Z1 Data not being uploaded to Aggregates operation report(AOR)

Hi,
Iam facing one issue.The downtime entered into the Z1 Notification should upload into the AOR (Aggregate Operations Report).  The downtimes entered in Z1’s for the secondary plant have been transferred to the AOR downtime section, but the downtime entered in  Z1's for the Upper plant, have not transferred to the Aggregates operation report downtine section.
  The report runs based in Multiporovider.
Please help me out in this issue.
Regards,
Sindhu

Hi,
thanks for ur response. ihave checked transfer rules and update rules.Could u tel me how can i proceed further to find out why the downtime is not transferred to the report.
Regards,
sindhu

Similar Messages

  • Master Data not being uploaded to Info Object

    Hi all,
    I'm trying to upload some master data  in to an Info Object with attributes. When I trigger the DTP, the status gets stuck to Yellow and the data is not being uploaded. There are no errors being shown.
    The data has reached PSA perfectly. My data source is a flat file.
    Anyone have any ideas?
    Please help
    Thanks

    Hi,
    There could be various reasons for this. I would have gone through checking it this way.
    Activity set 1:
    1) Check in SM50 if there is any activity happening.
    2) Check in SM37 for any cancelled jobs.
    3) Check in SM21 for error logs.
    Activity set 2:
    1) Cancel the current request.
    2) Ensure my transformation (b/w datasource and InfoObject) is active.
    3) Try to reduce the data package size and try (say to 100)
    4) Run the DTP
    Activity set 3:
    1)  If Activity set 1 and 2 do not help me, I would check by deleting the request in my PSA as well. Take only one record of the flat file which I am sure has no illegal characters and try loading.
    2) If successful, this would mean it could be because of the erroneous record in the complete set (It may be taking some time to show up the error and hence the status is still yellow).
    3) If unsuccessful, this could be because of some objects which are inactive. And I would start from deleting and recreating the DTP.
    Also, do you have any routines in the transformation? If so please recheck the logic.
    Hope it helps!!

  • Data accuracy on the aggregates operations report

    Hi,
    I am facing the issue Please help me in solving this issue.
    when user was reviewing the data for accuracy on the Aggregates Operations Report
    and found some discrepancies.  This is for plant 3001 (Carden) for March.user got the data as
    57,051 from the COIO transaction in SAP and from the Inventory Movement
    report in BW under production receipts, but on the Aggregates Operations
    report for extracted there is only 30,840.  The surge material in question
    is the amount that should show up in extracted tonnes on the AOR report.
    user has tried  running different reports but can't figure out why the
    difference.  Also, the Net Processed Volume and Aggregates processed are
    also incorrect.  The amount Net Process Volume should the total of material
    9050 (6,313 tonnes), 9061 (35,429 tonnes), 9094 (3,045 tonnes), and 9106
    (10,628 tonnes), and for Aggregates Processed will be the same except not
    including 9094.
    Thanks,

    Hi Lalitha,
    From what I could undersand, one SAP report and 2 BW reports are being mentioned in your question.
    The SAP transaction COIO and the Inventory Management report in BW are showing the same value. The AOR report is showing a different value for the plant 3001.
    Please check the following:
    1) How are the key figures (like Net Processed Volume and Aggregates processe ) computed?
    2)  What fields from R/3 are used for this computation?
    The reports within BW are showing a difference, which means the sources and data flow have been taken differently. So just analyze if the design in the back-end i.e. modeling is done based on any functional specifications given by the Business if so that can be your justification.
    If this doesn't help you, you might have to give some more details of your problem.
    All the best!
    Regards
    Sudeepti

  • Email attachments from SSRS email subscription are not being uploaded to an email enabled SharePoint 2013 document library

    Email attachments from SSRS email subscription are not being uploaded to an email enabled SharePoint 2013 document library.
    I have tested the library using a standard email (with attachment) to the library and this works fine. 
    I have monitored the drop folder on the server and I can see both emails being picked up in drop and processed by SharePoint.  The email sent from a regular email account is uploaded with the attachment, whereas the email sent via SSRS subscription
    email is uploaded and the attachment (report) is missing.

