YV seems more and more disinclined to react to rem...

Over the last few days the YV box seems less and less likely to respond to the remote. I sometimes need to press a key 7 or 8 times before it will take any notice. Sometimes I try several very long presses and this sometimes seems to work. It's not the batteries and it's not the remote. It's not another remote stuck on or the TV flooding the room with IR. All other devices work fine. I can use the same buttons in TV mode and the TV reacts instantly to each and every single press, even if I 'bounce' off a wall or the ceiling.
It started a few days ago when it seemed to miss a few presses but now it seems to happen about 60% of the time. It almost seems that the 'detection' has gone to sleep and needs many many seconds get its ar** back in gear. I have had (only once or twice) seen it then execute several of the buttons that I pressed in sequence (ie queued up) but normally it just takes 10 or 15 seconds to respond to the last key pressed.
Not in standby, not in max eco mode, not in don't listen to the remote for 15 seconds mode. etc etc.
Any ideas?
Ta, Andy.

You may want to check  in/on contribute to this youview forum thread were someone is reporting similar issues
http://community.youview.com/youview/topics/box_suddenly_stopped_responded_to_remote

Similar Messages

  • I have a first gen iPad, 64g, and for no apparent reason, the screen goes black and whatever app I am using is closed on me. It seems to be happening more and more frequently, especially when loading a blog, or trying to watch a YouTube video. I try to o

    I have a  iPad, 32g, and for no apparent reason, the screen goes black and whatever app I am using is closed on me. It seems to be happening more and more frequently, especially when loading apps, or trying to watch a YouTube video. I try to open safari or youtube again and it will often crash several times before it may or may not decide to load for me. It is extremely annoying and getting to the point where I can not use it

    Standard troubleshooting steps in order are as follows:
    Power the iPad off and on.
    An iPad reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
    Restore your iPad with iTunes from your iPad's backup.
    Restore your iPad with iTunes as a new iPad or not from your iPad's backup.
    If no change after the last step, your iPad has a hardware problem.

  • Mail slowly eats more and more Real Memory until it's super sluggish

    My Mail had been giving me lots of problems.
    Basically it is fine when I open it and starts to become more and more slow and unresponsive the longer I have it open. I ultimately have to quit, and it always has to be a force quite because it just gets jammed.
    I started looking at Activity Monitor and have noticed that when I first run it, it uses about 150 megs of Real Memory. (I have 4gigs). Over the course of 2 hours, the Real Memory used creeps upwards and upwards, until it's over a GIG. The performance just gets worse and worse. The MB Pro's fans start whizzing away.
    Anyone know why this might be happening and what I can do to stop it?
    Thanks so much
    Scott

    Found a post in another Forum which (so far) seems to have fixed my problem:
    "I spent some time on the phone with Apple tech support today. They were very helpful and appeared to have solved the problem. They had me go to iSync in the applications directory, go the Preferences and then click on Reset Sync History. First they had me log out of MobileMe, but not sure that was important. I logged back in to MobileMe. I have now been using my Mac for an hour now with no recurrance of the safarisyncclient".
    Here's hoping.

  • EMU 0202 USB ASIO more and more crackle until complete drop out after approx. 5 mins

    Hi!
    The subject already pretty much wraps up my issue. I have an EMU USB 0202 which I am using in ASIO mode. Indepedently of the software that is used to playback something (e.g. Fruity Loops, Ableton Live, or Virtual DJ), I get crackles in the sound after approx 5 minutes (give or take a minute). If I leave things running like this, the sound quality degrades more and more for approx another minute, up to complete silence.
    Interesting fact: This can be fixed, by simply having the software "close/release" the device. E.g. by switching to Direct Sound and back to ASIO. Pretty much everyting, that causes the software to reinitialize the ASIO driver, will fix this - for the next 5 minutes.
    I have probably already tried whatever piece of advice I could find. I have checked my system settings, incl. the stuff that one of the moderators listed here in the board (http://forums.creative.com/t5/Profes...USB-and-0202-U...).
    I have used the DPL Latency checker tool. I don't see any sparks here. The only thing I noticed is, that as sound degrades, the latency slowly rises. But we are talking of "peaks" of 500µs when the sound starts to degrade.
    I also used this PCI Latency Checker tool, but everything is set to either 0 or 64 - from what I've read, PCI latency could only be a problem if I were to see values like e.g. 128 or even max of 255.
    I don't see any load peaks on the system either - neither disk activity or anything. Though the DAWs and the VSTs can cause some pretty heavy system load, the system is pretty much idle when playing songs back with VirtualDJ. And still as said before, after a few minutes things go from good, to bad, to worse, to silence. Searching though the net, it seems like everybody else is having some kind of general USB audio problem, where they have instant/permant crackling. I have not yet found anybody else with such a gradual decrease. The only person so far which also reports a similar issue is this:
    http://forums.creative.com/t5/Profes...;jsessionid=6A...
    But seems like he also did only get the standard "try this" - text block answer. As I said, I already tried all these.
    So, what else can I do? This is really frustrating....
    Any suggestions?
    EDIT: It's too obvious (too me at least) that I forgot to mention: This happens independently of the buffer settings. I can go with 6ms or 50ms... problem is still the same. Also the "timing" of the problem is not affected by this.

