Z10 camera flash out of sync
Hi, I have an issue when taking pictures with flash. Camera works fine , flash works, but the problem is when I take the shot flash lights up, but camera takes a second or two to focus, and when it shoots the flash already went off, so I can't take pictures in the dark. Please help if someone has a solution for this issue.
Thanx
I doubt it's hardware. My suggestion at this point would be to reload the OS to the device. I suggest making a backup of the device using Link then using an autoloader to reload the OS to the device.
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!
Similar Messages
-
3/16/2014 - After updating to IOS 7.1 this AM, the camera flash appears out ouf sync. All photos are sercerly "washed-out. Just me.?
Curtsiphone wrote:
All photos are sercerly "washed-out. Just me.?
Probably.
Try a restore from backup, this will reload iOS on the device and hopefully correct the issue. -
Video import, multiple camera - drifts out of sync
Hi - I've been using iMovie for years, am now starting with Final Cut Express because I have a project with multiple video tracks. Here's the problem: I've imported video from two cameras that were used simultaneously to record a play. I can sync the two video clips together, but if I sync them at the beginning of the clip, then at the end of the clip they are close to a second apart - they 'drift' progressively further out of sync as the clip goes on.
Sorry, I accidentally submitted the question before I had finished entering it ... here is more info ...
This is NOT an audio/video sync issue, which I have seen reported elsewhere. Each of the clips from the two cameras has its ownaudio track which is in sync with its own video. But both video/audioon the clip from camera 1 drifts out of sync with the video/audio fromcamera 2.
Finally, another (possibly related) issue.In addition to the video from the two cameras, I have an audio trackwhich was recorded on a separate audio recorder. This also drifts outof sync with the video - in fact it is not in sync with EITHER of thetwo imported video tracks.
All the video clips are thesame in terms of frame rate, sample rate etc. The audio track has thesame sample rate as the video clips. The only thing I can think of thatmight be an issue is that while two different MiniDV cameras were usedto record the play, I only had one camera available when it came timeto import - so I imorted the video from both cameras using the samecamera. So the video from camera 1 was imported using camera 1, but thevideo from camera 2 was imported using camera 1 as well.
Any suggestions?? thx -
Export to camera, audio out of sync
I am attempting to export a couple of iMovie projects to my Sony digital camcorder for archival.
I am losing audio sync during the export.
The original project in iMovie is fine. The archived video on the camcorder is well out of sync.
Does anyone have suggestions on cause and potential cure?
Thank you!I experience the same thing when exporting to my Canon whether the audio is extracted or not. It also doesn't matter if the iMovie project in saved on my boot drive or an external drive, or whether my camcorder is connected directly or via another Firewire device. (Although some of the above scenarios do exacerbate the problem.)
I have learned not to use Export to get my movie back on tape. Instead, I go to the Preferences and select "Play through to DV camera". With my Canon, this works when I set it to Playback mode, then activate the Record Pause function. I just have to unpause the camera, click Play in the iMovie window, and the camera records the iMovie project. I have never had a problem with the audio losing sync using that method.
Regards. -
One camera of three not syncing into color from FCP
Running lastest version of everything on imac 2 ghz intel core 2 duo 2 gb memory. Useing multi-sync to edit three camera shoot shot on vx 200 with p2 cards. Edit is great. One camera goes out of sync by a lot when importing to color.
tried export each clip from this camera and reimporting qt back into sequence. This worked expect, the clip got squished going into color.. didn't stay at HD settings, probably a pixel issue. Tried reexport using pro-res 422 HD 960x720 24p which was our camera setting.
This works but sometimes but not all the time. I get a render error "can't find capture card".
The camera that goes out of sync is in two parts, thus the multi-clips had to be
resynced... this shouldn't be an issue with xml as it's reading the time code unless the timecode is the same on both clips...hmmm...From the Release Notes:
"Known Issues Affect Sequences Containing Multiclips That Are Sent to Color
Sequences that contain multiclips have known issues that affect Final Cut Pro to Color round trips."
