Z10 - disturbance in call and others cannot listen my voice

All new Z10 has problem of lots of disturbance during call and the other person cnnot listen my voice. I have tried evrything possible reading from self help but nothing worked.
After searching the internet I have read several persons have this problem. After reading from their posts I tried using speaker and handsfree and that worked to some extend, but through headset nothing can be heard.

Please help if any knows solution of this problem

Similar Messages

  • My Lumia Icon goes dark during calls and I cannot access the phone pad to unless I hit the power button.

    My Lumia Icon goes dark during calls and I cannot access the phone pad to unless I hit the power button.  Because of this it makes it tough to put my phone on speaker or type in my v-mail password.

    I've been trying to find a common denominator. It happens inconsistently. It never happened before the Denim update. When it does occur, the screen goes black immediately upon answering the call and doesn't come back until the call is ended by the calling party.
    I thought it might be the proximity sensor, but when it's working normally I can see the screen go dark when it's at my ear and comes back when I take it away (tried it multiple times). I had Gestures Beta installed. I wondered if that could have an affect so I uninstalled it, but that didn't make any difference. I'm still stumped by the inconsistency. I haven't reset my phone as I didn't really want to go through that...

  • I have problem with my mic when i make call the others cannot hear me but the mic is ok

    i have problem with my mic when i make call the others cannot hear me but the mic is ok i checked it out and it works dont know what to do help me !!

    Hello Sabbir Khan,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Can't hear through the receiver or through speaker, and can't be heard
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Best of luck,
    Mario

  • Updated player and now cannot listen to internet radio stations - why ?

    Updated to 14.0.0.145 the other day and now cannot listen to internet radio stations that worked fine before updating ( WABC , WMAL , KSFO ) . Programs won't download . WMAL's podcast does work , though . No trouble with Youtube , etc...
    I have Windows 7 and IE 10 .
    Can anybody help ?
    Thanks in advance .

    Each updated version of Flash Player includes important security updates.  You really want to be running the latest version of Flash Player.
    I'm also able to play these streams with no problem.  Have you rebooted since you upgraded?  It's always a good first step for mysterious problems. 
    If that doesn't work, I'd Uninstall Flash Player | Windows and then do a fresh install from http://get.adobe.com/flashplayer before considering downgrading.  That's an unwise course of action.

  • Some of my songs and TV shows have a circle with a square in it next to them and are darken and I cannot listen to or watch these items. What's going on and how do I fix it?

    Some of my songs and TV shows have a circle with a square in it next to them and are darken and I cannot listen to or watch these items. What's going on and how do I fix it?

    Try resetting you phone by holding the power and home buttons at the same time until you see the Apple logo, then release.  If no change you might need to try syncing all your music and TV shows off your iPhone, then sync them back on (be sure they are in your iTunes library before doing so).

  • The sound on my ipad3 has become very distorted and I cannot listen to anything requiring sound.  The ipad3 is workeing normally other than the sound.

    can anyone help please, turned on my ipad 3 and wanted to listen tomusic,but for some reason the sound has become distorted and impossible to hear music.  it was working ok until today, I dont know why it has all gone distorted.  help anyone please.  Thank you,  Marian.

    Is it on mute? What IOS do you have?
    IOS 7.0+: open control center (swipe from under to top) and tap on the bell.
    Or, if it has the lock button instead if the bell, switch the switch on your iPad to unmute / mute
    IOS 6 and under: Go to settings>General> USE SIDE SWITCH TO and click mute.
    Then switch the switch. You're unmuted.
    If it still doesn't work, go to a repair shop or apple so they can change the speakers of your iPad.
       ~sincerely,
    Ab

  • What happened to the sound on incoming phone calls and other notifications???

    I have my sound on "Loud (Active)" as I always do and then all of the sudden it stops making any sounds or chimes when I receive calls, emails, texts or facebook notifications.   My calls and ect. are still coming thru, but just completely silent.  I have to look at my screen to see I have a call coming thru and wait for the little red light at the top to see if I have any text messages and whatnot.   Does anyone know why this could be happening?  Now during the workday I will probably end up missing important phone calls and playing phone tag with people. 
    Any help would be appreciated

    I have the same problem, the only thing by me is its on and off could be a few days that it should work and then all of the sudden it stops

  • Multiple users on a Bridge network. Some of us can see keywords and others cannot.