    Places you need to look are are your IDE bus and PCI bus.
    Verify that the chipset drivers are up to date.
    Also verify that your USB host is not sharing with any devices like WIFI or SATA controllers.
    Have you sent a support ticket to E-MU support? You may want to for an issue like this.
    http://www.emu.com/support/askus/ema...asp?CRSStatus=

  • My iPod Touch keeps displaying the message 'This accessory not supported by iPod touch.' When I've used it w/this device multiple times, it's happening more and more frequently now. Anyway to dismiss this message for good? Because the iPod still plays .

    My iPod Touch keeps displaying the message 'This accessory not supported by iPod touch.' When I've used it w/this device multiple times, it's happening more and more frequently now. Anyway to dismiss this message for good? Because the iPod still plays thru my radio and system.

    That message is usually due to a bad cable.
    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    If you can’t charge your iPhone, iPad, or iPod touch
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod               
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar
    or send it in to Apple. See:     
    Service Answer Center - iPod

  • Is it just me?? Facebook pushes me to App Store. More and more advert exposure

    Ok, so I'm browsing Facebook and then all of a sudden I'm in the App Store looking at some game or William hill betting apps.
    It seems to me more and more adverts are being pushed to me, not only on iOS, but on osx too.
    I haven't long been an apple consumer (3yrs of so) and I was just starting to like the fact it different, and now it seems if I want to use my iPhone, I'm going to have to put up with being stopped from what ever I'm doing, and having apps and other suggestions pushed in my face.
    Dear Apple.. not a great move, really!
    Disappointed

    Ok, Apple has fixed it now

  • TS3376 how do i unlock my phone after i find it if the code does'nt work it keep putting me off more and more minutes at a time?

    how do i unlock my phone after I find it I keep getting this phone is dialed for more and more minutes?

    Back it up and restore it in iTunes on the last computer it was synced with, as explained at the bottom of this article: http://support.apple.com/kb/HT1212.  This will remove the passcode.

  • After I tried to install Mavericks on my Macbook Air, June 2012 the the drive began to fail, with the appearance at more and more frequent intervals of the spinning beach ball, I had to restart even  after I wiped the drive and reinstalled Mountain Lion

    After I installed Mavericks I could no longer shut my Macbook Air (mid July 2012) down, except by force quit,I was using an Apple Tv screen and Apple wireless keyboard. After that the spinning beachball kept appearing at more and more frequent intervals, even after I had wiped the drive and re-installed Mountain Lion from the Apple site. It is now almost non functional. and just three months out of warranty

    Backup your data as soon as you can.
    MacBook Air computers sold between June 2012 through June 2013 are known to have a high SSD failure rate and Apple is replacing them for free.
    http://www.apple.com/support/macbookair-flashdrive/
    You should maintain current backups.  Given the known failure rate of your SSD that is especially important.
    For more about backups
    Time Machine Basics: http://support.apple.com/kb/ht1427
    Most commonly used backup methods: 
    https://discussions.apple.com/docs/DOC-3045
    Methodology to protect your data.  Backups vs. Archives.  Long-term data protection:
    https://discussions.apple.com/docs/DOC-6031

  • The system doesn't recognize or capitalize the word (I) or the first word of every sentence. Another really annoying thing about the integrated mail on your Mac computers is the fact that the system learns the word as you type it more and more instead of

    The system doesn’t recognize or capitalize the word (I) or the first word of every sentence. Another really annoying thing about the integrated mail on your Mac computers is the fact that the system learns the word as you type it more and more instead of highlighting it as incorrectly is this is a word that’s being misspelled. Can Apple fix this bug to make it user friendly as if you were using Office or a Word Document?

