Z10 E-Mail "Issue" (But Warning)

Someone else can better title this in the long term.
However I mentioned in another thread that e-mails don't sync. With my 8520 and Bold 9000, when I delete or read an e-mail on my phone, it'd delete or be read on the client.
However on z10 it look as though there is a minimum 15 minute interval. I've just received an e-mail read it on my phone. I'll wait 15 minutes to see what happens. I'm not liking this feature.
@BlinkBrian
@BlinkBrian

reconcile can be slow depending on type of service involved
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Similar Messages

  • Z10 E-mail issues

    Good Morning everyone.
    I have had some strange things going on over the last 48 hours on my Z10 and I wonder if anyone has had similar.
    Firstly adding email: The device will not add an e-mail account that I know the settings are correct for. It asks for the account and password and gets through the settings/servers details screen. It then defaults back to the accounts list where the e-mail does not appear. Even after a security wipe I now can not add any accounts on any domain. If it matters, all of the accounts we previously in the BIS for my most recent device.
    Then BlackBerry World has a problem accessing My World. If I want to download an app again I have to pay for it again and when I go into My World and then Apps a pop up says: "Unable to retreive Digital Locker for user: ******"
    I am tempted to go back to BlackBerry Link and try a full reload because the security wipe did nothing but wipe all contacts... or should I try restoring to the day I opened the phone first..... or am I missing something else completely?
    Thanks in advance for any thoughts.

    See if either of these KB article help you:
    Setting up an IMAP GoDaddy hosted email account on a BlackBerry 10 smartphone
    Unable to configure email on BlackBerry 10 or BlackBerry PlayBook due to restrictive mail servers
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Ever since moving to the cloud I have been unable to use the email account on my mac. I have now resolved the incoming mail issue but can't send anything unless I go to the cloud. My mac is too old to operate Lion.

    Can anyone help[ me to reset the mail setting on my mac book. Ever since my move the icloud I can't send or receive mail from my account, only from icloud?
    Many thanks.
    Ian

    Greetings Ian,
    Lion is required for iCloud which is a bit of information they tell you when you do the migration from MobileMe to iCloud: http://support.apple.com/kb/HT4759
    Because you are using an older version of OS X, Mail is attempting to talk to the old MobileMe mail servers when iCloud is on a different set of servers.
    You will have to reconfigure Mail to use the new servers.
    Go to Mail > Preferences > Accounts
    Click on the MobileMe account listed on the left.
    Go to Advanced and remove the check mark for "enable"
    Click the plus sign at the bottom left and add a new account
    Enter in your full @me.com e-mail address and then the password
    Hold down the "option" key on your keyboard and click the "continue" button (this allows you to manually enter e-mail server information)
    For "account type" choose "IMAP"
    Fill in the rest of the fields following http://support.apple.com/kb/HT4864
    Assuming all your information is present and you can send and receive you can return to Mail > Preferences > Accounts and remove the old MobileMe account.
    Hope that helps.

  • I am trying to set up a mail account but I get a warning that my password cannot be sent securely to the server.  how do I correct the problem?

    I am trying to set up a mail account but I get a warning that my password cannot be sent securely to the server.  How do I correct this so that I can set up my email account?

    1. If you haven't tried this already, just delete the user account entirely, and then try setting it up again.
    2. To find the permissions file:
         a. hold down the option key
         b. go to the Go menu in the finder
         c. scroll down to Library and open it
         d. in Library, go to Containers/com.apple.mail/Data/Library/Preferences
         e. drag it to the trash and restart.
    3. if that doesn't work, go to Applications/Utilities/Keychain Access. In the Keychain Access menu, do Keychain First Aid, and repair.
    This should keep you busy for a while.

  • Help: My Mac Book air recently stopped receiving mail.  Mail opens but does not update recent mails.  I see all my mails in my iPhone.  Using Yahoo mail IMAP.  Could it be synchronization issue?  Please help.

    Macbook air not receiving mail

    Greetings Tudo Bom,
    After reviewing your post, I have located an article that can help with Mail issues. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
    Mail: If you can’t receive messages
    Thank you for contributing to Apple Support Communities.
    Best,
    Bobby_D

  • I cannot send from one specific BT Mail account but can access folders using IMAP.

