YTD value = month value when i put the 0FISPER above the columns ratios

Hello Gurus,
I have a 0fiscper in the prompt
In my report I have a YTD and it works fine.
But when I drag 0FISCPER above the key figures, YTD becomes equal to the amount of the month.
I will wish for example for Period 2 that YTD sums period 1 and 2 not only 2.
Do you have an idea ?
Regards,
Thierry

Hi Umashankar,
In my bex i have a key figure  YTD :
In my prompt i select 008.2014 for 0FISCPER, the YTD is OK  (sum from 001.2014 to 008.2014 )
If in my prompt i select all the year 2014  (top level of hierarchy) and
If i drag  0CALMONTH2 or 0FISCPER above the YTD in Analysis ( i think in Analyser is same)
I don't have for each period the sum, but only month's value
Regards,
Thierry

Similar Messages

  • How to put the column name and variable value in the alert message.

    Dear,
    how can i put the column name and variable value in the alert message text. i want to display an alert which tell the user about the empty textboxes. that these textboxes must be filled.
    Regards:
    Muhammad Nadeem
    CHIMERA PVT. LTD.
    LAHORE
    [email protected]

    Hello,
    The name of the item that fires the current trigger is stored in the :SYSTEM.TRIGGER_ITEM system variable.
    The value contained in this item can be retrived with the Name_In() built-in
    value := Name_In( 'SYSTEM.TRIGGER_ITEM') ;
    LC$Msg := 'The item ' || :SYSTEM.TRIGGER_ITEM || ' must be entered' ;
    Set_Alert_Property('my_alert_box', ALERT_MESSAGE_TEXT, LC$Msg ) ;
    Ok := Show_Alert( 'my_alert_box' ) ;
    ...Francois

  • How can I format an SD card on my mac?  I have tried the erase thing but when I put the card into my 35mm camera it says that the card has to be formatted.

    I just purchased two new SanDisk 8gb SD cards for my trail cameras.  When I put the cards into the trail cameras, the cameras will take pictures but it won't store them on the cards.  When I put the cards into my 35mm camera the camera tells me that the cards need to be formatted.  I have went through the steps in the disk utilities and erased the cards, which I assume is the same as formatting them??  I have tried this for hours and have had no luck getting these things to work at all.  It was awful disgusting when I checked my two trail cameras the first time and found out that they had taken close to 75 pictures but the cards were empty.  When I bought my 35mm camera several years ago, I bought a couple of Kodak SD cards and used them right out of the package and never had to do any of this formatting thing.  I don't understand what is going on and could sure use some help with this.  Thanks for any information anyone can give me with this problem.  I would love to have seen what animals set my cameras off 75 times in the last few days.  Thanks again.
    Respectully
    Jim

    AFAIK cameras offer their own built-in format utility for inserted SD cards.  You should use that.  Otherwise, refer to the manual that came with your camera to determine precisely how your SD cards need to be formatted to work properly.  Personally, I'd suggest Partition Scheme: MBR, and Filesystem: FAT32.
    Try to limit the number of formats you perform on the SD cards, though, as you're reducing their lifespan.  I believe formatting causes re-writes to a portion of the SD card that has fewer read/write cycles than the rest of the card as a whole.

  • In pages(not the New version) footer is over to the left, so when i put the page numbers in they don't sit right. How do i move the footer

    In pages(not the New version) footer is over to the left, so when i put the page numbers in they don't sit right. How do i move the footer

    The footer is not only to the left. To get the page number to the right you can use Format > Align right. That will make all page numbers move to the right. Is that what you want?

  • My internal hard drive isn't being recognized on my macbook pro but when I put the HD in my Mac Pro (desktop), the desktop computer recognizes the HD.  When I insert the installer CD on my laptop, it also doesn't recognize my hard drive. Please help!

    My internal hard drive isn't being recognized on my macbook pro but when I put the HD in my Mac Pro (desktop), the desktop computer recognizes the HD.  When I insert the installer CD on my laptop, it also doesn't recognize my hard drive. Please help! Thank you!
    I've also been getting an image with the folder and question mark. I've tried everything on the apple support page but it doesn't seem to work either.

    Well, I tried all of your suggestions and they didn't work -- no surprise because I was trying to backup to my external c.d. disk.  Duh!  The application for the home is in the mail.

  • HT2515 My iPad is saying I have a billing account but when I put the credit information in it doesn't work

    Hi,
    My iPad is saying I have a billing account but when I put the credit card information in it doesn't work correctly

    I did a Restore as you suggested and everything is fine.
    Thanks again.