    You hit the target CT.
    It’s only fair that if Apple is going to integrate Mail into Mac PCs, it would be nice if the system does it for you like Office or perhaps Outlook. I just don’t to use Outlook although I have it installed and ready to use, but instead use Mail which comes with Mac OS already.
    I hope to make some sense here.

  • OS 10.4.11 - MacBook Pro Crashing more and more every day - why?

    Crashes more and more often - several times in a day.
    Hope someone can help. This has happened to some of my friends who just put up their hands and bought one of the newer macs. I've only had this one for a year, and I don't/can't put up the funds all over again. I really really need this to work for school and for my job. Please help!
    I have a MacBook Pro OS 10.9.11.
    2.33 GHz Intel Core 2 Duo
    2 GB 667 MHz DDR2 SDRAM
    I tried booting from the apple cd and doing verify/repair - but that hasn't fixed the crashes. I am not a tech type person and I live VERY far from a apple store. My panic log and other recent logs are pasted below.
    Recent Panic Log:
    Sun Nov 9 13:26:50 2008
    panic(cpu 0 caller 0x001A49CB): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
    CR0: 0x8001003b, CR2: 0x0002003c, CR3: 0x00ecf000, CR4: 0x000006e0
    EAX: 0x00020020, EBX: 0x05909880, ECX: 0x00000000, EDX: 0x03df3640
    CR2: 0x0002003c, EBP: 0x251fbb48, ESI: 0x314d0000, EDI: 0x00000513
    EFL: 0x00010202, EIP: 0x003a42b6, CS: 0x00000008, DS: 0x00000010
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x251fb938 : 0x128d0d (0x3cc65c 0x251fb95c 0x131f95 0x0)
    0x251fb978 : 0x1a49cb (0x3d2a94 0x0 0xe 0x3d22b8)
    0x251fba88 : 0x19b3a4 (0x251fbaa0 0x1403b54 0x251fbab8 0x19a840)
    0x251fbb48 : 0x39ed48 (0x5909880 0x8000 0x251fbb78 0x3bf483)
    0x251fbb98 : 0x3bf414 (0x5909880 0x0 0x1 0x0)
    0x251fbbb8 : 0x3bf4e3 (0x5909880 0x0 0x251fbbe8 0x3b17000)
    0x251fbbd8 : 0x650cd0 (0x5909880 0x0 0x251fbc08 0x6518e9)
    0x251fbc08 : 0x651b06 (0x5963000 0x18 0x0 0x1)
    0x251fbc48 : 0x66d77b (0x5963000 0x3b17000 0x1 0x3a5b540)
    0x251fbc68 : 0x650dd3 (0x5963000 0x3b17000 0x5963004 0x12db2d)
    0x251fbc88 : 0x3b5499 (0x5963000 0x4b069c 0x251fbcd8 0x0)
    0x251fbca8 : 0x187b8a (0x5963000 0x596c6c0 0x1d 0x251fbcd8)
    0x251fbcf8 : 0x12b502 (0x4337fa8 0x578156c 0x2 0x11cc32)
    0x251fbd38 : 0x11f1f0 (0x4337f00 0x251fbdcc 0x24 0x0)
    0x251fbd78 : 0x12b6e5 (0x4337f00 0x10000 0x0 0x251fbd88)
    0x251fbda8 : 0x1494a1 (0x251fbdcc 0x24 0x0 0x0) Backtrace continues...
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.ATIRadeonX1000(4.5.6)@0x64a000
    dependency: com.apple.iokit.IOPCIFamily(2.2)@0x610000
    dependency: com.apple.iokit.IOGraphicsFamily(1.4.8)@0x620000
    dependency: com.apple.iokit.IONDRVSupport(1.4.8)@0x63b000
    Kernel version:
    Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386
    Mon Nov 10 16:52:19 2008
    panic(cpu 1 caller 0x001A49CB): Unresolved kernel trap (CPU 1, Type 14=page fault), registers:
    CR0: 0x80010033, CR2: 0x33331e00, CR3: 0x00ecf000, CR4: 0x000006e0
    EAX: 0x33331e00, EBX: 0x016c4c60, ECX: 0x042d6ef0, EDX: 0x016c4c68
    CR2: 0x33331e00, EBP: 0x2512bb08, ESI: 0x00000014, EDI: 0x04b94940
    EFL: 0x00210206, EIP: 0x00141502, CS: 0x00000008, DS: 0x00000010
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x2512b8b8 : 0x128d0d (0x3cc65c 0x2512b8dc 0x131f95 0x0)