    An update on this.  The email when sending from SSRS subscription is received in the library and the attachment is contained within the .EML file uploaded.
    The behaviour that I would like from SSRS subscription emails are to just have the document and not the email.
    Below is a snippet of the .EML files I quick copied from the Drop folder.
    Email attachment snippet sent from SSRS Subscrption:
    ----boundary_2477_75fa3d73-56de-4948-ad82-6588f3a35b95
    Content-Type: application/octet-stream; name="Toilet Usage by Month.docx"
    Content-Transfer-Encoding: base64
    Content-Dis;
     filename="=?utf-8?B?VG9pbGV0IFVzYWdlIGJ5IE1vbnRoLmRvY3g=?="
    Content-ID: <10722c0f-749e-4ecb-ac3f-206317bae734>
    UEsDBBQAAAAIAEVcbEY4Xh4a5nsAAPJtMQARABwAd29yZC9kb2N1bWVudC54bWwgohgA
    KKAUAAAAAAAAAAAAAAAAAAAAAAAAAAAA7N1rr1/XcSforyL4VRooR3vd9to76Kihjto9
    I8T2TDvAzFuaPrE1kUiCouxWPv38DyX50nHSniCdyS96bIAUL+d/LnxO7Vq11qr6j//p
    v3/x+Qe/fnr75WevX/3lD9qfHz/44OnVy9e/+OzVL//yB1+9+9sfXj/44Mt3L1794sXn
    r189/eUPvn768gcf/KeP/uNv/uIXr19+9cXTq3cfPF7h1Zd/8evHH/7q3bs3f/Hhh1++
    /NXTFy++/PPXb55ePf7wb1+//eLFu8cv3/7ywy9evP27r9788OXrL968ePfZzz/7/LN3
    X3/Yj+P8wbcv8/rxXt+++otvX+KHX3z28u3rL1//7bvnN/mL13/7t5+9fPr2p+/e4os/
    5f1+8yaffPshv3+Pj4/l3a++e5Ff/1Pv9tdffP7d3/vNmz/lvf3i7YvfPL6AX3z+zTv6
    Email attachment snippet sent from Outlook:
    --_004_A4C6DCEDE4346446A79AFF493D278530FB87FA07MELABCDEXA1airp_
    Content-Type: application/vnd.openxmlformats-officedocument.wordprocessingml.document;
     name="Toilet Usage by Month.docx"
    Content-Description: Toilet Usage by Month.docx
    Content-Dis; filename="Toilet Usage by Month.docx";
     size=76574; creation-date="Thu, 12 Mar 2015 00:41:14 GMT";
     modification-date="Thu, 12 Mar 2015 00:41:14 GMT"
    Content-Transfer-Encoding: base64
    UEsDBBQAAAAIAMJcbEY4Xh4a5nsAAPJtMQARABwAd29yZC9kb2N1bWVudC54bWwgohgAKKAUAAAA
    AAAAAAAAAAAAAAAAAAAAAAAA7N1rr1/XcSforyL4VRooR3vd9to76Kihjto9I8T2TDvAzFuaPrE1
    kUiCouxWPv38DyX50nHSniCdyS96bIAUL+d/LnxO7Vq11qr6j//pv3/x+Qe/fnr75WevX/3lD9qf
    Hz/44OnVy9e/+OzVL//yB1+9+9sfXj/44Mt3L1794sXnr189/eUPvn768gcf/KeP/uNv/uIXr19+
    9cXTq3cfPF7h1Zd/8evHH/7q3bs3f/Hhh1++/NXTFy++/PPXb55ePf7wb1+//eLFu8cv3/7ywy9e
    vP27r9788OXrL968ePfZzz/7/LN3X3/Yj+P8wbcv8/rxXt+++otvX+KHX3z28u3rL1//7bvnN/mL

  • My contacts from my iphone 4S are not being uploaded and saved to iCloud.

    Why are the contacts that are on my 4S iphone NOT being uploaded and saved to iCloud contacts?  Yes, contacts toggle is turned to "on" on my phone.  Yes, I have updated manually while plugged in and connected to my WiFi as well as left it plugged in and locked to automatically update iCloud.  Still no contacts in my iCloud folder even though I have 379 contacts sitting on my phone.

    I'm no expert by far, but have had issues with this before.
    IMAP should allow your iPhone to remove messages from the server.
    But have you made sure both the iPhone and Outlook are connecting via IMAP?
    If your iPhone does remove the messages from the server, but your computer is using POP, then the computer may download the email before it is removed form the server by your iPhone.
    This was my issue, that my computer had already downloaded the message, and POP does not check later if it is deleted.
    If you delete a message from Outlook does it disappear on the iPhone?
    Alternativly you may need to check the email server settings.
    Who is your email provider?
    They may be able to check if IMAP allows you to remove emails.

  • I am playing a game called temple run on my phone.But my achievements are not being uploaded to my Game Center account.How can i solve this issue?

