Z1 wont start after stick firmware was installed

I had some problems with the current version of my Xperia Z1 and decided that I needed to install the stock firmware. I downloaded the standard and advised Flashtools and installed the stock firmware. After attempting to turn the phone on, the following screens appeared. The "Sony" logo appears, then the "Xperia" logo appears, and then the swirly ribbons move from left to right on the screen, and suddenly they stop moving and it goes back to the "Sony" logo screen and the entire process repeats. I don't really know what to do now, either to install a different firmware or maybe is there a program that resets the phone by simply connecting it to the USB. The problem is, the phone wont start. Help will be highly appriciated.

Download SUS:
http://www.sonymobile.com/gb/tools/update-service/
Charge the phone for at least 2 hours,repair with SUS.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Similar Messages

  • SQL Agent wont start after a SQL 2012 install

    Ive been trying for several days to install an instance of SQL 2012 on a server, but im having this problem where when the instance is created, the SQL Agent shows 'Agent XPs disabled'.  
    I have enabled this using sp_configure 'Agent XPs',1 
    But when I turn on the agent it stays on for about 30 seconds and then turns off again. (It is 2012 enterprise i am using)
    The agent service account is an administrator on the Server. I have installed SP1, but the agent keeps failing. I have installed 7 or 8 times.
    Please help!
    Thanks,
    Zoe

    That gives:
    Microsoft
    SQL
    Server 2012
    - 11.0.2100.60
    (X64)
    Feb 10 2012 19:39:15
    Copyright
    (c)
    Microsoft
    Corporation
    Enterprise
    Edition
    (64-bit)
    on
    Windows
    NT 6.1
    <X64>
    (Build
    7601:
    Service
    Pack 1)
    (Hypervisor)
    My account is a member of the admin group yes.

  • Safari wont start after i installed avi player any suggestions?

    safari wont start after i installed a avi player any suggestions?

    You may have installed the "VSearch" trojan. Remove it as follows.
    Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data before proceeding.
    Step 1
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    Reset the home page and default search engine in all the browsers, if it was changed.
    Step 2
    Triple-click anywhere in the line below on this page to select it:
    /Library/LaunchAgents/com.vsearch.agent.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchDaemons/com.vsearch.daemon.plist
    /Library/LaunchDaemons/com.vsearch.helper.plist
    Restart the computer and empty the Trash. Then delete the following items in the same way:
    /Library/Application Support/VSearch
    /System/Library/Frameworks/VSearch.framework
    ~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
    Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
    This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • SSMS wont start after Installing SQLServer

    Hello,
     After SSMS wont start after updating VS2012. I have unistallled and installed a number of times but the error message I keep getting indicates that Visual Studio shell Isolated is missing. I have tried to install this directly from the set up dvd but
    no success.
    Also I noticed that VSShell is missing in the C:\Program Files (x86)\Microsoft SQL Server\120\Tools\Binn.
    I am assuming that this has something to do with it.
    Can someone please tell me how to fix this?
    Thank you.
    here is the error message received

    Hi,
    Try the below solution and see how it works.
    Note: Take a backup of the key before make any changes on the registry keys.
    http://support.microsoft.com/kb/322756
    Start regedit.exe
    Go to HKEY_CURRENT_USER\Software\Microsoft\SQL Server Management Studio
    Delete 12.0_Config
    Restart ssms.exe
    Here is the original thread:
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/aeff13b3-3960-4724-bb9a-7e585651d7f4/sql-server-2012-error
    Thanks.
    Tracy Cai
    TechNet Community Support

  • 770-G45 wont start after ShutDown

    Recently installed MSI 770-G45, problem starts when i regulary shutdown comp. from WinXP or Win7 64-bit.Computer wont start after that, like ther is no power, fans dont spin, no bips, NOTHING. I got to unplug power cord and plugg it again into psu, after that it starts normaly.
    Strange thing is that computer starts normally when i manualy shutdown system(holding the power button on the case).There is no exception, starts perfectly evry time after manual shutdown, no need to unplugg powercord.
    Rest of my components> Phenom II X2 555BE, Kingston 2GB 1333mhz, Sapphire 5770, HDD WD 250gb,PSU Corsair TX 650w.
    Tried to change power cord, tried other PSU, other case (tought its maybe power button but no), changed mobo battery, installed several OS versions (XP, Win7) and still dont have solution.
    MS 7599 ver. 2.0
    Bios version 10.2
    MoBo is new bought it 3 days ago.
    PLEASE HELP!!!!!

