Z field added in std table not reflected in PA30

Hi experts,
I m trying to enhance IT 0021 with some additional fields.. I have added a field in IT0021 through PM01. Also i have assigned the custom program generated for IT0021 to the standard program in  "Assign Enhancement"  in PM01.
The problem is getting , the Z field is getting reflected in PA0021 (Under CI_0021 structure). But it is Not getting reflected in PA30..
Can anyone tell me the reason for this problem?
Regards,
Shanthi

Hi,
You will have to define where this new field needs to be added.
go to SE51
give Program Name - ZP002100
Standard screen - 0200
The new field which you have created might be a radio button, text input, check box etc
depending upon the type of field you have added, create that on this screen , double click and give reference to the new field that you have created.
hope this helps
Ajay

Similar Messages

  • Service request fields enhanced through AET are not reflecting in BW DS

    Hi All,
    the CRM developer has added 3 service request fields to crmd_orderadm_h, crmd_service_h via AET. He has marked all the 3 fields as 'BW reporting relevant'.
    I have now checked the BW extractors in the hope that these 3 fields will now be appended to the BW service request datasources automatically.
    But instead of adding the fields to service request datasource(0CRM_SRV_REQ_INCI_H)(BUS2000223), it added the 3 custom fields to process datasource 0CRM_SRV_PROCESS_H.
    I am not sure what exactly have gone wrong . Is there a way to get these custom fields automatically into 0CRM_SRV_REQ_INCI_H.
    Thanks in advance,
    Ramz

    Hi Ramz,
    this seems to be identical to
    Re: Fields enhanced through AET are not reflecting in CRM DS Extract structure
    Please find my reply there.
    Best regards
    Matthias

  • Extend dynamic selection for a field added on PRPS table

    Hi Gurus,
    I want to see the field that I've added in PRPS table as part of dynamic selection on the reports like S_ALR_87013542/ S_ALR_87013532. The LDB for project systems is PSJ. How do I make it appear as a dynamic selection on the selection-screen criteria for these reports?
    Thanks...

    Hi,
    We have done this a lot on my project.  Follow these steps:
    (1) Transaction SE36 for logical database PSJ
    (2) Choose menu path Extras -> Selection views (Ctrl+F7)
    (3) Change the "Origin of view" to SAP
    (4) Find the PRPS_R node in the top, right "Tables/nodes" view.
    (5) Double-click PRPS_R.
    (6) Find your custom field that you added in PRPS (in the bottom "Table fields/node fields" view.
    (7) Choose and enter a 2-character Function Group ID (see the top, left view) next to the new field.
    (8) Save and transport...
    Best Regards,
    James Gaddis

  • New attribute added in BO, but not reflecting in WF container

    Hi Experts,
        Purchase req overall release  workflow was using a z business object in my requirment, now i have needed some enhancements so i made some changes like i added few attributes in BO. then i did the delegation.
    but the new attributes are not reflecting in Workflow container ?
    what i suppose to do for make them reflect there?
    helpful answer will bw rewarded...
    Regards Dev..

    Hi,
    We use Generate to make BO available for the runtime system. So only after generating the BO, runtime system will pick up the new changes. This is same like when we activate the report in SE38 transaction.
    The system can only generate an object type if none of the superordinate object types contain errors. If these object types have not yet been generated, they are generated as well. When an object type is generated, all subtypes are generated as well provided they do not contain any errors.
    Thanks
    Yogesh Sharma

  • Additional text field in Infoset deleted but not reflected in field selection in Query

    Hi,
    I have deleted an additional text field in infoset. It was used in one query.
    Even in the query it is deleted, but when in field selection screen i am not able to delete.
    If i try to execute the query, I get dump (syntax error) saying in field type(additional field) doesnot exist.
    Can anyone pleassseee help me in this.

    Hi San,
    I am trying to understand. How could you separately delete an additional text field associated with a main field?
    Jogeswara Rao K

  • Sending custom field added in Standard table through idoc

    Hello Folks,
    We have a requirement where custom field of a standard table PA0002 needs to be sent through idoc only to a desired destination system.
    My Approach:
    I have created a custom segment having custom field from PA0002 & mapped this segment in T777D table.
    But the problem with above, is all the system who are receiving PA0002 will be receiving this custom segment also including desired system.
    How can it be filtered?

