Youtube Widget not working when publishing to folder.

I am having trouble adding youtube videos into my site. I am publishing to a folder than uploading, and all goes fine except the youtube widget doesn't activate when uploaded. Any thoughts on why this is happening? I did a quick work around using html widget, but would rather it been clean and the iWeb way...
example: www.gpstravelmaps.com/About.html
Thanks, Aaron.

Hi,
I too have the same problem. I looked at your link and it seems that you have the problem solved as I could see the clip. How'd you do it?
All the best,
Tony

Similar Messages

  • IWeb moves pictures by itself, links do not work when publishing to folder

    When I first started using iWeb i would save the page I was working on and then publish it to a folder so I could look at it in Safari and it used to work fine. Now when I do this the pictures come up and they are pushed up halfway off of the top of the page and you aren't able to scroll down all the way to see the bottom of the background picture that I have. Also, the links to the other pages of the site do not work after publishing it to a folder. If anyone has any advice I would greatly appreciate it!
    17" Powerbook G4   Mac OS X (10.4.6)  

    I uploaded it to a free host for now. here is the link: http://www.zendurl.com/garrett/cgi-bin/www.garrettramquist.com/Welcome.html

  • Youtube does not work when i am using wifi on iphone 4

    the youtube does not work when i use wifi. it works perfectly when i use 3 g network ..

    At home when i use my Wi-Fi it work normal, but as soon as i go out, for example on the bus or at work it keeps saying "Cannot connect to Youtube".

  • Picture hyperlinks not working when published? Please help....

    Some of the hyperlinks to my pictures do not work when I publish to my folder. I´ve tried to empty Safaris cache but it still doesn´t work. Please help me, pretty urgent....

    hi briebrie,
    this is common mistake, see my post in this thread:
    http://discussions.apple.com/message.jspa?messageID=4004970#4004970
    The work around is to leave iWeb default nav bar and header enabled, add your home made nav bar (outside/below of iWeb default nav bar).
    Then turn off iWeb nav bar and header when you are done.

  • Links not working when published

    I know, I know, this topic has been discussed before but I am very very new at this and most answers I just don't understand (I am used to visiting not building sites). Anyway, I am having a **** of a time getting some links in my webpages to work (better said, most work, some not). I don't understand, I've checked all links, no problems (not even when published locally). But when I FTP it to my host something seems to get lost in the transfer. I've deleted the pages where this problem occurs and made new ones. Doesn't help. Does any one have any idea and know how to explain the answer to me in the simplest terms? I would be so very grateful!
    thanx

    The correct ftp settings would be your username and password and what you use to connect to your server. If you have already uploaded your site, then these settings would be correct. If using Cyberduck with incorrect settings, you would not be able to connect to your hosting space full stop.
    Anyway, you said that you were just uploading the contents? If this is the case, perhaps if some of your links do not work, then you have not uploaded all the files that you need to. If uploading the contents of your site folder, then when Cyberduck asks you to upload, or you click it under action at the top, it will ask you to select the files - normally you would go to User and then Sites and then click on your site folder. When this shows up, click on the first file that is shown and do a select all and this will then upload all the contents. Check to ensure that all the html pages are there, plus their relevant folders - these folders contain all the CSS - so for each html page their is a folder of the same name e.g. About Us.html and About Us folder. There are also feed files that need to be uploaded too.
    What you can try to see if it works is to upload your whole site folder and separate index file and see if the links work when you do this. Your url will be different if you do this, but just try it and see.
    The other problems when links do not work is that you could have either an image or another text box too near to the navigation menu or link that covers it up so that it will not work. Go into iWeb and check this by doing a command A to see placement and you can then move images and text boxes around if this is the case.

