Z10 camera test using ISO 12233 test page. Results are excellent!

Dear users,
I inspected some family pictures of my Z10 and came to a conclusion that there was something fishy with my camera. The edges and corners of the pictures seemed shaded or blurred.
I've found the following site http://www.gsmarena.com/piccmp.php3?idType=1&idPhone1=5251 reporting a very good Z10 camera --according to the samples on the page; see for yourself, if you please so.
So, I looked up the ISO 12233 photography test chart, printed it out and made some photos myself. I cleaned the camera window, stabilised the camera ca. 50cm from the page (size A4) to fill the screen and shot a couple of pictures. I and was amazed. The photos were fantastic! To catch a glitch I have to find a better printer or an original of the ISO chart. So, from now on I am going to always clean the camera window before shooting
Cheers!

Verry good suggestion, I've noticed before what I thought was bad focusing and then I realized by lense was foggy or dirty! A quick wipe "cleared" that up!
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Stress Test using em console in 11g results in lesser number of instances

Hi All,
We are doing Stress/Load testing using em console in SOA Suite 11g. The problem we are encountering is, em fails to create as many instances as it should. Under "Additional Test Options", we check the "Enable Stress Test" checkbox and give different values for following parameters:
Concurrent Threads     50
Loops per Thread     20
Delay in Milliseconds     1000
But instead of creating 1000 instances of this composite, em console create only 998 and fails to create 2 instances without giving any error in console logs or server logs.
Similarly, with below setting:
Concurrent Threads     50
Loops per Thread     40
Delay in Milliseconds     1000
Instead of creating 2000 instances it creates only 1991 and 9 instances fail without any error. Is this a known bug or we are missing something here? Any pointers will be helpful.
Thanks,
Akash

In case you have multiple instances running, whereas any instance has an unique value started as correlation, when the engine receives the messages for the intermediate receive operation it will be routed without problems to the right instance. In this case, it is not a problem if the engine creates a new composite instance for the intermediate messages.
We have this situation in Production without any problem.
Anyway should be simple to simulate the same situation in your development environment to make sure it works well in your scenario.
Regards
Luis Fernando Heckler

When using Google to search the results are displayed so small I cannot read them. This just started today.

Today when I was searching with Google. The display of the results started getting smaller and smaller, right before my eyes, and I could not stop it, and I was doing nothing, but reading the screen. I cannot find anything to tell me how to get the larger size display back. All the other search engines, such as Bing, Yahoo are displaying correctly. I have always used Google, I like Google, I do not want to change. Please can you help me? I have a screen print available is you need to see it. I tried searching the Google website for help but I couldn't find anything. I installed something called Stylish, thinking that would help, but it did not.

hello, try to press ctrl+0 ('zero') while you're on the page in order to reset the zoom level or in case this doesn't work also go through the other common troubleshooting steps at [[Websites look wrong or appear differently than they should]].

Image won't use full width of page in Standard Report

Using LabVIEW 2012 in both Windows XP and Win7
Specifically, I'm trying to use a cluster control with strings and numerics for a generic report page. I stuff the strings and numerics with the info that's needed to create the desired page content.
I am creating a standard report. The use of Word or Excel is not considered due to compatibility issues when either NI or Microsoft release version upgrades.
I have tried setting the report margins as well as leaving them at default; the results are the same.
I set the header text and footer text to indicate where the report generation function believes the margins to be. Both header and footer honor the margin settings and appear on the report page as they are expected.
When I "append control image to report" using the reference to the cluster control, the resulting image is 6.2" wide and hugs the left margin regardless of what size the control actually is. If the control is widened, it is rescaled to 6.2" wide. I tried using picture and array controls; results are the same. I tried using the "append front panel image to report"; same results. The "Alignment" input seems to have no effect. The issue seems to be with the way images are handled in the report generation.
Oddly enough, the height seems to behave quite normally. If the object is too large in height, it is simply truncated at the bottom margin.
I tried using landscape orientation which functionally exhibits the same issue; object hangs on left margin and will not fill the width of the page.
I tried HTML which centers the image on the page but doesn't honor margins and prints info at top and bottom that I can't get rid of.
I contacted NI support and generated an active support question reference# 7369484. So far, no solution.
Any help would be appreciated!

