Z1 compact camera 'image not saved'
I decided to test out my brand new camera with my Z1 compact, I was in love with the phone. I noticed that it started to freeze every now and again and I decided just to lock and unlock, not a problem however now it has stopped freezing and instead it states that it cannot save the phot on most photos? Anyone else have this or should I send back to carphone warehouse?
Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
Have you checked so you have the latest software on your phone? In the latest software, the camera experience has been updated and improved:
http://support.sonymobile.com/global-en/xperiaz1compact/software/
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.
Similar Messages
-
my camera roll not saving any pics at all. I can take pics from the Phone when it comes to see the pics in camera roll its not going or saving there. Any sololution reply me here plz. thanks
Well, I would try restoring it as a new iPhone rather than from a backup (as the backup could contain the issue) and if that does not solve the problem, then I suggest you take it to a Genius Bar for evaluation.
Before you do that, make sure you have your data synced to iCloud or iTunes so that you can get it back afterwards by redownloading and syncing, rather than from a backup. -
I've an Image Field, where user is required to choose an image.
I deployed and ran the project. When I click over the blank image field - "Select Image File" dialog box appears. I selected an image and it shows up on the form.
I saved the form, but when I opened it back, there was no image :-(.
I've tried binding the Image Field to Context attribute of type "binary". But that did not help either.
How can I save the image chosen by the user?
Thank you,
VimuktaThanks Poojith.
Your suggestion put me on the right track.
I created a context attribute of type string (for the URL) and tied it to the Imagefield.
Initially there is a dummy image. When user uploads his image, that image gets saved .
Awarded you the points.
Thanks for your help.
Regards,
Vimukta -
Pictures taked with Camera are not saved.
When taking pictures using my iPad Air the app functions normally but the pictures are not saved to the iPad. Am I missing a setting somewhere in Settings?
Yes, they are on the "Camera Roll".
When I had iPad (the original) these are saved pictures from various apps (Facebook, Wikipedia, emails, ......)
When I up graded to iPad Air everything transfered over. Thus pictures are stored in "Camera Roll".
This still does not explain why pictures taked on the iPad are not saved anywhere.
Thanks for the response. -
"Updated images not saved" filter
Hi,
I would like an option to search images that has been updated but not saved. I dont write automatically and to be sure I save all images. But if I cluld filter it out it would be better.
- TerjeTerje,
As a workaround, you can go to your top-most folder and use the filter bar to sort by Edit Time. This will put the images most recently edited at the top and make it easier to just select those with the "needs updating" icon.
As a side-note, if you select the entire catalog and hit Ctrl-S, my understanding and experience indicates that it only updates those that need updating and quickly skips over the other images. This is what I do now when I want to make sure I have updated all changes. Scanning the entire catalog of say 10,000 images only takes an additional minute or so. You can check by doing a complete catalog update twice in a row, the second time is the scan time with no changes being made.
Jeff -
Motion camera behaviors not saving or exporting correctly
I love this program. For $50 it is amazing.
But, I am having issues.
I have a pretty processor heavy project with two replicators running video and a camera doing zooms, sweeps, etc.
I can set up the project exactly how I want it, Save, Close. When I open it back up tomorrow I have issues with Camera behaviors not completing their cycle. They were flawless when I exited the program and now when I open back up its as if they are missing some of their data and just stop mid-behavior.
Example: when using a "Framing" behavior it will start its zoom out but not finish it.
Seperate issue.
When I export the project as H.264 or ProRes 422 (or any export), Motion is not performing the behaviors as it did previously.
I can RAM preview the project and everything looks just fine on playback. Then I export--when QuickTime opens it and I play it back to check it--the video make it somewhere in the middle and a camera behavior doesn't complete its zoom out. How can the export be different if the RAM preview is fine and I change nothing????
Motion crashes all the time too which is super frustrating. Man it is such a great piece of software though.....Anyone encounter & resolve this issue?
Framing behaviors align perfectly on their targets during playback and RAM renders in the canvas, but are consistently misaligned in any "Share" renders. I've tried it with "Export..." and various "Apple Devices..." settings. Incidentally, those do seem to work up until there are a few Framing behaviors on the same camera, (none of them overlap-- if / when they do conflict, the canvas preview is appropriately affected.) I can't work out which action causes the failure, but it will eventually happen in the canvas, too, if I work on the project long enough! Then the only recourse seems to be deleting the Framing behavior. Simply resetting its parameters does NOT correct the weird alignment. Subsequent targets are not framed correctly. -
Trying to move avi files from iPad - already deleted from my camera so not saved anywhere else
HI
i stupidly imported movies from my camera directly onto my iPad and then deleted them from my camera. So now the AVI files are on my iPad but I can't view them on the device. And all of the apps I tried seem to use itunes to "locate" the files. This is not an option as I imported them straight to the iPad. iPad wont let me email these files to anywhere as I guess they are just not recognised. Can't access them via iCloud etc. Is there any way I can move these files from my iPad to a usable source?
thanksThey're probably also too big to e-mail. Video files are normally huge and e-mails often have a 10-25 meg per message limit. I have a 3 minute video that's 300 megs.
Have you looked to something like dropbox? Upload them there, download them to your computer? You'll need the dropbox app but it should work.
Also, do you have a PC? have you tried using windows explorer? If the videos are in your camera roll (not sure if they will be since you imported them) all you need to do is plug your iPad into a PC, ignore the open iTunes part and use 'my computer' and windows explorer to gain access to your iPad. Go to 'my computer' see if you can see your ipad, double cllick on it, you'll see a DCIM folder. Inside that will be a myriad of folders created by the iPad. My suggestion would be to just drag everything over then go through it and see if your AVI's are in there. -
I opened my mail program, opened ten emails with four or five images each, and clicked on each image. I clicked Save Image. I went to Photos/Camera Roll and mine of the pics are saved there. Where are they?