  • My Contracted SIM is for an android phone, but when i put the sim in an iphone my 3g no longer works?..

    My Contracted SIM is for an android phone, but when i put the sim in an iphone my 3g no longer works?.. Is it because my 3g is only active on the android os and not the ios platform? Texts, Calls and Wifi work fine but the 3g doesn't work. My phone only shows 'GPRS' in the top left corner. Also I get a message come up saying "Could not activate mobile data network. You are not subscribed to a mobile data service".
    Any advice would be great.

    Hi hexonxonx, I'm on o2. Thanks for your advice. You are right. All I had to do was change one of my APN settings to mobile.o2.co.uk and reboot my phone and this sorted it out straight away! Thanks again. Much appreciated . I was thinking I was going to have to go back to an android phone to use my 3g again but this eliminated that need. Thanks.

  • Hi, My network went down earlier in the week.  Now it is fine, but my macbook airport no longer detects it and keeps asking for a WAP.  When I put the password in, it 'times out'.  I'm getting rather fed up.

    Hi, My network went down earlier in the week.  Now the network is fine, I can connect through the ethernet cable, but my macbook airport no longer detects it, when prompted, macbook will find it, but I get asked for the WAP.  When I put the password in, it 'times out'.  Prior to the network problem my macbook worked fine everytime. Anyone know the answer?

    My guess is all the issues are probably related and fall back to malware.
    AVG is probably correct in identifying malware. So I suggest you try some cleaning tools other than Emsisoft .
    ones I use (all of them one after the other until I find one that can cope) are;
    Roguekiller http://www.adlice.com/softwares/roguekiller/
    Malwarebytes anti malware Free http://www.malwarebytes.org/mwb-download/var2/confirm/
    ESET online scanner http://www.eset.com/int/home/products/online-scanner/
    So first create a clean boot in Windows using Microsoft's instructions https://support.microsoft.com/kb/929135?wa=wsignin1.0 and then run the anti malware applications.
    My outside looking in guess is that malware has set itself up as an internet proxy and is is downloading copies of itself and other malware, blocking some mail port as times as downloading more malware is more important, and probably breaking your tivo as well..
    Try the malware programs first. If that does not work I will try and talk you through some logging to see what is happening.

  • I converted from a PC to a Mac Mini.  I have my PC documents backed up on a DVD disk.  I have an external DVD drive connected to the Mac Mini.  I want to open them up and save them to the Mac, BUT....when I put the DVD disk in the Mac is NOT reading it!

    I converted from a PC to a Mac Mini.  I have my PC documents backed up on a DVD disk.  I have an external DVD drive connected to the Mac Mini.  I want to open these documents up from the DVD storage and save them to the Mac, BUT....when I put the DVD disk in the Mac is NOT reading it!

    Hi Joe,
    Thanks for your quick response.  I should add....it worked before.  When I previously inserted the two DVDs into this remote drive, and I went into finder, I could click on the "remote device" line and see all my saved documents (excel, word, etc) on the DVD and open them on the Mac.  Now I cannot see them, when I try to open them on the Mac, nothing happens, nothing is displayed.  I just re-tested the remote DVD drive with a CD and, no problem, it opened up the CD via iTunes and I cold play the CD.  SO......I know the remote DVD drive (it's an LG by the way) is fine, it's something to do with some settings on my mini mac,especially where I could open it previously.  I do not remember changing any settings since then. 
    When I go into system preferences and click on CD/DVD it gives me options of how to open up a music CD (default is iTunes), a DVD (default is iMovie), etc.  The problem is my DVD is all miscellaneious files/documents.  I just want to be able to see them in the finder.  I also tried to open them via microsoft word, from the remote disk and again, it could not open the drive, even though some of the documents were microsoft word documents.  Again, I was able to open them previously and the DVD is not corrupted in any way.  
    Any additional advice? 
    Thank you!

  • I can't connect my iPod classic to iTunes, it just doesn't react when I put the USB into the PC

    hey, I have an iPod classic and it can't connect to iTunes.
    I put the USB into my computer trying to add music, but it doesn't seems to react.
    It DOESN'T say that it can't recognize the Ipod..
    - Itunes just simpely doesn't react when I put the USB-cabel into my computer.
    - when i go to the task manager the "apple device mobile" and "ipod service" is acitve in the processes
    - I've tried to restart my computer (windows XP)
    - update iTunes
    - reinstall iTunes
    - restart my apple devices mobile manager
    what I think is the problem (which I can't solve) is that iTunes doen't even react to the USB
    plz hlp me!
    - ps it really should be able to add music to my iPod without getting help from a expert.