    Thunderbird 31.3.0 on WIndows 8.1 64 bit.
    I have two email accounts configured into Thunderbird.
    Both are BT accounts and have identical configurations.
    IMAP is used for reading mail, SMTP for sending mail.
    On one I can read folders, delete emails from the Bulk Mail folder, fetch and send mail.
    On the other I seem to be able to do everything except send mail.
    I can read mail, delete SPAM, but for some reason not send emails.
    Both accounts are using "mail.btinternet.com" as the IMAP and SMTP server.
    I am using Thunderbird as a back up email client to deal with a very few messages which cause major problems with my main email client which is Windows Live Mail 2012. I have double checked and the mail server details are the same between the two and my WLM client can send emails to the same SMTP server on the same port as Thunderbird fails on.
    I know the password is correct because I can connect over IMAP and delete SPAM using Tbird.
    The only difference that I can see between the two accounts is that one is "@btinternet.com" and the other is "@talk21.com".
    The symptoms - I see the progress bar with "Connected to mail.btinternet.com..." and green all the way across.
    Some time later I get a separate warning saying "Login to server mail.btinternet.com failed".
    Because of the time delay I am assuming that the session has timed out.
    I am also assuming that if the credentials were wrong the rejection would have been immediate (although the delay may be to reduce the effectiveness of brute force attempts to guess the password).
    So I know that the IMAP credentials are O.K. - I can access the mailbox.
    I know that the SMTP credentials are O.K. - I can send mail from WLM using the same settings.
    Further confusion - I know that it worked in the past because I have a test message in my Sent mail from when I first set up Tbird.
    This is all very weird.
    Has anyone else seen something similar?
    Also, is there a debug option where I can trace the SMTP protocol when the email is being sent?
    Cheers
    LGC

    Update: - I sent two separate test messages and saved both the failing emails as Draft to retry after restarting Tbird.
    I've just noticed that they are both in a Drafts folder on my mail server.
    Not, however, the Drafts area for emails composed using the web mail client but under a separate Folders tree.
    I can't send the email with the web mail client, although I can forward it.
    So further proof that the IMAP side is working.