Color does not like multiclips. Too bad the forum search function is disabled as solutions have been offered up, I just can't remember them currently as I rarely touch the FCP multiclip function. -
Two synced video clips come out of sync in the middle
I am working on a two camera project and I have synced the cameras using a sync point. At first the videos remain in sync and play fine, but shortly into playback the tracks come out of sync. I have not moved any of the tracks. How do I keep this from happening?
I am using Final Cut Express HD 4 and am working from an external hard drive. It is a Lacie 500GB -8Mb Cache - 7200RPM Mini Hub. The max interface transfer rate is 400Mbits/s for firewire and 480Mbits/s for USB 2.0Does the video from the two cameras go out of sync with each other or the audio? What are the item properties for the two clips?
-
Does anyone know a fix for video being out of sync after publishing to Flash in Captivate 6?
I'm working in Captivate 6.0.2.325 on Mac OS 10.6.8. My Captivate file is just 10 slides, and 2 of them contain talking-head style video clips 30 - 40 seconds long.
Everything looks fine in Preview, but when I publish to Flash the video segments appear choppy and the audio is badly out of sync.
Also, I have one slide where the audio does not play after publishing, though it plays in Preview. It's a widget slide.
I have tried the fixes suggested in this forum. My Preferences slider is slid all the way to retain slide quality etc. I've tried changing Flash versions and forcing re-publishing of slides. I've tried copying all my slides into a new file. No luck.
I have spent approximately 6 hours trying to resolve this problem and I'm about at the end of my rope, so any suggestions will be much appreciated! I will have to insert LOTS more video segments to complete this project.
Thank you!Thank you, Rod!
While researching frame rate I came across this helpful blog posting: Crazy about Captivate: Lessons Learned: Video and Resolution in Adobe Captivate
This is the line that caught my attention: "I discovered, after several experiments, that if you publish a course in Captivate as SCALABLE with a video inserted, no matter what the resolution, it makes the video look pixelated."
When I unclick the "scalable HTML content" button before publishing, the video is fine!
Big sigh of relief! Now I just need to figure out why audio won't play on one of the slides (it has an accordian widget, if that's relevant) and why I can no longer use Effects (I get the message, "Effect file is not valid") -
Audio out of sync in Flash Player 11
On most sites that have embedded Flash video, the audio is way out of sync with the picture (by a second or more).
One example -
http://www.ora.tv/larrykingnow/keith-olbermann-1-0_sc5nygmh
Using Flash Player 11.7.700.169
Windows XP, Internet Explorer 8
How can I fix this?
thanksThanks for the reply. The example videos are not good to test sync since the camera is moving around and no close-up lip sync, but they appear to be way out of sync. The Flash one definitely is, the HTML video ran slowly so it doesn't seem to be running in real time. I'm not sure how to generate the dxdiag report you mentioned. Here's what shows at Display Properties/Advanced/Graphics Properties dialog:
INTEL(R) EXTREME GRAPHICS REPORT
Report Date: 05/19/2013
Report Time[hr:mm:ss]: 16:16:32
Driver Version: 6.14.10.4342
Operating System: Windows NT* 5.1.2600 Service Pack 3
Default Language: English
DirectX* Version: 9.0
Physical Memory: 1022 MB
Min. Graphics Memory: 1 MB
Max. Graphics Memory: 64 MB
Graphics Memory in use: 8 MB
Processor: x86
Processor Speed: 2790 MHZ
Vendor ID: 0x8086
Device ID: 0x2562
Device Revision: 1
* Output Devices Connected to Graphics Accelerator *
Active Monitors:1
Does that help? Again, I'm using Win XP and IE8.
Thanks!