    0x2512b8f8 : 0x1a49cb (0x3d2a94 0x1 0xe 0x3d22b8)
    0x2512ba08 : 0x19b3a4 (0x2512ba20 0x3aff7000 0x5 0x0)
    0x2512bb08 : 0x12db2d (0x16c4c60 0x1 0x0 0x3)
    0x2512bb38 : 0x12db4c (0x14 0x1 0x2512bb98 0x2512bbb0)
    0x2512bb58 : 0x3bf5d1 (0x14 0x2512bb8c 0x131e99 0x131ffe)
    0x2512bb78 : 0x3c63d3 (0x14 0x3851460 0x3851464 0x2512bbac)
    0x2512bb98 : 0x3c4c1a (0x2512bbb0 0x3ebb54 0x35 0x3c6d3d)
    0x2512bbd8 : 0x3c3710 (0x4b94940 0x3e93940 0x1 0x3e48cb)
    0x2512bc38 : 0x3c2c90 (0x3e93940 0x4b94940 0x3f10bc 0x3c4dd8)
    0x2512bc78 : 0x3c01b0 (0x4ace8c0 0x4b94940 0x3f10a4 0x3c4d73)
    0x2512bca8 : 0x3c2c90 (0x4b9a200 0x4b94940 0x3f10bc 0x162a88)
    0x2512bce8 : 0x387b66 (0x3cb9180 0x4b94940 0x2512bd28 0x3c2528)
    0x2512bd08 : 0x38b367 (0x38b6a00 0x4b94940 0x23b2e470 0x38b6a00)
    0x2512bd28 : 0x3b2954 (0x38b6a00 0x4b94940 0x2512bd58 0x3bf4ff)
    0x2512bd78 : 0x18873c (0x38b6a00 0x4a04fb4 0x4a04fc8 0x11cc32) Backtrace continues...
    Kernel version:
    Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386
    Wed Nov 12 00:07:32 2008
    panic(cpu 0 caller 0x003BE004): OSObject::_RESERVEDOSObject9 called
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x2532b498 : 0x128d0d (0x3cc65c 0x2532b4bc 0x131f95 0x0)
    0x2532b4d8 : 0x3be004 (0x3f2a84 0x3f2c08 0x3f2c08 0x9)
    0x2532b4f8 : 0x3bf27c (0x4b090c 0x9 0x2532b528 0x19a706)
    0x2532b518 : 0x3c0ebf (0x3d679e0 0x4b0970 0x2532b558 0x19a809)
    0x2532b538 : 0x3c0f13 (0x3b7b9e0 0x3d679e0 0x2532b558 0x0)
    0x2532b558 : 0x3a6fb7 (0x3d679e0 0x4820048 0x25320010 0x2f28e000)
    0x2532b5b8 : 0x3a6e37 (0x4825e00 0x4825e00 0x3831da0 0x0)
    0x2532b5e8 : 0x66e80c (0x4825e00 0x3831da0 0x0 0x1)
    0x2532b6b8 : 0x66f838 (0x40ee800 0x480c380 0x2f750000 0x533ac000)
    0x2532b718 : 0x671e6e (0x40ee800 0x480c380 0x45cf00 0xd0)
    0x2532bc68 : 0x65254c (0x40ee800 0x2532bcd0 0x5afa9a4 0x5afa9a8)
    0x2532bcf8 : 0x3b19b9 (0x40ee800 0x1 0x2532bd2c 0x2532bd28)
    0x2532bd38 : 0x3b4e75 (0x40ee800 0x1 0x382ecb0 0x1)
    0x2532bd68 : 0x189fdc (0x40ee800 0x1 0x382ecb0 0x5afa9c0)
    0x2532bdb8 : 0x12b4ee (0x5afa98c 0x5afa7a0 0x2532bdf8 0x11e042)
    0x2532bdf8 : 0x124b17 (0x5afa900 0x37fb4f8 0x3fe6238 0x0) Backtrace continues...
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.ATIRadeonX1000(4.5.6)@0x64a000
    dependency: com.apple.iokit.IOPCIFamily(2.2)@0x610000
    dependency: com.apple.iokit.IOGraphicsFamily(1.4.8)@0x620000
    dependency: com.apple.iokit.IONDRVSupport(1.4.8)@0x63b000
    Kernel version:
    Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386
    Mon Nov 17 00:12:18 2008
    panic(cpu 1 caller 0x001A49CB): Unresolved kernel trap (CPU 1, Type 14=page fault), registers:
    CR0: 0x8001003b, CR2: 0xeeeeeef2, CR3: 0x00ecf000, CR4: 0x000006e0
    EAX: 0x00010001, EBX: 0xffffffff, ECX: 0x04297b8c, EDX: 0xeeeeeeee
    CR2: 0xeeeeeef2, EBP: 0x2520bec8, ESI: 0x7fffffff, EDI: 0x03b70288
    EFL: 0x00210887, EIP: 0x0013d832, CS: 0x00000008, DS: 0x044f0010
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x2520bc98 : 0x128d0d (0x3cc65c 0x2520bcbc 0x131f95 0x0)
    0x2520bcd8 : 0x1a49cb (0x3d2a94 0x1 0xe 0x3d22b8)
    0x2520bde8 : 0x19b3a4 (0x2520be00 0x5a 0x2520bf08 0x1f15d027)
    0x2520bec8 : 0x130542 (0x3b70288 0xffffffff 0x7fffffff 0x2520beec)
    0x2520bf08 : 0x195f2e (0x2520bf44 0x0 0x0 0x0)
    0x2520bfc8 : 0x19b81e (0x42ec960 0x0 0x19e0b5 0x384d718) No mapping exists for frame pointer