Similar problem using LV2011. I have to print labels on a 100x70 mm paper without borders. No chance to scale the control image to fit.
Calculating the size of the initial picture (480x360 pixels) scaled at 96 DPI would result in a size of 127x95 mm.
Actually the height printed is exactly this, but the width shrinked to about 45-50 mm.
A part of the solution might be to create an image (use 'create/invoke node/get image') and send this to the printer (how to do this?). Actually the HTML report creates an 96 DPI image together with the html page.
In my case I should create an image of at least 150 DPI (300 or 600 DPI prefered). But there are no options in either the 'get image' or append control image to standard report to set the resolution.
Bad thing!
Attachments:
CT0181860494.jpg ‏26 KB

Not able to spy objects in ie9 using coded UI Test Builder Spy, giving exception -Interface not registered(Exception from HRESULT:0X....

Not able to spy objects in ie9 using coded UI Test Builder Spy, giving exception - "Interface not registered(Exception from HRESULT:0X...."
I am not able to capture any objects of my web application using coded ui recorder. Even though it is a simple html page, coded ui is showing a message -"Interface not registered(Exception from HRESULT:0X...."
Please give me solution , why this is hapening. I am having problem with object identification. Even I am not able to identify any object in google.com.
swapnanil sengupta

TechnologyName is displaying as "MSAA" . But my application is a Webapplication.If I try to spy the google .com's search field then also TechnologyName is displaying as "MSAA". Is it any configuration issue of vsts codedui.
swapnanil sengupta

Safari won't open pictures on imgur. To test used another browser and it showed them

Safari won't open pictures on imgur. To test used another browser and it showed them
Here is the page was trying to surf http://imgur.com/gallery/n9Bjm

From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.

SSMS 2012:FOR XML PATH Using XPath Node Tests-Columnn name 'test()' contains an invalid XML identifier as required by FOR XML?

Hi all,
I am learning XPATH and XQUERY from the Book "Pro T-SQL 2008 Programmer's Guide" written by Michael Coles, (published by apress). I copied the Code Listing 12-8 FOR XML PATH Using XPath Node Tests (listed below) and executed it in my
SQL Server 2012 Management Studio:
--Coles12_8.sql // saved in C:/Documemnts/SQL Server Management Studio
-- Coles Listing 12-8 FOR XML PATH Using XPATH Node Tests
-- Retrieving Name and E-mail Addresses with FOR XML PATH in AdvantureWorks
-- 16 March 2015 0935 AM
USE AdventureWorks;
GO
SELECT
p.NameStyle AS "processing-instruction(nameStyle)",
p.BusinessEntityID AS "Person/@ID",
p.ModifiedDate AS "comment()",
pp.PhoneNumber AS "test()",
FirstName AS "Person/Name/First",
MiddleName AS "Person/Name/Middle",
LastName AS "Person/Name/Last",
EmailAddress AS "Person/Email"
FROM Person.Person p
INNER JOIN Person.EmailAddress e
ON p.BusinessEntityID = e.BusinessEntityID
INNER JOIN Person.PersonPhone pp
ON p.BusinessEntityID = pp.BusinessEntityID
FOR XML PATH;
I got the following error message:
Msg 6850, Level 16, State 1, Line 2
Column name 'test()' contains an invalid XML identifier as required by FOR XML; '('(0x0028) is the first character at fault.
I have no ideas why I got this error message. Please kindly help and advise me how to resolve this error.
Thanks in advance, Scott Chang

