Z condition type for surcharge need to be displayed in billing doc only.

Hi ,
I am having going to create condition type for surcharge, this condition type need to be diplayed only in billing doc.condition value should be calculated based weight of the material in delivery doc and scales in condition record.
scales values are as below:
Access key:
sales org/dis channel/ route /sales unit(KG)
DE10/02/DETX1/   1 Kilo   =   30 u20AC
skales:
DE10/02/DETX1 / 31 Kilo = 35 u20AC
DE10/02/DETX1/ 41 Kilo =   40u20AC
DE10/02/DETX1/ 51 Kilo =   45u20AC
then for 52 Kilo we have price for these item with 52 Kilo = 45 u20AC
where exactly need to do the config and development changes for displaying in condition type in billing doc only.
Thanks in advance.
Regards,
RAM

In the Pricing Procedure , maintain requirement as 24 against the Z Condition type.Now it will reflect the value only in Billing Document.
Best Regards,
Ankur

Similar Messages

Complex Condition Type for Discount Needs Assistance

Is it possible to have this kind of requirements ?
No of cases               Powder Tea/Fruit
                            Base    Cash    Total
1-9 cs                   10.00   10.00   20.00
10-19 cs               20.00   10.00   30.00
20-49 cs               25.00   10.00   35.00
50 cs & above       30.00   10.00   40.00
No of cases                Water
                          Base      Cash    Total
1-9 cs                 3.00       2.00      5.00
10-19 cs              8.00       2.00     10.00
20-49 cs              13.00      2.00     15.00
50 cs & above       20.00      2.00     22.00
No of cases                 RTD-PET
                           Base   Cash Total
1-9 cs                  4.00      3.00    7.00
10-19 cs              7.00      3.00   10.00
20-49 cs             12.00     3.00    15.00
50 cs & above      17.00     3.00     20.00
Sample products
POWDER TEA/FRUIT
     1. Mango powder
     2. Lemon powder
RTD PET
    1. Pineapple 500 ml
    2. Orange 500 ml
WATER
    1 Purewater
Scenario 1:
Customer is purchasing the following:
Mango powder - 25 cs
How much will be the total discount? SInce the customer orrdered 25 cs, the total discount that will be given is Php 35.00 based on matrix above.
However,,
Scenario 2.
If the customer purchased a combination of
Mango powder -10 cs
Pineapple 500 ml - 20 cs
Purewater - 20 cs
The total discount that should be give are:
Mango powder - PHP 40.00
Pineapple - PHP 20.00
Purewater - __PHP 22.00__
        total discount : PHP 82.00
The prolem we encountered is we cannot do the total of all products given on the matrix above.The system reads the discount per line item. We need to generate first the total orders so we can get the correct computed discount base on the matrix.

Hi Jefferson Thomas Javier,
          To take in account the whole quantity of items to calculated the discount condition, you should make the condition type of discount as a Group condition (it is a check box within the configuration of the condition price), in this way the quatity taken to calculate the discount is the sum of all items.
Thanks,
Mariano.

Condition Types for Packing and forwarding

Hi ,
We wanted to add packing and forwarding charges to the material cost, please tell me what condition type / confuguration i need to use .
Regards
Swapna

HI,
You need to create Z condition type by copy condition class Discount or surcharge and Calculation type Fixed Amount.
i.e. Condition type FRB1- Frieght value will work.
Step 1) Create by coping FRB1 Condition type, Change name i.e. Pack For Val.
Step 2) Change control Data 1)
Condition Class - A (Discount or surcharge)
Calculat. Type-B(Fixed amount)
Further changes will depend upon your required ie. You want to create Header condition or item condition.

List of sales condition types for a material

Hi,
I have a material and maintained pricing and discount condition types for that material. I guess VK33 helps to view what condition types maintained for that material.
However when I tried VK33 and selected the material from the conditions from the node on the left hand side and entered the sales org, dist. channel and material and executed after I clicked on the display icon on the condition type, Sales org, Dchl material no conditions are displayed.
Please let me know how I can view the list of sales condition maintained for a specific material.
Thanks.

Hi Giri,
Thanks for the response.
In VK13 I should enter the condition type then I can hit condition information so that the details of all records maintained for a specific condition type will only be displayed but not for other condition types.
In V/LD, I am getting the list only for individual prices. If I insert 17 u2013 Discounts and surcharges by customer or 18 u2013 Discounts and surcharges by material, I am unable to get the list. Is it anything because of the u2018release statusu2019? We had not checked the u2018release statusu2019 field for the tables assigned to access sequence for the condition types.
As per the requirement business wants to view the list of u201CDiscounts and surcharges by customer/materialu201D. I think this is possible if I run the report provided by inserting values 17 or 18 but the unable to view the list. Any config settings required to activate?
Please let me know how to view the list of condition types.
Thanks

New Condition type for pricing

Hi,
I have a requirement wherein I want to create new condition type for add on cost of material with manaual entry . this condition is to be given in inforecord.
How to proceed? also, this contion type to be inserted in pricing schema??