    Backtrace terminated-invalid frame pointer 0xbfffea38
    Kernel version:
    Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386
    Fri Nov 21 02:59:20 2008
    panic(cpu 0 caller 0x0019A516): simple lock deadlock detection - l=00466260, cpu=0, ret=00000000
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x2522bb58 : 0x128d0d (0x3cc65c 0x2522bb7c 0x131f95 0x0)
    0x2522bb98 : 0x19a516 (0x3d1478 0x466260 0x0 0x0)
    0x2522bbb8 : 0x13d46a (0x466260 0x283 0x2522bc08 0x140a17)
    0x2522bbd8 : 0x72ae7a (0x3e7eea0 0x38c0b40 0x2522bc08 0x168ec68)
    0x2522bc18 : 0x72a610 (0x3e6bc00 0x2522bc5c 0x2522bc48 0x3c0d78)
    0x2522bc38 : 0x73c3c3 (0x3e6bc00 0x2522bc5c 0x2522bc68 0x3bf37a)
    0x2522bc78 : 0x38aff4 (0x3e6bc00 0x0 0x47a3f00 0x3bf4e3)
    0x2522bca8 : 0x38bbb0 (0x47a3f00 0x3e66d40 0x0 0x37fec80)
    0x2522bce8 : 0x38f5a3 (0x47a3f00 0x381de60 0x0 0xffffffff)
    0x2522bd28 : 0x38f755 (0x47a3f00 0x4 0x47a3f04 0x199793)
    0x2522bd48 : 0x5b9696 (0x47a3f00 0x0 0x2522bd78 0x1a3736)
    0x2522bd68 : 0x3b2efa (0x47a3f00 0x4b069c 0x2522bdb8 0x1985e1)
    0x2522bd88 : 0x188817 (0x47a3f00 0x418c6cc 0x2522bda8 0x19e23a)
    0x2522bdb8 : 0x12b4ee (0x4c27cb4 0x4c3cfa8 0x0 0x0)
    0x2522bdf8 : 0x124b17 (0x4c27c00 0x0 0x18 0x2522bedc)
    0x2522bf08 : 0x195f2e (0x2522bf44 0x0 0x0 0x0) Backtrace continues...
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.driver.ACPISMCPlatformPlugin(2.7.3d4)@0x73a000
    dependency: com.apple.iokit.IOPCIFamily(2.2)@0x610000
    dependency: com.apple.driver.IOPlatformPluginFamily(2.7.3d4)@0x724000
    dependency: com.apple.iokit.IOACPIFamily(1.2.0)@0x6b2000
    dependency: com.apple.driver.AppleSMC(1.3.0d1)@0x732000
    com.apple.driver.IOPlatformPluginFamily(2.7.3d4)@0x724000
    com.apple.iokit.IOUSBFamily(2.7.7)@0x5a5000
    Kernel version:
    Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386
    Fri Nov 21 18:54:52 2008
    panic(cpu 1 caller 0x001A49CB): Unresolved kernel trap (CPU 1, Type 14=page fault), registers:
    CR0: 0x8001003b, CR2: 0x00008400, CR3: 0x00e99000, CR4: 0x000006e0
    EAX: 0x00008400, EBX: 0x0000001c, ECX: 0x00000000, EDX: 0x0168ec68
    CR2: 0x00008400, EBP: 0x2523bbc8, ESI: 0x00000018, EDI: 0x00000000
    EFL: 0x00010206, EIP: 0x0033ebbf, CS: 0x00000008, DS: 0x00ab0010
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x2523b9b8 : 0x128d0d (0x3cc65c 0x2523b9dc 0x131f95 0x0)
    0x2523b9f8 : 0x1a49cb (0x3d2a94 0x1 0xe 0x3d22b8)
    0x2523bb08 : 0x19b3a4 (0x2523bb20 0x35275038 0x2523bb48 0x127487)
    0x2523bbc8 : 0x314208 (0x18 0x50 0x0 0x3d53de4)
    0x2523bc18 : 0x2fe8a8 (0xeb2000 0x0 0xeb2fff 0x0)
    0x2523bd28 : 0x1e5ab1 (0x2523bd54 0x297 0x2523bd88 0x1d172b)
    0x2523bd88 : 0x1e07dc (0x4baa39c 0x2523be9c 0x11 0x2523bde8)
    0x2523be08 : 0x35071b (0x4114120 0x2523be9c 0x3ed6a04 0x1)
    0x2523bef8 : 0x350893 (0x40dd1f4 0x4114120 0x15 0x1bc77840)
    0x2523bf58 : 0x37b300 (0x40dd1f4 0x4112878 0x41128bc 0x0)
    0x2523bfc8 : 0x19b77e (0x42ed180 0x0 0x19e0b5 0x4510530) No mapping exists for frame pointer
    Backtrace terminated-invalid frame pointer 0xb021ce18
    Kernel version:
    Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386
    Fri Nov 21 20:35:27 2008
    panic(cpu 1 caller 0x001A49CB): Unresolved kernel trap (CPU 1, Type 14=page fault), registers:
    CR0: 0x80010033, CR2: 0x0041fa4c, CR3: 0x00e99000, CR4: 0x000006e0
    EAX: 0x0041fa40, EBX: 0x04658224, ECX: 0x0397cc80, EDX: 0x03aa3274