Hi Michelle, Thanks for your nice response.
I corrected the mistake and executed the revised code. It worked nicely.
I just have one question to ask you about the appearance of the xml output of my Co;les12_8.sql:
<row>
<?nameStyle 0?>
<Person ID="1" />
697-555-0142<Person><Name><First>Ken</First><Middle>J</Middle><Last>Sánchez</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="2" />
819-555-0175<Person><Name><First>Terri</First><Middle>Lee</Middle><Last>Duffy</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="3" />
212-555-0187<Person><Name><First>Roberto</First><Last>Tamburello</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="4" />
612-555-0100<Person><Name><First>Rob</First><Last>Walters</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="5" />
849-555-0139<Person><Name><First>Gail</First><Middle>A</Middle><Last>Erickson</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="6" />
122-555-0189<Person><Name><First>Jossef</First><Middle>H</Middle><Last>Goldberg</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="7" />
181-555-0156<Person><Name><First>Dylan</First><Middle>A</Middle><Last>Miller</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="8" />
815-555-0138<Person><Name><First>Diane</First><Middle>L</Middle><Last>Margheim</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="9" />
185-555-0186<Person><Name><First>Gigi</First><Middle>N</Middle><Last>Matthew</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="10" />
330-555-2568<Person><Name><First>Michael</First><Last>Raheem</Last></Name><Email>[email protected]</Email></Person></row>
<row>
<?nameStyle 0?>
<Person ID="11" />
719-555-0181<Person><Name><First>Ovidiu</First><Middle>V</Middle><Last>Cracium</Last></Name><Email>[email protected]</Email></Person></row>
<row>
I feel this xml output is not like the regular xml output. Do you know why it is diffrent from the regular xml xml output? Please comment on this matter.
Thanks,
Scott Chang
What do you mean by regular xml document? Are you referring to fact that its missing a root element? if yes it can be added as below
USE AdventureWorks;
GO
SELECT
p.NameStyle AS "processing-instruction(nameStyle)",
p.BusinessEntityID AS "Person/@ID",
p.ModifiedDate AS "comment()",
pp.PhoneNumber AS "text()",
FirstName AS "Person/Name/First",
MiddleName AS "Person/Name/Middle",
LastName AS "Person/Name/Last",
EmailAddress AS "Person/Email"
FROM Person.Person p
INNER JOIN Person.EmailAddress e
ON p.BusinessEntityID = e.BusinessEntityID
INNER JOIN Person.PersonPhone pp
ON p.BusinessEntityID = pp.BusinessEntityID
FOR XML PATH('ElementName'),ROOT('RootName');
replace ElementName and RootName with whatever name you need to set for element as well as the root element
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

HP Photosmart C4585 - can't print test pages + copies are all reduced in size

I have 2 problems with an HP Photosmart C4585 All-in-one printer.
Firstly, I cannot print test prints ie 'Network Configuration Page' and the 'Run Wireless Network Test' page. It sounds as though it's printing but it produces blank sheets.
Secondly, trying to Copy A4 originals to A4 paper the printout is always reduced in size to about a quarter of the sheet (more like photo size) - no matter which setting I select. It's also printed blue.
The printer is not connected to a computer but I successfully print A4 documents in black, from an iPad using the HP ePrint app. So it is just the copy facility which is malfunctioning.
Can anyone help? Thanks.

Hi there,
Lets eliminate software interference by downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

How do I use Apple Hardware Test on a Mid 2010 macbook pro?

This MacBook is now running Mavericks 10.9.1
This makes it so I can't update the firmware to use Apple Hardware Test within OS X internet recovery as discussed in this article:
http://support.apple.com/kb/ht4904
Holding down "D" at boot does nothing
Holding down Option + D gives me Apple Hardware Test that can't be run because the firmware isn't updated and can't be updated because the update can only be applied to systems running Mac OS X 10.7.2

You need the origional grey disk 2 that came with the mac when new. It contains the AHT and applications. You can call Apple and order the disks.