Dear Smitha,
You may ask what is the condition type?
For example:
- discounts, surcharges or tax taxes add to net price
- delivery costs, cash discounts add to effective price
Discounts or surcharges may be percentage based, quantity dependent, or absolute.
Best Regards,
ian, Wong Loke Foong

Pricing: Condition type for advance "ZADV" can be enterted twice

Hello,
I have defined condition type for advance as ZADV in pricing procedure.
Issue: Now teh end user is able to enter the advance conditype types "ZADV" in the sales order, is it any way possible that it should not allow the condition type to be entered twice.
Regards
Suvin.S

HI,
Issue: Now teh end user is able to enter the advance conditype types "ZADV" in the sales order, is it any way possible that it should not allow the condition type to be entered twice.
1*.Suppose Condition type ZADV having Condition Class "Discount or Surcharge " system will allow to enter manually second time also*
2. Suppose Condition Type ZADV is mandatory to few customer and also customers then do the some changes in the condition Type under the Tab "Changes which Can be made " we can find out the Manual Entries fields in that try to mentioned "D - Not possible to process manually "
Regards,
Prasanna
Edited by: prasanna_sap on Sep 6, 2011 8:35 AM

Condition Records For Tax Condition types for SAP 4.7

Dear Experts,
What is the procedure to maintain condition records for tax condition types like CST , VAT and Service Tax. We are not using CIN. In MM01 and XD02 tax classifications i have maintained UTXJ condition Type and also maintained the above mention tax condition types.. But when i create condition records for UTXJ in VK11 the sysytem is asking for Tax code. In FTXP when i defined Tax code A1 for Tax ProcedureTAXIN1 where i maintained all the Tax condition types there.But i am unable to save the Tax % in FTXP.When i try to save the tax code it is not saving.
Is there any other procedure to maintain Tax condition types for SAP4.7.
My Pricing procedure that i maintained in V/08 is Z00001.
Regards
Jyoti

Hi Jyoti
Since you are not using CIN, you can do the follwing for tax conditions
Check the assignment of the TAx procedure to country
once u do this , you will be able to maintin the vendor and customer records for MWST type for taxes
then create condition records for MWSt with access sequence MWST in condiution type or design one suited to your needs
alternatevely in the current procedure you can change access sequence for condition type UTXJ form the current one to MWST and then maintain condition records
hope this helps
thanks
Akasha

Condition types for service tax

Hi,
We are configuring the system for TAXINN.
Which condition types to be usd for service tax, ECess on service tax and HECess on service tax?
are their any standard condition types for it or we need to create those?
Regards,

Hi,
For Deductible;
JSRT     IN:A/P Service Tax %
JEC3     IN: A/P ECS for ST %
JES3     IN:A/P SECess on ST
For Non-deductible; (Copy of Above with A/c Key "NVV")
ZSRT     IN:A/P Service Tax %
ZEC3     IN: A/P ECS for ST %
ZES3     IN:A/P SECess on ST

Condition type for fee - no change of moving price or balance sheet account

Hi, hope you can help me.
We need a new condition type for a kind of fee which has to be paid to the vendor and used in the purchase order.
This is a condition type which
- has to be part of the invoice
- has to be posted as a kind of accrual
- must not! change the price of the material or the balance sheet account
If we use freight conditions the moving price is changed.
Because it is dependent on the material (and therefore a condition record works great) we can't or better don't want to use a second position in the purchase order.
Does anybody have a solution for this one?
PC

Thanks for the answer!
This is what I already tried, but it still changes the balance sheet account and the moving average price.
This is what I customized:
Condition ZXYZ
Cond. class A
Calculat.type C
Cond.category B
Item condition yes, delelte, amount/percent and Qte relation yes
Scale base C
Accruals yes
In the Calculation Schema it's defined just before the Actual Price, with Statistical-checkbox marked and Account key ZE1, Account key - accruals / provisions ZE2.
Do you have any idea what I have to change or what else to try?
Thanks a lot!

