Z-reports not used...

Hi,
I am involved in a SAP R3 4.6C server where there are 900 custom Z reports. Is there a way by which one can know which Z report is mostly used and the reports that are not used by users.
The idea is to identify if the reports are needed and cleanse the system of unused Z-reports.
Regards,
Anirban.

Hi
U can try to use the statistic trx like STAT or ST03: but here u can find out only the data for the last period: it's the last week or the last month, anyway it can't find out the data for whole life of the system, but the stored period is usually not very long.
So if u need to make sure u would analyze the data for a long period, and so run the statistic trx periodically.
Max

Similar Messages

I Need some Itractive Reports not using alvs and any other advanced

I Need some Itractive Reports not using alvs and any other advanced topics like include and any other i need simple Intractive reports.

Hello,
Check this sample reports:
Program name                   Report title
DEMO_LIST_INTERACTIVE_1        Creating Detail Lists
DEMO_LIST_INTERACTIVE_2        List Administration
DEMO_LIST_INTERACTIVE_3        Page Headers in Detail Lists
DEMO_LIST_INTERACTIVE_4        Messages in Lists
If useful reward,
Vasanth

Parameter weirdness: Report not using user selected parameter value

I am writing my first report and cannot for the life of me figure out how to deal with this issue.
When I call a report and pass the parameters in, it appears that the user cannot then change the parameter values and run the report again even though the parameters are displayed. When user hits run report, the values revert to what was passed in by original
call.
Scenario
Report B has Parameter Period : Month, Quarter, Year displayed in a drop down list.
Report A calls Report B and passes it the parameter: Quarter.
Report B loads. User now changes parameter to Year via the drop down parameter list and hits Run Report.
Instead of loading the report with user selected value (Year), it reverts back to the parameter it was called with, Quarter.
I have tried changing the refresh option on the parameter to always, but no joy.
The only way that seems to work is to put textboxes on the report to change the parameter.
How can I stop this behaviour, and use the users new selection.
This should be really straight forward, and its driving me nuts that its not allowing the user to change the parameters
Any help would be much appreciated.
Thanks Jon

Hi Jon,
Did you use SSRS 2012? Based on my test, the issue is occurred in SSRS 2012 Business Intelligence Development Studio (BIDS). When we deploy the report to report server, it will disappear.
In this situation, we can add another duplicate parameter to work around this issue. Please add two parameters in the report, and then hide one of the parameter. We can pass the parameter value to the hide parameter. If we want to select other values, we
can change the visible parameter values.
Alternatively, I recommend you that submit this suggestion at
https://connect.microsoft.com/SQLServer/. If the suggestion mentioned by customers for many times, the product team may consider to add the feature in the next SQL Server version. Your feedback is valuable for us to improve our products and increase the
level of service provided.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Report not using aggregates

Hi,
I have a Crystal report based on BW query. When I run the query its using the aggregate and getting me the result with in a minute. But when i run the same query through CR its taking more than 15 mins to complete and its not hitting the aggregate. I am using MDX driver. No free characteristics are used in the report. Kindly help me in this regard to optimize it.
Regards,
Subbu S.

Hi ,
IF the query is not hitting the aggregate then from which infoprovider does the OLAP PROCESSOR taking the data . Either the query o/p is getting data from the another aggregate or from parent infocube.
THanx & Regards,
RaviChandra

UCCX 8.5 - Custom reports (not using Crystal)

I have a customer requesting a report of the calls per hour per agent...Say I go into the reporting system that I have setup and the person is able to select a date range and queue name, the output should show a series of tables (one for each day) that includes agent name, with the number of calls taken per hour....
can anyone point me in the right direction of a sql statement that would querry the database to do so?