Steve
P.S. I got a notification that there is an update to Flash Player but every time I try to access it I get an error message, as if it can't connect to the server. -
Out of sync audio when trying to capture from digital 8 camera to quicktime, please help
Just trying to capture hi 8 tapes using a sony digital 8 dcr-trv355e pal into quicktime;
great clear video but audio becomes out of sync like a bad kungfu movie,
contacted apple they tried to help, but they dont really understand issue
there are lots of people out there that are trying to digitise old analog video;
I have fcpx and imovie they both play the old video via the digital 8 camera but cannot capture;
that is why using quicktime; thanks!!Yes i think its something to do ith the fact its a wmv file, when i use mpeg footage it exports fine.
basically, no matter how long the video, the video is out of sync...its weird
i've decided the best thing to do is leave quicktime and export using windows media instead, that seems to give me a better looking picture witha small file size anyway
thanks for your help though! -
Flash Player doesn't play smoothly and out of sync in full screen
Hello! Everyone
The flash player (11.2.202.235) does not play smoothly and in full screen audio and vidoe is out of sync. I didn't use to have any problem at all, it only started about two weeks ago and since then despite trying various things (i.e. disabling hardware excelration, uninstalling & reinstalling, trying various browsers etc.) has not resolved the issue. I don't know why it has suddenly stopped playing smoothly as I have not installed any software recently which might have cuased this.
I am using Windows XP (service pack3) and have dual partion with dual operating system (both XP). There is the same problem on both operarting system and flash player won't run smoothly on either of them. Although my computer and graphics card is quite old but the downloaded movies/DVD playback is fine even in full screen. It runs smoothly and audio&video is in sync so I don't think it could my the graphics card.
As I mentioned I have tried all the browsers but without any luck. The BBC iplayer plays ok most of the time if not in full screen but as soon as you make it full screen the vidoe is more like a slide show and very jittery and audio&video gets out of sync. Same with youtube vidoes, they play ok when not in full screen but the video in full screen does not play smoothly and audio&vidoes gets out of sync. However the ITV player & Channel 4 content on 4OD does not even play smoothly when not in full screen and the video&audio is out of sync all the time.
It would be really helpful if anyone can suggest anything to resolve this issue as I have not been able to find anything on the internet to solve the problem and its driving me up the wall. Although I have tried to include as much details as I could think of so please let me know if I have missed any details that could be crucial in order to identify the problem.
Thank you very much for reading this and taking the time to reply and your feedback.
Below is the DxDiag report for my laptop:
Time of this report: 4/22/2012, 00:15:58
Machine name: TIMES-LAPTOP
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.111025-1629)
Language: English (Regional Setting: English)
System Manufacturer: TimeComputers
System Model: VT8372
BIOS: Insyde Software MobilePRO BIOS Version 4.00.01
Processor: mobile AMD Athlon(tm) XP 2000+, MMX, 3DNow, ~1.7GHz
Memory: 1248MB RAM
Page File: 809MB used, 2790MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904) DX
Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
------------ DxDiag Notes ------------
DirectX Files Tab: No problems found.
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: No problems found.
-------------------- DirectX Debug Levels --------------------
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
--------------- Display Devices ---------------
Card name: S3 Graphics ProSavageDDR
Manufacturer: S3 Graphics Co., Ltd.
Chip type: S3 ProSavage DDR
DAC type: S3 SDAC
Device Key: Enum\PCI\VEN_5333&DEV_8D04&SUBSYS_83751071&REV_00
Display Memory: 32.0 MB
Current Mode: 1024 x 768 (32 bit) (60Hz)
Monitor: Digital Flat Panel (1024x768) Monitor Max Res:
Driver Name: s3gnb.dll
Driver Version: 6.14.0010.0025 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 3/2/2004 14:02:26, 402048 bytes
WHQL Logo'd: Yes WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: s3gnbm.sys
Mini VDD Date: 3/2/2004 14:02:30, 167040 bytes
Device Identifier: {D7B75DD3-CE44-11CF-D873-7FA3A1C2CB35}
Vendor ID: 0x5333
Device ID: 0x8D04
SubSys ID: 0x83751071
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_C ModeMPEG2_A ModeMPEG2_D
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled DDraw
Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
------------- Sound Devices -------------
Description: Vinyl AC'97 Audio (WAVE)
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_1106&DEV_3059&SUBSYS_83751071&REV_50
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: vinyl97.sys
Driver Version: 6.14.0001.4170 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 8/10/2006 07:32:14, 204672 bytes
Other Files:
Driver Provider: VIA Technologies, Inc.