Create a new condition type for tax... and assign in the Tax determniation

Hi,
I need to add custom condition tax type, i tried creating the condition in OBQ1 and add that condtion in FI pricing OBQ3, now I want to confirm what is basic conept means whenever we create on condtion in OQB1 and add in OBQ3.
i need to add that in Sales order and need to maunally populate that in the sales order.
could anybody suggest to create a new condition type for tax.(full process).
Thanks
shankar

Hi,
Goto the T.Code "V/06".Create one new "Z" condition type.
Maintain the Condition Class as "D(Taxes)".
Calculation type as "A(percentage)".
Cond. Category as "D(Tax)".
Select the tick mark for "Group Condition" if it is applicable for you.
In the next step assign this condition type to your pricing procedure by using the T.Code "V/08".
Also maintain access sequence by using the T.Code "V/07" and assign it to your Condition type.
Now this condition type will appeared in your sales order after maintain teh condition records.
Regards,
Krishna.

Condition types for capital purchase

Dear All,
we have a capital purchase process for which JCI1 & JCI2 conditions are created for 1st year and 2nd year similarly we have condition type for ECESS JCC1 & JCC2 but i need SHECESS conditon types for the same
please help
Regards

Hi,
You maintain your material in J1ID as a Capital goods insted of Raw material than the functionality of your requirement will be fullfilled.

How can i get different Condition Type for third-party Purchase Order?

Hi, experts,
for standard PO my Schema works well. now I want to get a different condition type for third-party purchase order. I try to extend field catalog (Pricing Purchasing). The Field PSTYP exists already. However, it is not provided in the field catalog.
How could i do?
Thanks
Rene

Hi Rene,
If you are seeing fields in the field catalog but are not seeing this field when creating the condition table then the field probably does not exist in the KOMG structure for allowed fields for condition structures. KOMG represents the total of KOMK and KOMP which are the pricing communication structures. If your field is not there then you need to append it to item data in INCLUDE KOMPAZ in KOMP since this is an item level field. If it were a header level field you would append it to include KOMKAZ in KOMK. The inclusion of new fields in KOMK or KOMP automatically means that they are also included in KOMG.
After doing this you will see the field when creating a table. There is further documentation on this process in the IMG under SPRO-> Materials Management-> Purchasing-> Conditions-> Define Price determination Process -> System Enhancements - View the documentation associated to this node in the IMG
Hope this helps,
Matt

SAP CIN SD Condition Types for NCCD, ECS, SECESS

Hi,
i have a question. what are the condition types i need for getting NCCD, ECS, SECESS inside my Pricing Procedure. I looked up the Pricing Procedure JINFAC standard and found only Condition Types for:
BED
AED
SED
CESS
Why are they not inside the standard Pricing Procedure JINFAC? What are these condition types and what do i have i to do for implementing those to my Pricing Procedure? (creating by copying it from BED condition types?)
Thank you very much for your help,
Conrad

If you are in TAXINN, following are the CIN condition types
BED   JEXP or JEXQ
ECS   JCEP or JCEQ
HCS   JCET or JECT
If you are in TAXINJ, then following are the CIN condition types
BED     JMOD
ECS     JECS
HCS     JA1X
thanks
G. Lakshmipathi

New condition type for freight

hi,
i want to create new condition type for freight like some different ways of transportation like (roadrailair), three are at a time, which user exit i want to take and where it will trigger

hi,
as you have to have three condition types for sales order
ROAD - VENDOR1 - ZVE1
RAIL - VENDOR2 - ZVE2
ROAD - VENDOR3 - ZVE3 - into sales order.
create a screen exit and add this in your delivery addational tab page - MANUAL ENTRY BY THE USER.
with
LEG 1 - ROAD - VENDOR1 - ZVE1
LEG 2 - RAIL - VENDOR2 - ZVE2
LEG 3 - ROAD - VENDOR3 - ZVE3
create a Z table which captures the information for this.
and link this table to FB70 - t.code
and settle it individually as per FFA.
balajia

Condition types for Material

Hi,
I have got a scenario where the customer is going to maintain "Z" condition types for a material(1 for sales price and 1 for purchase price). I can read the correct price for this material at the Sales Order maintenance and PO maintenance using some standard function modules
SALES_CONDITION_READ/ME_PO_PRICE_SIMULATION.
as these condition types are maintained in the pricing schema and hence are returned in the correctly.
I have problem when I try to read the purchasing price for this condition type(material) while creating the sales order. Here I have only the material information to read the price. Can anybody suggest how I can read the correct purchase price while creating the sales order.
Thanks in advance.
Best Regards
Malthi

HI Malthi
I would recommend you use BAPI: <b>BAPI_SALESORDER_SIMULATE</b>. This will give you the conditions how the sales order is going to look when itz created.
This BAPI is mainly used for:
1. Checking ATP Qunatities
2. Conditions/Prices
Hope this helps.
Kind Regards
Eswar

Z condition type for surcharge need to be displayed in billing doc only.

Similar Messages

Maybe you are looking for