YouTube videos playing on the new YouTube app suddenly stops?

I am currently on an iPhone 4S running iOS 6, and this happened since yesterday night. I've tried to reboot the iPhone, turn off back ground running applications, and nothing seems to help. As I am watching a YouTube video on the newest version of the YouTube app, it just suddenly stopped. This might be a buffering problem, I'd suspect, but I've tried to disconnect and reconnect my router and modern; which does not seems to help. Please respond.

Hello DukeEMPH
The article below will give some general steps for troubleshooting apps that were downloaded from the App Store.
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/TS1702
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Similar Messages

Video playlists in the new music app on the iPad 2 are empty

Video playlists in the new music app are empty, they use to play on the iPod app before the os5 upgrade. The videos playlistists show up in iTunes under the iPad app when connected to my pc, but not when disconnected. Is there a way to fix this? Very frustrating.

You'll probably find your Video Podcast in the Videos App.

TS2313 Recently downloaded the new podcast app, but does not play offline. Can anyone help.

Recently downloaded the new podcast app, but does not play offline. Can anyone help? Thank you.

Hey Karenfromanamosa,
I fixed this problem by turning off the ipad and then turning it back on after 5-10 minutes.
Hopefully then when you play a video it will start playing.

Will the new photos app and icloud photos library support all formats of pics and videos from my iphoto library?

I will be migrating my whole 200gb iPhoto library 9.5.1 mavericks over to Yosemite iPhoto 9.6.1 and then migrate to the new photos app and hopefully to the icloud.photos online. Does this all support all of my formats such as AVI videos in my iPhoto library. I don't want to lose those through migration.

I have this 31% issue too - when I attempt to update my iPhoto library to the new Photo app.
I have a few libraries - one on my mac, and two on a NAS. I access the NAS via wifi.
The mac based library did update, but the two network albums have yet to be successfully migrated over to Photo.
It's driving me insane!!!

How to play podcasts on your tv with the new Podcast app

Since with iOS 6, the podcasts were removed from the music app, I can't play video podcasts on my tv using the tv out cable anymore. Same is try for iTunes U clips, they don't appear in the Movies app anymore. I used to download them using Podcast or iTunes U and then watch them using tv out through Music or Videos. Anyone else has this problem?

Hi rob559,
I happened to have a digital AV adaptor and was able to reprduce the problem you mentioned regarding the video output from the Apple Podcast App.
On the Downcast App, I tested it with the digital AV adaptor and was able to have the video is in full screen on a 16:9 HDTV. Thus, I think it is worth the investment to purchase the Downcast app to have full screen video playback.
Cheers!

Does the new Directv App allow video through Airplay?

Anyone know if the new Directv app for iPad 2 allows video through airplay? I'm only getting audio when watching live TV and movies through the app. I found a few articles that indicated the app would allow videa through airplay, but it doesn't seem to be working. I wasn't sure if there was a setting I needed to change or something else I should be doing.

How did you import the photos?
Are the missing photos perhaps referenced? Then they cannot upload to iCloud.
You can check with a smart album, if you have any photos in the library, that cannot upload to iCloud.

Why won't videos play on my new iPad 2 14gb? They either constantly buffer, stop and I have to press play again, play sound only etc.

Why won't videos play on my new iPad 2 14gb? They either constantly buffer, stop and I have to press play again, play sound only etc.

Thanks .Ralph. The problem is only on the iPad 2only. I have an iPad 1 as well and it never had the problem. The only videos that I have tried are you tube and the tutorials on apple.com. I have absolutely no problem on either of my laptops or desktop PC's. Only the iPad 2. I am a new Apple user, so not very familiar yet with the product, but this is an absolute deal breaker for me. With Apple's reputation I was not expecting any such problems and it is beyond my skill set to solve it. Very frustrating. Again, no problem with you tube videos. I don't watch movies, so am not a Netflix member and haven't tried that yet, only you tube videos and apple.com tutorial videos. I have to watch those on my laptop. Again, I found a fix to the you tube problem. It was a link to a site. www.youtube/html5. html5 video player trial that you click on and once done, the videos on the you tube app started working great. They were doing the same thing as the tutorial videos prior to that. No such luck with the other web videos, at least the ones that i have tried. Hope this is enough info and understandable. You might check out the html5 site. I didn't thoroughly understand why, but it worked. You may understand it better. I am a proficient user, but far from an I.t. Pro. I have read Many posts with similar problems, but no simple solutions and the ones I did try didn't work. Speed tested well. Channel is set to auto and always different than neighboring networks, usually channel 11. Tried disabling QOS as suggested....no good. I am completely stumped. Any help is greatly appreciated. Thanks very much for you time and helpful info.
David