    First: It is important to clear CMOS after a BIOS update. Unplug power cable before the clearing, as there can be no power in the system
    Second: Rebuild the system, but outside the case. Use only PSU, motherboard, processor, one stick of memory and graphics card. If it works better then, you may have a short, from a stand-off too many, or poorly isolated wire somewhere.
    But I second it sounds like a motherboard problem. You'd better contact the one who sold it to you.
    Oh, an oldie thing! You will need to install Windows again, with the new motherboard and all.

  • After firefox 30 was installed this week the browser is slow but will not allow navigation away until finished

    After firefox 30 was installed this week the browser is slow on sites with a large amount of information, data to set up,or many pictures or videos but will not allow navigation away until completely finished. Stop and back does not help it just continues the original site. Prior to release of 30 although slow it did allow navigation away or back.

    Hello dexrek
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
    *In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    '''also,''' in your system details we can see that you have in your[http://kb.mozillazine.org/Profile_folder_-_Firefox#Windows profile folder] a [http://kb.mozillazine.org/User.js_file User.js] file.
    (The user.js file does not exist by default. If you create the file forget it, if not, delete the User.js file. Note that some programs create and write in the User.js file also).
    thank you

  • Intel imac wont start after changing permission

    intel imac wont start after i changed my hard drive permission to let me read and write, then i clicked apply to all enclosed files.i turned it off no problem. then it never started up again in os x. the grey screen with apple logo appears,then after a minute it restarts, and will keep doing that if i let it. i can start up in windows xp, but i dont know how to do anything in windows xp that will affect os x. i can use the hard drive in target mode, but i cant figure out how that can help me. i use a macbook to view target disk. ive spent hours looking through help and support. finally i do not have the os install disks. PLEASE HELP!

    My apologies for the inept instructions.
    Restart normally. Open Terminal in the Utilities folder. Paste the commands in the Terminal application to avoid typos:
    sudo su
    Press RETURN. Enter your admin password when prompted.  It will not be echoed to the screen. Press RETURN again. Now paste each of the following at the prompt and press RETURN after each.
    chown root:admin /Applications
    chmod 0775 /Applications
    chown root:admin /Library
    chmod 1775 /Library
    chown root:admin /System
    chmod 0775 /System
    chown root:admin /Users
    chmod 0775 /Users
    chmod -R -N /Applications
    chown -R :admin /Applications/*
    Again, my apologies.

  • Iphone4 would not restore Error -50. I have tried to restore and it restored it to the point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out.

    Iphone would not restore---- Error -50. I have tried to restore, and it restored it to the new point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out. I can see earlier backups in my C:\Documents and Settings\user\Application Data\Apple Computer\MobileSync\Backup folder. There are four subfolders in this address. I need my contacts, photos, and messages back. I know this is a common error but I can not figure it out. I have ran the other troublshoot items in the error steps for 13 and 14 like apple says. Is there a way to call apple and get a step by step of how to restore from another restore point? Does anybody have a solution????

    It tells you to go to Error 13 and 14 if you receive error (-50).
    Here is what I have tried...
    Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting. I have moved it around to different ports.
    Put a USB 2.0 hub between the device and the computer. Didn't change anything.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts. Removed all virus protection and firewall.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.Used the Microsoft fix it.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online. Doesn't matter.
    Try to restore from another known-good computer and network. I do not know how to do this or how to find the correct/full/complete restore point. There should be more information for this.

  • HT4623 my ipad can no longer acces itunes store after iso 7 was installed... can i go back to ixo6

    i can no longer access itunes store after iso 7 was installed... can i go back to iso 6

    No you can't.
    Reboot your iPad:  Press and hold BOTH the power and home buttons at the SAME for up to 30 seconds, until the Apple Logo appears, then let go of both buttons and your iPad will restart.  You won't lose any data settings.  When your iPad restarts see if you can access iTunes.

  • My System wont start after setting FSB to 200

    My System wont start after I'd set my FSB to 200,
    when the system starts, nothing comes up, and my Pc screen LED just blinks,
    I have tryed to reseting the Bios but it doesn't help, have also tryed with new RAM and new Graphiccard but it doesnt help.
    Please help me:-(
    Am I resetting the Bios wrong? I set the jumper to safe mode and 100mhz, then I use the jumper to clear the CMOS. And the restart at set the jumpers back
    3ghz AMD BARTON
    NVIDIA nforce2 k7bn2 Delta
    512 DDR RAM PCI3200
    300WATT

    Quote
    Originally posted by roobster
    set the multiplier lower , FSB(200) X multiplier (ex.10.5) = 2100 MHz , and your voltage raise it a bit too let say 1,700 ( default is 1.650 ) If this doesn't work at once , keep booting . My rig started up after 5 times . Strange but true .
    does not work if he has a 3000.
    they are multiplier locked.