  • Unity Connection Voice Mail Issue

    Hi,
    I have a weird Unity Connection Voice Mail issue and would appriciate any help i can get. Many thanks in advance.
    I have Unity connection 7.0 and CUCM 7.0 integrated in a lab enviroment and here is what happens.
    When I place a call internally say from 2001 to 2002, things work as expected, 2002 rings and it goes to voicemail where I can leave voicemail and listen to it from 2002.
    However, if I place call from the PSTN to the same number 2002 (or any other number in other sites etc) the call again rings in 2002 and goes to voicemail, unity cnx plays the greetings for 2002 and says record your message as usual. Everything up to point is fine, then when the time on the PSTN phone is showing around 14 seconds into the call unity starts playing, "to send this message press one", if I press one nothing happens.
    I have rebuilt unity and cucm, even just configured the bare minimum in the lab and still getting the same result. I tried calling from E1 connection and T1 connection but with the same results.
    I have run out of ideas...
    ===============================
    Here is a call trace from an internal call:
    CallData, 1, CallerId=2003, CalledId=2002, RedirectingId=2002, Origin=16, Reason=4, CallGuid=8B7859FD6C16417A9A07F507418DD25B, CallerName=, LastRedirectingId=2002, LastRedirectingReason=4, PortDisplayName=PhoneSystem-1-001
    Application, 1, 2003, AttemptForward
    State, 1, 2003, State - AttemptForward.cde!Dummy
    State, 1, 2003, Event is [NULL]
    Application, 1, 2003, PHTransfer
    State, 1, 2003, State - PHTransfer.cde!LoadInfo
    State, 1, 2003, Event is [TrueEvent]
    Application, 1, 2003, PHGreeting
    State, 1, 2003, State - PHGreeting.cde!PlayGreeting
    Display, 1, 2003, Call answered if needed
    Display, 1, 2003, Playing greeting for Subscriber:  hq2
    Display, 1, 2003, No DTMF received
    Display, 1, 2003, Playing greeting for Subscriber:  hq2
    State, 1, 2003, Event is [RecordMsgEvent]
    State, 1, 2003, State - PHGreeting.cde!RecordMsg
    State, 1, 2003, Event is [NULL]
    State, 1, 2003, State - PHGreeting.cde!RunEditMsg
    Application, 1, 2003, -->MessageEditing
    State, 1, 2003, State - MessageEditing.cde!CheckMsgMenuOpt
    State, 1, 2003, Event is [EditMessageMenuEvent]
    State, 1, 2003, State - MessageEditing.cde!PlayEditMenu
    State, 1, 2003, Event is [HangupEvent]
    State, 1, 2003, State - MessageEditing.cde!CheckMsgLength
    State, 1, 2003, Event is [ManyEvent]
    State, 1, 2003, State - MessageEditing.cde!SendMsg
    State, 1, 2003, Event is [TrueEvent]
    State, 1, 2003, State - MessageEditing.cde!ConfirmSend
    State, 1, 2003, Event is [HangupEvent]
    Application, 1, 2003, <--MessageEditing
    State, 1, 2003, Event is [HangupEvent]
    Display, 1, 2003, Idle
    Display, 1, , Dialing (MWI) '2002'
    Display, 1, , Idle
    and here is a trace from an external (PSTN) call
    Trying 142.100.64.13, 5000 ... Open
    CallData, 1, CallerId=911, CalledId=2002, RedirectingId=2002, Origin=16, Reason=4, CallGuid=CA3DFD90846C4FE7B0D68298A7698287, CallerName=PSTN Emergency, LastRedirectingId=2002, LastRedirectingReason=4, PortDisplayName=PhoneSystem-1-001
    Application, 1, 911, AttemptForward
    State, 1, 911, State - AttemptForward.cde!Dummy
    State, 1, 911, Event is [NULL]
    Application, 1, 911, PHTransfer
    State, 1, 911, State - PHTransfer.cde!LoadInfo
    State, 1, 911, Event is [TrueEvent]
    Application, 1, 911, PHGreeting
    State, 1, 911, State - PHGreeting.cde!PlayGreeting
    Display, 1, 911, Call answered if needed
    Display, 1, 911, Playing greeting for Subscriber:  hq2
    Display, 1, 911, No DTMF received
    Display, 1, 911, Playing greeting for Subscriber:  hq2
    State, 1, 911, Event is [RecordMsgEvent]
    State, 1, 911, State - PHGreeting.cde!RecordMsg
    State, 1, 911, Event is [NULL]
    State, 1, 911, State - PHGreeting.cde!RunEditMsg
    Application, 1, 911, -->MessageEditing
    State, 1, 911, State - MessageEditing.cde!CheckMsgMenuOpt
    State, 1, 911, Event is [EditMessageMenuEvent]
    State, 1, 911, State - MessageEditing.cde!PlayEditMenu
    State, 1, 911, Event is [HangupEvent]
    State, 1, 911, State - MessageEditing.cde!CheckMsgLength
    State, 1, 911, Event is [NULL]
    Application, 1, 911, <--MessageEditing
    State, 1, 911, Event is [NULL]
    State, 1, 911, State - PHGreeting.cde!AfterMsg
    State, 1, 911, Event is [NULL]
    Display, 1, 911, Idle

    Sounds like one way audio from PSTN to your Unity Connection, couple of things to check:
    1. ensure your protocols are bound properly on the GW, i.e. SIP/H323/MGCP
    2. Make sure IP routing is OK between Unity and the voice gateway
    HTH,
    Chris

  • Mail issues on iOS 8 (unread mail, accidental deletions)

