Z search field in standard sap program

Hi,
I would like to ask if Z search field can be created in the standard SAP program.
Basically I need modify the search field used when searching for Business area in creation of asset master data (tr. AS01).
It shows the list of table tgsbt. But I would like to exclude by default some rows of the table and also would like to sort it in different way (by text).
Is that possible, if so, could anyone give me a hint how to do that?
Many thanks,
Honza

Hi Jan,
Please go thorugh the below link.
http://wiki.sdn.sap.com/wiki/display/Snippets/ImplementingSearchHelp+Exits

Similar Messages

How to change standard SAP program SAPLFSKB to add custom fields...?

Hi Gurus,
I have to change the standard SAP program SAPLFSKB screen 100 to add custom fields...i looked into OSS notes and there is a note: 174413 that provides steps to add custom fields...but when i try to do this it doesnt let me do it...it says that request cannot be changed....do i have to use modification agent...if that is the case then how shud i proceed with this....so please provide me some inputs....
your help will be appreciated...
Any inputs for me....
cheers:sam
Message was edited by:
Sam williams

try going into edit->enhancement operations->create. this will allow up to add your customized field.

How to change the field length in standard sap program.

Hi All,
How to change the field length in standard sap program.
Urgent
Example:
Text1 type c length 75,
To change :
Text1 type c length 150,
Point will be rewarded..
Thank you,
Vikram.C

If the only solution is to change the sap standard program, simply change the program, it will prompt for an access key. This key can be retrieved in the SAP support portal (service.sap.com) at keys and requests, sccr keys, register object.
Sometimes these actions are outsourced to a competence center, so maybe youre not entitled to do this, in any case ask a resident senior developer for support.
regards, Rob

Info. / Doc. on Changes to Standard SAP Program, Tables, Fields in SAP 6.0

We are in the process of upgrading our SAP from 4.6c to 6.0 and I am looking for a document or white paper that summarizes changes to Standard SAP Programs, Tables/Fields, Function Modules etc.. from what used to be in SAP 4.6c to what it is in SAP 6.0. I am not sure if such a comprehensive document exists or is posted in the forum.
Any help or information in this regard will be highly appreciated.
Thanks
ram

Hi Ram,
<< We are in the process of doing our technical upgrade from SAP 4.6c to 6.0. I am looking for a white paper or documentation listing the changes made to the standard SAP Programs, Tables, Fields, Function Modules etc. from Rel. 4.6c to 6.0. >>
Do you want to know what custom changes were done to SAP standard objects in your system or do you want to know what changes SAP did from 4.6c to ECC6.0.
There is no white paper or documentation to find out custom changes made to SAP standard objects. but there were many tools in the market to find out and tell what changes were done to sap standard objects in your system.
Your question seems ambiguous please clear it.
Thanks,
Kiran.

Adding field in standard SAP transaction output results.

Hi,
I have to add a new field in standard SAP transaction output results.
Can any one tell me what are the ways (brief explanation) that I can do this?
If using exists - then what kind of exists I have to use? And how to find out the possibility with user exists?
Thanks for your time.
Thanks.
Chris.

Hi,
There are so many ways to find out the user exits.
Hi,
To see SAP Exits -> Use Tcode SMOD
To See create a project for Customer Exits -> Use Tcode CMOD
There are projects to which Exits are assigned. Selects the relevant projects.
What is User Exit:
http://www.sap-img.com/abap/what-is-user-exits.htm
How to find then:
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
All Exits List:
http://www.easymarketplace.de/userexit.php
Do a search on SAP Exits, Customer Exits, enhancements, etc
Step 1 :- Execute transaction
step 2 :- Click on Status Menu
step 3 :- Double click on the program (screen) __?????___
Step 4 :- Search source code for the 'Customer-Function' string using the find button. Remember to select 'In main program'.
Step 5 :- A list of search results should be displayed indicating where all function exits can be found.
You can now double click on each of them to go to its position in the source code. This also
allows for the insertion of breakpoints so that you can test if the exits are called in the
appropriate place.
Step 6 :-Once you have found the Function Exit within the source code (Find Function Exit) you need to
access the actual function module it executes. This is done using the following steps:
Step 6.1 :-
Step 1
Locate desired 'Call Customer-function' statement within source code.
Step 2
If code is not within main program (module pool) e.g. SAP* then you will need to find this
out by selecting 'Main Program' from the 'GOTO' menu. The Main program for transaction
Step 3
The actual function module name can now be calculated based on the information retrieved,
it is defined by the following format:
EXIT_<Program name>_<Exit number>
eg :- 'EXIT_SAPLMR1M_004'.
Step 7.1:-
Once you have found the Exit function module
Step 1
Execute transaction CMOD
Step 2
Select 'SAP Enhancements' from the 'Utilities' menu.
Step 3
Select 'All selections' from the 'Edit' menu.
Step 4
Now populate the Component name field with the exit function module and press
the execute button.
Step 5
A list of all Exits(Enhancements) containing that function module should now be displayed.
Step 5
You can now double click on the desired exit to display a detailed description of its uses and a list of all
components contained in it.
Implementing Function Exit
This is required in-order to activate Function exit:
Step 1
The first step is to enter source code into function module in the usual way i.e. via SE37.
There will already be an include declaration within the code with the following
format: Include zx*.
Double click on this to create it, source code can then be entered within here.
Although it is good practice to create another include with this to store your
code, this allows separation of difference enhancements allowing them to be easlity
removed without de-activating the enhancement.
Step 2
Execute transaction CMOD and create new Enhancement. Enter name and press the create
Button.
Step 3
The following screen should be displayed, enter short text then click on the 'Enhancement
Step 4
Now enter the Exit name (enhancement) which contains the desired Function Exit.
Step 5
Return to initial screen of CMOD and press the activate icon. The exit is now ready for use.
Please Mark The Helfull Answers & close the thread.
regards
dj
reward for all useful answers.