    Hi,
       In BD64 you can do the segment level filtering. Go to BD64, search for your distribution model there drill down to "filter settings" the make the required segment filtering.
    Thanks,
    Asit Purbey.

  • Adding tables not reflecting in data control palette

    hello
    i am using jdev 10 g and oracle xe
    i connected the database to the new aplication, then i can now use the datas but in the middle of my work i want to add another table, how can i add the new table in the data control palette so i can continue my work.
    i am doing my project all over again because i always forgot some tables that i needed.
    can you give me the steps in adding the tables. the REFRESH button also doest work for me
    thanks!

    You didn't mention what technology you are using to access your database, but assuming it is ADF Business Components - then you can create a new entity and view at any time for more table.
    Also make sure to edit your application module and get the new view object exposed in the data model.

  • SRM 7.0 New custom fields added to view do not appear in the component conf

    Hi
    I added two custom fields to the view V_QTE_DOFC_I_DESC of the WD componenet /SAPSRM/WDC_DODC_QTE_I_DS. This view gets called when bidder is trying to create a bid and clicks on add Substitute Item in the Item tab. This view is simply a popup window where we can enter ther substitute item.
    I added two custom fields to the context of the above view and placed on the layout of the view as input fields. Then I tried to modify the component configuration /SAPSRM/WDCC_DODC_QTE_I_DS_SUB. When I look in t he web dynrpo built-in for the view V_QTE_DOFC_I_DESC, I don't see the custom fields that I just added. As a result, these custom fields are not displayed when I try to substitute an item. Could anyone tell me how to brining in these two custom fields into the component configuration.
    Any help is greatly appreciated.

    Hi Prasuna,
    Sorry ..You are right..I was looking at some other WDC related to contract data..It you map the CUFs to /SAPSRM/S_CLL_CTR_ITEM which has the include structure INCL_EEW_PD_ITEM_CSF_CTR then it should work fine.
    If you do this, are you able to view the new fields on the screen?
    you mentioned that you are not able to save the data to the table.
    Include your fields in INCL_EEW_PD_ITEM_CSF as well because if you add CUF to any of those doc types, you also have to add those CUF to the global structure for CUF documents.
    Also Check if you fields are there in structures BBPS_CTR_CUF_ITEM,BBPS_CTR_UI_ITEM and BBPS_CTR_ITEM.
    Check whether you have implemented the BADI's like BBP_DOC_CHECK_BADI ,BBP_DOC_CHANGE_BADI and BBP_DOC_SAVE_BADI . check out the structures (whether they having the CUFS) used in those if you have implemented any of them .
    Regards
    Lavanya
    Edited by: LAVANYA CHAVA on Aug 25, 2010 10:10 AM

  • Problem in delta management for custom fields added in standard Table

    Hi developers,
    we have a problem, when a sales order is modified in a field custom, added in tables (VBAP-VBAK), the delta BW doesn't recognize the modifications. The data type of these fields haven't the flag (Change document) setted in
    view Definition.
    If this flag is setted, Can the delta BW recognize the modifications of the custom fields?
    Best regards
    Domenico

    You cannot get delta by just appending fields to extract structure & writing the user exit coding as this user exit code is run by the extractor after the X- and Y- tables are compared to create the before & after images.
    You have to do this procedure by enhancing  LIS comm structures like MCVBAP (for example).
    Please refer to OSS note 576886 for complete details.
    Kumar Gudiseva.

  • Custom field added by AET  is not editable

    Hi All,
    I have created 2 fields in for ERPADMINI BOL node. but these fields are not editable. The attribute properties are coming as Read only at runtime.
    How to make these fields editable ?
    I have searched in forums but couldn't find any solution, please help.
    Thanks
    Krishna

