Z10 camera not focusing,not ringing at times and randomly calling out

I'm having issues with my camera not focusing, just started yesterday, also at times incoming calls will not ring and go directly to voice mail, and randomly calling someone with out showing it called

1. Auto-focus is available alongside touch to focus, which is enabled by dragging the UI target to where you want to focus . Read More Here :- http://crackberry.com/feature-focus-blackberry-z10-camera
2. Z10 has a feature that makes the Call Silent if you touch on Screen , Have you noticed that maybe you mistakenly touch the Screen .
Regards Eree - Follow me on Twitter - Facebook - Google+
For More visit My Blog

Similar Messages

  • My FaceTime isn't working properly. Every call I make a black dot appears on the camera in the middle (fixed onto the screen, and is not dirt), and the calls always fail. It would ring 6 times and then say call failed. How can I fix this?

    My FaceTime isn't working properly. Every call I make a black dot appears on the camera in the middle (fixed onto the screen, and is not dirt), and the calls always fail. It would ring 6 times and then say call failed. How can I fix this?

    If FaceTime ever worked properly for you, restarting your modem (and separate router/wireless if you have such) may help.  If the problem continues, try connecting at a different location to see if the problem is within your wi-fi.
    The black dot problem may mean you need to reset your iPod.  If that does not help, it may need service by an Apple Authorized Service Provider.
    If you need help with any of these suggestions, detailed help on each topic is available via Apple's Support pages:
      http://www.apple.com/support/ipodtouch/
    Message was edited by: EZ Jim
    Mac OSX 10.7.3

  • Existing Apple ID is not longer working with Face Time and Message on the iPhone after iOS 6

    After the IOS 6 update on my iPhone the Apple ID is not longer working with Face Time and Message. Each time I try to log in I receive the message that the password or the user is not right. But they are, because on all other devices and all other parts of the iPhone (iCloud, AppStore, iTunes) they are working. Other Apple IDs are working fine.
    What's wrong? Any idea?
    Thanks

    Blue
    It sounds like you restored from an old back-up.  Did you back-up just before your software update?  It will use your last one and if your last back-up was a ywear old then it will use that one.
    In general, if you are getting these messages on your iPhones select logout (when you get that Apple Id request) and then log back in with your newer ID.
    Sorry for your losses.
    Cheers

  • After update to OS4.2.1 I can not get the ringer to work for incoming calls

    after update to OS4.2.1 I can not get the ringer to work for incoming calls. If I set Vibrate on, that's the only notification I get. Tried everything including blowing away ALL my apps and restoring phone to new. Lost all my apps but the ringer still won't ring

    God Bless u! LOL I have an otterbox case on my phone and had no clue that the mute button was there....Thank you so much!! The volume on my movies & everything else worked...even when I would go into "settings" and adjust the volume of the ringtone. I knew it was something simple...Thanks again..

  • When I plug my shuffle in, it blinks yellow several times and then goes out. It wont charge

    When I plug my shuffle in, it will blink yellow several times and then go out. It wont charge. I do not see this as a "warning" light in the PDF handbook. Any suggestions?

    Hi aaliyafrommarkham,
    In order to troubleshoot this, I would recommend that you start with an SMC reset. Information on this procedure can be found here:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • E71 Camera Auto Focus Not Working

    Dear Sir/Madam, Please help me out of this confusion. I wanted to know whether E71 model have Auto Focus feature in Camera, if yes the my mobile don't have that one. I recently purchased this model  just 4 months before and the camera quality is not good also.

    Hi Joshymathew
    How about pressing the "T" key?
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Download of Elements 10 upgrade will not start.  Tried several times and ways.

    Download of the upgrade to Elements 10 does not start at all.

    Try uninstalling the app, reinstalling it again, and upgrading that one. That works for me a lot of times, and for a variety of (legal, I can assure you) reasons we have two or even three different versions of eight different Adobe apps running on different computers. Re-install is something I used to try after four (or 30!  Lol) hours of various fixes. Now I do it first and often do not need to try a second or third alternative fix.
    We are textbook publishers. Hence the multiple copies :) http://www.AgainstTheClock.com

  • TS1425 ipod nano won't synch, i plugged it in to computer after not synching for a long time and it wouldn't install a new driver and now itunes doesn't even recognize it when i plug it in

    ipod nano won't synch, i haven't purchased anything in a long time and haven't synched with the computer just charged on car charger. when i plugged the nano in it tried to install a driver and that failed and now the computer and itunes won't even recognize that the nano is plugged in.