    Hello,
    ever since I updated my iPad 4 to iOS 8, I have had problems with my mail app. I hoped that it was a glitch and that updates would fix it, but now I'm on 8.1.2 and things remain the same. Here's what is troubling me:
    The new unread e-mails in "All inboxes" are shown in parentheses behind each folder on the Mailboxes screen. (Same is true for the top left "Mailboxes" link while I'm reading an e-mail on landscape orientation.) Now, while the e-mails themselves lose the little blue dot as soon as I open an e-mail, the parentheses-marker remains the same, signalling to me that there are unread e-mails. Or rather: As I flip through my unread e-mails, all but one are registered as read. In the end, the top left corner always still says "Mailboxes (1)" even when I've read all e-mails. The only way to get rid of that "(1)" is by selecting another read e-mail. Then it disappears.
    When swimping e-mails to lefts to reveal the options menu, half the time I don't even get far enough t reveal the red "delete" button before the e-mail is deleted automatically. I hardly dare swiping important e-mails to the left anymore because they might be deleted accidentally. (This is particularly annoying if I want to flag an e-mail.)
    Rarely, but often enough to bother me, the mail app crashes while typing or reading an e-mail.
    These are enough problems to make me ask for help. Would resetting the network settings help? Does anyone else have these problems? It's all involving the Mail app. Should I switch to a third party mail app instead?
    Any help is much appreciated. Thanks,
    Nils

    I have the exact same issue! Works smooth as butter on iOS 8.1 but not Yosemite... I'm running the pre-seed beta Yosemite update which supposedly fixes some Exchange issues but it hasn't fixed this one!
    Exchange remains unusable for me in Apple Mail in Yosemite...

  • Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved.  It started with the last upgrade to 10.8

    Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved.  It started with the last upgrade to 10.8

    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
    Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    resetpassword
    That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • I can't remember my Apple ID password or my security question answers. When I try to reset my password it wants to send it to my e-mail address but I can't get the e-mail because I don't have security answers or the password. How do I reset password?

    I can't remember my Apple ID password or my security question answers. When I try to reset my password it wants to send it to my e-mail address but I can't get the e-mail because I don't know my security answers or the password. How do I reset password?

    Alternatives for Help Resetting Security Questions and/or Rescue Mail
         1. If you have a rescue email address or a Security Questions issue, then see:
             If you forgot the answers to your Apple ID security questions - Apple Support.
             Manage your Apple ID primary, rescue, alternate, and notification email addresses - Apple Support
         2. Fill out and submit this form. Select the topic, Account Security. You must
             have a Rescue Email to use this option.
         3. This is the only option if you do not already have a valid Rescue Email.
             These are telephone numbers for contacting Apple Support in your country.
             Apple ID- Contacting Apple for help with Apple ID account security. Select
             the appropriate country and call. Ask to speak to the Account Security Team.
         4. Account security issues almost always require you to speak directly to an
             Apple representative to securely establish your identity as the account holder.
             You can set it up so that Apple calls you, either immediately or at a time
             convenient to you.
                1. Go to www.apple.com/support.
                2. Choose Contact Support and click Contact Us.
                3. Choose Other Apple ID Topics and choose the appropriate topic for
                    your issue.
                4. Follow the onscreen instructions.
             Note: If you have already forgotten your security questions, then you cannot
             set up a rescue email address in order to reset them. You must set up
             the rescue email address beforehand.
    Your Apple ID: Manage My Apple ID.
                            Apple ID- All about Apple ID security questions.

  • How can I issue a warning if user exits without saving data first?

    One of our clients has his users fill the LC Designer PDFs on their web site. They request that the users get a “Do you really want to exit?” warning,  if they navigate away from the form, after having made changes to it. I was able to simulate the AcroScript “Dirty” state by comparing the xfa.data.saveXML with the original document content. My problem is that I can’t seem to be able to issue the warning in time for the user to do something about it. I tried to use the DocClose event, but (as described in the documentation) there is no way for the user to go back to the document.

    First you need to make sure that you have setup the machine with a valid app store account to tie the machine to the server OS.  To boot the MacMini so you can do RAID setup you must boot into recovery mode.  Hold down Command+R and power up.  Enter disk utility go through the steps to create the RAID which will erase everything on the HD.  You need to make sure the build gets completed.  Once done reboot into recovery mode again and you can do a OS install.  If I remember correctly this will just install the base OS.  Once you have setup the machine again with the valid app store account the server app will show up in the app store for you to download.
    Of course if you don't want to rebuild everything you can hook up a USB harddrive and turn on time machine.  Makle sure it completes and you have several restore points.  Go through the RAID build process.  Once complete boot into recovery mode, with the USB drive attached, and you will have an option to restore from a time machine backup.

