YouView+ box HD channels cutting in and out

Hi,
I have just set up my YouView+ box I recieved today but when i try to view any of the HD channels i can view the channel for a few seconds then the picture breaks up and then cuts out completly for a brief second then it reappears then shows for a moment pixelates then cuts out again over and over.
In the TV Signal & Quality section the Signal strength shows between 52% and 58% and the Signal Quality is at 100%.
When the picture cuts out the readings in the Tv Signal & Quality window reset to zero and then it comes back again over and over.
I have tried re-tuning the box several times and I have reset the box to its default several times but the problem stll happens.
Any help is appreciated.
Solved!
Go to Solution.

Hi,
Thanks for the advice, i tried that solution but it was still failing to show HD channels correctly after a re-scan.
I have now solved the problem. In the Aerial system i have an amplifying distribution box in the loft.
I bypassed this distribution/amplifyer and now the siginal strength shows a steady 65% and signal quality is 100%
and all the HD channels are now displaying correctly.
hopefully this might help someone with the same issue.

Similar Messages

SUBTITLES CUT OFF AND OUT OF BOUNDING TEXT BOX

SUBTITLES CUT OFF AND OUT OF BOUNDING TEXT BOX
by Ben Martin on Jun 24, 2008 at 9:57:39 am
I use Encore version 2.0 and have problem with subtitles on a 30 minutes video. I have not imported these subtitles, but made them, one clip at the time. The first 10 minutes is fine, each subtitle is within a bounding box (the bounding box was stretched up to the first inner rectangle of the Safe Area). They can be seen fine on the timeline and on the DVD.
However from one particular subtitle onwards, all the subtitles clips seem to suffer from the same problem. When I play them on the timeline the long subtitles are cut off at the right end. When I click on them within the monitor, I see that they are not within a normal bounding box. Instead the text is sort of "embedded" within a structure of white squares (similar to a bounding box), but any attempt to strecth that "structure" by pulling a square with a text tool, only deform and extend the text itself.
I have tried to create a blank subtitle clip after the last "good" one, using the Add subtitle button on the monitor, but it won't create an empty bounding box within which I could type or paste the text. It works if I try to create an empty clip in the "good" area of the time line (the first 10 minutes), but not before or after that first bad clip I mentioned above. It is as if there was something bad on the timeline and any attempt to create a proper bounding box clip is impossible.
Is there a setting that I can change? or is it a bug in the programme?
Any help would be appreciated. Thanks.
Ben Martin
Payday

In order to aviod stretching the existing text, you must use text tool to resize the boundry box.

Xfinity X1 - TV Sound Cuts In And Out When Connected to Surround Sound Receiver

I'm a fairly new Comcast Xfinint X1 TV and Internet subscriber. I am experiencing issues with TV sound cutting in and out. The sound cuts out for 2-3 seconds, all the time. The Onkyo surround sound receiver has been used without issue on a different cable TV platform so I know there is nothing wrong with the receiver. System set-up. Voice/data modem - Arris Interactive, LLC - tg862gCable Box - Make/Model - PA px001ancSurround Sound Receiver - Onkyo TX-NR609 HDMI cable run from cable box to Onkyo receiver. HDMI cable run from Onkyo receiver to TV. I have reset all equipment multiple times with no resolution. Any help would be greatly appreciated as it is very difficult when trying to watch TV.

I highly doubt your modem has anything to do with this because it doesn't have MoCA.However it sounds like you an original green power light Pace DVRs and they are well known to have audio dropout issues. I would replace that DVR with a different version.
Is this problem happening on a specific channel? CBS seems to be having issues lately. I am watching the CMA awards right now and I have heard the volume change a couple times but this is the only channel it is happening on which would suggest it is not Comcast's fault.
spv510erp wrote:
I'm a fairly new Comcast Xfinint X1 TV and Internet subscriber. I am experiencing issues with TV sound cutting in and out. The sound cuts out for 2-3 seconds, all the time. The Onkyo surround sound receiver has been used without issue on a different cable TV platform so I know there is nothing wrong with the receiver. System set-up. Voice/data modem - Arris Interactive, LLC - tg862gCable Box - Make/Model - PA px001ancSurround Sound Receiver - Onkyo TX-NR609 HDMI cable run from cable box to Onkyo receiver. HDMI cable run from Onkyo receiver to TV. I have reset all equipment multiple times with no resolution. Any help would be greatly appreciated as it is very difficult when trying to watch TV.