    REPOST (this solved my problem!!)
    originally posted by shootme78
    "The device manager just needed to be prompted to use the driver for an Apple Mobile Device instead. The Apple driver was already in my PC - I just had to prompt the device manager to use it instead of the camera driver it kept installing. Here's what I did:
    I right-clicked the iPhone in Device Manager and chose Update Driver (for me, the iPhone was showing up in the Device Manager under Imaging Devices).
    I selected "Install from a list or specific location (Advanced)" and clicked Next.
    I chose "Don't search. I will choose the driver to install" and clicked Next.
    In the next window there were 2 drivers to choose from: the "Digital Still Camera" driver that my PC kept thinking the iPhone was, and Apple Mobile Device USB Driver. I selected the Apple Mobile Device driver.
    The driver installed, and at that point iTunes 9.2 could finally detect the iPhone. Yay!"
    if you still confused, this is the real post by shootme78
    https://discussions.apple.com/message/11761418#11761418?messageID=11761418
    this solution worked with every itunes version
    * i tried this on itunes 10.6.3.25
    Hope this will also solve your problem

  • Not working anything not charging no conection with pc and if call me the tell that i am not answering

    Not working anything not charging no conection with pc and if somebody calls me it tells that i am not answering
    That thing that just happended whith my iphone and now i can not do anything whith my iphone it just turned off

    Yes, you got the phone which was currently eligible for Early Edge at the time. This changes from time to time. When the iPhone 6/6+ was first released those were the ONLY phones you could purchase on Early Edge. This was for September and October of 2014. You would not have been able to purchase any other phone with Early Edge at the time. At the time, this made a lot of android phone owners angry, just as it is making the OP(an iPhone owner) angry now. Then it was the Droid Turbo ONLY, then it was....
    One of the requisites AS LISTED ON THE EDGE PAGE is that your line must be eligible for an upgrade. Verizon lifts this requirement IF you want to purchase a specific phone. If the phone you want is not eligible for Early Edge at this moment, it may be at some point in the future and the phone CURRENTLY available may NOT be available for Early Edge. You were able to get the phone you wanted on Early Edge because it was the phone(or one of the phones) eligible at the time for Early Edge.
    Verizon does not have a link for Early Edge because it is not always available AND the eligible phones change from time to time. This is no different than any other special they occasionally run.
    Regardless, since a link WAS given for Edge which DOES list upgrade eligibility as being a requirement, if someone DOES NOT fulfill that requirement it is not out of the question that other portions of Edge may be different, too, such as what you posted "All Verizon Wireless smartphones, tablets and basic phones are eligible for Verizon Edge." If Verizon relaxes a requirement to enter into Edge, why is it so hard to fathom they may ALSO change something else such as which phones are eligible???
    The fact that the OP IS NOT able to purchase an iPhone on Early Edge simply reinforces this fact.

  • HT1766 I loaded the software fix for face time and it wiped out my contacts and photos. can I restore them?

    I loaded the software fix for face time and in loading the new software I lost all of my other content (WITHOUT ANY WARNING). This included my contacts, photos, music. The music I can restore and losing the contacts is an inconvenience, but losing the photos is devastating.
    Any ideas?

    What software fix for FaceTime? What software did you apply?
    Did you backup your iPhone before you updated it with whatever update you applied as described in HT1766? If so, did you backup to iCloud or iTunes? Either way your  data should be restorable from that backup.

  • Call time and lifetime call question

    Hi all,
    I have just purchased a new Iphone 4, i noticed after 1 week that the call time is 3hr 18mins and the lifetime call timer is also 3hr 18mins. I have only used about 1hr of call time (both inward and outward calls) so why is this saying 3hr + when it should be about 1hr ?? is "data" time included in this ?? my wife got n iphone the same day and hers is on 1hr 7mins and she has used hers more than mine.
    Cheers Bill.