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 8000, 48000 Static/Strm
HW Mix Bufs: 1, 0 Static/Strm
HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No EAX(tm) 2.0
Listen/Src: No, No I3DL2(tm)
Listen/Src: No, No Sensaura(tm)
ZoomFX(tm): No
Registry: OK
Sound Test Result: Not run
--------------------- Sound Capture Devices ---------------------
Description: Vinyl AC'97 Audio (WAVE)
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: vinyl97.sys
Driver Version: 6.14.0001.4170 (English)
Driver Attributes: Final Retail
Date and Size: 8/10/2006 07:32:14, 204672 bytes
Cap Flags: 0x41
Format Flags: 0xFFF
----------- DirectMusic -----------
DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
DLS Version: 1.00.0016.0002
Acceleration: n/a
Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
Vinyl AC'97 Audio (WAVE), Software (Kernel Mode), Output, DLS, Internal
Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
Registry: OK
Test Result: Not run
------------------- DirectInput Devices -------------------
Device Name: Mouse
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: Keyboard
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Poll w/ Interrupt: No
Registry: OK
----------- USB Devices -----------
+ USB Root Hub |
Vendor/Product ID: 0x1106, 0x3038 |
Matching Device ID: usb\root_hub |
Service: usbhub |
Driver: usbhub.sys, 4/13/2008 19:45:37, 59520 bytes |
Driver: usbd.sys, 8/23/2001 13:00:00, 4736 bytesWould you mind opening a new bug on this at bugbase.adobe.com? Please include your dxdiag report, a specific URL and a link to this forum thread.
In the meantime, you might want to try our 11.3 beta or rollback to a previous version of the player to see if that resolves the problem.
Thanks,
Chris -
Quicktime .mov is Out of Sync on My Flash Drive
I have a 8GB HD Quicktime .mov file on my desktop that plays perfectly fine. However, every time I transfer that file to my 16GB flash drive and play it back on the flash drive, the movie is about one second OUT OF SYNC. I have tried this three times with the same results. Would appreciate any help anyone could offer. Thanks.
what is in an audio layer? if there's a sound attached, then its sync property must be set to stream if you want the display and sound to sync.
have you changed all your sound's to stream and, if so, has that solved the sync problem. -
Help Help - - 3 camera's.....Out of sync
Well, I have posted before regarding this but it is driving me nuts!
I have 3 cameras from a dance concert.....none on timecode.
Please help how I can pop in "cutaways" into places that have the same amount of space!!
O, please help....IF all cameras were recording the entire time (no start/stop), then place the clip from the camera angle you'll use most on track V1. With the clip highlighted, find a frame in the clip where there's a clear visual or audio cue, such as a camera flash going off or a loud noise that is indicated in the clip's waveform. Place a clip marker one that frame.
Next, play through a clip from one of the other cameras (in the Viewer window) and find that same cue point and add a marker. Drag the clip to track V2 and line up the markers on both clips. You may need to zoom in on the Timeline to get it lined up exactly. Playback a section of the Timeline just to make sure the clips are in sync with each other. Adjust the clip on V2 as needed. Repeat that process for the clip from the third camera.
Set the Canvas window for Image+Wireframe mode. Drag a corner of the Wireframe to resize the clip to about 40% to 50% and position it in one corner. Do the same thing for the clip in V2. You can get the same result by loading each clip into the Viewer window and using the Motion tab's Basic Motion controls (Scale and Center). You should now have a double picture-in-picture effect so you can see all 3 cameras at the same time. Depending on your system's resources, you may have to adjust the RT settings for playback ... or render.
As you playback the Timeline, cut and delete the portions of the clips on V2 and V3 that you do not want to keep. When you're finished cutting, select all clips remaining on V2 and V3, right-click on one and choose "Remove Attributes" from the contextual menu, then click Basic Motion. All clips will go back to full size and centered. Add transitions if needed.
Or buy FCP and use the Multi-clip editing feature.
-DH -
How can I adjust video from two cameras that are out of sync?