Custom reporting on the UCCX platform can be a real chore, luckily if what you're doing is only a modification of an existing report you can create the new report with minimal hassle.
UCCX primarily uses stored procedures to generating report data, the procedure name and variables it consumes are provided in the report defintions provided with the HRC client (check the installed directory). This is an XML file you can parse.
From there, you may customize to your hearts content and display to whatever interface deemed appropriate.
You may wish to consult both the UCCX Database Schema and Historical Reports developer guide for your partitcular version of UCCX.
HTH,
Tanner Ezell
www.ctilogic.com

Report not using the cache entry

Hi
I have created a report in which one of the measure is derived uses Evaluate function, when report is run for the first time to fetch data its taking less time (say 10 seconds).
Though without changing any parameter if the report is run for the second time by the same user its taking more time (around 30 to 40 seconds).
Any suggestions please
Thanks!

Are you sure report results are being cached?
As far as I know, using the EVALUATE function prevents OBIEE from caching the report.
Set the loglevel of the user to 5 or above, log in, run the report and check the NQQuery.log file
Cheers,
Daniel

How to track personal details changes in the report without using triggers on the database tables

Hi There,
I'm having a requirement to track the oracle HRMS Personal details changes in the report not using the triggers.
ex: if some changes the address of the person, then that changed values should be populated in the report.
Please find below query:
If any of the following columns data is updated, the new value should be populated in the report.
SELECT PAPF.PERSON_ID                                                       PAPF_PERSON_ID
,      PAPF.EMPLOYEE_NUMBER                                               EMPLOYEE_NUMBER
,      PAPF.FIRST_NAME                                                            FIRST_NAME
,      PAPF.LAST_NAME                                                            LAST_NAME
,      TO_CHAR(PAPF.DATE_OF_BIRTH ,'DD-MON-YYYY')     DATE_OF_BIRTH
,      ADDR.ADDRESS_LINE1                                                   ADDRESS_1
,      ADDR.ADDRESS_LINE2                                                   ADDRESS_2
,      ADDR.ADDRESS_LINE3                                                   ADDRESS_3
,      ADDR.TOWN_OR_CITY                                                    TOWN
,      ADDR.REGION_1                                                              COUNTY
,      ADDR.POSTAL_CODE                                                     POST_CODE
,      ADDR.COUNTRY                                                              COUNTRY
,      PAY.PAYROLL_NAME                                                     PAYROLL_NAME
,      PLN_TYP.NAME                                                              PLAN_TYP
,      PLN.NAME                                                                     PRODUCT_NAME
,      BOF.NAME                                                                     COVERAGE
FROM   PER_ALL_PEOPLE_F                                                PAPF