  • No issues, but curious..why do I always get permissions repaired when I click on 'repair permissions in Disk Utility......it usually has to do with core permissions and it's happened since i got this MacBook Pro in 3/11..it continues with 10.7

    No issues, but curious..why do I always get permissions repaired when I click on 'repair permissions' in Disk Utility ??......it usually has to do with core permissions and it's happened since i got this MacBook Pro in 3/11..I'll try this every 2/3 wks and always get repairs.....yet, I don't really have issues....it's been weird.......it continues with 10.7 and the update to 10.7.1.. a sample:
    Permissions differ on “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/da.lproj/UIAgent.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
    Repaired “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/da.lproj/UIAgent.nib”
    Permissions differ on “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/da.lproj/MainMenu.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
    Repaired “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/da.lproj/MainMenu.nib”
    Permissions differ on “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/da.lproj/MainMenu.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
    Repaired “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/da.lproj/MainMenu.nib”
    Group differs on “Library/Preferences/com.apple.alf.plist”; should be 80; group is 0.
    Repaired “Library/Preferences/com.apple.alf.plist”
    Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.

    As described in this article, don't worry about it:
    http://support.apple.com/kb/TS1448?viewlocale=en_US

  • This is regarding CBMA in SAP PI 7.3.1. I have set up the alert mail using default java mail client.I do receive the alerts via mail. But my requirement is to direct all the mails to Business workplace inbox in ECC.

    This is regarding CBMA in single stack SAP PI 7.3.1. I have set up the alert mail using default java mail client.I do receive the alerts via mail. But my requirement is to direct all the alert mails to Business workplace inbox in ECC.
    So I need to set up PI to redirect mails to ECC Business workplace user inbox (sbwp). From here rules are set up & routed per distribution list.
    Please guide me how I can achieve this requirement.

    Hi,
    yes, it is a little bit different. This is the issue.....  
    But I am not sure if your links will help:
    1) /people/william.li/blog/2008/02/13/sap-pi-71-mapping-enhancements-series-using-graphical-variable
    is about a different solution. I do not need to count the number of lines of the source message.
    And the second variable is about concat line by line from unbound node to unbound node.
    My issue is:
    Souce:
    Message line (0...unbound) ! ! ! ! ! ! ! !
    .    ResultLine   (1..1)
    Mapping:
    =>   ResultLine1
           ResultLine2
           ResultLine........          => into UDF to an element  (1..1) in one mapping operation.
    So that all "ResultLine"s are included.
    The result is explained in the given link for Mail attachment with UDF.
    So I am not sure how to use this thread for my issue.
    In the comments of that blog Christoph Gerber writes that the new variable feature can only handle single values.
    So it is not suitable for my purposes as I have a list of values here that needs to be moved into the target message field.
    2) http://wiki.sdn.sap.com/wiki/display/Java/UsingEditJavaSectioninMessageMapping
    shows where to find the button "Java section" which is not available here in 7.1
    3) /people/sap.user72/blog/2005/10/01/xi-new-features-in-sp14
    too is about the nice little button for Java Section that is no longer existing on PI 7.1 screen for mappings.  
    So my issue is: How to replace the Java section function with global variables in PI 7.1?
    Best regards
    Dirk

  • Mail Issue in Solaris 10

    Hi,
    I wanted to send mails from my solaris box. Below is the step i used
    # svcs | grep mail
    # svcadm enable smtp
    # svcs | grep mail
    online 14:24:58 svc:/network/smtp:sendmail
    # mail -s "HELLO" [email protected]
    Nothing happens after this... i tried with different mail id's and different mail servers but all failed.
    can someone help me in troubleshooting this issue?
    Regards,
    Ashok Kumar.G

