upgrading to 1.1.
From what I've read, this seems to be a problem when video has been converted using a third party software. It seems at this point, the only way to remedy the situation is to downgrade to 1.0. Here's how to do it without having to restore your ipod:
http://www.digg.com/apple/Howto_downgrade_to_older(iPod)firmware_WITHOUTrestoring
Just as a note, I called applecare and my technician was clueless about the problem. She was telling me to send it in, but I'm fairly certain that this isn't a hardware problem, just a problem with the upgrade, as people on many other forums are reporting it. In that case, you probably won't get much help calling customer service just yet. Hopefully they'll put a fix out for it soon.
sony vaio Windows XP

Hi,
I had the same problem and downgraded to the lower version. now the video works without any problem, but there seems to be another problem. when I want to eject the ipod from itunes, I get a message, that the iPod cannot be ejected because data on the iPod is currently used by an external program...
any idea...?
Windows XP
UPDATE: AFTER RESTARTING THE PC IT WORKED WITHOUT PROBLEMS!

Incoming Video freezes after a few minutes Using S...

I just installed the Sony BDP-S780 Blu-ray and Sony CMU-BR100 Webcam, skype is working, however the incoming video freezes after a few minutes. The caller on the other side clicks off the video and then back on, it works again but only for a few minutes. Is there a fix for this or am I doing something wrong.

I just installed the Sony BDP-S780 Blu-ray and Sony CMU-BR100 Webcam, skype is working, however the incoming video freezes after a few minutes. The caller on the other side clicks off the video and then back on, it works again but only for a few minutes. Is there a fix for this or am I doing something wrong.

Video freeze after 9 second playing then need to reboot, help?

video freeze after 9 sec play, then need to reboot, help?

video freeze after 9 sec play, then need to reboot, help?

After sending a picture or message in "Message", what causes the "send" button to grey out?

After sending a picture or message in "Message", what causes the "send" button to grey out?

Restore your iPad to the factory settings.

Time Machine stops after reset in OS X 10.9 ? What is the solution ?

Time Machine stops after reset in OS X 10.9 ? What is the solution ?

Time Machine shows the time of the last backup and it shows a MB-count while backing up.
So it seems to work. Only the Time Machine symbol does not work.
Thanks for your tip.
Greetings, AlbertenHelma

Flash-Based BBC h264 Videos Freeze After 8 Seconds

Hello,
I like to view BBC news videos since March on my new Desktop Windows 7 64 bit Pro system. For about 2 weeks now, I've been having trouble viewing about half of these videos. Half play all the way through fine and the other half freeze after 8-10 seconds. I have a CAT 5e 7 mbit cable modem connection so speed is not an issue. My Wi-Fi connected Windows 7 Home Premium laptop uses the same router and can play the same videos with no problems.
On my Desktop, this freezing happens on both FireFox 12 and Internet Explorer 9. I did all the usual things to try to fix the problem. I cleared the caches on both FF12 and IE9. Yesterday, I uninstalled both the Adobe Flash FF12 plug-in and IE9 Active-X versions and reinstalled with the latest version, 11,3,300,262. Today, I upgraded to the latest version, 11,3,300,265. Nothing has solved the problem.
Here are the specs for the BBC Flash-based player:
Problem Videos:
URL: http://www.bbc.co.uk/news/uk-northern-ireland-18819815
EMP v.3.1.0.r749603_749269_749444_5
18819815 | 800kbps | h264 | AK 4.5 (1) | 640x360
URL: http://www.bbc.co.uk/news/world-middle-east-18733664
EMP v.3.1.0.r749603_749269_749444_5
18733664 | 800kbps | h264 | AK 4.5 (1) | 640x360
URL: http://www.bbc.co.uk/news/world-asia-china-18818139
EMP v.3.1.0.r749603_749269_749444_5
18818139 | 800kbps | h264 | AK 4.5 (1) | 640x360
This video plays OK:
URL: http://www.bbc.co.uk/news/world-us-canada-18801596
EMP v.3.1.0.r749603_749269_749444_5
18801601 | 800kbps | h264 | AK 4.5 (1) | 640x360
The only difference I noticed was the initial screen size of the video. On the problem videos, the size is bigger than the OK one. I assume the BBC videos are h264 encoded. On both my Desktop and my laptop, I have 2 msmpeg2vdec.dll files. 1 in C:\Windows\System32 and another in C:\Windows\SysWOW64. They are both v6.1.7140.0. On both my Desktop and laptop, the sizes are different, 2.52 MB & 2.03 MB.
I am using the latest nVidia driver v301.42 which I installed 5/30/2012, over a month ago. The only recent change which happened to my system on 7/4/2012 was my Norton Internet Security 2012 subscription expired. NIS2012 then disabled itself and activated the built-in Windows firewall. 3 days ago I uninstalled NIS2012. I also used the Norton Removal Tool. I then installed a new NIS2012 with a new legitimate key. However, I am still getting this freezing and I don't remember if I got this freezing before 7/4/2012.
On both FF12 and IE9, I can play Hulu, YouTube, Yahoo!, and Amazon videos with no problems. When you right-click on any of these other flash players, nowhere does it say "h264."
My questions are:
1) does the Adobe Flash Player, for both the FF12 plug-in and IE9 ax players, use the Windows7 CODEC?
2) Which file is the h264 CODEC, is it msmpeg2vdec.dll or something else?
3) Will installing a new CODEC pack fix this problem?
4) Is there anything else I have overlooked? Is there anything else I can do to fix this problem?
Thanks.

