Z ALV with Default Setting in save layout option disabled

Hi friends! I need a little help. I have a Z ALV and we trying to save layout, but the option "Default Setting" is grey and I cannot use this. How can I enable this option in save layout?
Thanks!!

hi,
there is a field in the FM REUSE_ALV_GRID_DISPLAY HAVE export parameters "I_SAVE" PASS 'X' to it. I think it will work.
regards,
Edited by: ZAHID HAMEED on Oct 26, 2011 10:41 PM

Similar Messages

ALV display: Default setting field in grey mode

Hi
In SE16 or SE11 when we are checking the table (any table, say MARA, RESB etc) with ALV option, we are getting the "save layout" with default setting field in grey mode. So whatever layout is created it is not a default layout, the user has to select the layout. However when I check with another friend in another project there the ALV setting is coming with editable option.
So how shall I get that the field in change mode. Pls suggest.
Regds

Hi BNR,
for reasons that may be discussed elsewhere, the layout saved in SE16 is applied to all tables displayed using SE16. Thus a default layout does not make too much sense. In the layout the columns displayed are stored. If you have a default layout you will see only the columns that have all displayed columns in common.
By the way, in my system I can store a default layout but only user-specific. I can not save standard (non-user-specific) layouts in SE16/SE11.
In SE16N I can store both general (non-user-specific) and Default layouts. Here the layout is table-specific.
If you users want a special layout (and they are allowed to use SE16!!!) , you should switch to SE16N.
Regards,
Clemens

IN ALV Report 'SAVE LAYOUT' option missing

Dear All,
I have created one report in ALV GRID using ABAP OBJECTS(Using class CL_GUI_CUSTOM_CONTAINER and
CL_GUI_ALV_GRID).But in output when i click on change layout option i am not getting SAVE layout option.
I have already passed I_SAVE parameter = 'A' while calling metod SET_TABLE_FOR_FIRST_DISPLAY. But i didnt worked.
Please do needful.
Regards,
Mayank

Hi,
You can manage display variants by using parameters, is_variant and i_save of set_table_for_first_display. Here are options for variant handling. <structure_name> is the variant-defining structure of type DISVARIANT. The field report in this structure should contain the value of sy-repid.
Hope this helps. Reward points if helpful.
Thanks,
Balaji

HOW TO ACTIVATE SAVE LAYOUT OPTION IN VA05 T CODE

Dear Genios,
i am facing probel to activate the save layout option in any sap standard reports.
I want to create & save a layout in standard report va05.
please help me for the same.
Regards
Rabin Nayak

Go to SU01/SU3 ( to ur ID) select parameters tab and then scrol down and press F4 select SD_VARIANT_MAINTAIN and in the next field select A or X then try it will allow u to save ur own variant.(the save icon come to screen variant selection screen)
More on this:
By default, SAP user can't save report layout in some SAP SD t-code such as: VA05 and SDO1. The 'save' menu will be grey. But, you actually can save the layout by adding a parameter in your SAP user profile. You do that with t-code: SU3. Go to 'parameters' tab and add new parameter id, which is: SD_VARIANT_MAINTAIN'. The parameter value for that is 'A'. Then save your user profile and try again to save layout in VA05 or SDO1 t-code.
Regards,
Sanjeev

Standard Report not Displaying 'SAVE LAYOUT' Option

Dear All,
Using Tcode VF44, i am getting output list.But in that list when i click on select layout option from toolbar its not displaying 'save layout' Option. can anybody give me soln for the same.How can i get that option?
Regards,
Mayank

hi ,
it depends on the user parameters.
U have to identify the parameter id and u have to activate it in user maintainance partameters .
su01 -> parameters.
ex . parameter id -> SD_VARIANT_MAINTAIN -> X
so u can save layout now.
regards,
manikandan

Standard Report's Layout not displaying 'SAVE LAYOUT' Option

Dear All,
Using Tcode VF44, i am getting output list.But in that list when i click on select layout option from toolbar its not displaying 'save layout' Option. can anybody give me soln for the same.How can i get that option?
Regards,
Mayank

HI,
No yaar, This one is standard report and i am getting 'SAVE LAYOUT' option in 300 but not in Production Server.There must be settings for this. If u hv any idea ?
Regards,
Mayank

Save layout option for Block Alv

Hi,
Small Question,
Is there any way to enable Save layout(Ctrl+F10) option for Block ALV?As i cannot see any option to do so with Reuse_*Block like i_save in Grid and For list ALVs...FM.And its by default it is Disable.
Any Hints?
Cheers,
Amit.