    CR2: 0x0041fa4c, EBP: 0x25253c88, ESI: 0x0465821c, EDI: 0x03aa3270
    EFL: 0x00010002, EIP: 0x0013f301, CS: 0x00000008, DS: 0x037c0010
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x25253a58 : 0x128d0d (0x3cc65c 0x25253a7c 0x131f95 0x0)
    0x25253a98 : 0x1a49cb (0x3d2a94 0x1 0xe 0x3d22b8)
    0x25253ba8 : 0x19b3a4 (0x25253bc0 0x1103 0x168ecb8 0x0)
    0x25253c88 : 0x13f3d7 (0x465821c 0x3aa3270 0x41fa40 0x19e23a)
    0x25253ca8 : 0x11f6e9 (0x465821c 0x3aa3270 0x25253ce8 0x121b41)
    0x25253d18 : 0x12195c (0x465821c 0x3aa3270 0x25253d38 0x37c49a0)
    0x25253d38 : 0x12720d (0x3aa3258 0x46581e0 0x1 0x25253d6c)
    0x25253d78 : 0x14b516 (0x37c49a0 0x2803 0x2003 0x11cc32)
    0x25253db8 : 0x12b4ee (0x49dd3a4 0x443f2a8 0x0 0x0)
    0x25253df8 : 0x124b17 (0x49dd300 0x0 0x28 0x25253edc)
    0x25253f08 : 0x195f2e (0x25253f44 0x0 0x0 0x0)
    0x25253fc8 : 0x19b81e (0x43ab2e0 0x0 0x19e0b5 0x38140d8) No mapping exists for frame pointer
    Backtrace terminated-invalid frame pointer 0xbffff738
    Kernel version:
    Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386
    Sat Nov 22 22:11:45 2008
    panic(cpu 0 caller 0x003BDB14): OSMetaClass::_RESERVEDOSMetaClass0 called
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x2506baf8 : 0x128d0d (0x3cc65c 0x2506bb1c 0x131f95 0x0)
    0x2506bb38 : 0x3bdb14 (0x3f28c4 0x0 0x2506bb68 0x3a0e140)
    0x2506bb58 : 0x3b540f (0x3e1b180 0x4b0958 0x4ae90c4 0x12db2d)
    0x2506bb78 : 0x3b5467 (0x4ae90c0 0x1e 0x2506bbc8 0x4473980)
    0x2506bb98 : 0x187b8a (0x4ae90c0 0x47339c0 0x1e 0x2506bbc8)
    0x2506bbe8 : 0x12b502 (0x474baa8 0x4e6556c 0x6 0x11cc32)
    0x2506bc28 : 0x11f1f0 (0x474ba00 0x2506bcbc 0x24 0x0)
    0x2506bc68 : 0x12b6e5 (0x474ba00 0x10000 0x0 0x0)
    0x2506bc98 : 0x1494a1 (0x2506bcbc 0x24 0x0 0x10c)
    0x2506bce8 : 0x120221 (0x47339c0 0x1 0x23b0a000 0x0)
    0x2506bd08 : 0x12291e (0x47339c0 0x1 0x23b0a5b0 0x23b0a5b0)
    0x2506bd48 : 0x126501 (0x37c54a0 0x5b07 0x23b0a5b0 0x12ce10)
    0x2506bd78 : 0x149ea6 (0x37c54a0 0x5b07 0x7 0x11cc32)
    0x2506bdb8 : 0x12b4ee (0x38da2a8 0x47463a8 0x0 0x0)
    0x2506bdf8 : 0x124b17 (0x38da200 0x0 0x24 0x2506bedc)
    0x2506bf08 : 0x195f2e (0x2506bf44 0x0 0x0 0x0) Backtrace continues...
    Kernel version:
    Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386
    (I think the crash log below is just from my IPhone - but I am including this)
    Recent crash log in mobile folder in crash folder:
    Incident Identifier: CE90C089-EDC2-4D5D-AF95-340D094C3463
    CrashReporter Key: 385c0d9384a508ee9988570e5f38ee35a04fd3d0
    OS Version: iPhone OS 2.1 (5F136)
    Date: 2008-11-19 17:49:46 -0500
    2056192 bytes free
    30715904 bytes wired
    0 bytes purgeable
    Memory status: 8
    About to jettison: MobileSafari
    Processes
    PID RPRVT RSHRD RSIZE Command
    1 252K 240K 364K launchd
    13 72.0K 144K 92.0K update
    14 224K 184K 288K syslogd
    15 620K 292K 920K lockdownd
    16 1.51M 348K 1.95M mediaserverd
    17 304K 156K 428K mDNSResponder
    19 652K 252K 1.31M iapd
    20 232K 252K 408K fairplayd
    21 596K 268K 984K configd
    22 6.53M 16.3M 9.54M SpringBoard
    25 984K 336K 1.39M CommCenter
    26 1000K 424K 1.36M BTServer
    28 240K 168K 288K notifyd
    36 7.09M 10.4M 8.71M MobilePhone
    1473 232K 156K 344K SCHelper
    1628 19.8M 14.7M 30.8M MobileSafari
    1632 296K 216K 1.12M ReportCrash
    *End*