Interestingly, the advertisement plays correctly. When you right-click on the ad, it does not say h264. I have 2 video cards and several monitors on my Desktop. It might have something to do with that. Otherwise, perhaps one of my other apps did something to the Flash Player h264 playback.
I'm thinking maybe if I upgraded the h264 CODEC, maybe it will play correctly again. CODEC GUIDE has a codec package which I already downloaded but haven't installed yet. I downloaded the "Basic." Unless you really need to, I don't recommend anyone install it. If you want to install a CODEC package, just install the "Basic" package and not one of the bigger packages. I think they make changes to your system. Before installing it, be sure to make a full backup of your Windows system.
http://www.codecguide.com/download_kl.htm

Video freezes after a few seconds

This is actually a continuation of a post I made almost a year and a half ago, trying to get video chat going so my mom can visit with her grandkids. The thread has been archived, so I can't post there but in case it helps here's the address:
http://discussions.apple.com/thread.jspa?threadID=1658017&tstart=0
We are both running Tiger 10.4.11 and iChat AV 3.1.9 (v446), although she's on a 1.25 GHz G4 with 1.5 GB of RAM, and I'm on a 1.8 GHz iMac G5 with 1 GB of RAM. We both have the exact same videocamera, Canon Elura 70, attached via Firewire. Both computers recognize the cameras fine, no problems there.
Anyway, my sister and I have tried 1,000 different things but nothing works. I can always see her but not hear her, and the connection is dropped after a few seconds, saying there's insufficient bandwidth to maintain the conference. She can't see me at all, but she can hear me. The chat usually ends with error -20 and sometimes -22. For instance, here's the log from our try today:
*2010-01-29 11:49:30 -0600: No data has been received for the last 10 seconds.*
*Audio channel info: local machine using 10.0.1.3:16386, expecting remote machine to send to 97.83.147.78:56754*
*Video channel info: local machine using 10.0.1.3:16384, expecting remote machine to send to 97.83.147.78:56752*
*Chat ended with error -20*
*Chat ended with error -20*
*Chat ended with error -22*
*Chat ended with error -22*
The thing is, we can video conference successfully (video and audio) with each other from separate rooms if we're both at her house, as well as from separate rooms when we're both at mine. However, when we're each at our own home, it won't work. She's got a download speed of 8.5, and mine is 8.3. Her upload speed is 1.01 and mine is 1.74.
I am connected through a router - SMC Barricade (SMC7004VBR), and a WebStar modem. We've both taken the tape out of our camera, set our bandwidth limit in iChat to none. System Preferences > Quicktime > Streaming is at 1.5Mbps. I've learned how to access my router settings but I don't see a DoS or SPI setting. It shows firewall features are disabled.
We've also tried to connect with Skype instead, and I was able to see my sister without it freezing. But she couldn't see me, so it still didn't fully work.
I'm totally at a loss. Any ideas?
Edit: Forgot to say her modem is an Ambit U10C018.
Message was edited by: laburke