That's what i already investigated(Small).
wanted Just to confirm.Anyways thanks.
@Gautham:I already found that link([And this also |/message/702997#702997 [original link is broken];) but thought After 2 and
half yrs Vijay found any solution and would land with any solution as always
Anyways Thanks Vijay And Gautham.
Cheers,
Amit.

SAVE Layout Option in ALV list Report

Hi Experts,
Is it possible to SAVE the layout option for Block ALV list Reports?
Thanks in Advance,
Sivak.

Hi,
It is not possible to save layout in BLock ALV display but possible to change layout. There is no parameter to save. It is not possible to store the layout as it has several structure.
Thanks & Regards
Rocky

OWL with Default Set containting Current Date as query parameter

Hello Everybody,
I have a custom BO which mainly consists of a name and a time period (start and end date).
Now I'd like to create a Default set like
"Give me all objects with today between start and end date."
I already tried the following:
Filling a field using UI-Scripting:
$data.UIState.Today = $controller.DateTimeUtils.DateNow;
Copy the field into the search parameter
executing the query with this search parameter.
However, I using this approach, I only managed to search for objects matching exactly todays date, but not using greater/lower comparators.
Furthermore I also searched for a field transformation giving me the current date but did not succeed.
Does anyone have any ideas how to achieve this or how to get one of the above ideas to work?
Best regards,
Ludger

Hello Ludger,
That`s what I expected: The fields do not define the interval.
Therefore you need to define it by yourself via this "less or equal".
What you can do in the UI Designer at the query definition is to provide an interval
For the field "CurrentDate" provide
- SelectOption = "between"
- Low Value = your start date
- High Value = your end date
- Select Option = "include"
HTH,
Horst

Save layout option for FITRV_PRINT_TABLE_CONTROL_DATA

Hello,
I need to print table control data ,for this am using FITRV_PRINT_TABLE_CONTROL_DATA
My requirement is now to have the option to save the layout which is generated after calling this function module.
currently 'save layout' is not shown in the pf status and is disabled in the menu. only change layout is enabled which cannot be saved.
1. Can we enable the save layout inside this list generated by fm.if yes how.
2. can we have custom buttons inside the list generated using this fm.if yes how.
3. Copying fm and convert to Z can do it I guess but I want to check if there is any option with the existing standard fm .
4. Is it better to remove this fm and generate a new alv list for the table control. which option is better.
Thank you.
Best Regards,
Abhilash

Hi,
Use the below function module
FITRV_PRINT_TABLE_CONTROL_DATA
Regards
Sudheer

How can we create save layout option in grid tool bar

hi,
how can we create select layout option in grid tool bar to save my own layout. if any one knows tell me immediately
thanks

Hi again,
1. We need to do 1 additional thing.
data : GS_variant TYPE DISVARIANT.
GS_variant-REPORT = sy-repid.
2. while calling pass this parameter also.
IS_VARIANT = GS_variant
It will work now.
3. Moreover, I_SAVE has 3 options.
I_SAVE = SPACE
Layouts cannot be saved.
I_SAVE = 'U'
Only user-defined layouts can be saved.
I_SAVE = 'X'
Only global layouts can be saved.
I_SAVE = 'A'
Both user-defined and global layouts can be saved.
regards,
amit m.
Message was edited by: Amit Mittal

Read-only radiogroup with default doesn't save state in 2.0

Hi,
I upgraded to HTMLDB 2.0 and noticed a change in behavior. Namely, when I have a read-only radio group with a default value and a not-null validation, the validation claims fails although a radio button is selected from the disabled radio group.
Here's a small app I generated to demonstrate the issue:
http://htmldb.oracle.com/pls/otn/f?p=34464
Go there and try to create a new EMP.
The only things added after the generation are:
1. Not-null validations on several of the fields
2. Changed MGR to a "Select List"
3. Changed DEPTNO to a radio group with these properties:
a) default value type: static; default value: 20
b) read-only when: P2_EMPNO is Null
This used to work fine in 1.6 - namely, the default value got it to the session state and consequently the validation succeeded and the new record was created with the default value.
It also works fine if the Radio Group is not read-only.
I was able to fix the problem by adding a calculation to the P2_DEPTNO item to set the default value there. This of course does not show the default on the form for the new record, so I had to keep the default on the item level as well - which is a potential source of bugs when those two defaults somehow get different values (e.g., when I change only one of them and forget about the other) - the user will see one thing displayed while another will be saved. So any solutions involving keeping the default value on only one place AND visible to the end user when creating new records are welcome.
I haven't had time yet to test with other item types - maybe next week...
Have a nice weekend!
Flado