How to add new customise field in standard SAP ME28 Report?

Hi Anybody,
How to add new customise field inside Standard SAP Screen report ME28?.
Anybody, Please tell me how to do?.
Thanks,
Regards,
S.Muthu.

Hi Subramaniyam,
You can find enhancement in me28 by following steps and then apply your logic in include of this enhancement.
cmod>Give a project name>in enhancement column give the package name ME >f4>in package write ME-->ENTER>It will show you all enhancements available in me28> find which ever suits your requirement>save > click on components> from there you can make changes in include program.to add that particular field.

How to uncomment code in Standard SAP Programs

Hi Experts,
how to uncomment entire code of standard SAP programs which is commented .
Standard SAP Program is fully commented,i have to uncomment it ,to work it as normal.
i saw that some lines * / * like this are there in the commented code .
what is the way to un comment this ?
Thanks in advance,
Regards,
Hitu

Well, if it is commented by your company - This doesnt ask for access key but if it is commented by SAP and you want to uncomment, you need access key.
You can ask basis guys to get access key for the object. you need to provide the program name and other information.
Other information: - go to the GOTO on application tool bar and select object direct entry.... you need to provide the full object key.
To uncomment the code - select the lines and right click - uncomment . This can only be done in editable mode.

How to enter values in the fields of standard SAP Infotype e.g. IT0024

Hi,
How to enter values in the fields of standard SAP Infotype?
e.g. I want to enter values in infotype IT0024(Qualifications) in the field AUSPR(Profincy):-
1-Level 1
2-Level 2
3-Level 3
4-Level 4
5-Level 5
Thanks,
Ameet

Hi Divya,
I checked with the screen and report which is mentioned by you. But I want to modify/make changes that should appear in the screen when you view details for a particualar employee in Qualifications(IT0024).
Please refer the screen 2000 of module pool MP002400 in SE80. In that screen I want to make change as listbox with key.
Can it be achieved in the same way as mentioned by you before by making standard SAP report as Z and then modify using layout editor?
Please help me out. I think I am almost there.
Thanks,
Ameet

How to search for a standard sap error message

Hi all,
    I want to know where exactly we need to search for a standard sap error message ( For example like STACK_NO_ROLL_MEMORY).
    I am searching the same in sap market place/oss note search...but don't see what I am looking for ...
   Could you please help on the same ?
Thanks,

Hi Shravan,
Normally system throws up an error when it reaches the threshold point. Normally the threshold / critical points are arrived at by considering the SAP recommended values and what is the sytem configuration you have got.
In true project scenario because of budget constraints we might not be able to have ideal system configuration which SAP recommends , in that case we have to tune to the system perform at an optimum level considering various aspects
In yr case memory parameters should have been set at level , but for yr job it needed more memory which it could not allocate and throwed an error.
hope i have answered yr question .
Regards
Balaji

How to pass variable value to field of standard sap transaction.

Hi Experts,
i want to pass the value of variable to field of standard sap transaction. but that field is not having the parameter ID. so please tell me how i pass the value to field.
thanks in advance.

You might like to provide a few more details of which field and transaction you are trying to interact with... typical solutions involve user exits / BAdIs / Enhancements, or transaction variants, or building a BDC to part fill the screens of the Tcode you are calling.
Jonathan

Changing the text of Text field in standard SAP transaction.

Hi expert,
I have a requirement in which i have to change the text of Text field in standard SAP transaction.
Is it possible? If so, how?
Any pointers will be highly appreciated.