Wow, thank you so much for the detailed response. I'm actually feeling a little bit of hope that we might get this figured out eventually!
iChat 3.x at both ends.
Can Login and show Buddy Lists
Can Send Visible Invites.
Can Start Video Chat but something says the Bandwidth is then not good enough.
Error Message.
All true, except she has never been able to see me unless we're both in the same my house.
The Intranet /LAN setting in Tiger for iChat 3 also returns Odd figures to
iChat so we have long said set it to 1.5Mbps which your last post says it is.
I take it you must have restarted iChat f not the Mac(s) since you changed
this setting ? (Just covering all bases)
Right.
Have you changed the range the SMC uses to miss the range the modem is using ?
The only change I've made to anything recently is in iChat prefs: Under Accounts - Server settings, I changed the top port to 443 because regular iChat kept disconnecting at odd times and I read somewhere that it might help. But we had this AV problem long before that, and after.
I see the SMC cannot Forward enough ports for iChat but Can do UPnP
(Universal Plug and Play)
Is it set to do UPnP ?
I don't see anything that says UPnP. It says:
GATEWAY
IP Address: 192.168.2.1
Subnet Mask: 255.255.255.0
DHCP Server: Enabled
Firewall: Disabled
On the Port Forward site there are two WebSTARs listed under
Scientic Atlanta
DO you have either of these ?
No, it is a DPC2100.
I could also do with seeing an old log of an Error 20 log.
They are stored in You Home Folder/Library/Logs/iChatConnectionErrors
Can you post the bits down and only down to the line that starts "Binary Images for iChat"
Pasted at bottom of this post.
Can you tell me if there is a Wifi and Ethernet connection to the Router ? (at > the same time )
My husband's PC is connected to the router via Ethernet. The only other things connected to it are the modem and my Airport Express so I can get online with my Macs. (I used to have the iMac connected by Ethernet before I realized I had an Airport card. Duh.)
Thanks so much for your patience and help!
Here's the chat log:
Date/Time: 2010-01-29 14:05:49.036 -0600
OS Version: 10.4.11 (Build 8S165)
Report Version: 4
iChat Connection Log:
AVChat started with ID 2853609893.
0x63bb350: State change from AVChatNoState to AVChatStateWaiting.
Laura Macburke2: State change from AVChatNoState to AVChatStateInvited.
0x63bb350: State change from AVChatStateWaiting to AVChatStateConnecting.
Laura Macburke2: State change from AVChatStateInvited to AVChatStateConnecting.
0x63bb350: State change from AVChatStateConnecting to AVChatStateConnected.
Laura Macburke2: State change from AVChatStateConnecting to AVChatStateConnected.
0x63bb350: State change from AVChatStateConnected to AVChatStateEnded.
2010-01-29 14:05:45 -0600: Participant 0x63bb350: VC connection failed.
Chat ended with error -20
Laura Macburke2: State change from AVChatStateConnected to AVChatStateEnded.
Chat ended with error -20
Video Conference Error Report:
34.059291 @SIP/Transport.c:121 type=4 (00000000/0)
[NOTIFY sip:[email protected]:56754 SIP/2.0
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK6ddeb2cf73f6ce49
Max-Forwards: 70
To: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 3 NOTIFY
Contact: <sip:[email protected]>;isfocus
Event: conference
Subscription-State: terminated;reason=noresource
User-Agent: Viceroy 1.2
Content-Length: 0
32.494025 @:0 type=4 (00000000/0)
[VCNO_REMOTEPACKETS]
[18]
30.067686 @SIP/Transport.c:121 type=4 (00000000/0)
[NOTIFY sip:[email protected]:56754 SIP/2.0
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK6ddeb2cf73f6ce49
Max-Forwards: 70
To: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 3 NOTIFY