,      PER_ALL_ASSIGNMENTS_F                                          PAF
,      PER_ADDRESSES                                                        ADDR
,      PAY_PAYROLLS_F                                                       PAY
,      BEN_PRTT_ENRT_RSLT_F                                                 PEN
,      BEN_PL_TYP_F                                                         PLN_TYP
,      BEN_PL_F                                                             PLN
,      BEN_OIPL_F                                                           BOIPF
,      BEN_OPT_F                                                            BOF
WHERE 1                                     = 1
AND PAPF.PERSON_ID                          = PAF.PERSON_ID
AND TRUNC(SYSDATE)                          BETWEEN PAPF.EFFECTIVE_START_DATE AND PAPF.EFFECTIVE_END_DATE
AND TRUNC(SYSDATE)                          BETWEEN PAF.EFFECTIVE_START_DATE AND PAF.EFFECTIVE_END_DATE
AND PAPF.PERSON_ID                          = ADDR.PERSON_ID
AND ADDR.PRIMARY_FLAG                       = 'Y'
AND ADDR.DATE_TO                            IS NULL
AND PAF.PAYROLL_ID                          = PAY.PAYROLL_ID(+)
AND PEN.PERSON_ID                           = PAPF.PERSON_ID
AND PEN.BUSINESS_GROUP_ID                   = PAPF.BUSINESS_GROUP_ID
AND TRUNC(SYSDATE)                          BETWEEN TRUNC(PEN.EFFECTIVE_START_DATE) AND TRUNC(PEN.EFFECTIVE_END_DATE)
AND PEN.PRTT_ENRT_RSLT_STAT_CD              IS NULL
AND PEN.SSPNDD_FLAG                         = 'N'
AND ( PEN.ENRT_CVG_THRU_DT                  >= TRUNC(SYSDATE)
OR    PEN.ENRT_OVRIDN_FLAG                  = 'Y')
AND EXISTS(SELECT PIL.PER_IN_LER_ID
           FROM   BEN_PER_IN_LER PIL
           WHERE PIL.PER_IN_LER_ID         = PEN.PER_IN_LER_ID
           AND    PIL.BUSINESS_GROUP_ID     = PEN.BUSINESS_GROUP_ID
           AND    PIL.PER_IN_LER_STAT_CD    NOT IN ('VOIDD','BCKDT'))
AND PEN.PL_TYP_ID                           = PLN_TYP.PL_TYP_ID
AND TRUNC(SYSDATE)                          BETWEEN PLN_TYP.EFFECTIVE_START_DATE AND PLN_TYP.EFFECTIVE_END_DATE
AND PLN_TYP.PL_TYP_ID                       = PLN.PL_TYP_ID
AND TRUNC(SYSDATE)                          BETWEEN PLN.EFFECTIVE_START_DATE AND PLN.EFFECTIVE_END_DATE
AND PLN.PL_ID                               = PEN.PL_ID
AND PEN.OIPL_ID                             = BOIPF.OIPL_ID(+)
AND TRUNC(SYSDATE)                          BETWEEN NVL(BOIPF.EFFECTIVE_START_DATE,HR_GENERAL.START_OF_TIME) AND NVL(BOIPF.EFFECTIVE_END_DATE,HR_GENERAL.END_OF_TIME)
AND BOIPF.OPT_ID                            = BOF.OPT_ID(+)
AND TRUNC(SYSDATE)                          BETWEEN NVL(BOF.EFFECTIVE_START_DATE,HR_GENERAL.START_OF_TIME) AND NVL(BOF.EFFECTIVE_END_DATE,HR_GENERAL.END_OF_TIME)
AND (:P_SYSDATE)                            BETWEEN TRUNC(PEN.ENRT_CVG_STRT_DT) AND TRUNC(PEN.ENRT_CVG_THRU_DT)
AND (CASE WHEN :P_PAYROLL_ID IS NULL THEN 'Y' ELSE NVL((SELECT 'Y' FROM DUAL WHERE PAY.PAYROLL_ID = :P_PAYROLL_ID), 'N') END) = 'Y'
AND PAPF.LAST_UPDATE_DATE                   = (:P_SYSDATE) ;
--AND PAPF.LAST_UPDATE_DATE                   BETWEEN to_date(:P_SYSDATE) and (to_date(:p_sysdate) + INTERVAL '31' Day);
--AND (:P_SYSDATE)                           = PAPF.LAST_UPDATE_DATE ;
Thanks