    We have multiple users on Bridge. We set up a cache connected to our server that has tons of photos on it. When we type in a keyword, some of us can see it on our Bridge on our computers but others cannot. How can we all be in sync with our searching?
    Is it a connection problem? Any feedback is appreciated.
    Thanks!

    Curt
    how do you know if your using the
    Central cache all distributed cache ?
    and are they both stored in the same place ?

  • HT201974 why are some devices connection to the new extreme and others cannot?

    I just bought a new extreme after reading some great reviews. But I am experiencing something that makes no sense. I have iPads, iPhones, Roku, Directv and others all usinging WiFi and all but one of the ipads (may be defected as I am bringing it in to apple today) and the directv will connect to my network.
    I even tested my already connected devices by "forgetting" the network and restablishing them and they work without fail.
    I bought 3 new iPad Air's and 2 connected no problem. The Roku... no problem. Playstation too.
    The Direct Tv wifi was connected to the old extreme and worked but now it says, "security code not accepted" yet Iit's the correct code. Also 1 of the 3 iPad air's will not connect either. I did a reboot in recovery mode and reinstalled the IOS and still nothing. I reset the network and still nothing.
    Can anyone help? Thanks!

    You should manually set the the IP address and address mask in each device/system on your network.
    WiFi hotspots will randomly change IP address on everything when you use DHCP inside your NAT network, which is the default.
    All of your devices normally use DHCP on your AirPort network to lease an IP address which will expire, and the IP address can change each time a new lease is created. This happens automatically unless you do something to override this feature.
    Network gaming systems and Internet phones often stores the addresses from inside your network at the remote end, which will be wrong after DHCP in your AirPort changes the IP address of all of your equipment at your end. You need to sign out/in from each service or re-install to establish a connection after the address changes. The DHCP lease duration default is 7 days.
    You can prevent that problem by assigning fixed IP addresses to the equipment inside your network.
    You use the AirPort utility to examine the DHCP address range, then select addresses just above the ones DHCP is using. DHCP in AirPort equipment usually uses 10.0.1.1 to 10.0.1.199.
    The addresses you need will probably be 10.0.1.201, 10.0.1.202, 10.0.1.203, ... (use a different address for each different device). The address mask will probably be 255.255.255.0 (this is the same for everything).
    Best of luck.

  • I make calls and people cannot hear me. what do I ...

    HELP.  People cannot hear me and I am in the middle of a big project and I need to be ablke to make calls.   What do I do?

    It's hard to tell you what the problem may be based off what little info you provided.  The issue can be driver related or maybe your upload speed is to slow, so people can't "hear" you.  You should try to do the Skype echo test and see if you can hear yourself.  To change things up, try another mic.  You never know if your trusty mic is failing.  Something in your audio settings like mic boost, etc. may be causing the issue.  If you are using a 3.5mm jack mic, try something like a USB-based headset or a converter from 3.5mm jack to USB. 

  • I can not access local pics on my z10 via BlackBerry express and other apps that can share pics.

    While sharing or editing or using pics on apps such as BlackBerry express Whatsapp bbm etc,I cannot access local pictures. When I tap on add picture or share picture, the light gets dim for a second so as to open gallery but nothing happens then. My z10 is running on bb 10.2.1.3062

    In Disk Utility, you should see an icon in the drive list representing the external drive. Below that is an icon for each volume on the drive. One of those is the Time Machine backup volume. If there are no others, then there is no other data on the drive, at least none that you can get to.