Test: Using Crop marks in indesign CS4 with Epson 3800 Mac 10.5.7

Jun 19, 2009 9:35 PM
Crop marks using indesign CS4 with Epson 3800 Mac 10.5.7
My crop marks and pages are printing larger than my document sizes. My paper size is 13x19, so I should have crop marks at the exact corners of the page sizes. But indesign is printing the entire document larger. So my document which is 11x14.75 is now printing 11.25x15.5. All my settings are correct. So, is anyone else using an Epson 3800 with CS4 indesign having issues such as the above? And can I ask (beg) a few of you to do a test print with crop marks and let me know the results?
My workflow has been completely stalled because I can't get my pages to print the right sizes with the crop marks at the right measurements. I'm printing a photo portfolio on the Lumijet double sided paper and "when" it did work awhile back sometime several months ago, the finals looked great. I've already reinstalled both the Epson 3800 driver and the Indesign CS4 software, but the results are still the same.
So, here are my settings:
document size: 11x14.75
in the print panel:
Printer: Epson 3800
Setup: Paper size: Super A3/B13x19, scale 100% width & height, page position Centered
Marks & Bleed: Marks: "Crop Marks" checked. offset: 0, weight: .25, Bleed and Slug: Use Document bleed settings, include slug area. The bleed is 0 for top, bottom, left and right
Color Management: Document profile: Adobe RGB, Options: Indesign handles colors, Printer Profile: (A custom made profile using Xrite for the 3800 with Lumijet paper)
The settings on the Epson 3800
Epson 3800 Printer
Presets (set for the profile mentioned above)
No Color management
Sometimes, on a whim, the printer and indesign cooperate together like good little children should. But not often. And I can not conclude why they are nice to each other sometimes, but given the same detailed data at other times, they fight.
If anyone could run through a similar process using indesign with a photo layout and setting up the printer settings for both the Epson 3800 and in the indesign program and let me know their results, I would value your conclusions very much. You don't even have to waste paper or ink. Finally, after wasting so many pages of paper and of ink. I deleted the photos from the page, and printed it blank with only the crop marks for me to measure if it was coming out right or not.
Thank you for any response. And feel free to call me if you want to vent about Epson 3800's or about Indesign CS4 anytime! I'm up late.... 646 256 8853.
Thaddeus

I specified the paper size as strictly 13x19, no boarderless, no retain size. Same problem. I also did as you suggested below. The pdf document does remain true to the document. As a pdf doc. I changed the color mgmt to Adobe rgb 1998. It looks okay, but not as lively as I get when printing correctly with my color mgmt working and in sync.
Your final question about simply using photoshop. Well... I might go back to it and give up on Indesign if this is the case that it won't simply crop my documents to the sizes that I input them to be cropped as. But, I am using Indesign so that I can create a page layout that I can't do in Photoshop. My folio is about 25 or more pages with double page spreads. I am printing on a two-sided Lumijet paper and my folio was custom designed to be cut out at 11x14.75. If and when it is printed correctly, I am printing on both sides of the paper and trimming it to exact size.
It sounds as if you have exhausted the potential problems and don't have a clear explanation for why the doc isn't printing correctly in Indesign either with the color mgmt. or the document sizes. I'll try one more print using a different color profile similar enough to get at minimum, an okay print. If it doesn't print at least okay, then it isn't most likely my profile..... Okay done. Crazy. The color is inaccurate, but for some reason or another, the document size printed correctly. It measured exactly 11x14.75. What I have done during this period of time is:
First) I did as you suggested and turned the Print to Adobe PDF 9 and created a print there. I measured it and it did measure correctly. I didn't love the color, but... at least it is measuring correctly.
Second) I turned the Printer back to Epson 3800 (I'm beginning to think that this simple gesture was what caused the printer to print correctly) I didn't change any settings, but I did make sure that they were set correctly as before. The paper size was set to 13x19. When I make sure this setting is right in the "printer" dialogue for the Epson 3800, and then switch back to ID, the printer dialogue in Id changes to "Define by Printer." But I changed nothing, other than the profile to an older one that I used before. The color is still inaccurate, but at least for two prints just now back to back, the measurements were correct. What to do? Lol.
Thanks again for all of your time spent trying to resolve this issue.
Sincerely,
Thaddeus

