Z1 - can't detect the SD card

Hello,
I just received a Z1 (6903) with the latest Android OS update (5.0.2) Update 14.5.A.0.270 and It doesn't detect any SD card when I insert them.
I tried 3 different card - 2GB, 8GB and 16GB (micro SD and micro SDHC) - Fat32 and even exFat format but the phone can't detect any of them in Settings - Storage or with a File browser.
In other phones or PC they all work fine, just this phone has the problem.
Any ideas would be highly appreciated.
Thanks!

@razvanst
Try again, if it doesn't work, contact your local Xperia care as it could be a hardware issue.
http://support.sonymobile.com/global-en/contactUs/
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

N9 Can Not Detect the Sim Card

Hi Guys,
I have N9 which was dead due to some reasons, I just gave to Nokia Care and they have reinstalled the software and returned to me.
I insereted my microsim and it didn't detected, they Nokia people used their sim card and that worked. I just bought another new sim card and put it in, it worked let's say 2 hours but now again showing the icon of "No Sim Card". I tried restarting, removing sim and inserting again etc...but till now no Luck.
I am extremely angry as I paid a huge some for this device and it didn't work for me. I just bought it 2 weeks back.
Any Idea what could be the problem, I am going to sue the mfs if they are not going to give me a new device or money back.
Thanks.

If it stops recognizing the sim card after a while it could be due to wear and tear, but since it's new and you have tried a new sim card I would say it's obvious that there is a hardware fault with the device. Could be the contacts reading the sim card.
Get it replaced or take it back for repair. They should be helpful fixing this.
Hope you get it sorted and you become a happy camper as I am - so far

Wre54g v1 can not detect the wireless card

when I start the setup it shows me this error and I cannot continue the setup...I have win 7....I have tried to configure it manually but I have failed...how can I do to solve this error?

You can follow this link and it will help you configuring your expander manually, without the setup disk.

KT4 Ultra, I can install or detect the Sound Card.

I have a KY4 Ultra, model MS-6590 (v1.X), G52-M6590X6.
I can install, or detect the sound card. In the manual I found an option to enable or disable the Audio Controller, but in my MOBO, I can´t find this option.
The Windows 98SE can detect the Multimedia Card, and I tried to install manually with the "Drivers CD", but in the begining of the instalation, appears a message saying that there can detect the Sound Card.
What can be that ?

Quote
Originally posted by maesus
Do you mean in your MOBO as in hardware? The option to enable/disable the audio controller is inside the BIOS settings. Press DEL when you see the POST screen should lead you to the BIOS settings.
Where in the BIOS? I certianly cannot find it on my 6590 v4.0 board.

DVD-Audio and "can not detect sound blaster card" with Audigy2 Va

I recently purchased an "Audigy2 Value" card from an eBay user, because I recently purchased some DVD-Audio discs. I downloaded the Audigy2 drivers from the website, and the Creative MediaSource player. 5. Surround sound worked fine for me, though sometimes the driver would reset to the default 2/2. sound and I would have to re-select 5. sound, which was annoying.
Then I was completely unable to get the MediaSource player to recognise my DVD-Audio discs, and the EAX functionality of the player would never work. The EAX logo never appeared in the player. When I tried installing the MediaSource player from an install disc, I got the message "can not detect sound blaster card". Then I discovered the world of EEPROM problems.
I followed advice from some other threads, including using ScanPCI to get information on the card, which yielded the following result.
When installed on my machine (Asus A7A266 motherboard) the ScanPCI reads:
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0005h (I/O Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h Unknown
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 0000A800h
System IRQ 5, INT# A
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
On another machine (specs unknown, it's a "house pc") I got this (with 3 entries!):
Vendor 02h Creative Labs
Device 0002h EMU0K Audio Chipset (SB Li've!)
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 04h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 002002h CT4850 SBLi've! Value
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00009000h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 7002h PCI Gameport Joystick
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 0h, Header Type 80h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Input, type Other
Subsystem ID 002002h PCI Gameport Joystick
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008800h
New Capabilities List Information :
Power Management Capabilities
Current Power State : D0 (Device fully-operational, no power saving)
Vendor 02h Creative Labs
Device 0008h Unknown
Command 0004h (BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing)
Revision 00h, Header Type 00h, Bus Latency 20h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 0002h PCI Gameport Joystick (Guess Only!)
Subsystem Vendor 02h Creative Labs
Address 0 is an I/O Port : 00008400h
New Capabilities List Information :
Power Management Capabilities
Supports power state D2
Supports power state D
Current Power State : D0 (Device fully-operational, no power saving)
(Just a note: above you can clearly see that it does not say I have an Audigy, it thinks it is a SBLi've. Is this normal? The card IS an Audigy 2, it says so on the card.)
So, I put the card back on my own PC, thinking this has fixed my EEPROM, but I get the same as before. Subsystem ID 0002h. And of course the install software will not detect the card.
I realise that I could go back to using the web drivers, but this still leaves me with MediaSource not recognising the card and not enabling DVD-Audio or EAX, which is why I bought the card in the first place!
I have heard that the VIA chipset is possibly to blame for the EEPROM problems on the Audigy cards, and certainly it seems like it is not permanent, since it gave different information on the other PC. So now I am seriously considering getting a new motherboard.
Do other motherboards cause this same problem? I don't want to buy another board and get the same trouble. All I want is to be able to install my MediaSource and have it recognise my card so I can listen to my DVD-Audio discs.
Cheers,
Russ.