Hi - I've just recorded someone speaking on two cameras with the intention of cutting clips in from the second camera while using the video and soundtrack from the main camera, however the two video files are out of sync by half a second or so by the end. How can I 'stretch' the shorter clip so they coincide properly? Thanks, David.
David
What version of Premiere Elements are you using and on what computer operating system is it running?
Typically, select the clip,
as you hold down the Alt key of the computer main keyboard, tap the left or right arrow key once. Each tap = 1 frame nudge.
as you hold down the Shift+Alt keys of the computer main keyboard, tap the left or right arrow key once. Each tap = 5 frames nudge.
If you are working with audio editing, consider Edit Menu/Project Settings/General with Audio Display Format = Milliseconds.
Please let us know if any of the above worked for you.
Thank you.
ATR -
Audio out-of-sync in Vimeo Flash player in Firefox
I sometimes get reports that videos in Vimeo's Flash player play slightly out of sync in Firefox, but not in other browsers (even with the same version of Flash installed). I've contacted Adobe about this issue as well, but wanted to check if there were any known interactions between Firefox / Adobe Flash that could cause out-of-sync video?
You can advice them to check for problems with current Flash plugin versions and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in Flash 11.3 and later
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting -
Why is my audio is out of sync with my video on hd capture from sony camera
My System
Win 7 64 Bit
Asus P5Q-E Motherboard
4 GIGS DDR Patriot Ram
Pentium quad 2.8
Ati Video Card
Onboard Audio
CS3 Premiere And Encore
I have a Sony HVR Z series HD camera from sony. I will capture a tape and it will be out of sync. I will then recapture and it may be in sync or not, this is really frustrating especially for music videos and weddings, actually a nightmare. I'm not quite sure as to the reason as it happens in Adobe Premiere cs3 and cs4. I have updated everything. Do you thing I need a 10000 RPM os system drive. Any help would be appreciated.
JoanI have 2 Sony HDR FX1 and 1 Sony HVR Z1U and it works great in both CS3 & CS4 so something is wrong with your setup or camera.
I only have a 7200 SATA drive for capture.
I dont know if a bad cable would cause this.
Harm has a couple other ways to capture that he says it keeps the audio in sync better but I have yet tried it but im sure from what I have read here that it works good.
Here is a link to his Tools Article.
http://forums.adobe.com/thread/504907
Here are those 2 capture ways:
Capture
Scenalyzer: http://www.scenalyzer.com/main.html for capturing SD material
HDVSplit: http://strony.aster.pl/paviko/hdvsplit.htm for capturing HDV material
Hope this helps: Glenn
EDIT:
I have an 5 year old system.
On Bills PPBM4 test you can see that I scored second to LAST on speed so even my system can capture fine.
http://ppbm4.com/Benchmark.html
Take the test and see how your system is running. It doesnt take to long.
Glenn
Maybe you are looking for
-
RetainSameConnection performance ?
I am inserting millions of rows into a table with a package called ETL1. Takes about 30-50 minutes usually. There are other ETL jobs that also READ this table or insert rows into it. ETL1 uses RetainSameConnection = TRUE to connect to table. I have N
-
How to locate the (physical) z index of encoder
Hello, I am trying to locate the Z-Index of a rotary encoder. I need the counter to reset to 0 everytime the encoder's shaft reaches that same point. My problem is that when I run the VI, the angular position starts at 0 no matter where the shaft is
-
KT6 Delta - Core Centre seems to have broken it!
My spec is as follows KT6 Delta motherboard AMD Athlon XP2600+ Crucial DDR400 3200 512MB Ram 160GB SATA hard drive Radeon 9700PRO Windows XP Home The machine has been running absolutely fine for months until I foolishly decided to press the auto butt
-
I have gone through about 1000 photos and batch renamed them. During this process I made sure that the "Preserve File Name" check box was turned on. My ultimate goal is to somehow take the preserved file name and put it into a normal metadata field (
-
Don't have permissions on my own Mac?
Hi folks.. I would appreciate a little help here. I just did a complete fresh instal of Snow Leapoard on my Macbook Pro. It is virgin clean with an empty drive and there is only one account, mine as the only administrator. Yet it seems that I do not