  • Portege Z930-118 wont start after BIOS update

    my PORTG Z930-118 failover and wont start after i upgrading in middle of upgrade i remove power and press shutdown bottom after that i see the power and wireless but screen still black ?
    Any help please

    Hmmmm.... BIOS upgrade interruption has screwed up BIOS and thats the reason why your notebook doesn't start properly. BIOS is damaged now.
    In such case you need professional help by authorized Toshiba service provider.
    On this forum you can find many threads about similar problems. Some people have tried to fix this alone and if you are interested to read how one other forum user has fixed it check please this thread.
    Ayway, you can contact nearest Toshiba service, explain the situation and ask for help.

  • XP Machine wont start after 8310 Software install

    Sorry if this has been covered before - but I installed the desktop software that came with my BB 8310 Curve and now my system wont start. It gets to the Window Splash screen (the windows logo and the bar accross the bottom that runs accross the screen) and then resets. This happens in regular startup, last Known good config, safe mode with network, safe mode. Windows will not load.
    Windows XP
    SP2
    2 Gig ram
    500 Gig HD
    (powerfull machine - expect softare corrupted registry)
    Any suggestions before I do a rerinstall of windws to get machine to load OS
    Many thanks 
    -John-

    Do you know what version it was you installed?
    I would start with a clean uninstall of that Desktop Manager software (that is what you installed?). See this link for instructions:
    http://www.blackberryforums.com/rim-software/25937-how-perform-clean-uninstall-reinstall-blackberry-...
    Then, I would recommend downloading and installing Desktop Manager verions 4.6 from here:
    https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
    Persoanlly, I would recommend the version you find there withOUT the Media Manager software.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Firefox wont start after 1st install session.

    Some time ago firefox updated, after update it crashed on startup when checking add on compatibility. After this crash it never started again.
    I uninstalled and re installed and it started fine after install, but when i close it and try to open again it doesn't start. The process is there and stuck at 13 cpu usage with memory usage around 15k.
    Every time it starts after the initial install it says "The bookmarks and history system will not be functional because firefox is being used by another application" i have no idea what may be using it, microsoft security essentials is the closest thing to anti vir installed.
    I uninstalled and reinstalled multiple times, deleting all files including registry files but its the same issue, for the past few months i've been using Chrome and now after months of torture i want my Firefox back! Help!

    * Start Firefox in Safe Mode by Holding down the SHIFT key while starting Firefox
    * As an alternative method, select "Start -> Run" and enter one of the following in the Windows Run box:
    ** firefox -safe-mode
    ** "C:\Program Files\Mozilla Firefox\firefox.exe" -safe-mode
    -> Firefox Safe Mode window will appear -> DON'T SELECT ANY OPTIONS, just click '''Continue in Safe Mode'''
    -> Troubleshooting extensions and themes
    * https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
    Check and tell if its working.

  • Windows 8 wont start after format

    Hello,
    So i decided to format my pc for the first time since i build it, i did everything as usual but it wont start, tried the way xmad posted but its the same, im using the same iso i used the first time, after the installer says its going to restart to complete the instalation, the pc reboots and then nothing happens, i can move the mouse pointer but the screen is black, this happens when i boot from the hard drive with the prefix "UEFI".
    if i boot from the hard drive without the prefix "UEFI" i can see the windows 8 logo loading but then its the same black screen.
    PC specs:
    i7 4770k
    Msi z87 mpower max
    120gb ssd
    16gb ram
    850w psu
    radeon hd7970
    Any ideas?

    No i didnt update the bios.
    Update: I got a copy of windwos 8.1 and tried installing it the same way and it worked(still havent updated the bios).
    i dont know what was the problem with win8, i dont know if the iso file got corrupted which is very rare since i used it like 2 weeks ago in another pc, it cannot be the usb stick (i used the same usb stick to install win 7 and 8.1) and also tried installing it from a dvd.
    I think im going to stay with this windows, thanks for replying.

  • Safari wont start after Leopard software update

    After updating Leopard to 10.5.7, Safari wont start. I get an error message "Cant load Tastyapps AV plugin." or something to that effect.
    What gives? anyone know?

    I was using Videobox as a trial version (on the site you have the option of buying or trying for 30 days). After the 30 days it stopped working and I just moved it to the trash. I seems to have left something in Safari however that causes it to not want to start.
    Using Firefox i was able to go back to the Videobox site and download and install the trial version again. I was then given the option of installing the Safari plug in which i did. I then went to the Videobox menu and clicked on uninstall Safari plugin. and then i just moved videobox to the trash again using AppCleaner.
    So, you should be able to do the same thing. Just click on "download" instead of "buy" on the Videobox site. I'm sorry, I couldnt find the plugin files for manual deletion either.
    Maybe you should start a new thread and someone will know how to do that.
    Thanks!

Maybe you are looking for