YouView box does not re-connect to network after l...

My youview box does not re-connect to the network after the home hub has dropped out. The original message I put in regarding this was moved to the BT Infinity Speed/Connection Issues forum but I still think this is an issue here. Is connectivity still an issue with the youview box or am I facing a problem? I have to restart youview whenever there has been an issue. I'd like not to have to do that. It should realise (several hours after the hub has restarted) that the network is present and use it.

JohnKelly wrote:
walkerx wrote:
Dave123 wrote:
I've seen the same situation with the G4 when HH5 reboots/powers off. The G4 needs to be put into standby to recover the network connection.
You should be able to just go into settings and redetect the network - try this before performing a full power off
Tried successfully. Don't know why I never tried it before. It's a lot easier than rebooting the box
Get used to doing it on a regular basis especially as the HH5 reboots at least every 30 days

Similar Messages

MacBook Air does not automatically connect to network

The MBA automatically connects to the network when the network broadcasts the SSID, however when I don't broadcast the SSID then I have to manually setup the network in order to connect to it. On a Windows PC running XP there is a checkbox that allows the computer to connect to networks that are not broadcasting the SSID. Is there any such thing for the MAC?

You can setup a network location on your mac and select a preferred network for the mac to join.
However there is no reason not to broadcast an SSID. It does not make you any more secure as wifi sniffing software can detect hidden networks just as easily as none hidden ones. It gives a false sense of security. The only wifi protection you should consider using is WPA or WPA2.
Is there any such thing for the MAC?
FYI a MAC is not a Mac
MAC=Media Access Control
Mac=Macintosh

Icloud mail does not work over cellular network after upgrade to IOS 8.1.3

Hi,
Since I did the update to IOS 8.1.3 on my iPhone 6 Plus yesterday, my icloud mails cannot be received/sent with my phone over the cellular network.
In order to make mails workin' I need to be connected to a Wifi network.
All setting are correct on the phone.
How can I fix this **** issue.
Deleted the icloud account already and added it again but that does not help.
Also when I try to connect to iCloud from the iCloud settings it says: Authentication Failed - A server error occurred.
The password is correct.
Please help me.
Jerry

I Fixed it by trying to sign in with a different ID and canceling when it asked For a password and then signed in with my ID and it works! No more error message. I got this idea from another discussion. Thank you for replying though.

Ipod touch will not stay connected to network after trying to use scrabble

I had a new ipod touch and purchased the scrabble app from EA games. I could not log into facebook to load my games onto the app on my touch. The ipod would send me to my home page and disconnect me from the internet. Eventually my ipod would not connect to the network at all. I called Apple and they determined that the ipod was faulty and sent me a new one. Upon receiving the new ipod I downloaded and tried to use Scrabble again not thinking that the problem was the Scrabble app from the get go. Now again my ipod will not stay connected to the network. I have deleted the Scrabble app and reset my network settings and still nothing. It will occasionally connect but I cannot do anything with the ipod. However, it will work when plugged into my computer. I have contacted EA Games with the problem and they have "escalated my issue to their expert team", but I have yet to hear anything back from them. Anyone else having similar issues and know how to resolve this?

See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

Airport Express (1st generation) does not reconnect to wireless network after router is cycled on/off

Operating System: os x 10.9.1
Airport Utility 6.3.2
Airport Express 802.11n (1st generation)
Linkus router: Model WRT310Nv2, Firmware Version 2.0.01
Motorola Cable Modem: Model 2210-02, Firmware 7.7.3r5
The Airport Express (AE) is setup to join my wireless network using Airport Utility. A printer is connected to the AE with a USB cable. After the setup the AE light is green and the printer can be accessed over the wireless network.
The problem starts if the router is cycled off/on. Now the AE will not rejoin the wireless network and there is a non-flashing amber light. If the power to the AE is cycled off/on the AE reconnects to the wireless network.
This is about as handy as a screen door on a submarine.
Is it possible to see the setting of the AE the same way the modem and router settings can be accessed? Can this issue be fixed?

If they send you a replacement printer it will have ink tanks with it. You can store the ink tanks from your current printer and use them later on you "new" printer if you wish. Store them nozzle-up so they do not leak.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

My Apple TV does not see any wifi networks after 7 update.

i Have recently updated my Apple TV to 7 and ever since then I cannot see any wiif networks. I can connect through wired connection and works fine. I have tried Apple troubleshoo page and nothing works. Any ideas?

Hi, Cgomez8889.
Thank you for visiting Apple support Communities.
Here are some troubleshooting steps that I would recommend when experiencing this issue.
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS4546
Cheers,
Jason H.

Iphone 4 does not stay connected to my network

Since upgrading to 6.1, my iPhone 4 does not stay connected to my network. I have to input my password each time I leave my house. My other devices stay connected, so the issue is with the upgrade. Has anyone found a way to keep their IPhone connected to their network? Thanks.

I don't have another phone to try. I took out the sim to check for deffects but it looked fine. Cleaned the sim card with alcohol and cleaned the aim compartment. Phone didn't loose Internet connection all day yesterday, but this morning went to check emails and wouldn't update until I turned airplane mode on then off again.

Does not automatically connect to wireless network anymore

Mac Book does not automatically connect to know networks any longer.

