YTD for an emp not correct

We went live in middle of feb. We have issue with one of the wagetypes. The ytd for that wagetype is not correct. I just want to correct the YTD for the employee for that specific wagetype. I dont want it to impact anything else...i mean current deduction or previos deductions.
How can I do this.

To correct the YTD in the CRT is quite tricky, requiring special WTs and PCRs, but correctiong the YTD in the TCRT is usually done through Off-Cycle Year-End Adjustments (also requiring a series of special WTs).

Similar Messages

Distribution system for logical system not correctly maintained

Im logged in into SAP R/3 system. When starting transaction POIT I chose "production orders for".
I fill in the fields for
Plant -> 001
Material -> T-HV200 (Ice Mix)
At the top I have to enter a "optimization system".
I chose the logical system I created (CE6CLNT850) from a list.
After I hit the execute button it says:
"Distribution system for logical system CE6CLNT850 not correctly maintained."
The distribution model for CE6CLNT850 (transaction: BD64) looks like this:
Componentsystem CE6 SAP R/3 4.6c----
CE6CLNT850
NX7CLNT800----
NX7CLNT800,No Short text exists
LOIPRO----
Production order
What is the problem here?
And by the way, WHY DO I HAVE 479 entries in my list of logical systems when I'm trying to chose the "optimization system"???
best regards,
Lunatikk

Thanks for your answer,
the RFC destination is configured correctly. It says that the connection works when I run the test.
I'll post it in an other forum as you suggested but I have another question:
You said that it is possible to have 474 logical systems configured on the system.
1. Who defined those systems and why?
I am the first one in my company using this system.
We ordered to a SAP system through RAC Service.
I thought we would get a "fresh installation" of the SAP system -
2. please correct me if I'm wrong.
For example there are logical systems with names like "boon software" and "camstar", which are real companies.
There aren't just logical systems configured, there are also additional RFC destinations, distribution models and ports that were there from the beginning.
3. Is it possible that those logical systems interfere with the sending of the IDOC. Could it be possible?

URGENT: Reconiliation account is blocked for posting or not correct

HI,
i am working with IS utilites ... electricity...
i am getting this error during invoicing...

Hi,
First of all, check and see if the reconciliation account is not blocked for posting in FI, use transaction FS00 for this.
If you don't get a reconciliation account with this error, you must determine what main transaction is used for invoicing and check if the account determination is correct using transaction EK01. You must make sure that the combination of company code, division, account determination ID and main transaction gives you the correct reconciliation account.
Please let me know if this helped or provide some additional information about the error.
Bogdan

HT5824 My email address on my iphone for icloud is not correct and I cant figure out how to fix it.

How do I change the user id and password for my icloud to the correct user id and password. In other words its wrong.

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Detection of MS 982726 for 64bit Office not correct