    Hi Bhushan,
    The code was there already for some of the fields.. same way i added for my field, but no luck ..
    Below is the code. Last field 'ZZPRDCT_SPECIFI' is my field.
    IF iv_object_id EQ 'ITEM'.
         CLEAR ls_supply.
         ls_supply-field = 'ZZDEAL_CODE'.
         ls_supply-check = 'N'.
         APPEND ls_supply TO ct_supply.
         CLEAR ls_supply.
         ls_supply-field = 'ZZRANDOM_LENGTH'.
         ls_supply-check = 'N'.
         APPEND ls_supply TO ct_supply.
         CLEAR ls_supply.
         ls_supply-field = 'ZZERROR_CODE'.
         ls_supply-check = 'N'.
         APPEND ls_supply TO ct_supply.
    CLEAR ls_supply.
         ls_supply-field = 'ZZDSCAL'.
         ls_supply-check = 'N'.
         APPEND ls_supply TO ct_supply.
    *-> José Sabino - 15.01.2013 - End
    *-> exrodrg - 06.05.2014 - Begin
        CLEAR ls_supply.
         ls_supply-field = 'ZZPRDCT_SPECIFI'.
         ls_supply-check = 'N'.
         APPEND ls_supply TO ct_supply.
    ENDIF.

  • Field added to cobl does not appear in FB01 interface

    Hi!
    I have added OXK3 transaction and set this field as "Opt Entry", but the field does not appear in FB01 transaction.
    I've also tried "Req Entry" status for new field it gave no effect.
    How this field can be enabled in the interface of standard FI transactions?
    Thanks!

    Some questions
    -Did you solve your problem ?
    -Did you come through OSS <a href="https://service.sap.com/sap/support/notes/174413">Note 174413 - Customer-specific fields in new Enjoy transactions</a> ?
    Regards

  • New data in Decision tabl not reflected in upgraded BRM

    Hi All,
    We upgraded our server from CE 7.2 to NW 7.3. All BRM DC were broken. We changed them in the developer studio and added the required dc in 7.3. It deployed fine. Now, we changed the values in decision table from rules manager as well as developers studio. Calling webdynpro application still showing the old value. We restarted the server but did not work.
    Please help.
    Thanks
    Raktim

    Hi Raktim,
    did you found a solution to this problem?
    Regards.
    Pedro Aires

  • Custom field added by AET is not editable - not added to BOL structure

    Hi ,
    We had created a new field using AET in Products Assignment Block of Campaigns as a line item.This is a drop down field.
    But in WEB UI,this field is being displayed as non-editable dropdown.
    In AET, we opted Business Object as MKT_CPG and subobject as PRD.
    But the issue is that the Dependent objects CPGProducts and CPTProducts BOL Entity Structures are not getting enhanced with this new field and i guess , so the field is appearing as non-editable in WEB UI.
    PRODUCTS context node is using the structure CRMS_MKTPL_IB_CPG_PROD(BOL object CPGProducts).
    All other related object structures(Structure of that of Dependent Objects AGRProduct ,DLMProduct etc) are being appended with the newly created field.
    Component : CPGOE_ABLOCKS
    View : CPGOE_ABLOCKS/OVELProducts
    Context Node : PRODUCTS
    Attribute structure that needs to be enhanced for our requirement : CRMS_MKTPL_IB_CPG_PROD.
    We are not using Genil Shared memory in our dev system.
    Any pointers to solving this problem is highly appreciated.
    Thanks
    Swapna.

    Hi Sherwin,
    Please follow the corrections in note : 1472567
    I only raised an OSS message back in July 2010 with SAP when I had similar requirement.
    Regards,
    Naresh

  • Changes to table not reflected in Java query

    Hello All!
    I'm running Oracle J Developer 11g.
    I am quite new to executing .sql commands using Java and so am feeling my way around.
    I used the IDE's SQL Worksheet and created some tables in a database.
    I also used this SQL Worksheet to populate the tables and verified the contents as well.
    Then using Java I wrote some code to issue a Select command to a table, store the contents of the query into
    Some Arraylists.. etc. etc..
    Anyway I then ran the program and everything seemed to work fine.
    Then I ran some sql script to Insert more rows into the table.
    When I do a sql query select * command, my new rows are there.
    Then I run the Java program and the new rows don't seem to be there???
    Now I'm stumped. Am I missing something here?
    Please can anyone enlighten me?
    Any help would be welcome.