    I am playing a game called temple run on my phone.But my achievements are not being uploaded to my Game Center account.How can i solve this issue?

    contact the developer?

  • HT1349 I am loading pictures in the photo steam photo but they are not being uploaded to the cloud. I have enabled the pictures on the windows PC but how do I "force" the upload?

    I am loading pictures in the photo stream folder but theya er not being uploaded to the cloud. How do I "force" the upload from the PC to the cloud? I have followed the instructions and enabled the photo stream with the  correct folder on the PC...

    Apply the two fixes below in order as needed:
    Fix #1
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - run Option #4 to rebuild the database followed by Option #1 if necessary.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button and select the library you want to add in the selection window..
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • HT5824 my pictures are not being uploaded to my icloud account?

    my pictures are not being uploaded from my iphone 3g to my icloud account? Why?

    contact the developer?

  • HT203565 contacts on my iPad are not being uploaded to iCloud

    I have synced my iPad with my Yahoo account. It has downloaded all of the contacts located there. However:
    1- The Yahoo sync did NOT include any group information. I.e it downloaded all individual contacts, but none of the groups which existed.
    2- These contacts are visible on my iPad, but they are not being uploaded to iCloud when my iPad syncs with the cloud.
    The original problem is - how do I get the Groups from my  Yahoo account downloaded to the iPad.
    "Obviously" If I could get the Yahoo contacts uploaded to iCloud, I could create the groups there. (Which I can do easily enough), but I cannot get the contacts into t he groups.

    If you're talking about photo stream:
    Check the following:
    From your Home screen, tap Settings > iCloud > Photo Stream, and make sure the slider is set to the ON position.  If grayed out, check Restrictions in Settings>General.
    From the Home screen, tap Settings > Wi-Fi, make sure the slider is set to ON, and that your device is connected to a wireless network.
    Ensure that Camera app is closed on the device where you took the photo. Photo Stream will not upload photos from an iOS device until the Camera app is closed.
    Ensure your iOS device has not fallen below 20% battery power. To preserve battery life, Photo Stream downloading and uploading are disabled when the battery reaches this threshold. Downloading and uploading will resume once you charge your device, and the battery charge is greater than 20%.
    Note that when photo stream is turned on, only pictures taken from that point on will go to the stream, not existing photos.  For those, sync them to a computer using itunes and USB cable.

  • Date not being displayed in the custom format

    Hi ,
      I have a problem wherein i am unable to change the format of the date.
    I need the date to be in the format 'January 10,2010.' however the date is being displayed as '1/10/10'. I have tried all options for the date formatting. I specified the custom format as 'MMMM D,YYYY' as mentioned in the SAP Library. I am trying to use the std custom options like YYYY-MM-DD, the date is not being dispalyed in the custom format provided by SAP either.
    I have binded date from the context, used the Current Date field provided by SAP.  Nothing works.
    Its not working on the new form. However the old forms have the same kind of formatting and are being displayed as desired.
    Please suggest as to what the issue could be.
    Thanks,
    Soumya.

    Hi All,
    Even I'm encountering the same issue. I'm trying to control the outputted date format programmatically.Please have a look.
    data: v_int_date like sy-datum,
            v_ext_date(10).
    v_int_date = '20110201'
    write v_int_date to v_ext_date MM/DD/YYYY.
    Here I've tried to convert the date to external format using a fixed format(MM/DD/YYYY). But still it's getting outputted in the format DD/MM/YYYY only as that's the way its defined in the User Master!
    Is there any solution for this? How can I 'override' defaults in the SAP User Master?
    Thanks,
    Mahesh

  • CRMXIF_ORDER_SAVE_M - Lead_Start Date not being populate.

    Hi Gurus,
    I am migrating Lead Data in SAP CRM using CRMXIF_ORDER_SAVE_M / CRMXIF_ORDER_SAVE_U03 IDOC structure. The problem is that the Lead Start and End dates are not being passed to the database. I am populating the data at Header Level using the appointment segment. You help is much appreciated.

    Hello,
    I am not sure what you mean exactly, however you can test first in crmd_order
    to create a lead and have a look (in debugger) which fields are needed and how they are stored on database.
    Please verify also your date profile and date type and rules.
    Best regards
    Rene

  • Some client data not being populated after upgrading to NCS 1.1.0.58

    After upgrading to Cisco Prime NCS 1.1.0.58 some of the client data is not being populated or gathered. The graphs labeled "Client Count By Association/Authentication" and "Client Count By Wireless/Wired" are no longer being updated? Not sure what was changed during the upgrade or where to look to get it to start collecting the data again?                  