    Backup your files. Erase the drive and reinstall the OS. If that doesn't fix it, then it's probably a hardware issue.

  • Can anyone tell me where to send my i phone to for repair?? I have paid by card on this site but been given no details as to what address it is to be sent . i am not a computer whizz but not an idiot either and i am becoming more and more frustrated !!!!!

    Can anyone tell me where to send my i phone to for repair?? I have paid by card on this site but been given no details as to what address it is to be sent . I am not a computer whizz but not an idiot either and i am becoming more and more frustrated !!!!!

    Yes, AppleCare can tell you.  Below is the number for AppleCare in the US. 
    1-800-APL-CARE *
    1-800-275-2273
    Hours of Operation: 7 days a week from 5am - 8pm Pacific time.
    If you live outside the US, additional contact information can be found at this link.
    http://support.apple.com/kb/he57

  • Optical drive on iMac at work, barely one year old, won't read CD's....disc utilities shows disc unavailable!  Rarely used and out of warranty, what a rip off!!  I have been on MACS since the 80's and things are getting more and more difficult

    Optical drive on iMac at work, barely one year old, won't read CD's....disc utilities shows disc unavailable!  Rarely used and out of warranty, what a rip off!!  I have been on MACS since the 80's and things are getting more and more difficult to deal with. Why did it quit after barely being used? Any help from Apple?