    Hi,
    conn.setAutoCommit();Its used when you want to work in a transaction. If a connection is in a auto commit mode then all sql stmts will be executed and commited as individual tranasction. Else sql stmts are grouped into a transaction which needs to be commited by a method or rollback.
    So, after your transaction completes, do return the auto commit state to true.
    or
    try {
    // Connect to Oracle using JDBC driver
    System.out.print("*** -> Connecting to -> " + connectionURL + "\n");
    conn = DriverManager.getConnection(connectionURL,"SYSTEM","PASSWORD");
    System.out.print("*** -> Connected as URL -> " + connectionURL + "\n");
    // TURN OFF AutoCommit
    //System.out.print("*** -> Turning Off AutoCommit...\n");
    conn.setAutoCommit(false);
    stmt = conn.createStatement (ResultSet.TYPE_FORWARD_ONLY, ResultSet.CONCUR_UPDATABLE);
    System.out.print("*** -> Opening ResultsSet...\n");
    results = stmt.executeQuery (sql);
    conn.commit();
    } catch(SQLException sqel) {
    conn.rollback();
    }Twinkle

  • Enque deque on updating std table VBEP

    Hi Gurus,
    i need your help .....
    here is my problem..
    i added 4 z fields to the std table VBEP.
    now i am trying to add/update values to those newly added fields through my program .
    CALL FUNCTION 'SD_SALES_DOCUMENT_ENQUEUE'
        EXPORTING
          VBELN              = SALESORDER
          I_CHECK_SCENARIO_A = 'X'
          I_VBAK             = INT_VBAK
        EXCEPTIONS
          FOREIGN_LOCK       = 1
          SYSTEM_FAILURE     = 2
          NO_CHANGE          = 3
          OTHERS             = 4.
    If any error occured
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        RETURN-TYPE = SY-MSGTY.
        RETURN-ID = SY-MSGID.
        RETURN-NUMBER =  SY-MSGNO.
        RETURN-MESSAGE = SY-MSGV1.
        RETURN-MESSAGE_V1 = SY-MSGV2.
        RETURN-MESSAGE_V2 = SY-MSGV3.
        RETURN-MESSAGE_V3 = SY-MSGV4.
        RESULT_CODE = 'E'.
        RESULT_TEXT = 'Error is updating.'.
        EXIT.
    Successful
      ELSEIF SY-SUBRC = 0.
    Update VBEP
        UPDATE VBEP
         SET ZZARRIVAL_DATE = ARRIVAL_DATE
             ZZARRIVAL_TIME = ARRIVAL_TIME
             ZZLOADING_DATE = LOAD_DATE
             ZZLOADING_TIME = LOAD_TIME
         WHERE VBELN = SALESORDER
         AND   ETENR = WC_MAX_ETENR.
    If successful set flag
        IF SY-SUBRC = 0.
          COMMIT WORK.
          RESULT_CODE = 'I'.
          RETURN-TYPE = 'I'.
          RETURN-MESSAGE = 'Successful in updating table.'.
    If unsuccessful set flag
        ELSE.
          RESULT_CODE = 'E'.
          RETURN-TYPE = 'E'.
          RETURN-MESSAGE = 'Update was terminated'.
        ENDIF.
      ENDIF.
    but here i dont know what is the deque function module...
    so because of that while i creating and accepting the order it sayd it is being edited by user...
    if i comment the above code then it doesnt give ant error...
    please help me in creating lock object to update or is thr any std lock objects exists...!!!
    waiting for your valuable reply.
    regards
    sanjay

    Hi Sanjay,
    This all depends upon the context of where your code is (stand-alone or within the SD userexits when processing sales orders).
    The function you are using looks like a collective lock FM for different lock objects ENQUEUE_EVVBAKE and CSLEO_ENQUEUE.  You could always call the individual DEQUEUE objects separately or perform a COMMIT WORK.
    However, I am concerned over your statement 'so because of that while i creating and accepting the order it sayd it is being edited by user...' which sounds as though you are in userexit processing (could be mistaken). 
    If this is the case then you will need to modify the contents of XVBEP in something like USEREXIT_SAVE_DOCUMENT_PREPARE - no locking is required as the transaction you are in has the lock.
    Hope this helps.  If not then maybe provide more context to where your code is in the process.
    BTW - I would also revisit your design as I personally would not want to directly update SAP tables
    Thanks,
    Pete

Maybe you are looking for