Hi,
I think you want to change the field label of the text field.
For ex in tcode MM01, you can change the field label of Material text field.
The description of the field label comes from the data element it is associated with. To change the text of the field label, you have to change the field label of the data element.
But it will effect all the fields associated with this data element.
To change the field label of the data element go to tcode CMOD. Then click on GOTO->TEXT ELEMENTS->KEYWORDS->CHANGE.
Then enter the data element which is to be changed. In the next screen, change the field label and save it.
Regards,
Vinod

Changes in standard SAP programs

Hello all,
How could I track the changes made to standard SAP programs by a client? The system is 4.0B and some standard R/3 application's source code has been modified to provide some non-standard functionalities (that was, probably, the worst solution - in many of the cases they could have use user exits or enhancements for achieving the same purpose).
In the table TRDIR (or, if you will, D010SINF) I can find the programs that were created by a set of users such as 'SAP' or 'SAP*' or 'DDIC' and were subsequently modified by client users (developers).
Furthermore, finding the development class of those programs (function module 'RS_PROGRAM_GET_DEVCLASS') gives me a better idea about what applications were really modified by the client.
Still, many of these programs that appear to have been created by 'SAP' or 'SAP*' and modified by other (client) users were generated as a consequence of configuration changes made by those client users, and therefore are not changes made to SAP R/3 standard.
Is there a way to track only those standard programs that were indeed modified by the client, at source code level?
Thank you,
Bogdan

Hi Bogdan,
you can program your own tool-abap:
1) select table E070 ( TRFUNCTION = 'R' )
2) -> for all entries select V_E071EU
(TRKORR = e070-TRKORR)
3)-> list all found objects:
-V_E071EU-PGMID
-V_E071EU-OBJECT
-V_E071EU-OBJ_NAME
and create an interactive list (e.g. for SE11 and SE38)
hope this helps
Andreas

FTP option in standard SAP programs

Hi,
Do standard SAP programs provide FTP option and if yes, is selection screen the only option of finding the FTP option.
Regards,
Vijay

I don't get your requirement - pls post more details
A.

To disable one field of standard sap screen.

Hi,
I want to disable one field of standard SAP screen for example
tran code : MD61
Field : Version.
Can Anybody suggest me with simple coding.
thanks
naresh

Naresh,
I guess this can be done using Transaction Variant SHD0.
Just try to check the links related to transaction variant.
1.go to SHD0
2.give the transaction as MD61
3.Transacation variant as zmd61
4.now press create button
4.Here you will get to see the initial screen on MD61
5.Press enter
6.You will get to see the field attributes in a screen called 'Confirm Screen entries"
7.There you can make a field as required/invisible/ouputonly.
Do check other links available in SDN for more info.
K.Kiran.

How to find CUSTOMER EXIT for a Standard SAP program

How to find CUSTOMER EXIT for a Standard SAP program

Hi
To introduce the techniques of enhancement in standard SAP system. SAP creates customer exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks.
They do not affect standard SAP source code.
When you add new functionality to your SAP System using SAPs exits, you do not alter the source code of standard SAP programs in any way. The code and screens you create are encapsulated as separate objects. These customer objects are linked to standard applications, but exist separately from SAPs standard software package.
They do not affect software updates.
When you add new functionality to your SAP System using SAPs exits, your objects (called customer objects) must adhere to strict naming conventions. When it comes time to upgrade a to a new software release, customer objects names ensure that they will not be affected by any changes or new additions to the standard software package.
Customer exits are not available for all programs and screens found in the SAP System.
Any change made to an SAP object in a customer system is called a modification. Customers usually modify their systems for one of two reasons. Either they make changes to the SAP standard in order to adjust the R/3 System to their specific business needs (actual modifications), or they alter individual SAP objects in order to correct an error (as recommended in an SAP error note).
You should only modify the SAP standard if the modifications you want to make are absolutely necessary for optimizing work flow in your company. Be aware that good background knowledge of application structure and flow are important prerequisites for deciding what kind of modifications to make and how these modifications should be designed.
SAP application programmers create SAP enhancements in transaction SMOD using function module exits, menu exits, and screen exits.
Customers are given a catalog containing an overview of existing SAP enhancements. They can then combine the SAP enhancements they want into an enhancement project using transaction CMOD.
SAP enhancements are made up of component parts. These components include function module exits, menu exits, and screen exits. A specific component may be used only once in a single SAP enhancement (this guarantees the uniqueness of SAP enhancements).
Customer enhancement projects consist of SAP enhancements. Each individual SAP enhancement may be used only once in a single customer enhancement program (this guarantees the uniqueness of a customer project).
SAP application programmers preplan function module exits, menu exits, and screen exits for their applications and combine them to create useful enhancements for the R/3 System.
Customers create their own enhancement projects for their systems using SAP enhancements. You can customize the individual components of an enhancement project by creating your own include programs (for function module exits), texts (for menu exits), and subscreens (for screen exits).

Z search field in standard sap program

Similar Messages

Maybe you are looking for