Was trying to figure out why the filter update for 64bit windows is showing
up for all our devices when we are using 32 bit Office 2010. Checked out
the debug.log and noticed both the 32 and 64 bit detections of the patch are
looking in the same location. The 64 bit should not be looking in the
'Program Files (x86)' but in 'Program Files'
Filename : [MS 982726 Outlook 2010 Junk E-mail Filter Update (December 2012)
(All Languages) (64Bit).pls]
OS Platform : [Microsoft Windows 7 Professional x64]
Library Build : [5.2.2][Sep 25 2012 16:01:07]
Finished Importing
Detecting
File [C:\Program Files (x86)\Microsoft Office\Office14\OUTLOOK.EXE]
File Version Found: [14.0.6109.5005], Check Against: <= [15]
File Version information within specified range
File [C:\Program Files (x86)\Microsoft Office\Office14\OUTLOOK.EXE]
File Version Found: [14.0.6109.5005], Check Against: >= [14]
File Version information within specified range
File [C:\Program Files (x86)\Microsoft Office\Office14\OUTLFLTR.DAT]
File Version Found: [14.0.7605.1090], Check Against: >= [14.0.11829.524]
File Version information NOT within specified range
Finished Detecting
Opening file:
MS 982726 Outlook 2010 Junk E-mail Filter Update (December 2012) (All
Languages).pls
Importing
Filename : [MS 982726 Outlook 2010 Junk E-mail Filter Update (December 2012)
(All Languages).pls]
OS Platform : [Microsoft Windows 7 Professional x64]
Library Build : [5.2.2][Sep 25 2012 16:01:07]
Finished Importing
Detecting
File [C:\Program Files (x86)\Microsoft Office\Office14\OUTLOOK.EXE]
File Version Found: [14.0.6109.5005], Check Against: <= [15]
File Version information within specified range
File [C:\Program Files (x86)\Microsoft Office\Office14\OUTLOOK.EXE]
File Version Found: [14.0.6109.5005], Check Against: >= [14]
File Version information within specified range
File [C:\Program Files (x86)\Microsoft Office\Office14\OUTLFLTR.DAT]
File Version Found: [14.0.7605.1090], Check Against: >= [14.0.11829.524]
File Version information NOT within specified range
Finished Detecting
Jim Koerner
Server - ZCM 11.2.2 w/MU1 and Internal Database on Win2008R2x64
Client - ZCM 11.2.2 w/MU1 on Win7SP1x64

I will, but my track record on patch fixes is pretty dismal. My system
management patches on 64bit machines SR has been going on for 8 months but
supposedly fixed in 11.2.3 and a most other patch SRs were multiple months.
That’s the main reason I laid off new SRs for them.
They seem to have a real low priority which I can understand if you are
talking about a single patch with issues.
Jim
"Shaun Pond" wrote in message
news:[email protected]..
Jim,
can you open SRs for these? It's the quickest way to get them updated
Shaun Pond

BSD name for volume is not correct

Hoping someone can answer this one
I have recently had a HD crash, and purchased a new drive which I installed Tiger on over USB. I have now put the new drive into my Macbook, but booting briefly shows the ? Folder and takes longer and I notice that the BSD name for the drive is disk0s2. (everything seems to run fine otherwise). I assume (and seem to recall from my old installation) that it would normally be disk0s1? putting two and two together i figure this is what is causing the slight boot issue. Can anyone advise me as to whether this should be changed and how? I have set the startup disk numerous times and seem to have no luck there.
Cheers

Hi Alexandre,
You can insert a report title in FileSummary Info..This will help you.
You can insert report execution data and time in the report and it is not possible to use as report name.
Thanks,
Sastry

Report name for Export are not correct

Hello,
When I'm doing an export on PDF or XLS, the file name is wared, it's not taking the name of the report or in the TOP of the tree navigation in the PDF
- Is it possible to have the rigth name ?
- Is it possible to have the name depending on some values of the report, like date of extraction ?
Thanks in advance
Alex
Edited by: Alexandre VANNIER on Oct 15, 2008 11:47 AM

Hi Alexandre,
You can insert a report title in FileSummary Info..This will help you.
You can insert report execution data and time in the report and it is not possible to use as report name.
Thanks,
Sastry

Outlook to iPhone sync failure – Sync suddenly stopped working for calendar events but continued for contacts and notes.   Finally Fixed!!! SUPPORT TEAM – PLEASE SEE THIS – Complete explanation of cause and correction steps.

