Z10 Call Display from Contact - Not Showing Company Info

From the previous versions of Blackberry's OS, whenever I would receive a phone call from a contact in my phone, the name of the Contact and their Company (as I entered it) would show up on the screen. Now, it only shows the name and then has the number below. I meet a lot of people and the Company reference helped me understand who was calling and for what. Is there a way to have it so when someone calls, the name, company and phone number as in BB7.

This feature is an absolute must. Driving me crazy not seeking the company name of callers. I have 17 Tony's and now have no idea who is calling. This needs a fix ASAP!

Similar Messages

If I create a contact from my call register it does not show up in the contacts on my i phone but does show up in my i cloud contacts. Has anyone else had this happen?

If I create a contact from my call register it does not show up in my contacts on my Iphone but does show up in my icloud. Has anyone else had this happen?

Are you sure iCloud is turned on and that contacts is also turned on (Settings>iCloud) on the iPhone? Be sure the iPhone is not set to Airplane Mode.

Contacts not showing up on incoming calls although it is stored on my iPhone 5

contacts not showing up on incoming calls although it is stored on my iPhone 5

There could be any one of three solutions... Try these:
1. Make sure you set your own country code at Phone Dialer Screen > Options > Smart dialing.
Set your country code in this format: "+xx" where xx = your country code. Some countries have two or three digit Country Codes. Do not place the '+' in your contact's entry.
* In the US, set this Country Code as "+1", and place your loca area code in the proper box (this normally the default setting in a new BB).
2. At the same location, change the National Number Length to the number of digits for your country (since some countries will have less than 10 as set as the default in the BB). Find out the total digits, minus the country code. Do not place the '+' in your contact's entry.
* For example, some countries have a total number to 8 (plus 3 for country code). You would enter "8".
3. You may have "Content Protection" set on your Address Book.
Look at Options > Security > General Settings. Scroll down to Content Protection > Include Address Book = NO.
On your device, it could be at Options > Password.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Contacts from 2010 not showing info in 2013

I recently upgraded from 2010 to 2013. When the contacts moved over i cannot find all of the information like anniversary date that was in the details tab of 2010. Is there an icon or setting that i am missing to see all of this previous information?

Hi
As per the information and details provided by you, Contacts from 2010 not showing info in 2013, then please follow these steps: -
After switch from Outlook 2010 to 2013, simply press
CTRL+3 to see an overview of all your Contacts folders. If the folder is there and holds your contacts, then either the folder has not been set as an
Outlook Address Book or Outlook Address Book Service is broken in your mail profile.
If the contacts are not in the contact folder, then you either forgot to select the folder when creating an export, or didn’t select the folder when importing the
PST-File. You can take a fresh copy of your backup or the pst-file that you imported from.
Then connect to the pst-file in Outlook via:
File > Open > Open Outlook Data File
Now, check the contacts folder again. If you did not find your Contacts in that pst-file, you can select them all
(CTRL+A) and move them (CTRL+SHIFT+V) or copy them
(CTRL+SHIFT+Y) to your main contact folder.
I hope this information will be helpful for you.
Thanks and regards
Shweta@G

Contacts not showing up

Im having a problem with my iphone 4. My contacts are in my phone when i search for them and also show up in my recent calls and text messages. However, whenever i touch contacts to bring up the list none of them are there. Does anyone know how to fix this?