How to use C:when test... inside column in ADF table

I am using ADF table with below two columns
in First column i have to check the Type of document if it is doc type then i have to use commondlink to download that file ,Otherwise i need to show only text.
for that i added
*<c:when test="{boolean($favoriteType eq 'doc')}">*
which is not working .
please let me know how to use <C:when test... inside column in ADF table
<tr:column sortProperty="favoriteName" sortable="true"
headerText="#{res['favorite.favoritename']}"
width="500" noWrap="false">
<c:choose>
*<c:when test="{boolean($favoriteType eq 'doc')}">*
<tr:commandLink actionListener="#{bindings.downloadFile.execute}"
text="#{row.favoriteName}"
disabled="#{!bindings.downloadFile.enabled}"/>
</c:when>
<c:otherwise>
<af:outputText value="#{row.favoriteName}"/>
</c:otherwise>
</c:choose>
</tr:column>
<tr:column sortProperty="favoriteType" sortable="true"
headerText="#{res['favorite.favoriteType']}" rendered="true">
<af:outputText value="#{row.favoriteType}" id="favoriteType"/>
</tr:column>

Hi Frank,
Thanks it is working like cham..
related to same page i am facing new problem which i posted at below thread
How to get row data runtime @ trinidad table , set rowSelection="multiple"
can u reply on same.
Thanks for all help.
Jaydeep

DW CS3: test connection works, but local pages won't upload.

My MacBook Pro died, can'taccess files or apps and I don't have the CS3 install disks, so I moved DW over from my Mac Pro.The test connection works, but local pages won't upload.I re-entered all the site info, confirmed I ahd all the correct FTP settings from my sertver tech guys. I even created a new site duplicating all the original info. BTW I have ALWAYS had this problem on the Mac Pro...Never been able to upload from that computer. All the other apps in CS3 work fine.
jackhatfield

FileZilla worked. Thanks so much. Still wish I could figure out why
Dreamweaver won¹t transfer files, it would be easier than editing in DW and
then having to use Filezilla to transfer them. DW never transferred files on
the Mac Pro I had it installed on either (that¹s where I got it from when I
moved apps to my new MacBook Pro).
jack

Can I automate tests using OATS?

I'd like to automate performance load test using OATS in our daily regression test. Can I invoke (start) load test using script? and how can I collect the test result in certain format so I can parse and compare with base result to determine whether there is a regression or not?
We use Jenkins testing framework.
Thanks,
-Shaun

And to see the extent of AppleScript support, open the /Applications/Utilities folder and single-click the AppleScript Editor to launch it.
Select File > Open Dictionary...
A scrollable selection of scriptable applications becomes viewable as the following image shows. You click on the particular application (e.g. Pages) to reveal the specific application's scriptable descriptions. In addition to the Apple Support Community, you can visit macscripter dot net for AppleScript solution examples. Another useful site is apple dot stackexchange dot com/questions/tagged/applescript.

Unable to capture the Citrix network response time using OATS Load testing.

Unable to capture the Citrix network response time using OATS Load testing. Here is the scenario " in our project users logs into Citrix network and select the Hyperion application and does the Transaction and the Clients wants us to simulate the same scenario for load testing. We have scripted starting from Citrix Login and then launching Hyperion application. But the time taken to launch the Hyperion Application from Citrix network has not been captured whereas Hyperion Transaction time have been recorded. Can any help to resolve this issue ASAP?

Hi keerthi,
1. I have pasted the code for the first issue
web
                         .button(
                                   122,
                                   "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1824fhkchs_6']/web:form[@id='pt1:_UISform1' or @name='pt1:_UISform1' or @index='0']/web:button[@id='pt1:MA:0:n1:1:pt1:qryId1::search' or @value='Search' or @index='3']")
                         .click();
                    adf
                    .table(
                              "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1c9nk1ryzv_6']/web:ADFTable[@absoluteLocator='pt1:MA:n1:pt1:pnlcltn:resId1']")
                    .columnSort("Ascending", "Name" );
     }

HT201257 hardware test using an external optic device (iMac) on macbook pro 9 years old via firewire. What to do? and how to do it?

hardware test using an external optical device (iMac) on macbook pro 9 years old via firewire. What to do? and how to do it?
I thiunk the graphic card is defective and need to run hwt

You don't.
Need a internal optical drive and the Hardware Test on disks is old and outdated anyway.
Your machine has lasted a long time, congratulations, they usually only last about 4-5 years.
They get clogged up with dust and overheat, kills the video card, there is nothing you can do as it's hardware damage over time.

Z10 camera test using ISO 12233 test page. Results are excellent!

Similar Messages

Maybe you are looking for