    How is your iPhone's display different?
    You can check the model number by  going to Settings/General/About. These are the model numbers for the various 3 GS models;
    MB715LL/A (16 GB Black), MB716LL/A (16 GB White), MB717LL/A (32 GB Black), MB718LL/A (32 GB White), MC555LL/A (8GB)

  • HT1222 my little sister typed my password on my phone too many times and locked me out of my iphone, how do i get my phone un-disabled?

    My little sister typed my password too many times and disabled my phone. now i am locked out of it. how can i get back in?

    You will need to restore your iPhone from the same computer that you most recently synced to.
    Read this: http://support.apple.com/kb/ht1212
    If you can't do the restore then you will need to try recovery mode.
    Read this: http://support.apple.com/kb/ht4097

  • IPhone 3Gs camera-auto focus not working; no focus instead

    Just got a new iPhone 3Gs. Wanted to test the camera since I hear it's so much better. The image never focuses. At first a box appears, dead center, like it should, but it doesn't focus. When I tap on the screen a box appears where I tapped, so it's responsive in that respect. But again, doesn't focus there.
    Help! I haven't used it yet -- is there a setting I need to set or something else I need to do (calibrate?) to get it to work?

    Do you have enough light for a photo? Have you tried taking a picture, and seen that it is out of focus (as opposed to fuzzy because you didn't hold it steady enough)? Is the lens clean?

  • Firefox does not load 1/2 the time and in order to open it I have to reboot my computer. Please help, I do not want to use Bing or IE.

    When I click on Firefox to open the browser window nearly 1/2 of the time it never opens. It shows that it is trying to open and then it does not. No matter how many times I click on it it will not open unless I reboot my computer.

    '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
    While you are in safe mode;
    Type '''about:preferences#advanced'''<Enter> in the address bar.
    Under '''Advanced,''' Select '''General.'''
    Look for and turn off '''Use Hardware Acceleration'''.
    Poke around safe web sites. Are there any problems?
    Check for crash reports;
    In the address bar, type '''about:crashes'''<enter>.''' Note:''' If any reports do not
    have '''BP''' in front of the numbers, click it and select '''Submit'''.
    Using your mouse, '''mark''' the most '''resent 7 - 10''' crash reports, and
    '''copy''' them. Now go to the reply box below and '''paste''' them in.

  • HT3702 Tried to make an in-app purchase with new card information and they said purchase could not be made at this time and contact the iTune store for support. Can you tell me why?

    Trying to make an in-app purchase with new account information...purchase would not go thru...told me to contact the iTunes support.

    Nobody on these boards can. Click here and ask the iTunes Store staff for assistance.
    (101541)

Maybe you are looking for

  • How do I get iCloud settings to accept new payment info?

    Last evening at 6:54 I received this notification: On 09/30/2014, we attempted to charge your account for your 20 GB iCloud storage plan, but there is still a problem with your payment information. "No problem," I said to myself, "that's the card we

  • Passing a file from one page to another

    Hello, I have a page in the application, which uploads a file. I need to pass this file to another page, where it's going to be inserted in the table with some other parameters. Is there a way to do it in Apex? for example a temporally table that cou

  • How to use standard IO as char by char device ?

    Hi, I'm looking for an solution to use console entry as character by character device... The default System.in can only be ready after the "enter" key stroke. Is somebody know how to authorize reading every time a key is stroke ? I wish to control us

  • Nokia E90 - Maximum number of connections in use e...

    I invariably get the error - Maximum number of connections in use. Please close open connection - (this is not the exact verbiage of the message) when i connect to the gprs / wap. this started occuring after i updated my firmware from 200.x.x to 210.

  • Dbms_alert package under C++ Daemon

    Hi, I have created a C++ Daemon whihc is using dbms_alert package. When Daemon runs it makes a call dbms_alert.waitone("ALERTNAME","MESSAGE", STATUS); well this is a blocking call as i don;t want to use timeout as 0. Now when i want to stop my Daemon