    Eajackson,
    Make sure your WLC, MSE and WCS/NCS code matches the compatibility matrix here:
    http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html
    Sent from Cisco Technical Support iPhone App

  • The folders under iCloud Drive are not being uploaded to iCloud

    I seem to read similar problem reports in this group but I want to make sure that indeed it is the same problem I am having. I moved all my folders to iCloud Drive some weeks ago and they were being uploaded to the cloud since then. In total I have 150 gigabytes of folders and about 100 are uploaded to the cloud which I can see in the settings of iCloud under system preferences. I realise that during the last week nothing is being uploaded anymore. There is still about 50 gigabyte of files that need to be uploaded automatically but nothing happens. I do not understand how the upload process works. What determines when the upload takes place? What determines how much of my files will be uploaded today and then the next day: because sometimes the upload used to take place the whole day while at other days only for a few hours. I definitely need a clarification here. Could some please respond? 

    If you're talking about photo stream:
    Check the following:
    From your Home screen, tap Settings > iCloud > Photo Stream, and make sure the slider is set to the ON position.  If grayed out, check Restrictions in Settings>General.
    From the Home screen, tap Settings > Wi-Fi, make sure the slider is set to ON, and that your device is connected to a wireless network.
    Ensure that Camera app is closed on the device where you took the photo. Photo Stream will not upload photos from an iOS device until the Camera app is closed.
    Ensure your iOS device has not fallen below 20% battery power. To preserve battery life, Photo Stream downloading and uploading are disabled when the battery reaches this threshold. Downloading and uploading will resume once you charge your device, and the battery charge is greater than 20%.
    Note that when photo stream is turned on, only pictures taken from that point on will go to the stream, not existing photos.  For those, sync them to a computer using itunes and USB cable.

  • New songs are not being uploaded to icloud

    iTunes 10.7 - I just noticed today that new songs I added to my iTunes are not being automatically uploaded to the cloud.  This has worked fine ever since I subscribed to match. I even bought an album yesterday that went to the cloud fine.   I tried signing out and signing back in, updating my match, purchasing a song from itunes..nothing is working.
    Is anyone else having this problem?
    Thank you

    If you're talking about photo stream:
    Check the following:
    From your Home screen, tap Settings > iCloud > Photo Stream, and make sure the slider is set to the ON position.  If grayed out, check Restrictions in Settings>General.
    From the Home screen, tap Settings > Wi-Fi, make sure the slider is set to ON, and that your device is connected to a wireless network.
    Ensure that Camera app is closed on the device where you took the photo. Photo Stream will not upload photos from an iOS device until the Camera app is closed.
    Ensure your iOS device has not fallen below 20% battery power. To preserve battery life, Photo Stream downloading and uploading are disabled when the battery reaches this threshold. Downloading and uploading will resume once you charge your device, and the battery charge is greater than 20%.
    Note that when photo stream is turned on, only pictures taken from that point on will go to the stream, not existing photos.  For those, sync them to a computer using itunes and USB cable.

  • Local bands and my own music not being uploaded

    Hi all
    I searched but am not coming up with an answer.
    I have a lot of local bands and indie bands as well as my own recorded music in itunes. I subscribed to itunes match and these songs aren't being uploaded that I can see. On my phone there is no option to download them to the device.
    Im sure it something dumb Im doing wrong but I cant figure it out.
    Any help would be great.

    If the iCloud status shows them as being "uploaded" , they should be available to play within a short period of time. Stuff I added earlier today have appeared.
    Does the iCloud status show that they have been uploaded.
    JIm.

Maybe you are looking for

  • How can i print text message from my iPhone?

    I have an iPhone 5S.  How can I print text messages to save those conversations?

  • How to do "DDL rollback"

    I have script, that contains several DDL-statements. For example script removes FK-constraint from a column, then it renames the column, then it puts new data to the column, then it puts new FK-constraint to the column, also some other ALTER-statemen

  • Why do my captions not appear in my image project?

    Why do my captions not appear in my image project?  Is there a command to turn them on?

  • Depreciation reverse ( urgent)

    Hi If I have done the depreciation run , and now I want to reverse the depreciation of one of the assets then how can this be done? Please advise ASAP Good points will be rewarded for useful answers. Thanks

  • Unable to open the TAR file

    I have downlaod the P2G and try to unzip the TAR file with the help of Winzip, but it is giving me error 'Reading fail after 293 enteries' if any one has any idea please do let me know With regards