The issue: Outlook to iPhone sync failure – Sync suddenly stopped working for calendar events but continued for contacts and notes.   Finally Fixed!!!
SUPPORT TEAM – PLEASE SEE THIS – Complete explanation of cause and correction steps.
The cause: It is now clear what caused this problem. For years I had several “all-day” events in my Outlook calendar (birthdays, anniversaries, etc.). In May 2012 I decided to make some of them one hour events so I could add alerts to remind me of the event. I did this by dragging them in Outlook to the time I wanted and expanding them to the time slot desired and then adding the alarm.
The symptom: Syncing stopped working for the calendar but continued working for contacts and notes. I didn’t realize sync was failing until months later when I missed two very important phone calls, so when I noticed it the cause was not obvious.
The failed attempts: I’m head of a software firm and my calendar sync is a crucial to my business life so I took this on with a vengeance. From a quick look at events in Outlook and the iPhone I could see that the problem started in May 2012. Events before May were in both Outlook and the iPhone but events after May were only one or the other. Unfortunately I had changed several other things at the same time relating to other events so again the cause was not obvious. MANY calls with AppleCare proved them incompetent so my internal IT guys assisted trying many things. We tried a huge number of calendar changes and several versions of iTunes, iPhone OS and Office as well as both iPhone 4 and 5, all without success.
The fix: After 18 months of frustration, MANY hundreds of $ expense and MANY hours of wasted time I saw a blog that had a calendar sync problem and it indicated all day events were related. I changed the display of the Outlook calendar to the list view, added columns so I could see “all day” event check marks as well as times of events, sorted on the “all day” event column to move them to the top, and for all events that were “all day” events AND had a start and end time, I removed recurrence and then added the annual recurrence back…
After I fixed all events that had BOTH “all day” set and had a start/end time, I tried another sync. It synced for the first time in 18 months!
Problem occurred May 2012 – fixed Nov 2013

Hi, to remove dummy '_ModGrp' entries, rather than crashing the 'Suppr' key on your keyboard, you can use this basic VBA macro (launched for instance from Excel).
It will recursively remove all '_ModGrp...' folders
Sub RemoveFolders_Click()
    Dim oOutlook As Outlook.Application
    Set oOutlook = New Outlook.Application
    Set objNameSpace = oOutlook.GetNamespace("MAPI")
    Call CleanFolders(objNameSpace.Folders)
End Sub
Sub CleanFolders(objFolders As Outlook.Folders)
    For i = objFolders.Count To 1 Step -1
        If Left(objFolders(i).Name, 7) = "_ModGrp" Then
            objFolders.Remove( i )
        Else
            If Not objFolders(i).Folders Is Nothing Then
                Call CleanFolders(objFolders(i).Folders)
            End If
        End If
    Next i
End Sub

Apple ID username, password not correct for imessenger ios 6

i just upgraded to ios 6 on my iphone 4 and imessenger is fine to send and receive but when i go to settings and try to register it with my apple ID i get an error that the username and password are not correct, although i am usung the apple ID fine in app store for example. anyone knows what this is?
also, i was wondering, while setting up my iphone after the upgrade to ios 6, in one of teh steps when i started using the phone, it asked for teh apple ID password to do soemthing related to icloud, imessenger and facetime. it also gave the option on the phone screen to "skip this step" which i did, i skiped the stem and thought if i wanted to i can go back and do it manually from the settings any time. i think it was something related to downloading new features for the icloud. i messenger and facetime.
could this have been the case? but i mean if i had the option to "skip the step" it means that it is not something drastic and can always be done manually later.
anyone has feedback?

Hi again, well I can't answer that question, because my computer IS asking for my apple ID and password to install Rosetta Stone. I would have appreciated you taking the time to help me, if you had had any advice for me. Since I posted this, I have found the answer so I don't need your time anymore, however. I eventually went to my settings and SET a password, which solved the problem. I recently reset my computer and all my records had been wiped- I was unaware that my computer settings had deleted my old password which had been saved on it- not realizing that its data would be seperate from the other numerous places I have used it the past week since I got it back. An answer that would seem like a no-brainer, but since it hadn't needed to be done until then for any other previous installs since the reset, it appeared last on my to-do list.