Sound cutting in and out on Macbook Pro 15 (original) when waking display

When I wake the display from sleep, any audio that was playing when the system went to sleep - or rather, the display went to sleep (ie: pandora, QT movie, etc), immediately starts to cut in and out and gets glitchy. This happens as soon as I move my mouse and get the dialogue box to enter my un/pw to wake from sleep. The only way to resolve it is to quit the application putting out the audio, and then open it up again. Once I do that, the problem goes away.
Currently running 10.6.2, but have had this problem since upgrading to Snow Leopard. I've searched the forums and can't seem to find any answers. There are a lot of vague sound issues with MBP and this is a hard one to "sum up" in the subject line. Any help would be appreciated. Thanks.

I've searched the forums and can't seem to find any answers.
Not even quitting out the audio application prior to letting your computer sleep?
Not sure what you have already tried from searching the forums. If you have Applecare, give them a call or take your computer to an Apple store. Let the Geniuses there check it out.
Message was edited by: CMCSK

Audio Is Randomly Cutting In And Out In Playback

I have encountered this problem on all recent Premiere projects I've worked on with a variety of audio types. My audio is cutting in and out in a seemlingly random way while the video keeps running fine. Sometimes the audio will play fine for 15 seconds then stop, sometimes it stops and starts after about 2 seconds. I have tried adjusting all of my preferences, settings, audio types, and even video types but the problem always comes back. Spoke to a friend who's new to Premiere and he's having the same problem. Considering moving back to FCP despite the weak interface.
Currently I am editing Canon 5d Mkii footage at 1080p, 29.97 fps. I am using none of the audio attached to the video clips - only editing to a separate m4a music track. My audio is at 44100 Hz. I am playing back video at 1/4 quality. I am running a fully updated Mac Powerbook with a 2.6GHz Intel Core i5 and 8gb of RAM.
Please help, almostly completely unable to edit. Thanks.

I am still having the same issue in Premiere CC 8.0.1 (21)
Exact same issue as the original poster on this thread, as well as the original poster on this other thread:
Premiere Pro CC Audio Cuts Out
So this audio issue persists from version 7 now in version 8.0.1!
For me, audio is cutting in and out randomly and never in the same place. If I have multiple audio tracks on the timeline, then one or more tracks might drop-out at the same time. Sometimes all tracks drop out at the same time. It seems completely random.
I am editing with a combination of P2 footage and DNxHD 290 footage. (I originally had some AVCHD footage, but then I transcoded all of it to DNxHD 290 -- but this did not improve the audio issue at all.)
Two of my audio tracks contain the native camera audio (stereo); 1 track has the music bed (stereo .wav files) and 1 track has sound effects (stereo .wav files)
In one of my projects, I had a very strong reverb effect applied to the track (not to the clip). When the audio dropped out, I could still hear the tail of the reverb. This leads me to conclude that it's not the entire audio track that is muting -- it's definitely the source audio clip that's dropping out. The reverb tail continued after the audio dropped out.
Playing the same part of the timeline again produces randomly different results -- audio might drop out on a different track, or at a different time, or not drop out at all.
This bug is making it nearly impossible to edit! I have filed a bug report at http://www.adobe.com/go/wish_fr
During timeline playback, my CPU utilization never goes above 15% and at least 12 GB of RAM is staying free, so I am pretty confident these drop-outs are NOT caused by lack of computer resources. Also, my hard drives seem to be fast enough to play back 4 streams of HD simultaneously, but I am getting these audio drop-outs when playing back 1 stream of HD plus 4 channels of audio. Therefore, I don't believe this can be a hard drive bandwidth issue.
System specs:
Windows 7 64 bit, SP1
RAM: 24 GB
CPU: Intel Xeon X5680 @ 3.33Ghz (12 threads)
VIDEO: NVIDIA Quadro 4000

Airtunes cutting in and out when using the internet.

Hi all,
I know this topic has been covered before and there is a support page for this problem on the apple website but I haven't been able to fix the problem using either hence the post so sorry for repetition.
As the title says my airtunes keeps cutting in and out, but it only seems to happen when I am actively using the internet. What I mean to say is that if the internet is connected and sitting there dormant it works fine, but as soon as a start to surf or download it cuts out, the higher the download/upload rate the longer the cut outs are until it stops all together.
My network contains the following,
2 Computers (1 iMac and 1 MacBook Pro)
1 Airport Express
The iMac is the host of the network, it also is the provider of the internet via a USB mobile broadband stick shared out via Airport (which cannot be connected directly into the Airport Express). Airport Express is used purely for Airtunes.
I could not change the channel setting to test for interference in Airport Utility as the iMac was the host. I tried changing the whole network channel on the iMac but the cut outs still occurred.
I use the MacBook Pro to send the audio from iTunes to Airport Express, distance would only be about 4 meters with no physical barriers such as stereo/cables/walls etc.
Any suggestions would be much appreciated.
Cheers,
Jarrod.