  • Close window not working when publishing as HTML5 on Adobe Connect using CP8

    Hi all,
    I'm trying to get a button that closes the project/window at the end of a video. I am using CP8.
    I can get it to work when publishing as SWF to Adobe Captivate.
    It also works when publishing as HTML5 but not on an LMS (Adobe Connect).
    I have tried various methods including
    - On success execute a Javascript =  window.close()
    - On success - exit
    - On success execute advanced action = Assign cpCmdExit with 1
    I also tried adjusting the slide settings On Exit: exit and the publishing settings Project End Options: Action: Close project.
    Nothing works.
    Any ideas?
    Many thanks,
    Aimee

    Hi Aimee,
    Can you test this to close the course window:
    Insert 2 buttons or smart shape used as buttons (as Finish course buttons).
    On the first button apply an action to execute javascript and in the script window, use this script: parent.close()
    On the second button apply an action to execute javascript and in the script window, use this script: top.window.close()
    Upload the published project on your LMS and check if any of these works for you.
    Thanks
    Himanshu

  • Rollover Slidelets not working when published

    Hi,
    I'm using CP5.5 for a course that uses numerous rollover slidelets.  Everything works as expected when previewing the slides in Captivate however the rollover slidelets do not work when the course is published and viewed in a browser.
    Any idea what could be causing this?
    Thanks,
    Matt

    Your project file may be experiencing some corruption.  Did you insert each of these slidelets using the Insert menu or did you perchance just copy and paste them from the same one?  I've seen that practice cause issues sometimes.
    Try creating a new blank project and then insert a few test slidelets using the Edit menu.  Do they work when this project is published?  If so, at least you know your Cp install is fine.
    Try hiding slides in your project as per suggestions in this post:
    http://www.infosemantics.com.au/adobe-captivate-troubleshooting/basic-troubleshooting-tech niques
    It may be that the corruption is limited to one or more slides and you can resolve it by rebuilding those slides.

  • The navigation menu does not appear when published to folder and my 12 photos are not on the site either

    The navigation menu does not appear when published to a file.  My 12 photos are also absent as well, just as if they wernt added.
    I have tried rebuilding the site but the same problem appears.  Everything else seems perfect up to tha publidhed file.
    Has anyone had the same problem,
    John
    Message was edited by: BOURBAH

    Have you tried: Trouble installing iTunes or QuickTime for Windows or iTunes for Windows Vista or Windows 7: Troubleshooting ...

  • The navigation menu does not appear when published to folder and my 12 photos arenot on the site eitherr

    The navigation menu does not appear when published to a file.  My 12 photos are also absent as well, just as if they wernt added.
    I have tried rebuilding the site but the same problem appears.  Everything else seems perfect up to tha publidhed file.
    Has anyone had the same problem,
    John

    Have you tried: Trouble installing iTunes or QuickTime for Windows or iTunes for Windows Vista or Windows 7: Troubleshooting ...

  • YouTube widget not working in F12 preview

    Hi all,
    I am having some issues with the YouTube widget. Where previously it has worked in the F12 preview, it now does not. It works after publishing, but this is frustrating because I need to do a lot of fine tuning.
    Any suggestions?
    Thanks
    Mike

    The best way to test You Tube (and Web Object) interactions are from a web server. I use XAMPP, it is very easy to set up. During testng, I just publish to that webserver's folder directly and check it on the browser.
    Sreekanth

  • Spry horizontal menu bar and accordion panels not working when published

    Hi,
    I'm a newbie to Dreamweaver and have been asked to design an intranet site. On the site, I added both Spry widgets for a horizontal menu bar and an accordion panel. Both of these widgets work in preview, however, neither work when I publish. I uploaded the Spry asset folder (with all the CSS and JS files) to the remote server, but still no luck. What am I missing?
    Thanks.

    Despite of what you have staed, my bet is on the fact that the SpryAssets folder and/or the included files are not being found by your page..
    Open the site in FF, click on view Source and in the source code click the link to the JS file. If it can be found, it will show the content of the file and you will have the satisfaction of knowing that the page can find the file.
    If it does not show the content, you need to correct that.
    Good luck.
    Ben

  • Preloader not working when published

    Hi...I have situation with my preloader. I am loading audio
    from an external folder. When I click on the audio a preloader
    loads the audio and upon completion plays audio.
    My problem lies in that when I test the movie everything
    works as expected. Once I view the actual .swf or the .exe after I
    publish, the preloader doesn't work. The audio still loads but the
    preloader does nothing. It might be important to not after I
    ctrl+return to test, I ctrl+return again to test as if it were
    online. It works when I do the simulate download and not right away
    then.
    Does anyone know what I might be doing wrong? Is there a
    setting in the publish settings I need to change?
    This is the first time I've had this happen. Usually I have a
    pre-loader at the begining of a flash file and load the file. This
    one is in a movie clip and only activated upon a mouse action.
    Any help or suggestions is greatly appreciated.
    Luke