    Hello qz0rz213,
    It would seem that iTunes has encountered or developed an issue in the process of trying to sync photos to your device. The best place to start would be removing the iPod Photo Cache (thus allowing for a new version to be created).
    Note: Deleting this folder will not remove the original images from your library.
    iTunes: Understanding the iPod Photo Cache folder
    http://support.apple.com/kb/TS1314
    If the issue is not resolved by removing the iPod Photo Cache, the following article goes into further steps that can both help you determine the source of this trouble and eliminate it.
    Symptoms
    In certain situations, iTunes may display an alert or may be unable to sync photos to an iPod or iOS device. Examples include:
    After updating iOS, iTunes displays an alert that there is not enough room to sync photos
    This error appears: "The iPhone/iPod touch '[device name]' cannot be synced. The required file cannot be found."
    This article outlines steps to resolve these issues.
    iTunes: Unable to sync photos
    http://support.apple.com/kb/TS3697
    Cheers,
    Allen

  • My iPhone has a protective cover on it and I carry it in my pocket a lot.  Quite often when I take it out of my pocket the silent/ring switch is off and I am sure it was on when I put the phone in my pocket.  How can this be happening?

    My iPhone has a protective cover on it and I carry it in my pocket a lot.  Quite often when I take it out of my pocket the silent/ring switch is off and I am sure it was on when I put the phone in my pocket.  How can this be happening?

    Protective cover as in screen protector?  This would have nothing to do with the silent switch.
    If you're referring to an actual case though... take the case off and see if the problem continues.
    It may be as simple as the silent switch being lose, which will require a device replacement to resolve.

  • Hello I just bought the usb super drive and for some reason when I put the disc in and download the application it won't show.Just a bunch of words will show up.

    Hello I just bought the USB super drive for the mac book pro and for some reason when I put the disc in and I download the content and for some reason when I put the aplication just a bunch of random words come out,not the content the disc brings.

    Ok, I hope I'm not steering you in the wrong direction, but I've just found this on the support site for the software.
    Interchange Interactive Whiteboard Software System Requirements
    Please note: These discs work on Windows PCs only.
    Minimum System Requirements
    Pentium II 300 MHz processor
    Windows 98 / ME / 2000 / XP / Vista
    64 MB RAM
    50 MB free disk space if not installing onto hard disk
    1.44 GB free disk space if installing (recommended)
    4x CD-ROM drive
    800 x 600 screen resolution displaying 16-bit color
    Sound Blaster compatible sound card
    Mouse or other pointing device
    Headphones or speakers

  • Hello - I used a Sony DVD to burn 350 songs. When I put the DVD into another computer to rip those 350 songs, the 'import songs' button never appeared in the lower right hand corner of iTunes. What's preventing songs from being ripped?

    Hello - I used a Sony DVD to burn 350 songs from my iTunes library to share with a friend. When I put the DVD into my friend's computer to rip those 350 songs, the 'import songs' button never appeared in the lower right hand corner of iTunes. Anybody know what's preventing me from ripping what's on the DVD? 

    When I put the DVD into my friend's computer to rip those 350 songs, the 'import songs' button never appeared in the lower right hand corner of iTunes.
    The import command only works with audio CDs. So if you burned the files in mp3 format, try instead using the "File > Add file to library" or "File > Add folder to library" commands.

  • I received a iTune gift card but when I put the code in it says no good. It is wort $15.00

    I was given a $15.00 gift card but when I put the code in it shows no good. code is XRF20F2CX3NR2LH2

    See this -> http://support.apple.com/kb/TS1292

  • I have not accessed my iBooks for a month. When I opened the application a while ago I found that all my books except for 2books have disappeared. What happened and how can I retrieve my books?

    I have not accessed my iBook library for a month. When I opened the application awhile ago I found that all my books except for 2 books have disappeared. What happened and how can I retrieve my books.
    Charles

    One possible reason is have you synced to your computer's iTunes recently ? If so then it might have replaced the books that were on your iPad with those that are on your computer's iTunes library.
    You should be able to re-download them via the Purchased tab in the ibookstore in the iBooks app, or via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes and then sync them back to the iPad : re-downloading. If you re-download them directly on your iPad then you may want to copy them to your computer's iTunes via File > Transfer Purchases, so that you have a backup copy of them and to see if it stops them disappearing from the iPad again when you sync (assuming that was the reason why they disappeard).

Maybe you are looking for