Scott,
Yes, in 1.6 this used to work fine - the radiogroup was displayed as disabled, and the default value was selected, and the not-null validation succeeded, and all I did was set the default value of the radiogroup. I have no 1.6 environment anymore to test it, but I'm sure it was working, because after I upgraded to 2.0, it stopped working and I got a bug report from a user very, very quickly :-(.
By "adding a calculation to the P2_DEPTNO item" I mean "adding a computation of the P2_DEPTNO item to the page". Sorry about me being lazy here. It was (still is, in my production application) a conditional after-submit computation (if <primary key item> is null, set <radiogroup item> to <default value>)
Thank you for the suggestion. I implemented it in the demo app. What I did was:
1. remove the default value from P2_DEPTNO
2. Add an unconditional after-header computation that assigns P2_DEPTNO with the static value 20
I am able to create new EMPs now, but nothing is selected in the disabled radiogroup on the create page, although the value 20 is saved in the session state before the items are rendered, according to the debug info (you can try it out and see).
To recap, I still need to keep the default value in two places: default of the radiogroup (to get it displayed on the create form), and in a computation (to set the session state).
Cheers,
Flado

Editable ALV with New Row and Save

Hi Experts,
I created an ALV report which is editable, add a New Row with SAVE options.
Problem is: when i try to save the changes using SAVE button in the application tool bar for the coloumn in the specific row, the event is not triggered and the changes were not available. However if i press Enter and then the SAVE the changes were available and i am able to update it.
I do not want to press ENTER after doing the changes, All i want is to press SAVE to save my changes.(one click)
How can I do that? Thanks.

Thanks satish,
From the thread,
We have to either press return key (enter) or switch between cells. But the problem here is with the user, they do not want to do it either way. All they want is to press the save button in the application tool bar after the data is changed in the cell.
Any inputs will be greatly appreicated.
Thank you.

Recommended way to design a book chapter with a set of fixed layouts?

I am starting on a book and am trying out Indesign CS6.
This is a science book, and the bulk of it uses only a couple of layout formats, typically with 3 images and some text frames at fixed positions. Each page content is independent of each other (i.e. text does not flow to the next page)
I could design the layouts (or templates) for the left and right facing pages and even set them as master pages. However, any individual page could be on the left or right facing page and the image positions are slightly different due to the gutter. Even if I override each item properly, inserting a single page at the beginning shifts all the pages from left to right and vice versa, leading to mispositioned text and images. If I had a 2-page spread master page, it would end up with duplicate objects instead. I'm trying Master Pages now because I might foresee slight adjustments to the page layout midway through the project, and don't want to reposition/resize everything over again. Ideally it should be adjustable from a single location...?
Is there an elegant way to resolve this? I am familiar with Javascript but have not dealt with it in Indesign yet, so I'm very open to using it if necessary.
Thanks in advance for any input.

Thanks Ankit. I have actually gone through several Master Page tutorials and am already overriding objects from the various Master Pages I am using.
The problem is, if I have a 2-page spread for a Master Page, inserting a page before the spread (quite common during this project) that uses the Master Page will result in duplicate objects on each page. i.e. the page will contain BOTH my overridden objects from the left side plus the master page components on the right side. It becomes a complete mess.
If I had a 1-page Master Page for a particular layout, it would only be for the left facing page, and I would face the same problem when inserting pages again.
From what I see now, Master Pages are meant for completely static components on the page and not for fixed layouts.

Audio file "open with" default setting

Hi,
Each time i export a file from Logic, i see the Logic logo, and it says "open with" Logic if i make get info.
I'd like to export audio files that would open with QuickTime as the default application.
Where is that preference located ?
thanks

You do exactly that in the "I"nfo menue - open any exported file - apple+hit "I" - select "open with quicktime" and in the field below select "change all" (translated from my german menue - then all files will open in quick time as default.

Z ALV with Default Setting in save layout option disabled

Similar Messages

Maybe you are looking for