Hi sashton,
When troubleshooting Wi-Fi connectivity issues, I find the following resource has the most relevant information:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Furthermore, you may want to avoid giving your network a common name. While the following article (and excerpt) refer to iOS devices, the same applies for your Mac:
Avoid giving your wireless network a common name (SSID)
http://support.apple.com/kb/HT4450
If you were to give your wireless network a common name (SSID), users of your network who use iOS devices [sic] and are away from your network would run the risk of joining a different network with the same name. Having joined the unexpected network, they would be exposed to potential data theft.
Because of this security issue, Apple maintains a list of common or ambiguous SSIDs, including the default SSID for many commercially available access points, as well as the SSIDs "wireless" and "default". If your network's name is on the list, any iOS device [sic] that joins the network stores the access point's BSSID and associates it with the network's SSID. Subsequently, it will only auto-join the network if the access point's BSSID matches the information the device has stored. This avoids joining a different network with the same name.
Therefore, you may want to refer to the following article when configuring your Wi-Fi router:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Thanks,
Matt M.

IPad (3rd generation) does not automatically connect to wi-fi.

iPad (3rd generation) does not automatically connect to wi-fi. It is fully updated to 5.1.1 but you have to manually connect after turning off and back on. I also have an iPad 2 with the same OS but it automatically connects. The wi-fi has no security.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Getting Error message ""This set top box does not match the account settings"

Just ordered a new wireless receiver for the bedroom. Installed it and now getting the following error "This set top box does not match the account settings". Service was suppose to be enabled on Monday the 4th, but I recieved the hardware early and turned it on. I've since rebooted and unplugged and tried everything to no avail. Any thoughts on how I might get this to work? Regards, Rick

your wireless receiver is misconfigured (dirty) and need to be scrubbed clean.
A tech (service visit) or tier 2 rep (phone or chat) can do this. The receiver needs to be unplugged, on the bottom of receiver is a GUI (long number) that will be needed to identify receiver, when instructed plug just the receiver in that gave number for, when that one is connected.
Your choice 4 hour appointment window, or time on phone , or chat.
If these have not been activated yet.... When screen comes up, depress OK on receiver, depress button on WAP, when the screen at receiver says try again, Depress OK button (remote or on stb) another screen for update, depress OK give about 10 minutes to load, reboot when checking depress menu to verify recordings, if no recordings menu not finished booting.
Set aspect ratio MENU, OPTIONS, etc.
should take about 20 minutes per receiver.

"save as" pop up box does not allow me to save the document.

Hello ,
"save as" pop up box does not allow me to save the document. Shows a blank screen. Any idea what would cause this? I just purchased acrobat pro dc.
Thanks!

Found this solution:
The default "Save As" dialog in Acrobat DC is different than the dialog that you've had in earlier releases of Acrobat, it also allows you to save to the cloud and previous locations you've saved files to. It is possible that when Acrobat tries to connect to "the cloud", it runs into problems. You may want to try to turn this feature off to see if that brings your save as dialog back: Open up Acrobat's preferences, then go to the "General" category and deselect "Show online storage when saving files":

My search box does not display suggestions even though it is set to (it displays past searches, but not suggestions). I have looked at the FAQs and everything is set for it to show suggestions.

My search box does not show suggestions although it is set to show suggestions.

MMS is a carrier issue... contact Verizon and ensure your account is provisioned correctly. I would think that someone would be intelligent enough to do that before buying a new device, but......
iMessage could be an activation issue or a network issue.
Have you tried Settings > General > Reset > Reset Network Settings?
Does iMessage work consistently on Wi-Fi?

Wifi does not automatically connect on iMac

When turning on my imac intermittantly the wifi internet connection does not automatically connect and when this happens i have trouble manually connecting it, resulting in me turning airport wifi on and off upto 5 times.
I am running OSX Lion V 10.7.4.
Any sugestions?

Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
old... http://docs.info.apple.com/article.html?artnum=106653
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
Or whatever Interface you use.

Wicd does not automatically connect to eth0

Wicd works fine using my wireless network. It does not automatically connect to eth0 when I plug in a cable, but I can connect to it by pressing connect manually.
I already have ethtool installed (do I need to run ethtool as a daemon???)

stabele wrote:I have two maybe naive question:
1)are you connected to wireless network before you plug in ethernet cable? If yes, than wicd does not automatically switch to wired network. Maybe you can get it done by custom scripts wicd support for each connection, but I never used this thing in wicd.
2) do you have disabled in rc.cong interfaces you want wicd to manage INTERFACES=(!eth0 !wlan0) ?
Thanks for your answers, 1) no I'm not connected to wireless, and 2) eth0 is disabled.
I found out it works fine if I connect eth0 manually and then I can remove and plugin the cable all I want and it automatically connects. This is because dhcpcd is already running for eth0 so maybe I should run dhcpcd eth0 in a boot script (although I think wicd should do this).

Network does not work or the network signal attenuates rapidly

Network does not work or the network signal attenuates rapidly

Hello shishir_teamo,
If you are having issues with Wi-Fi on you iPhone 4S, check the following article that will help troubleshoot the issue.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for using Apple Support Communities.
Regards,
-Norm G.

YouView box does not re-connect to network after l...

Similar Messages

Maybe you are looking for