    It depends on what you mean by "barely one year old". If the iMac is only a couple of days out of warranty, Apple's been known to make exceptions and extend the warranty, though it's by no means guaranteed. If it's several days or more out of warranty, then Apple will fix it, if it's a hardware problem, but the repair won't be free. This is no different now then it would have been with a Mac purchased back in the 80s.
    Why the drive failed, if indeed it has, is impossible to say. Could have been a static shock, a weak component that failed when power was applied, or a mechanical fault in one of the tiny parts used in optical drives and hard drives that finally broke.
    Regards.

  • Why are companies getting more and more difficult to contact via phone?

    I recently had a problem with Fandango, then Roxio, and now Adobe and tried to call someone in the USA with no luck.  I am tired of getting some guy in India (or anyone anywhere else) helping me with products I purchased from a US company with US dollars, to be used in the US!  This crap to save money has GOT to end!  Now, when I ask to be transferred to someone in the Us, they say they cannot do so.  I hang up!  Sirius radio is even worse regarding this by the way!   I also tried emailing these idiots with no response.  Does ANYONE know how to contact a US customer service rep?  This country is going down the toilet, just like George Carlin said it would!
    Thanks!

    This is something that has been bothering me more and more as time moves forward.  
    The two biggest companies that I call for support, VMware and SonicWALL, have transitioned to this model.  While it has been going on for a while, the time "wasted" waiting for call backs, not being able to move away from my desk for hours on end, and not being able to get a definitive time for the call backs is hampering my ability to do my job.  I can't even start another support call with another vendor in fear of missing a call back.
    Anyone else notice this trend with other vendors?
    This topic first appeared in the Spiceworks Community

  • HT2729 I bought something in a game for 5$ and didn't get anything but I was charged. This is happening more and more and I don't know what to do. Can anyone help me?

    I bought something in a game for 5$ and didn't get anything but I was charged. This is happening more and more and I don't know what to do. Can anyone help me?

    have you contacted the developers of the games to let them know?

  • [SOLVED] Losing more and more space everyday

    Hello,
    During around 2 weeks I have a really strange problem: I'm loosing more and more free space everyday, and I can't figure what cause that.
    The system is installed on a 12GB ext4 partition. My home is on it but as I move data to another partition something else tooks the free space; I used to have 4GB of data inside home, including all hidden folders, now it's only 1.5GB and the next big folder is the "windows" folder of wine.
    What should I use to monitor if a file is increasing or all write operations of my applications?
    Thanks.
    Edit: my cache folder is empty and I removed the .thumbnails folder.
    Last edited by Dreamkey (2012-06-29 11:04:49)

    Yes I had a problem with my logs : everything.log, kernel.log and messages.log got spammed by this 4 lines every second
    Jun 29 03:52:01 anarky-laptop kernel: [18650.554384] atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
    Jun 29 03:52:01 anarky-laptop kernel: [18650.554396] atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
    Jun 29 03:52:01 anarky-laptop kernel: [18650.566358] atkbd serio0: Unknown key released (translated set 2, code 0x8d on isa0060/serio0).
    Jun 29 03:52:01 anarky-laptop kernel: [18650.566370] atkbd serio0: Use 'setkeycodes e00d <keycode>' to make it known.
    Which is now solved by doing some strange manipulations (this was not the first time I had to do it, but I had forgotten it).
    @DSpider: I changed my logrotate.conf like in your post, so without doing anything else I should recover free space in 2 weeks?

  • How to make a text becoming more and more visible?

    Maybe I didn't use google well, but I didn't find anything in the internet what could solve my question.
    I basically want to work with a white background, where a text is on which becomes more and more visible the more it comes closer to the bottom. The tricky thing is, it's for a website, so it has to be responsive for smartphones or tablets for example (first idea: put the white background layer to the front like it makes the text behind it more and more visible/invisible?). Any ideas how to solve that? Would be so great to know.

    I'm not sure what it means to "be responsive for smartphones or tablets"...  People put complex graphics on those things all the time.  They have unprecedented power.
    Photoshop can help you do what you're describing.  What you want is no more complex than putting a gradient mask on a layer so as to create partial transparency.  You could have fading text (as a graphic) or a fading solid color fill that would overlay text rendered by a browser.
    Just some graphic ideas...
    Save as a PNG-24 to get partial transparency that a browser can render.
    -Noel

Maybe you are looking for