Contact: <sip:[email protected]>;isfocus
Event: conference
Subscription-State: terminated;reason=noresource
User-Agent: Viceroy 1.2
Content-Length: 0
26.059537 @SIP/Transport.c:121 type=4 (00000000/0)
[NOTIFY sip:[email protected]:56754 SIP/2.0
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK6ddeb2cf73f6ce49
Max-Forwards: 70
To: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 3 NOTIFY
Contact: <sip:[email protected]>;isfocus
Event: conference
Subscription-State: terminated;reason=noresource
User-Agent: Viceroy 1.2
Content-Length: 0
24.061281 @SIP/Transport.c:121 type=4 (00000000/0)
[NOTIFY sip:[email protected]:56754 SIP/2.0
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK6ddeb2cf73f6ce49
Max-Forwards: 70
To: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 3 NOTIFY
Contact: <sip:[email protected]>;isfocus
Event: conference
Subscription-State: terminated;reason=noresource
User-Agent: Viceroy 1.2
Content-Length: 0
23.162985 @SIP/Transport.c:121 type=4 (00000000/0)
[NOTIFY sip:[email protected]:56754 SIP/2.0
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK6ddeb2cf73f6ce49
Max-Forwards: 70
To: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 3 NOTIFY
Contact: <sip:[email protected]>;isfocus
Event: conference
Subscription-State: terminated;reason=noresource
User-Agent: Viceroy 1.2
Content-Length: 0
22.576970 @SIP/Transport.c:121 type=4 (00000000/0)
[NOTIFY sip:[email protected]:56754 SIP/2.0
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK6ddeb2cf73f6ce49
Max-Forwards: 70
To: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 3 NOTIFY
Contact: <sip:[email protected]>;isfocus
Event: conference
Subscription-State: terminated;reason=noresource
User-Agent: Viceroy 1.2
Content-Length: 0
9.754589 @SIP/Transport.c:121 type=4 (00000000/0)
[NOTIFY sip:[email protected]:56754 SIP/2.0
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK199efcba4d7aa545
Max-Forwards: 70
To: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 2 NOTIFY
Contact: <sip:[email protected]>;isfocus
Event: conference
Subscription-State: active;expires=3600
User-Agent: Viceroy 1.2
Content-Type: application/conference-info+xml
Content-Length: 205
[<c-i v="0" st="f" en="sip:[email protected]">
c<h>i</h><m t="a"/><m t="v"/>
c<h>o</h><m t="a"/><m t="v"/>
</c-i>
9.753208 @SIP/Transport.c:121 type=4 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP m.0:56751;branch=z9hG4bK03684cb47799c88d
To: "u0" <sip:[email protected]>;tag=385103684
From: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 1 SUBSCRIBE
Contact: <sip:[email protected]>;isfocus
Expires: 3600
User-Agent: Viceroy 1.2
Content-Length: 0
9.664868 @SIP/Transport.c:121 type=4 (00000000/0)
[ACK sip:[email protected]:56754 SIP/2.0
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK158fdb603882a2ef
Max-Forwards: 70
To: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 1 ACK
User-Agent: Viceroy 1.2
Content-Length: 0
9.099356 @SIP/Transport.c:121 type=4 (00000000/0)
[INVITE sip:[email protected]:56754 SIP/2.0
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK0589ec793bcf2336
Max-Forwards: 70
To: "Laura Macburke2" <sip:[email protected]:56754>
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 1 INVITE
Contact: <sip:[email protected]>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 536
[v=0
o=admin 0 0 IN IP4 uen0.0
s=u0
c=IN IP4 uen0.0
b=AS:2147483647
t=0 0
a=hwi:34:1:1200
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12 3 0
a=rtcp:16387
a=rtpmap:3 GSM/8000/1
a=rtpmap:0 PCMU/8000/1
a=rtpID:1892442351
m=video 16384 RTP/AVP 126 34
a=rtcp:16385
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 0 rules 15:352:288
a=framerate:20