Any idea's please?

Airport Base Cutting in and Out

My Airport base station has started cutting in and out and restarting it only sometimes works. Once returning to detectable signal, it may work for seconds, minutes or hours.
For four years, we have had a flat-screen iMac, an eMac and a network printer working without a hitch. Recently, We added a MacBook Pro, also without a glitch. Suddenly, in the past three days, the signal has frequently become undetectable, even at the iMac only 2 feet away.
Clearly, it does return to use, as I am using it now. Leaving it in use (e.g streaming a radio over internet) seems to keep it active, but I am not sure for how long.
I've tried it all: turn Airport on and off; unplug and re-start base station; unplug and re-start DSL modem; repair permissions; name it.
The unit seems to have spontaneous regeneration as it seems to work after sitting unused for a while (though I have to log back in, which I have not had to do in the past).
All three computers are running 10.4.5 and all have the latest Airport updates.
Is there something else to try? Do I just go for a new base station? Could it be something outside--DSL, electronic interference, etc? (No new electronics in the house.)
Airport Base Station (not Extreme--Snow?) Mac OS X (10.4.5)

yes, am experiencing a similar problem.
brand new iMAC intel, with firmware upgraded. 10.4.6
when I try to do a software upgrade, I can begin the download. it goes for about 2 mb or so, and then cuts out.
no signal, download is stopped...but a few seconds later the airport signal is back on at full strength.
am going to try the suggestion of channel change
georg

Surround sound receiver is causing Apple TV to cut in and out.

My Apple TV is cutting in and out and I think my Marantz surround sound receiver is causing it because when I hook Apple TV directly to the TV it works fine. I looked at my receivers owner's manual but did not find anything helpful. Any idea how to resolve it?

Welcome to the Apple Community.
Check that the wifi channel is set to the same channel as on your previous router, also check the multicast rate is identical.
If the problem persists, you might also want to see if netgear have a forum or a help number and ask there.

AirPlay Audio Cuts in and Out

I have had major issues in the past six months with the audio from my AirPlay where there used to be none. For a long while I used an elaborate setup from my 2nd gen AppleTV, to a optical audio out to a quarter inch converter to an AudioEngine wireless dongle to my receiver with flawless results between 2013 and late 2014. When problems started occuring I naturally figured it was the wi-fi network, I did some serious reconfiguring to get as strong and clean of a wi-fi signal as possible, still had the issues. I finally decided to simplify the whole setup to an AirPlay compatible Denon AVR-x1000 stereo that hardwires to my wireless router. All was good for a week, now its worse than ever, even resetting the internet and the router will not seem to get the AirPlay from cutting in and out. I have an iPad, an iPhone 5 and a Macbook Pro, and an AppleTV all connecting to the receiver. All have the same cut in and out problem that existed before the receiver and after. It seems every update makes things less stable not more. Is there someone who can help walk me through a fix or just tell me AirPlay no longer works so I can stop trying?
Please help!!!
Here is my setup -
Macbook Pro 15-inch, Mid 2012 - 2.6 GHz Intel Core i7, 8GB RAM Running OS X Yosemite 10.10.3 connected by Wi-Fi
Denon AVR-X1000 AirPlay enable receiver connected directly to router via ethernet
Netgear Dualband Wireless-N Router WNDR3700 - 2.4GHZ Channel has a 92% Signal and the 5Ghz has 85%
Internet Connection is fast and consistent 72MBps Down 10 Up
2nd Gen AppleTV connected via Wi-Fi
iPhone 5 iOS 8.3
2nd Gen iPad running iOS 8.2
I have shut off bluetooth on anything that has it to avoid interference. The video of the appleTV works just fine and the Airplay Icon is consistently available, this is an AUDIO issue.
***There is another 2nd Gen Apple TV in a separate room (weaker signals all around) connected to the same network that works flawlessly streaming audio and video from any device.***

Hello Mikeh42,
Thanks for using Apple Support Communities.
To troubleshoot issues with AirPlay please follow the steps listed in the article linked to below.
Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch
Take care,
Alex H.

Having a problem with iphone 4S. Phone calls are getting dropped and cutting in and out.