    Hi Chris & Darren,
    Thanks for your updates. Currently i have resolved the issue and i am able to send mail to gmail & yahoo accounts. The issue was with my domain name present in /etc/hosts file and settings in /etc/nsswitch.conf file.
    But i am unable to send any mail's to my company's POP3 mail server email accounts.
    # mailq
    /var/spool/mqueue is empty
    Total requests: 0
    # grep DS* /etc/mail/sendmail.cf
    ##### SENDMAIL CONFIGURATION FILE
    ##### DO NOT EDIT THIS FILE! Only edit the source .mc file.
    #O DontBlameSendmail=safe
    # default LDAP map specification
    # need to set this now before any LDAP maps are defined
    #O LDAPDefaultSpec=-h localhost
    # my LDAP cluster
    # need to set this before any LDAP lookups are done (including classes)
    #D{sendmailMTACluster}$m
    #Dj$w.Foo.COM
    DS
    DnMAILER-DAEMON
    CPREDIRECT
    DZ8.13.8
    O DeliveryMode=background
    #O IgnoreDots=False
    #O HostStatusDirectory=.hoststat
    # single thread deliveries (requires HostStatusDirectory)?
    #O SingleThreadDelivery=False
    O DaemonPortOptions=Name=MTA-v4, Family=inet
    O DaemonPortOptions=Name=MTA-v6, Family=inet6
    O DaemonPortOptions=Port=587, Name=MSA, M=E
    #O DirectSubmissionModifiers
    O QueueDirectory=/var/spool/mqueue
    # time for DeliverBy; extension disabled if less than 0
    #O DeliverByMin=0
    #O DontPruneRoutes=False
    # default UID (can be username or userid:groupid)
    #O DefaultUser=mailnull
    #O UserDatabaseSpec=/etc/mail/userdb
    #O DelayLA=0
    #O MaxDaemonChildren=0
    #O DefaultCharSet=unknown-8bit
    #O DialDelay=0s
    #O DontExpandCnames=False
    #O DontInitGroups=False
    #O DoubleBounceAddress=postmaster
    #O DeadLetterDrop=/var/tmp/dead.letter
    #O DontProbeInterfaces=False
    # Return-Receipt-To: header implies DSN request
    #O RrtImpliesDsn=False
    # Data file (df) memory-buffer file maximum size
    #O DataFileBufferSize=4096
    #O MailboxDatabase=pw
    # override compile time flag REQUIRES_DIR_FSYNC
    #O RequiresDirfsync=true
    #O AuthMechanisms=EXTERNAL GSSAPI KERBEROS_V4 DIGEST-MD5 CRAM-MD5
    #O DefaultAuthInfo=/etc/mail/default-auth-info
    # DHParameters (only required if DSA/DH is used)
    #O DHParameters
    # QUEUE GROUP DEFINITIONS #
    H?D?Resent-Date: $a
    H?D?Date: $a
    # HPosted-Date: $a
    # H?l?Received-Date: $b
    # addresses sent to [email protected] will give a 551 error code
    R$* < @ $+ .REDIRECT. > $: $1 < @ $2 . REDIRECT . > < ${opMode} >
    R$* < @ $+ .REDIRECT. > <i> $: $1 < @ $2 . REDIRECT. >
    R$* < @ $+ .REDIRECT. > < $- > $#error $@ 5.1.1 $: "551 User has moved; please try " <$1@$2>
    # handle non-DNS hostnames (*.bitnet, *.decnet, *.uucp, etc)
    R<TEMP> $* $#error $@ 4.1.8 $: "451 Domain of sender address " $&f " does not resolve"
    R<PERM> $* $#error $@ 5.1.8 $: "553 Domain of sender address " $&f " does not exist"
    R<FORGED> $#error $@ 5.7.1 $: "550 Relaying denied. IP name possibly forged " $&{client_name}
    ##### MAIL FILTER DEFINITIONS
    ##### MAILER DEFINITIONS
    R$+ $: $>AddDomain $1 add local domain if needed
    R$+ $: $>AddDomain $1 add local domain if needed
    R$+ $: $>AddDomain $1 add local domain if needed
    SAddDomain
    Mlocal, P=/usr/lib/mail.local, F=lsDFMAw5:/|@qPSXmnz9, S=EnvFromSMTP/HdrFromL, R=EnvToL/HdrToL,
    T=DNS/RFC822/SMTP,
    Mprog, P=/bin/sh, F=lsDFMoqeu9, S=EnvFromL/HdrFromL, R=EnvToL/HdrToL, D=$z:/,
    Msmtp, P=[IPC], F=mDFMuX, S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP, E=\r\n, L=990,
    T=DNS/RFC822/SMTP,
    Mesmtp, P=[IPC], F=mDFMuXa, S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP, E=\r\n, L=990,
    T=DNS/RFC822/SMTP,
    Msmtp8, P=[IPC], F=mDFMuX8, S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP, E=\r\n, L=990,
    T=DNS/RFC822/SMTP,
    Mdsmtp, P=[IPC], F=mDFMuXa%, S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP, E=\r\n, L=990,
    T=DNS/RFC822/SMTP,
    Mrelay, P=[IPC], F=mDFMuXa8, S=EnvFromSMTP/HdrFromSMTP, R=MasqSMTP, E=\r\n, L=2040,
    T=DNS/RFC822/SMTP,
    nslookup MYMAILSERVERIP
    # nslookup MYMAILSERVERIP
    Server: 203.208.224.91
    Address: 203.208.224.91#53
    Non-authoritative answer:
    36.6.127.203.in-addr.arpa name = mail.XXXX.com.
    Authoritative answers can be found from:
    6.127.203.in-addr.arpa nameserver = dnssec2.singnet.com.sg.
    6.127.203.in-addr.arpa nameserver = dnssec3.singnet.com.sg.
    6.127.203.in-addr.arpa nameserver = dnssec1.singnet.com.sg.
    dnssec1.singnet.com.sg internet address = 165.21.83.11
    dnssec2.singnet.com.sg internet address = 195.13.10.226
    dnssec3.singnet.com.sg internet address = 165.21.100.11
    nslookup mailhost.OLAMNET.COM
    # nslookup OLMXDB.OLAMNET.COM
    Server: 203.208.224.91
    Address: 203.208.224.91#53
    ** server can't find OLMXDB.OLAMNET.COM: NXDOMAIN
    Please advice...!!!
    Regards,
    Ashok Kumar.G