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=fmtp:126 imagesize 0 rules 20:160:120:160:120
a=rtpID:123999715
Video Conference Support Report:
34.059656 @SIP/Transport.c:1218 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK6ddeb2cf73f6ce49
To: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 3 NOTIFY
User-Agent: Viceroy 1.2
Content-Length: 0
33.137083 @:0 type=2 (00000000/2)
[VCCALL_ENDEDCOUNT]
[17]
30.069301 @SIP/Transport.c:1218 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK6ddeb2cf73f6ce49
To: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 3 NOTIFY
User-Agent: Viceroy 1.2
Content-Length: 0
26.059889 @SIP/Transport.c:1218 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK6ddeb2cf73f6ce49
To: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 3 NOTIFY
User-Agent: Viceroy 1.2
Content-Length: 0
24.061489 @SIP/Transport.c:1218 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK6ddeb2cf73f6ce49
To: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 3 NOTIFY
User-Agent: Viceroy 1.2
Content-Length: 0
23.164466 @SIP/Transport.c:1218 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK6ddeb2cf73f6ce49
To: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 3 NOTIFY
User-Agent: Viceroy 1.2
Content-Length: 0
22.578864 @SIP/Transport.c:1218 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK6ddeb2cf73f6ce49
To: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 3 NOTIFY
User-Agent: Viceroy 1.2
Content-Length: 0
11.029675 @:0 type=2 (00000000/2)
[VCVIDEO_STARTCOMPLETED]
[16]
11.029646 @:0 type=2 (00000000/2)
[VCVIDEO_INCOMINGCOMPLETION]
[11]
10.719451 @:0 type=2 (00000000/2)
[VCUSE_INTERNALMIC]
[29]
10.650426 @:0 type=2 (00000000/2)
[VCUSEDV]
[27]
9.763906 @SIP/Transport.c:1218 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK199efcba4d7aa545
To: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 2 NOTIFY
User-Agent: Viceroy 1.2
Content-Length: 0
9.688386 @SIP/Transport.c:1218 type=1 (00000000/0)
[SUBSCRIBE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP m.0:56751;branch=z9hG4bK03684cb47799c88d
Max-Forwards: 70
To: "u0" <sip:[email protected]>;tag=385103684
From: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 1 SUBSCRIBE
Contact: <sip:[email protected]:56751>
Event: conference
Expires: 3600
User-Agent: Viceroy 1.2
Content-Length: 0
9.613321 @SIP/Transport.c:1218 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK0589ec793bcf2336
To: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 1 INVITE
Contact: <sip:[email protected]:56751>
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 413
v=0
o=lauraburke 0 0 IN IP4 m.0
s=u0
c=IN IP4 m.0
b=AS:2147483647
t=0 0
a=hwi:784:1:1800
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 56759 RTP/AVP 12
a=rtcp:56760
a=rtpID:-337239833
m=video 56757 RTP/AVP 126
a=rtcp:56758
a=rtpmap:126 X-H264/90000
a=RTCP:AUDIO 56760 VIDEO 56758
a=fmtp:126 imagesize 0 rules 15:160:120:160:120
a=framerate:15
a=rtpID:-362537079
9.195704 @:0 type=2 (00000000/0)
[VCVIDEO_INCOMINGATTEMPT]
[3]
9.119168 @SIP/Transport.c:1218 type=1 (00000000/0)
[SIP/2.0 180 Ringing
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK0589ec793bcf2336
To: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 1 INVITE
Contact: <sip:[email protected]:56751>
User-Agent: Viceroy 1.2
Content-Length: 0
9.118898 @SIP/Transport.c:1218 type=1 (00000000/0)
[SIP/2.0 100 Trying
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK0589ec793bcf2336
To: "Laura Macburke2" <sip:[email protected]:56754>
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 1 INVITE
User-Agent: Viceroy 1.2
Content-Length: 0
0.266057 @:0 type=2 (00000000/2)
[VCUSEDV]
[27]
0.000000 @:0 type=2 (00000000/2)
[VCUSEDV]
[27]