Figured out my problem. Installing the drivers from the web to begin with was a bad idea. They just did not work properly with the card.
The "card not found" problem has gone as well, after installing it in another PC. I am also using the proper install disc now, as the other one I was using turned out to not be for the Audigy 2 value after all, but was an Audigy 2 install disc. That easily explains the "Card not found" error. The differing results from the ScanPCI program are still bizarre, though.
Thanks to all of the people on the forum who posted information in other threads to help me deal with this issue. For now I am sticking with the original drivers from the disc and I am not upgrading.

Vista can not detect my graphic card ATI HD2600 on Satellite A210-128

Hallo,
Can someone help me with this issue?
I have a Toshiba Satellite A210-128 laptop with vista separately on DVD, but it seems that the dvd is damaged and I can not use it any more.
I have installed on my laptop a brand new Vista from the original DVD that Im using it on my desktop, but the problem is that vista can not detect my graphic card hd2600.
So Im stuck...... I tried to install the ati driver from the Toshiba update site but I get a error because ccc can not detect a graphic card ?????/
What to do????
It is something special with the DVD that i have from Toshiba ?????
Thank you very much.

Hi
> I have installed on my laptop a brand new Vista from the original DVD that Im using it on my desktop, but the problem is that vista can not detect my graphic card hd2600.
So Im stuck...... I tried to install the ati driver from the Toshiba update site but I get a error because ccc can not detect a graphic card ?????/
The whole issue is really mysterious. In my opinion there are two options;
Either your have used and tried to install a wrong graphic driver or there is something wrong with your GPU chip.
Are you 100% that you tired an right graphic driver from the Toshiba European driver page?
If yes, then I recommend contacting the ASP in your country because this could be really an hardware issue.
Furthermore I found you second posting in other thread
http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=142621#142621
and I think more and more that this must be an graphic card issue.

I recently updated the itunes software and now my iphone wont detect the sim card! what do i do?

I recently got my iphone unlocked because i wanted to change my carrier. today when i connected my iphone to the itunes it started updating the software! all my previous data was erased and now it wont detect the sim card! what do i do?

Updating iTunes has nothing to do with an iDevice going into recovery mode.
If the device is in recovery mode, restore it via iTunes on a computer.

Can not access the media card files Blackberry 8310 - HELP

Can not access the media card files Blackberry 8310.
I had a battery drain problem. The unit would only last 16 hours before completely drained. Purchased a new battery with the same result. I figured that I should try a complete reset so I did a hard wipe. Once that was done and I loaded the unit back up and returned online, the battery drain problem was resolved but now I can not access the media card.
Here are the messages:
“A media card has been inserted that contains encrypted content which will be unaccessible by this device”
I can see the files. I have transferred them to my PC via the SD card but I can not open them. Here are the settings:
Media card support – ON
Encryption Mode: - Security Password & Device
Encrypt Media Files – YES
Mass Storage Mode Support – OFF
Please note – I can not change the encryption mode since it is set by policy
Security Options – General Settings – Content Protection – Disabled
The version of Desktop Manage I am using is 4.2.1.8. When I try to use the Media Manager to move the files, I get an error message and can’t move the file. If I access the file on the card and try to display it, I get:
Unable to display file /media card/ pictures/ing000000xx.jpg.rem
Here is what I have tried (from the advice on this board):
1)     Read the files directly off the media card – No good
2)     Create a “new” folder on the media card and move a file into it then try to read it – No good
3)     Email the file then read it – No good
4)     Reset Encryption mode to off then try – Can’t do it – IT Policy setting
5)     Be sure that the password was set the same as before the wipe (setting is password & device) – Can’t do it – The Blackberry prevents me from using an old password.
So I think I can’t read the files because I can’t replicate the encryption key. Could that be right? My problem is that I do not understand why this would be the case. It is still the same device and since it knows what the old password was (because it would prevent me from using it again), why would it not generate a key to access the files?
All I am trying to get off the card are pictures on my 6 year old … some are priceless. Can someone help me do this? One would think that this should not be this hard but from all the postings I have found, it seems that it is. And yes, shame on me for not moving the files before I did the reset (THAT will never happen again!) but this being unrecoverable is unconscionable given how many seem to find themselves in this situation.
Thanks for any help you can offer!

Not sure why you couldn't see them using mass storage mode. Did you have the pics stored on your media card? Try going to media-menu-explore-media card-blackberry-pictures See what the extension is on your pics. If any have the extension such as .jpg.rem they are encrypted.
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

How can i disable the credit card from that stolen acc and register to my new account

Hello everywone i have a big problem.. Somewone stole my apple id and changed everything (email , secret question). In that account was my credit card registered. how can i disable the credit card from that stolen acc and register to my new account ?? thanks for help

Is it an IMAP or POP account?
For POP accounts, you can select remove from server under the advanced tab of the account.
Apple support article with information on receiving a message more than once:
Mail Problems

I have always paid for apps with a credit card and now need to use an app store card but I can't get past the point where it keeps wanting my credit card updated. And can't used the app card number. Any advice???