  • 10.5.3 Outgoing Mail Issue

    Greetings,
    I recently updated to 10.5.3. Right after this was done I began experiencing issues with sending and receiving email. The error returned is as follows:
    Cannot send message using the server X.
    Verify that you have addressed this message correctly. Check your SMTP server settings in Mail Preferences and verify any advanced settings with your system administrator.
    It's a POP account. I didn't change the name of the incoming mail server but I did change the name of the outgoing mail server by adding mail. to the front. I'm using Port 993 with SSL, with an Authenticated POP (ADOP) Authentication. I'm not as computer savvy as I'd like to be, so I'm sure I'm leaving out some details. Any and all assistance is much appreciated.
    Cheers,
    Jeff

    You changed the outgoing server settings, or SMTP server settings based on what? In an attempt to fix the sending problem on your own, or based on an SMTP server settings change by the email account provider for this account?

Maybe you are looking for

  • Missing data in weekly EWA report

    Hello SDN, I have run weekly EWA reports for our productive ECC5 system through SolMan 3.1 for some time, but recently I've noticed that some information is missing from the report. Section 11.2 (Response Times) includes a graph showing the Top 5 tra

  • Firefox 3.6.8. messed up an older version of Firefox

    As the title indicates, I believe that installing Firefox 3.6.8. messed up my favorite version of Firefox, version 1.5.0.3, or something like that on Windows XP SP3. I installed 3.6.8. to another folder, like I did a while back with 3.0.1, which is s

  • Making An Event Two Lines Long In Month View

    Hey Everyone, I only use iCal in month view and most of the time when I enter an event that has a long name it shows up as two lines, so I am able to read it all. However, sometimes it only goes for a single line and cuts off the end of the event tit

  • DB connect dump while creating structure

    Hi All, My source system is oracle, so we are using DB connect. In oracle system we created a View and i am trying to create datasource with that fields through RSDBC. i am able to see my view in RSDBC and then i tried to check the data by clicking "

  • Persisting a user id across an OSB JMS Application

    I have an application that user's log in to. After logging in they call an OSB service which puts a message on a jms queue using an OSB business service. I have an OSB proxy service that is listening on the queue. It picks up the message off the queu