2 videos playing in the same page

Hi All
I've got a new issue, I have a page with 2 animated graphs (as MP4). It seems that there is a conflict to auto play the both video, because one appear with a skin controler (not asked to) + the video stop before finishing to play.
I've test by deleting the second video... Then it works....
How do you manage to have 2 videos in the same page ?? do you have the same problem?
I want to avoid Jpg Sequences as they are much more heavy

Apple does not allow playing multiple videos at the same time. they are
affraid your ipad will crash vecause of it's limited memory
never tried multiple videos after each other.
(mobil gesendet)
Am 27.10.2011 10:23 schrieb "minia92" <[email protected]>:
Re: 2 videos playing in the same page created by minia92<http://forums.adobe.com/people/minia92>in
Digital Publishing Suite - View the full discussion<http://forums.adobe.com/message/3992755#3992755>

How do i video chat on the new imessage

everytime i sent a video chat request it just says waiting for _____ to answer, and

Hi,
In the new Messages App you can have an iMessages account and older "iChat" type accounts
iMessages accounst are created with registering an Apple ID which can also be used on iPhone and iPads or iPod touches and iMessages are then synced across all devices.
It is an Apple Only service and is text only
In the Main Message Window/interface once you have starts an iMessage chat you can use the Video icon which will start up FaceTime to Video Chat
"iChat" Type accounts
Messages in built on top of what was iChat and you can still use the Names and IDs that you used in iChat.
You can see lowere left in the pic I have 10 such accounts logged in (The pic also indicates I keep the Buddy Lists separate - if you use the combined list the view is different).
You can then work two ways
Starting a chat like the iMessages way but to an AIM Buddy (or Jabber) and than also use the Video icon and this will start an A/V chat in Messages.
Example pic of a chat between two of those Logins
Here the Video icon will start an "iChat" Style chat (if it were an outside Buddy - obviously I can't video to myself on the same computer)
The alternative is to have the Buddy lists On show and work from a Buddy list and it's icons
This is the same Account as the above pic but in the Buddy list.
You can start from the Green icons or highlight a Buddy and use the bottom icons (or the Buddies Menu) or right click a Buddy.
To Unlink Combined Buddy list go to Messages Menu > Preferences > General Section and untick the line about Gathering all Accounts into one list (It's actually all Non iMessages accounts as the iMessages account does not have a Buddy list)
9:15 PM Sunday; January 27, 2013
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

The New Photo App Not Syncing Properly

I've been pulling my hair out over the last week or so with the new Photo's in the iCloud and how the online database won't sync properly.
This is how I went about the upgrade.
I have a Mac Mini which has been for the past several years drawing down my family's photo's and video etc from all out devices using iPhoto. This has worked very nicely. I've been adding pictures from my stream into albums etc with about 200 or so. All files are stored locally of course in organized folder which is then back up on to a external drive.
After the latest update I opened the new Photo app and it started to convert my library over and started to upload all the photos, some 15000 pictures and a few hundred videos. I started to check my iPad and iPhone which is where I started to see problems, missing albums, missing photos, duplicates etc. Before anyone asks I emptied my trash in iPhoto before I updated as I had read about the new app pulling all the photos from trash in too.
After several days of stopping and starting my iPhone and iPad looked like it should with my albums and the correct amount of files. I checked the online iCloud Photos through my browser which also match, but I had all the old iPhoto months and daily libraries still showing despite me organizing my libraries not to group the photos in these old style albums.
At this point I also looked back on my Mac Mini to find that all the libraries had totally disappeared and there seemed to be a couple of thousand files missing, ie my ipad, iphone and online coun which is at something like 15,634 files and the Mac Mini Photo app was showing about 13,450. Plus, it was now saying uploading some 24,000 files but was in fact doing nothing.
At this point I decided to turn my main iMac on and see if I could get the databases to pull down from the iCloud to see if it matched. Three days later it's stuck at some 3200 files and saying it's still adding 15,000 files. I then went back on to my Mac Mini and started a fresh version of Photo and it's now stuck in the same state as the iMac saying it's adding file but nothing is changing.
Please help.

How did you import the photos?
Are the missing photos perhaps referenced? Then they cannot upload to iCloud.
You can check with a smart album, if you have any photos in the library, that cannot upload to iCloud.

Apple aware of video problem in the new Intel iMacs

Macworld Daily News
Thursday - February 09, 2006
Apple investigates Intel iMac Front Row problems
By Macworld staff
Apple has confirmed it is aware of, and investigating, reports of video problems in the new Intel iMacs.
Recent reports claimed that some users had experienced random horizontal lines and other video playback problems when playing video in Front Row.
"Apple is aware of this issue and is looking into it," the company said in an email to a web-based pressure group that has been gathering information on the problem. "If a customer has any technical issues, they should contact AppleCare."
The problem is allegedly software-based.