Windows vista home premium service pack 2.error measage __(the windows installer service could not be accessed.this can occur if the windows installer is not correctly installed .contact your support personnel for assistance )no error nurber

windows vista home premium service pack 2。error measage __（the windows installer service could not be accessed.this can occur if the windows installer is not correctly installed .contact your support personnel for assistance ）no error nurber

Hi Abdallah,
According to your description, could you please post the summary and detail logs for further analysis? By default, the logs can be found in: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
Usually, the error occurs when the Windows Installer Service is not running or the Windows Installer registry settings are corrupted. I recommend you reset the Windows Installer Service settings in the registry and restart the Windows Installer Service,
then reinstall SQL Server 2008 R2. For more details, please review this similar
article.
Thanks,
Lydia Zhang

My IPad screen is frozen with a message stating that the IPad has not been backed up to the ICloud for 7 weeks, this is not correct.I cannot get the messageto clear and cannot access any of the other icons; is there an emergency reboot process?

My IPad screen is frozen with a message stating that the IPad has not been backed up to the ICloud for 7 weeks, this is not correct. I cannot get the messageto clear and cannot access any of the other icons; is there an emergency reboot process?

Have you tried resetting your iPad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
No data will be lost.

I connect my ipad it shows in left side of itunes it is commencing sync then it freezes itunes and i have to disconnct it manually then a error message telling me that there is not enough disc space for ipad which is not correct any ideas folks

i connect my ipad it shows in left side of itunes it is commencing sync then it freezes itunes and i have to disconnct it manually then a error message telling me that there is not enough disc space for ipad which is not correct any ideas folks

i have reset the ipad and restored it to no avail

ERROR: The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance.

Hello Everyone,
I keep getting this when trying to install 0r repair SQL Server 2008 R2 on a SBS 2011 Standard.
TITLE: Microsoft SQL Server 2008 R2 Setup
The following error has occurred:
The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1&EvtType=0xDF039760%25401201%25401
BUTTONS:
OK
the provided link says "There is no additional information about this issue" i am helpless
please tell assist.
Thanks.
Abdallah.M.M

Hi Abdallah,
According to your description, could you please post the summary and detail logs for further analysis? By default, the logs can be found in: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
Usually, the error occurs when the Windows Installer Service is not running or the Windows Installer registry settings are corrupted. I recommend you reset the Windows Installer Service settings in the registry and restart the Windows Installer Service,
then reinstall SQL Server 2008 R2. For more details, please review this similar
article.
Thanks,
Lydia Zhang

Validity slice is not correct for non-cumulative cube

Hello Expert,
There are two non-cumulative cube, say cube1 and cube2. Cube2 has only one more dimension of PLANT than Cube1.
Cube2 is copied from cube1 and change the char of validity.
Cube1 & cube2 use the same fill data source. That is, first load with opening balance and second with delta.
char of validity for cube1: calendar day & material
char of validity for cube2: calendar day & plant.
The query based on cube1 works well. To say cube2, the validity slice(in TXN RSDV or TBL /BIC/TCUBE2) is not correct. There is only one record which contains BLANK plant.
There are plants in F table.
I tried the following steps to recovery the validity slice, however, it made no sense.
1) PGM RSDG_CUBE_VALT_MODIFY to rebuild the validity slice structure
2) FM RSDV_VALID_RECREATE with I_REBUILD_FROM_FACT = 'X' to create validity slice from fact table.
Would you please suggest?
Thanks
XY

Hi XY,
For sure, running the RSDV_VALID_RECREATE function module in SE37 will recreate the validity table. And you can use the parameter "X" in the parameter I_REBUILD_FROM_FACT if the entire fact table should be read.
Also, to change the validity slice manually in tcode RSDV you should:
- overwrite the column 'To mode' with a 'F', which mean Fixed
- & then the 'Fixed to time' with your new value.
There is a program which allows you to modify it: Program > RSDG_CUBE_VALT_MODIFY
At
Nadja Xavier

My itunes says that it is not correctly localized for this language please run english version. how do i do that?

my itunes says that it is not correctly localized for this language. please run english version. how do i do that?

Let's try a repair install of iTunes.
Restart the PC first.
If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
Can you launch your iTunes now?

YTD for an emp not correct

Similar Messages

Maybe you are looking for