I'm used to Windows where I can click Start then search for something. If there is a search this iPad button, I can't find it.You are experiencing the software glitches that this forum suffers from all too often. I have been getting the "missing post syndrome" for several days. I track my discussions via "Your Stuff/Discussions" in the upper right part of the site.
I'm not sure what else to try for the saving images that would not be a PITA, but you could try resetting all settings. You won't lose any data if you do that, but you will have to enter all of your iPad settings again in the settings app.
Settings>General>Reset>Reset all settings. Your privacy settings will be reset but theoretically that could make the save image setting work again.
I hope that the meds help and that the pain subsides soon. -
Like the title says, why when I record a video, it is saved like a photo and not like a video. I mean that if I go in video app, I can't see my video that I just recorded, I have to search in my photos, but this is a video. I don't understand.
ThanksPictures and videos you take on the pad are saved in the camera roll. That's just where they go. If you select it, it should show with a play button to play the video.
If you sync it back to your computer, edit it and change it, then save it as a video, it will sync back to the pad as a video. -
Whenever I save a screenshot or an image from internet it doesn't appear in the photos app. I am also not able to take photos on camera?
It is kind of strange. New iPad and hasn't been thrown around or anything.
Thanks for your help.Try closing the Photos and Camera apps completely and see if they then work properly : from the home screen (i.e. not with the Photos or Camera app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera and Photos apps to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
Camera video not saved after installing 8.02 on iPhone6
Videos were being saved prior to installing the last update.
Video and slow-mo ARE NOT being saved to "Photos App" either in "Collections" or "Albums->Videos" after the update.
Photos are being saved.
I tried a "Home/Power Button" reset and a full reset in setting (erase all content and settings) followed by restoring from backup.
Still broken!
Why else can I try?Product updates
-
Changes to button images not saved
I have dragged still images to some of the buttons on my scene menus, 'saving' each time.
Intermittently when reopening the project in iDVD the still images have been replaced by auto fill images from the movie clips associtated with the buttons.
Has anyone else had this problem and is there a work-around?
eMac G4 1.42GHz 160GB 768MB RAM Mac OS X (10.4.8) La Cie d2 320GB Firewire driveI noticed now that if a project is amended in iMovieHD, subsequently iDVD will ask whether you want the update it in iDVD. If yes is selected, then it is necessary to go back and review/change the scene menu photos.
-
Camera Keyframes not saved correctly in Motion.
Hey,
I'm currently working on a project in motion with a complex camera-movement which I have created using keyframes. However, every time I close Motion and open the project up again, the bezier curves have all disappeared - leaving very jagged edges. I have absolutely no idea why the keyframes won't save correctly - I'm locking the camera track but nothing with work... any ideas please?!I've actually discovered that the bezier information is only erased if the camera track is locked - if it is left unlocked all the data remains unchanged. Is there any reason for this??
-
Https websites image not saved in top sites
OS 10.5.8 with all updates
Safari 4.0.5
Stopped working a few weeks, I do not know exactly when
Already tried to start again with a fully fresh reinstalled safari
Example: https://www.creditmutuel.fr/cmidf/fr/
Bug? Something wrong in my own configuration?
Thanks
ThierryHI,
From the Safari Menu Bar, click Safari / Empty Cache. When you are done with that...
From the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset.
Make sure Safari is not running in Rosetta. Right or control click the Safari icon in your Applications folder then click Get Info. In the Get Info window click the black disclosure triangle so it faces down. Where you see Open using Rosetta... make sure that is NOT selected.
Safari 4 how-to: Top Sites Browser in a nutshell
If nothing above helps, go to the Safari Menu Bar, click Safari/Preferences. Make note of all the preferences under each tab. Quit Safari. Now go to ~/Library/Preferences and move this file com.apple.safari.plist to the Desktop. Relaunch Safari.
Carolyn -
Hi, recently updated my n79 and now it will not save any pictures that I take (at least not that I can find). Has anyone any idea what is happening? The camera etc work as normal, but when you go to view the pictures you have taken they are nowhere to be found
Solved!
Go to Solution.So are they there or not? You ended your sentence with a "?"
If you don't see them then your camera is not saving them. If you see them then your camera is saving them but for some reason they are showing in your photo browser.
Maybe you are looking for
-
I can not print a report from my quicken program because the printer name has the word on in it
I recently purchased and installed a HP Officejet Mobile L411 printer. For all apps. on my computer (Window&) the printer name is as follows: HP officiate Noble L411. On my Quicken program the printer name is as follows: HP Officejet Mobile L411 on U
-
Hi. How come iTunes keeps saying:"this iPod can not be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64 bit version of iTunes?" Wth...i am using the 64 bit version of itunes. Why doe
-
Mac Pro Late 2013 or iMac Late 2013 for photo editing?
Hi, I am currently running with a Late 2009 iMac (i7, 2.8 GHz, 16GB RAM, 256GB SSD) and I am mainly doing RAW post-processing with Lightroom and some steps (auto-stitching panoramas, more complicated layered editing/sharpening/re-coloring) in Photosh
-
Pixma ip4600 cd issues on Mac OS X
The Pixma Ip4600 is not printing to cd/ disk; printer only prints test page on A4; downloaded latest drivers for the Mac OS 10 X Mavericks and still has same problem. Please help?
-
Hey everyone, I just purchased a 2nd hand mainboard (MSI KT3 Ultra Series, MS-6380E v1.X) but unfortunately I cannot install the chipset drivers from the cd as I do not have the series number required. So I downloaded the 4 in 1 VIA download from MSI