"Sure, I'd be more understanding had it been an issue that required a very special set of conditions to trigger"
Apparently it does as this issue is not affecting all users.
"As I was told, affected owners would not be proactively notified"
Where you you prefer them to use their limited resources, trying to figure out who MAY be affected and sending them some sort of detailed action plan, or spending the resources determining the cause of the issue and developing a solution that can be distributed to the ones who need it not only now, but those that may discover the issue next week?
I can understand that you are frustrated, and don't blame you for feeling that way, but this is an all new piece of technology and bugs are going to come up that were missed in testing. No company can afford to test at a 100% level. To do so would drive the costs so high as to make it impossible to sell the product, especially to the market the iMac is aimed at. Apple has a pretty darned good track record of resolving issues quickly when they appear. Until they do you only have a few choices. Use the workaround until the solution appears, waste time complaining about it, or sell the iMac and purchase a different product. That's really about all you can do!
It was good of you to spend your valuable time, and yes it is valuable, trying to help the engineers or service reps solve the issue. That they spent that much time with you should show their commitment to solving this issue.
Be patient, give them a chance, they have not had long to try and figure this out.

With the new 'PODCAST' app how do I put podcasts in playlist

With the new 'PODCAST' app how do I put podcasts in playlist so they play consecutively?

I found that if I play the podcasts starting with the last one when it ends it will play the previous one automatically.

Many of my older ITunes downloads play perfectly well on my IMac but constantly skip to the next song or suddenly stop playing on my IPhone. The problem is the same with both my old 4s and my new 5s. I have tried deleting and re-downloading to the phones.

Many of my older ITunes downloads play perfectly well on my IMac but constantly skip to the next song or suddenly stop playing on my IPhone. The problem is the same with both my old 4s and my new 5s phones. I have tried deleting and re-downloading my music library to the phones, but the result is always the same.

I'm adding more information:
in Finder, my iMovie folders are all visible and accessible. When I click on a clip from iMovie Events folder, Quicktime opens and plays the clip. ALL my video is not missing - it just isn't showing up in the Event Library!
This happened all of a sudden, while I was working on iMovie project (on both computers).
All my Projects are intact, and play when I open them.

[svn:fx-trunk] 12025: Switching out the old video component for the new video component that uses OSMF .