Hello everyone!
For all of you out there who have received phone calls, text messages, etc, and have tried adding a contact by means other than directly via the contacts app only to have your contact not show up ANYWHERE (except maybe in a spotlight search), this quick troubleshooting guide is for you.
Disclaimers: This can be performed on an Apple computer, I do not troubleshoot for PC's (however, anyone who knows their way around computers can easily modify the steps for a PC). This method can also be used if you sync your contacts via MobileMe like I do, and should work for the iPhone 3G, 3GS, and 4. I have the latest OS on my iPhone, but it should work with any recent OS. My iTunes has been updated to the most recent version.
Step 1: Open Address Book on your mac. Make sure your address book view is extended to show your groups in the left column. Under groups, everyone will have a group labeled "All Contacts". If that's the only group you have, it's time to create another one. Click the "+" at the bottom of your group column and name your new group whatever you want. For my purposes (as this was an iPhone issue), I named my new group "iPhone Contacts". Do not add any contacts from "All Contacts" to your new group, as this will be unnecessarily redundant. Close Address Book, you're done with it.
Step 2: Open iTunes and plug in your iPhone. Hopefully you have your settings to manually sync when you plug your iPhone into iTunes, otherwise wait until it's synced to continue. Click the "Info" tab in iTunes. The first option is Sync Address Book Contacts. Make sure this option is checked. Under the first subheading, make sure "All contacts" is checked. Below the groups box, there will be a line that says "Add contacts created outside of groups on this iPhone to:" and make sure this is checked as well. (Bonus info- Unless you created a contact directly via the contacts app on your iPhone, that contact ends up in another list. This is why you can't see it right now.) At this moment is where that new contact group you created in Address Book comes into play. Use the drop-down menu to the right of this option to select that group (remember mine was "iPhone Contacts"). Do not change anything else. Now click "Sync" in the bottom right corner of iTunes.
Step 3: Once your iPhone is synced, open the Contacts app on your iPhone. If it opens to a contact list, tap the "Groups" button in the upper left corner of the screen. You should see two or three sections. The top section will simply be "All Contacts". The second section will be titled "From My Mac" and will display both "All from My Mac" and the new group you created in Address Book. If you use MobileMe, you will have a third section titled "[email protected]", under which your MobileMe contact group will fall. Make sure you tap the top group, "All Contacts". You will find those "missing" contacts now listed among all your other ones.
Bonus: If you find you have duplicate contact names but neither contact has a full information card, you can edit the contact, scroll to the bottom and tap the "Link contacts" button, then link your duplicates to insure you have all the info you want.
Success!! If you have any questions, let me know.
Source: Freelance Nerd Herd

Contacts not showing in the list

My iphone 4 contacts suddenly missing from the contact list. But when I use the search bar, messages able to show the contact name. How can i get my contact to display in the contact list again.
Since those contacts not showing, will syncronize helps my iphone helps?

Anyway i can extract the address book file so that i can have those numbers on my PC and i can manually key in again?

Why are my contacts not showing up in my iMessage on my macbook pro?

Why are my contacts not showing up in my imessage on my macbook pro?

open messages. go to messages>preferences>accounts. select your icloud account from the left sidebar, and uncheck 'enable this account' then recheck 'enable this account'
you should also be using icloud to sync your contacts. sytem preferences>icloud. check the 'contacts' box

Not showing company list after installing B1 2007 on windows 2003 standard

Hi gurus,
I am facing a problem regarding B1.System not showing company list after installing B1 2007 on windows 2003 standard edition.
Plz help me.
Thanks in advance
Regds
Maddy

Hi Maddy,
Please tell me did u upgrade from 2005 to 2007 or u performed a new installation of 2007???
Vasu Natari.

Why are contacts not showing up after added

why are contacts not showing up after added. Don't show up after they added when I want to select then for a new email

I am replying to my post with the hopes that someone can please help me!
I am adding new episodes, but they don't show up on the main page. The most recent one to show up is from 10/29/07. I added a new episode today, but it doesn't appear on the main page (before you subscribe). Is there a limit to the # of podcasts that can appear on the main page? Has anyone else had this problem? All the relevant info is above.
Your help is much appreciated.
Message was edited by: oneness_podcaster

Importing songs from CDs - not showing up in my Library

I am aving trouble importing songs from CDs. I completed the process as instructed - using the "import this CD" button (I have done this many times successfully).
The import process ran OK. When the Import process completed, I looked in my music Library and the songs were not there.
I repeated the process - same result. Nothing in my music library.
What should I do?