  • My audiobooks sound distorted and I cannot listen to them - the voice echoes

    Hi - I recently purchased a few audiobooks onto my ipod nano 6G and they were all fine for a while and suddenly they sound distorted like the voices are echoeing - please can you let me know how I can fix this problem as I really enjoy listening to audiobooks.
    Thank you.
    Erim

    Is it on mute? What IOS do you have?
    IOS 7.0+: open control center (swipe from under to top) and tap on the bell.
    Or, if it has the lock button instead if the bell, switch the switch on your iPad to unmute / mute
    IOS 6 and under: Go to settings>General> USE SIDE SWITCH TO and click mute.
    Then switch the switch. You're unmuted.
    If it still doesn't work, go to a repair shop or apple so they can change the speakers of your iPad.
       ~sincerely,
    Ab

  • Since the latest software update, every third or so time I turn it on, my sounds settings are changed and I cannot listen to anything-music, YouTube, nothing. I can sometimes change something and it will work, but right now nothing is working. Anyone else

    Since latest software update, my sound settings are changing sometimes when I turn on and cannot hear anything. All controls are useless and cannot be activated. After changing several things, I have been able to make it work, but today nothing is working. Anyone else experience this  and have any ideas?

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Curious - why can some see web page and others cannot?

    I've had a couple people tell me that the link that I have provided for my website (a cut and paste of the URL address) doesn't work and the error msg is that the page does not exist.
    Others can view the site just fine.
    I have, until recently, also been able to view my site without issue but I live in China and it is not unusual for there to be sites temporarily blocked from time to time. I have not been able to bring up my site and thought that this was just due to one of these fun times. But the person not able to access the site is in the US.
    So my question is, what other things could bring up an error msg like that? Since it is a cut and past issue, it can't really be a mistyping of the address so looking for any other things that could cause this.
    Thanks!

    Problem sort of solved.
    However, the person who was having difficulty wasn't able to click on the full address URL but when I gave him the shortened version (the version that comes up on iWeb when you are asked if you want to publish it) it was fine. Not really sure why one works and not the other but a solution was at least found.
    Posting this in case anyone else runs into a similar situation.

  • Can I mute incoming calls and still use as a voice recorder

    I need to take notes during meetings and would like to use an iphone as a voice recorder as a back up as well as taking written minutes. Can I put the iphone into a silent mode so that the meeting is not disturbed if I get a call or SMS but still be able to use the voice recorder? I would like to be able to press record at the start of the meeting and just leave it running for the duration.
    Also, if I fully charge the battery before, will the iphone keep recording for 1.5 hours?
    And.. what is the best voice recording app for meetings and lectures/talks?

    Hey
    It sounds like you're looking for airplane mode, which disables the wireless features of your iPhone while still allowing you to use other applications. You can read more about it here:
    iOS: Understanding airplane mode
    http://support.apple.com/kb/HT1355
    Also, the iPhone comes with an application called Voice Memos that lets you use iPhone as a portable recording device. You can read more about it on Page 105 of the iPhone user guide here:
    iPhone User Guide
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf#page=105
    Cheers,
    David

Maybe you are looking for

  • LV 2011 Report Generation Toolkit Constantly asks for 8.6.1 CD

    I am having a strange issue. Its a bit intermittant, so I will try my best to explain when it occurs.  -If I make a new project and run something from the report generation toolkit, I will get an installer from labview 8.6.1. I am running Labview 201

  • Calling a method that returns values in a map - using JSTL

    Hi I have a method within an object that returns a List for a particular category public List<String> getFieldsInCategory(String categoryName){     return _categoryFieldsMap.get(categoryName); //This is a map that returns a list                      

  • Mac Mini core solo 1.5gb snow leopard installation problem.

    Before I tried to install snow leopard I was in the middle of using the restore discs and before I was thinking about it I just turned the computer off when it asked for disc 2. Now I cannot do anything with this computer, turning it on goes to the i

  • No Broadband, No Dial Tone!??

    My broadband went down on Friday. I rang the number that comes up on the browser, BT has done tests on the line and there is no dial tone either so I'm without phone as well! Their estimated date for fixing this is 23:59 on Wednesday!! Does anyone kn

  • Java.io.UTFDataFormatException using WS-I Analyzer

    Hi I'm trying to use WS-I Analyzer on the HTTP Analyzer logs. If the HTTP Analyzer logs contain accented characters I get a Message Box with NullPointerException. If I check the JDeveloper conse I get: java.io.UTFDataFormatException: Codificaci¾n UTF