check this -
Re: Best Event-Based notifications for Sox Complience?

Report output not using full page.

I have a report that does not use the full screen to display. The output display on about a 1.5 to 2 inch section of the page and the rest is white space. How do I get it to use the full page?

Hi Raymist123,
If I understand correctly, the issue which you occurred is that the report content only displayed about 1.5 to 2 inch. As per my understanding, I think this issue is caused by the report content including all the report items (table, matrix, list, chart,
gauge, text boxes etc.) is only occupied 1.5 to 2 inch on the report design surface. If in this case, we can try to expand the sizes of all the report items to fix the issue. And please make sure that the PageSize of the report have set to 8.5 x 11.
If this issue is still existed, could you please post the screenshot about the design surface and the all the size properties? Then we can make further analysis.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Can not print report when using HTML or DHTML

Can not print report when using HTML or DHTML. When I open the report and click the print icon I get a small blank dialog box and then nothing. If I change to activex it works and I can print.
Any Ideas?
Thanks
Jeff

Hi,
I did not come across this situation before. Did you apply any fix packs. Try to check whether its a issue which can be fixed by applying fix pack( try to check release notes of fix pack and see if they mentioned any thing about this).
Thanks,
SK.

MM-Report to see the materials which is not used from last 3 months

Dear All,
I want to find out the materials which are not used from last 3 months.Is there any report?
Thanks
Vishal

Hi
check MB5B
give material and plant there
select valuates stock radio button and NON-Hierarchical representation layout on selection screen
give last three month duration period on selection screen and execute report
and see total Goods receipt and total goods issue for material
Regards
kailas ugale

I cannot load Maverick on my iMac HD. It reports that my HD is used for Time Machine backups and will not load to that drive. I do not use this drive for backups. Help.

I cannot load Maverick on my iMac HD. It reports that my HD is used for Time Machine backups and will not load to that drive. I do not use this drive for backups. I use an external 1 TB WD My Book for backups as well as Super Duper Backups. Can anyone offer advice. Thanks.

Welcome to Apple Support Communities
You have got the "Backups.backupdb" folder in the root level of your hard drive. This is the folder used by Time Machine to save backups to, and the OS X Mavericks installer thought that your hard drive is being used to store Time Machine backups
To fix this, open a Finder window, select the Go menu (on the menu bar) > Go to Folder, and type:
Then, delete "Backups.backupdb" and empty the Trash. Finally, open the Mavericks installer from the Applications folder and follow the steps

Any standard report to list material codes not used in a given period?

Is any way (std report or) to find the list of material which are not used(means they r nt involved in sales,planning ,production or purchase) for a given period?
Thanks
Varun papneja

Hi Varun
The list of mateirals that are not consumed in a number of days can be viewed by t.code MC46. I hope this will solve ur problem
Chandra

Discoverer Does not uses partitions while running report

Hello All,
I am noticing a strange thing in Discoverer 9i desktop and i.e
I have my table partition based on Trx date and when I am using trx date as a parameter in my report why it is doing full scans for all the partition across the table...?
Because of this even a reports for single day takes hours..
Any help will be higly appreciated.....

Hello Rob,
Below information has really help me a lot.It made to look at probable cause..And it was Really funny one.
The report was using a parameter as Trx Date and range partition at back end was on another date field. :).
I just joined a comp week ago and was wondering why a report for single date take 2-3 hr to execute....And I was not sure of this discoverer version...
Thanks again for help....
Devang Shah

Some Crystal Reports are not using the Cache Server

Hi...we are currently running BOE XI R2 SP2. I setup a server group with a Cache Server and a Page Server. In the CMC, I set this cache server to keep reports cached for 15 minutes. On the Process tab of some reports, I specifically set the report to use this new server group. On some of the reports this works as expected. For others, it does not appear to be since the cache folder's Date Modified date does not change. So far the only similarity between the reports that do not use cache is that these reports have sub-reports. Has anyone experienced this before? If so, how did you resolve it?
Thanks!

Hi Rich,
the connectivity on the Designer an don the BusinessObjects system is identical. Is region the only characteristic being used in the report ? which connectivity did you use in Crystal Reports ?
ingo

ABAP Webdynpro reports in portal do not use portal theme for some elements

Hi,
I have an ABAP webdynpro screen which uses, amongst other things, a date navigator and drop down lists. All aspects of the portal theme seem to be picked up by the webdynpro except the date navigator and drop down lists. They don't even use the SAP standard ones. They display as plain text using TimesNewRoman font and not the ones specified in the theme. They also do not use any of the colours in the theme. All tables and fields etc are all themed ok. Any ideas how I can fix this?
Regards
Cindy

Could there be a lockal cache issue?
Clear you browser cache via Tools > Internet Options > Delete History
Try again after clearing the cache, if that doesn't help then try downloading the Internet Explorer Developer Toolbar:
http://www.microsoft.com/downloadS/details.aspx?familyid=E59C3964-672D-4511-BB3E-2D5E1DB91038&displaylang=en
...use this tool to get details about the css and classes aplied to the objects and use it to open a OSS message if it is a SAP WebDynpro application of talk to your developers if it is a Custom WebDynpro app.
Good Luck,
Benjamin Houttuin

Z-reports not used...

Similar Messages

Maybe you are looking for