Re: [iPod classic] - Re: Importing songs from CDs - not showing up in my Library
Thu, Feb 09, 2012 08:01 PM
When I load the CD, iTunes recognizes it and asks me if I want to Import the CD.
When I click on "Import CD", the song titles are retreived and show up. The iTunes bar at the top of the screen shows "Importing track 1" or "Importing the song by title". Each song is imported, and I can see each song being impotrted via the iTunes bar at the top of the screen. iTunes shows that the CD has been imported, and the system dings when the import is done.
This is exactly the same as every other time I've imported CDs. The only difference is that the songs do not show up in the library.
Thanks

30 inch Apple Cinema Display-system prefs not showing native resolutions

The 30 inch Apple Cinema Display, seems to be working fine with the mac pro, but when I try to hook up the 2009 mini, the display preferences do not show the mini's native resolution of 1920x1200. The maximum it shows is 1280x800, and only gives a few other choices. This mini had once been attached to a TV monitor, so I am wondering if that has something to do with the lack of choices in the system preferences. Does anyone have any ideas on how to get the system preferences to display the correct info so that I can adjust the resolution ?
Thanks

Being compatible with the 24-inch Cinema Display and being able to use it at resolutions higher than 1280 by 800 doesn't necessarily mean that it can drive the 30-inch Cinema Display at its full resolution. You need to use a dual-link DVI connection as stated above.
(62751)

Bridge does not shows file info, just thumbnails, what's going on? already adjusted in preferences, but still only thumbnails and not the info of the file

Bridge 8.5 does not shows file info, already adjusted in preferences but still just showing thumbnails only.
Can anyone please help?
Thanks

The single download means that you won't be able to redownload it from the store without paying, either on a computer's iTunes or an iOS device - it doesn't stop you from copying the audiobook to your other computers or syncing it to your iOS devices, you just can't redownload it. (I believe that they are all supplied to Apple by audible.com, so I assume that it's them requiring the one-time download.)
You can download audiobooks on your computer's iTunes and sync them to iOS devices, you do not have to buy them directly on the device (if you do then you can copy them back to your computer's iTunes library by connecting the device and using the File > Devices > Transfer Purchases menu option on your computer's iTunes).
What you are doing to sync them should work i.e.
- connecting the iPad to your Mac
- selecting the iPad on your Mac's iTunes
- selecting its Books tab and selecting the audiobooks that you want to sync to the iPad and syncing/applying that selection.
You should then get an audiobooks option in the Music app on your iPad. If they aren't appearing there then do they show in Settings > General > Usage > Music on the device - if you have audiobooks on the iPad then they should be listed there under an 'audiobooks' heading.
By 'restart the iPad' do you mean a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
You could also try closing its Music app via the iPad's taskbar : Force an app to close in iOS.
And do a soft-reset and retry syncing.
I assume that music and other items sync ok ?

Contacts not showing on incoming calls

Hi. I have a 9300. I do not subscribe to call display with my carrier provider, but used to get a picture of the person calling me if they were one of my contacts. I plugged my phone into my computer and got all the updates it suggested. Now when someone calls from my contacts, it just shows them as unknown. Anyone know how to get this working again? Thanks so much!

I had the same issue. I just visited the Apple store today. He switched my keyboard settings from english to french and back again. That corrected my issue. Hope this can help you, too!

Contacts not showing when others call me

I've just got my z10 and used my exchange account in activeSync mode and every thing worked fine, the issue is when someone calls me his name is not showing up, also if I dial a saved number the phone the name don't show up, what is this issue ???

I had similar issue with the text messages not showing sender's name. Go to Settings > security and privacy > sim card > edit phone number and I wrote my number without the country area code and it worked fine!

Contacts not showing after clicking on dial button

Hi Everyone,
I am new to this forum, we are currenlty testing the new Blackberry Z10 to be used in our company.
I came across a problem that with a user with his contacts, we are using the Microsft Active Synch option with a traveler server. The contacts are all synching fine etc. Now the problem is that when clicking on the dial button I only see the standard sim card contacts. Somehow it does not show the contacts
When going to contacts they are all there. Also when I dial from those contacts the name does not come up it only shows the number in dial menu. Looks like a bug or a incorrect setting on the device.
Can someone reply to this
Thanks in advance!
Hesperus

Try rebooting the device by long pressing the lock button and selecting restart. That should mostly resolve the problem. The phone app at times takes time to show the contacts corresponding to the phone numbers.
Twitter: @ukmight
1. Click on the " Like " button if you find anything helpful posted.
2. If any of the replies in your post has resolved your problem, mark the reply(ies) as " Solution ", so that others can readily view the solution instead of creating another redundant post.

Z10 Call Display from Contact - Not Showing Company Info

Similar Messages

Maybe you are looking for