    Thank you for your information. It worked great as far as...I
    could build a preloader and have the movie show up on the screen as
    I wanted. Now for problem number two that has developed...
    The MovieClipLoader that calls external .swf file. This is a
    movie that has an image scroll bar that calls a movie clip that
    scrolls a panoramic photo. Within that movie clip of the panoramic
    I have buttons that then call other movie clips from the library
    using
    on(release){
    _root.attachMovie("myModelScroll", "screen",1);
    _root.screen._x =10;
    _root.screen._y =425;
    This is an example of what I am doing
    I have a panoramic shot that is in an image scroller, that
    panoramic is of a group of buildings each building has a button
    next to it. Those buttons then call up another movie clip from the
    library using the attachMovie clip to show another mini movie clip
    of what the building looks like inside, and what the purpose is.
    Issue:
    The buttons within the movie clip that is loaded into the
    image scroller fail to work. If I just load the .swf files into the
    browser it works just fine...
    but the issue is I have a huge file with an image scroller so
    I need a progress bar and a MovieClipLoader function.
    How do I now get the other code attached to the buttons
    within the movie clip that says attachMovieClip to work within the
    context.
    I am so baffelled as to why it won't work...
    Here is the code to my preloader and movieClipLoader
    My actionScript skills are very limited so any help is
    greatly appreciated but needs to be supplied in simple language.
    Thank you very much

  • Captivate 7 exit button does not work when published to LMS

    I recently published a course using Captivate 7 and uploaded it to our LMS.  During the review of the course it was noticed that the Close or Exit button on the controller did not work in IE.  However, it did work in Chrome.
    I have looked through this forum and found that there were similar issue with older versions of Captivate.  However, we have course published with Captivate 6 on our LMS in which the Close or Exit button does work.
    Does anybody have a solution for this problem?  Do we know if there is an update scheduled to fix this problem?
    Please let me know
    Dawn

    1.  Create a button in Captivate and assign a javascript call to "MyExit()"
    2.  Create a .js file called CourseExit.js.
    3.  Place the following code into that file.
    function MyExit()
      var SD = window.parent;
    if (blnReachedEnd == false && confirm("Would you like to save your progress to resume later?")){
    SCORM2004_CallSetValue("cmi.exit", "suspend");
    SCORM2004_CallSetValue("adl.nav.request", "suspendAll");
      else{
    SCORM2004_CallSetValue("cmi.exit", "");
    SCORM2004_CallSetValue("adl.nav.request", "exitAll");
    Unload(true);
    4.  Place the CourseExit.js into the "assets/js/" in the published folder
    5.  Add "<script language="JavaScript1.2" src="assets/js/CourseExit.js"></script>" to the html file that was output on the publish.
    I was able to set this up on the set up files on the local hard disk but so all I had to do was create a button and add the "MyExit()" code to the button, but when the next update came out it reset the hard disk files.  So, I have just resorted to updating the output file as seen above.
    Hope this helps.
    Garrett

  • Accordion widget not working in publish

    My presentation consists of one slide with an accordion widget on it. It previously worked when I published it. I made a text amendment and how it doesn't. I've taken scaleable html off - any other suggestions?
    The screen shows a grey 'loading' box and then reveals the correct page minus the widget.
    thank you.

    I don't see immediately an answer, but maybe someone else pops in, and he/she will certainly ask you which version of CP you are using, if the Interaction is updated etc...
    Can you also check if it is visible in output? Normally the stack order is not important, because an interaction gets automatically on top. However, if you are on CP6, all interactions paused the slide at the first frame. If you should have set the Interaction to fade in, maybe this could be the problem.

  • Rollover states not working when published online. Suggestions?

    I have created rollover states for image navigation. Works great in preview. Works great when published to desktop. I have uploaded to FTP site. Some of the rollovers work, others do not.? I have replaced and re-uploaded, still not working. The normal and active states all work, but the rollover state vanishes. The images are in the image folder. The css pages do have the code to swap the images. Same issue in Chrome, Safari, Firefox, and on ipad.
    What am I missing? Thank you for your help!

    What's the URL?

Maybe you are looking for