Revision: 12025
Revision: 12025
Author:   [email protected]
Date:     2009-11-19 17:48:04 -0800 (Thu, 19 Nov 2009)
Log Message:
Switching out the old video component for the new video component that uses OSMF. Also fixing RSL issue with OSMF because a change in flex-config.xml accidentally got overwritten. Also fixing a bug caught during the last code review where you would set the volume on the VideoPlayer, but the volumeBar wouldn't be made aware of that change.
Switching out the video component results in many API changes. The changes are highlighted below:
Class name changes:
- spark.primitives.VideoElement is being renamed to spark.components.VideoDisplay
- spark.components.mediaClasses.StreamingVideoSource is renamed to park.components.mediaClasses.DynamicStreamingVideoSource
- spark.components.mediaClasses.StreamItem is renamed to park.components.mediaClasses.DynamicStreamingVideoItem
VideoDisplay/VideoPlayer event changes:
The new video component's events are:
- bytesLoadedChange : org.osmf.events.LoadEvent
- currentTimeChange : org.osmf.events.TimeEvent
- durationChange : org.osmf.events.TimeEvent
- mediaPlayerStateChange : org.osmf.events.MediaPlayerStateChangeEvent
The old video component's events were:
- close : spark.events.VideoEvent (removed)
- complete : spark.events.VideoEvent (replaced with mediaPlayerStateChange)
- metaDataReceived : spark.events.VideoEvent (replaced with mediaPlayerStateChange)
- playheadUpdate : spark.events.VideoEvent (replaced with currentTimeChange)
- progress : flash.events.ProgressEvent (replaced with bytesLoadedChange)
- ready : spark.events.VideoEvent (replaced with mediaPlayerStateChange)
VideoDisplay/VideoPlayer property changes:
Renames:
- maintainAspectRatio:Boolean has been renamed to scaleMode:String and rather than true/false, it now access 4 values: none, zoom, letterbox, and stretch. See the enum class org.osmf.display.ScaleMode.
- playheadTime:Number has been renamed to currentTime:Number
- playWhenHidden has been renamed to pauseWhenHidden, and it's "tense" has been reversed. So playWhenHidden = true correlates to pauseWhenHidden = false. Also, before we would only pause when the video component was explcitly set to visible=false, but now we detect if the video components or any of it's ancestors have been hidden.
- totalTime:Number has been renamed to duration:Number
New properties:
- bytesLoaded:Number This is a new property not available on the old video component
- bytesTotal:Number This is a new property not available on the old video component
- loop: Boolean this was a property added a while ago on the old video component but not in the original video player spec
- mediaPlayerState: this is a new property that details the state of the video component. See org.osmf.media.MediaPlayerState for all the possible values.
- seekToFirstFrame:Boolean (pending PARB approval) - This is a new property available on VideoDisplay/VideoPlayer. When autoPlay = false, if seekToFirstFrame is set to true, then we will connect to the server to start downloading the video, figure out the size of the video and resize appropriately, and show the first frame of the video. If seekToFirstFrame is false, then no connection to the server is made, there's no implicit size for this video, and the first frame will not be show automatically. By default the value of this property is true. In the old video component, when autoPlay = false, we always has the same behavior as seekToFirstFrame = true. Now it is controllable through this property. Eventually, (not for Flex 4.0), we will most-likely have support for a thumbnail source or a splash screen so the video's preview will show up without making an unneeded connection to the server. The property name may change depending on PARB.
Other changes:
- autoRewind: The default of autoRewind is now true instead of false
- enabled: before we paused the video when the video component was explicitly set to enabled = false. Now we pause the video when the video component or any of it's ancestors have been disabled.
VideoPlayer-only changes:
- videoObject:flash.media.Video property is now a new property on VideoPlayer. It was previously only on VideoDisplay.
- The skin states for the old VideoPlayer were: connectionError, disabled, disconnected, loading, playing, stopped, connectionErrorAndFullScreen, disabledAndFullScreen, disconnectedAndFullScreen, loadingAndFullScreen, playingAndFullScreen, stoppedAndFullScreen. The new skin states are: uninitialized, loading, ready, playing, paused, buffering, playbackError, disabled, uninitializedAndFullScreen, loadingAndFullScreen, readyAndFullScreen, playingAndFullScreen, pausedAndFullScreen, bufferingAndFullScreen, playbackErrorAndFullScreen, disabledAndFullScreen
DynamicStreamingVideoItem property changes:
- bitRate:Number renamed to bitrate:Number
DynamicStreamingVideoSource property changes:
- initialIndex has been added to DynamicSteramingVideoSource
- live:Boolean has changed to streamType:String which accepts values: live, recorded, any. See the enum class org.osmf.net.StreamType for more info.
- serverURI:String renamed to host:Object
- streamItems:Array has changed types to streamItems:Vector.
ScrubBar property changes (THESE CHANGES ARE NOT DONE YET, BUT SHOULD BE DONE SOON)
- bufferedStart will be removed
- bufferedEnd will be renamed to loadedRangeEnd. This property name still may change depending on PARB.
- bufferedArea skin part needs to be renamed. Probably will be renamed to loadedArea. PARB still deciding.
QE notes: -
Doc notes: -
Bugs: -
Reviewer: Kevin
Tests run: checkintests
Is noteworthy for integration: Yes
Modified Paths:
    flex/sdk/trunk/frameworks/flex-config.xml
    flex/sdk/trunk/frameworks/projects/spark/defaults.css
    flex/sdk/trunk/frameworks/projects/spark/src/SparkClasses.as
    flex/sdk/trunk/frameworks/projects/wireframe/build.xml
    flex/sdk/trunk/frameworks/projects/wireframe/src/spark/skins/wireframe/VideoPlayerSkin.mx ml
    flex/sdk/trunk/frameworks/spark-manifest.xml
Added Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/VideoPlayer.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/VideoPlayerSkin.mxml
Removed Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/VideoPlayer.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/VideoPlayer2.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/mediaClasses/StreamItem.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/mediaClasses/StreamingVideo Source.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/VideoElement.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/VideoElement.png
    flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/VideoPlayerSkin.mxml
    flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/VideoPlayerSkin2.mxml

I've got that same problem: iPod Touch 2nd Gen, Apple Component Cables, and an HD TV.
The funny thing is, the cable works fine with an iPod Classic (160 GB) but not for the iPod Touch. Can anyone explain why that is?

Can I import and open raw files on the new photo app?

Hi,
Can I import and open raw files on the new photos app on my ipad? Does it convert it to jpeg automatically when you want to share them?
Thanks.

Clem is telling you to click on the View menu, move the pointer down to the item "Metadata," & from its choices make sure "Show Titles" is selected. Do this, then make sure you are in a view in the main window that shows one or more videos (or whatever) that you want to title. Click once on one of them, & if the separate Info window is not open, open that (on the Windows menu or command + i as a keyboard shortcut). In the Info window the top line will be "Add a Title."
Click once on that & type your title.
This works for any item, video or photo.

YouTube videos playing on the new YouTube app suddenly stops?

Similar Messages

Maybe you are looking for