I seem to have very little or no service at all recently.
All my calls are cutting in and out or hanging up in the middle of a conversation. I have to stand in the corner or my kitchen to get a clear call or get at least 2 bars.
I called Verizon yesterday and tried a few things they suggested but nothing worked.
I dont have another phone to call them back on since they suggest we call from a different phone until the late evening. Someone was supposed to call my back and never did.
Not sure on what else to do.
I am extremely frustrated and annoyed that I cant even really use my phone.
HELP

If the on/off switch does not work, that is a hardware problem. The other problems may be related to a hardware problem or faulure as well.
Make an appointment at an Apple store if there is one nearby to confirm.

I have an iphone 2g unlocked for tmobile. For the past 2 years it has worked fine then out of no where I get this message "your selected cellular network is no longer available" and the service cuts in and out all day. It can't find tmobile on my phone?

I have an iphone 2g unlocked for tmobile. For the past 2 years it has worked fine then out of no where I get this message "your selected cellular network is no longer available" and the service cuts in and out all day. It can't find tmobile on my phone for some reason but for 2 years previous it could no problem? tmobile says it is a problem with my phone and not their service.
Any ideas what to do?

I would just explain that this just started happening, that nothing has changed on the phone, that it is an original iPhone and I wondered if they are implementing a change in coverage with their Edge network in my area.
If you restore your phone, you will be given an option to back up your phone at the beginning of the process (see step 6 here: http://support.apple.com/kb/HT1414). You will be given the option to restore to that backup at the end of the restore process. Your messages are stored in the backup so restoring to the backup will return the messages to your phone. Be sure to import your photos and videos to your computer (see http://support.apple.com/kb/HT4083) and back up your contacts somewhere before restoring your phone as these sometimesget lost in the restore process.

I have iTunes version 10.7.0.21 for Windows 7. It was working fine untill recently. Now when I play a T.V. show the audio cuts in and out, the video pauses intermittenly and also intermittenly fast forwards. What is causing this and how do I fix it?

I'm having problems with video play back in itunes 10.7.0.21 for windows 7. Video was playing fine, but now I'm having audio issues. Audio cuts in and out. Also video pauses and fast forwards. Does anyone know what would cause this all the suddenly? More importantly does anyone know how to fix this?

All sorted now. Thread can be closed!

Logic Pro X Audio cutting in and out

When I am trying to record in Logic Pro X the audio seems to cut in and out at random points.
I have a MP3 track that I am recording to and it just randomly cuts out. Even when just playing that track by itself the same thing happens though never at the same spots. If I open the MP3 in Itunes or Quicktime there is no problem with the track.
As this seriously messes with the time of the piece and makes the recording long and painful I need help.
Is there some type of connection I am missing? I am using an old Presonus Firebox as an Interface, it unfortunately has adaptors to take it from firewire to thunderbolt. Recording into a 27" Imac that is very souped up and shouldn't have any problems until I hit a hundred tracks or so and I am only trying two.

It's most likely the Fusion drive, one of the symptoms is audio cutting out.
There are several related threads in this forum regarding audio problems with the Fusion drive.
This thread alone would take a couple of days to read.
https://discussions.apple.com/message/24709429#24709429
A fix is supposed to be coming in the next operating system update.

TS3367 FaceTime sound is cutting in and out

Since updating to os7 the sound on FaceTime calls is cutting in and out. I'm on iPhone 5 and the other person is on iPhone 4 , the other persons sound is fine. This only began when I updated to the new operating system.

reset all settings
settings-general-reset-reset all settings
now reconnect to wifi
settings- wifi- click network name- enter password - join
if issue persists back up and restore as new via iTunes
Peace, Clyde

Anyone help, my laptop cuts in and out of charge

When on charge, my loptop cuts in and out of charging making the battery go down. I have only had laptop for one month. Is this a common falt?

SMC = system management controller.
Here's the long answer. The power adapter senses power problems both at the input and the output - I mentioned protection circuitry at the DC output end. When the power adapter senses an AC line voltage input problem (even if it's less than a cycle), the adapter may momentarily stop charging. I believe that's what is happening to you. There are many reasons that this could happen: loose AC wiring at a switch or outlet, loose ground wire, line in-rush over-voltage, even something as simple as someone cycling a flourescent lighting fixture can cause a problem. To resolve this, you can:
Try a different power adapter. Due to a internal component tolerance stack-up, an adapter may be hyper-sensitive to AC line noise. If a second power adapter does the same thing, you can:
Get an AC line conditioner. I'm guessing a $75-100 unit would do the trick. If that doesn't work, you can:
Use the ungrounded, two-prong "duckhead" for the power adapter.
Cheers!

YouView+ box HD channels cutting in and out

Similar Messages

Maybe you are looking for