Videos freeze after 5-7 seconds, no audio at all - Google Chrome

Win7 x64
Google Chrome 21.0.1180.60 m
Flash version 11.3.31.222
My os is 64-bit, but the "what version of flash are you running" window says it's 32-bit. Which strikes me as odd. Anyway,
Problem is basically laid out in the subject. No matter what video I try to play, it freezes after a few seconds. There is no audio whatsoever. I tried the uninstall (using the uninstaller) I found in another Flash forum, but it didn't help. As a matter of fact, running the uninstaller made no difference at all. Videos still played for a few seconds, sans audio, then froze.
Is there a fix for this? It only started happening yesterday.
Update: Also happens in Firefox. IE works fine.

Our Chrome browser not only automatically updates it's version (21.0.1180.60m) without notice , but the Shockwave Flash (11.3.31.222/ 11.3.300.268) plugins too!!!
I had to disable 11.3.31.222 along w. 11.3.300.268 and have 11.2 r202 (11.2.202.235) solely enabled again because this time, i had 'shockwave plugin unresponsive' at some websites that stalled pages, and of 11.3.300.268., 'unresponsive shockwave plugin' refused to play YT.
*type: chrome://plugins in address bar in chrome - click the + on the top right
And enable/disable plugins
I think d/l's here might very well work: http://www.oldapps.com/flash_player.php
or, directly
(Although it seems some are not happy w. crashing browsers and such with 11.3.300.268 version!?)
Adobe Flash Player 11.3.300.268 (Non-IE)
http://www.oldapps.com/flash_player.php?old_flash_player=8021

Captivate 5.5 - Event Video Freezes after completion

Hello All,
I am in the process of creating the e-Learning course.
I want to have a video in a slide.Below are my requirements:
1) Video should be an event video.
2) I need to control the event video with project player controls i.e there should not be two player controls
3) After the completion of video, the course should move to the next slide
Note: I cant insert slide video matching to the slide duration. The objective is to use event video as slide video matching to single slide duration.
Trial 1: I selected the timing as "specific time" and enter the value equivalent to the video duration. Also checked the "Synchronize with Project"
Issue here is that, whenever there is buffering, the time lapses and the slide progressing to next slide even before the video completes
Trial 2: I selected the timing as "duration of the video" and checked the "Synchronize with Project"
Issue here is that, project freezes after completion of video and doesn't progress to next slide. Even the manual controlling of 'Fast forward' or 'Play' don't work.
Tried to change the slide timings i.e same as video duration, less than video duration and more than video duration. There is no use.
I understand it's complicated. Any idea or suggestions to rectify this issue?
Thanks & Regards,
Bruno Arunjunai

Hi Rodward,
I have already posted the issue of using the slide video. Waiting for the solution.
Captivate 5.5 - Slide video restarts automatically while buffering
Alternatively, i tried to use the event video as a solution.
When I tested the event video, it never restarts the video while buffering. However, i end up in a different issue
Hope this clarifies.
Thanks & Regards,
Bruno Arunjunai

Video freezes after 30 seconds...

I have a problem with my iPod Video 60 GB. When I play a video, it freezes after 30 seconds then stays frozen for a few seconds and then continues without sound.
Does somebody know how I can solve this problem?
Thanks.
~J~

Update your iPod with the latest iPod Updater. This is a widely known glitch, and has been fixed with that updater.

IChat video freezes after a few seconds of "chatting"

I am able to start a video discussion using iChat with someone on AOL, but the video image freezes after about 10 to 15 seconds. Is there a setting that needs to be changed? Is this a common problem?

Ok If they have the AOL package it includes the AIM IM application.
1) it has to be activated for use and it sounds like you are pats this.
2) depending how old the package is will determine which AIM application it is based on.
Most likely it is AIM 5.9 if it is a bit older.
IF it is it should have several things done.
a) the IM part of AOL needs to be allowed as an Exception in the XP Firewall See here and allow for the AOL package if required)
b) The most likely. It will need to have the Video Quality reduced.
In AIM 5.9 the outgoing Video appears as a tab behind the incoming one.
This tab should be brought to the front.
Next to the Video now should be a small icon.
Click on it and a slider should appear.
Slide the slider to the left to reduce the quality.
This will in fact allow their processor to produce more frames per sec and the pic should not freeze.
c) they should look at message 570 and see if this applies to them
8:35 PM Tuesday; June 19, 2007

YouTube video freezes after resolution is increased or video is expanded. what is the slolution pleas?

Similar Messages

Maybe you are looking for