I have always paid for apps with a credit card and now need to use an app store card but I can't get past the point where it keeps wanting my credit card updated. And can't used the app card number. Any advice???

I do NOT like using my credit card if I don't have to, and I went out of my way to go buy an Apple gift card, which I successfully redeemed into my Apple account. However, when I use the Apple "Cards" app, it will not let me use anything other than my credit card. I tried purchasing a card, hopefulling it would come out of my Apple store balance, but no such luck -- it came out of my credit card.
Apple is becoming more like Microsoft every day.

Can you put the sim card in without the tray on the iPhone 3GS?

Can you put the sim card in without the tray on the iPhone 3GS?
I don't have the tray, I have ordered a new one but would like to still use my iphone for the next few weeks

Don't....wait until you get a tray...never a good idea to rig something up

I want to upgrade my iPhone 3G to a used iPhone 4, can I use the sim card already in the 4 or must purchase a new sim card?

I want to upgrade my iPhone 3G to a used iPhone 4, can I use the sim card already in the 4 or must purchase a new sim card?

You might want to ask you carrier that question. I can tell you that when I gave my old iPhone 4 to my wife we were able to get my old sim card that was in the 4 reprogrammed with the wife's phone number. The AT&T store didn't charge us to do this.

I ordered my iPhone 5s in online and already received it. but there was supposed to be a $ 50 gift card with this, i haven't received it. how can i get the gift card?

I ordered my iPhone 5s in online and already received it. but there was supposed to be a $ 50 gift card with this, i haven't received it. how can i get the gift card?

Contact whomever you ordered the device from.
No one in these user to user support forums can assist with such issues.

Actually i have a apple account without credit card in usa i have just got a itunes gift card from an application so can i redeeme the gift card without credit card????

actually i have a apple account without credit card in usa i have just got a itunes gift card from an application so can i redeeme the gift card without credit card????

Yes you can redeem the card if it is a U.S. gift card, you have a U.S. based iTunes account and if you are using the U.S. stores on the iPad.
On the iPad - Swipe to the bottom of the screen in the App Store or in iTunes and tap on Redeem. If you are using iTunes on your computer, you should see Redeem under Quick Links (i think that is where you will see it) after you sign into the store.

HT201304 How can I change the account card on file to a different card?

How can I change the account card on file to a different card?

HT1918 iTunes Store: Changing account information
Learn how to change your name, billing address, email address, and credit card information for your iTunes Store account.
Note: If your previous payment method was not accepted, you can edit your payment type or credit card information by following the steps in this article.
You can change all of your account information from the Apple Account Information page. To get to the Apple Account Information page, follow these instructions:
Changing your account information using a computer:
Open iTunes.
Choose Store > Sign In.
Enter your Apple ID and password, then click the Sign In button.
Choose Store > View My Account.
Enter your account password, and click the View Account button.
To update your email address, follow these instructions:
From the Apple Account Information page, click the Edit button to the right of your Apple ID.
Enter your new email address into the Email Address field.
Click the Done button.
To update your name, billing address, or payment information, follow these instructions:
From the Apple Account Information page, click the Edit Payment Information button.
Edit the information that you would like to change. Note: The payment methods that the iTunes Store accepts can be found in the payment type section. If you do not want a payment method on your account, select None in the payment type section.
Click the Done button once you've updated all of your information.
Changing your account information using an iOS device:
Tap Settings on the Home screen.
Tap iTunes & App Stores.
Tap on your Apple ID. (If you are not signed in, enter your Apple ID and password, and tap Sign In.)
Tap View Apple ID.
Enter your Apple ID password.
To update your email address, follow these instructions:
In the Edit section, tap the Apple ID field.
Tap the Apple ID field.
Enter the email address that you would like to be your Apple ID.
Tap the Done button.
To update your name, billing address, or payment information, follow these instructions:
In the Edit section, tap Payment Information.
Update the information that you want to change.
Tap the Done button when finished.
Additional Information Notes
If you use an AOL screen name to sign in to the iTunes Store, editing your information on the Apple Account Information page will not carry over to your AOL account. If you need to update your AOL account information, contact AOL.
If your account information does not match your credit card, you may get a message stating "The credit card was declined."
When you update your credit card number or billing address through the iTunes Store, any equivalent information you might use with iCloud, Apple Store online, iPhoto, or Aperture is also updated.
The iTunes Store will place a minimal authorization hold on your credit card each time that you update your account information (equal to around 1 USD). The authorization hold is not a charge. The authorization hold is placed on your credit card to make sure that the information provided matches the information on file with your financial institution. The authorization hold will not be displayed in your iTunes Store purchase history.
Important: Information about products not manufactured by Apple is provided for information purposes only and does not constitute Apple’s recommendation or endorsement. Please contact the vendor for additional information.
Last Modified: Sep 24, 2012

Z1 - can't detect the SD card

Similar Messages

Maybe you are looking for