Z10 error message unexpected data value

I recently upgraded to a Z10. After pairing my phone to my 2012 Chev 2500 I attempted to make my first voice activated hands free call. After going through the command of call (contact name) it starts the call, then it immediately disconnects with the error unexpected data value. I can dial the number with the dial pad or go to my contact list and access the number from there. I did send a Twitter to BBHELP however I still have not received an answer

The explanation of error 1130610 is the following:Possible Problems - Essbase cannot open a file. Possible Solutions - If you are using an error file, make sure that the error file is being created in a directory that already exists. Make sure you are using the ESSCMD IMPORT command correctly. Put all files the ESSCMD script needs in the $ARBORPATH\APP\applicationName\databaseName directory. Run the ESSCMD script from the $ARBORPATH\APP\applicationName\databaseName directory. Check the ESSCMD script for invalid paths. Make sure every folder that the script is pointing to exists. If you are using an error file, make sure that the error file is being created in a directory that already exists.

Similar Messages

  • Exchange Connector 3.0 (Hotfix Release) Error - Error Message=The key value of an object cannot be changed.

    Hello,
    I am running Service Manager 2012 with the Exchange Connector 3.0 RTM (Re-release Version).  The issue I have is that when an e-mail is processed that is trying to update the status or event log of an incident, the Exchange Connector encounters an error
    and will not update the object.  The Operations Manager log denotes: 
    Exchange Connector: Unable to process mail item. Subject="Close Ticket: [IRXXXXX]", Error Message=The key value of an object cannot be changed.
    This will happen on a seemingly random selection of Incident work items.  I cannot correlate them with a specific template, exchange connector, or incident tier queue that could be causing the issue.  I can recreate the way a specific ticket
    was created and update it through e-mail without issue, and the next ticket can cause the error to trigger. 
    I have already opened a Microsoft Support Case using our Software Assurance agreement.  After a few months of troubleshooting the issue and trying different fixes, Microsoft support said they were unable to fix the problem and that we would need to
    purchase Premier support to go further. At this point I thought I would reach out to the community for ideas.
    The setup I have for the Exchange connectors is as follows.
    I have three separate Exchange connectors set up to three different mailboxes.  One Exchange connector processes external support tickets and applies a specific template.  Another processes client support tickets and applies a different template. 
    And the last Exchange connector processes internal tickets and also processes the updates of tickets created by the other two exchange connectors. 
    Here are the fixes I've attempted so far:
    1.  Changed the templates that each Exchange connector applies.
    2.  Changed the management pack that each template is stored in.
    3.  Checked my management pack(s) for extended classes by searching for Extension="true" (This was also checked by Microsoft support)
    4.  Deleted each Exchange connector and recreated each connector
    5.  Deleted each Exchange connector, deleted the management pack, and reinstalled the management pack and connectors
    6.  Repeated Step 5, deleted Microsoft.SystemCenter.ExchangeConnector.dll and Microsoft.SystemCenter.ExchangeConnector.resources.dll and then installed the Exchange connector Re-release version 3.0 Published 10/7/2013 (which is supposed to address this
    issue)
    7.  Deleted the HealthServiceState folder and restarted the Management Service
    I'm not really sure what to do at this point.  I've put many hours into customizing my installation to get it working for my organization so reformatting and starting from scratch would be a nightmare scenario.  This environment is in production.
    I do have a band-aid in place using Orchestrator.  Basically I have a monitor task searching for the error message and when it finds one it searches the mailbox for the offending e-mail and applies either the Resolve or Close status change that is requested
    from the user.  However, I do not have it working to update the ticket if a comment is applied to the incident.  If anyone is in this position and needs to know how to apply this Orchestrator task I am willing to provide my workflow.
    I am new to the community and am already impressed with the amount of help and effort there is in this forum.  I appreciate in advance any help that is provided and am open to any ideas at this point.  I can post more information as needed.
    Thank you,
    John

    Yes that is the whole template.  However, I did confirm that this is only happening to incidents where either of two situations triggers a runbook to fire and modify the incident.  When I remove the activity from the incident it does clear the
    issue.  For some background the first Runbook Activity set's the first response date when an incident is resolved if the first response value is null.  The second assigns the incident to a user upon creation if the title contains assignto:username;
    1.)
    <ObjectTemplate ID="Template.d33b5bbcaf3c49b18d8b72bc1e5e1ee4" TypeID="IncidentManagement!System.WorkItem.Incident.ProjectionType">
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Escalated$">False</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/NeedsKnowledgeArticle$">False</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/HasCreatedKnowledgeArticle$">False</Property>
    <Object Path="$Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' TypeConstraint='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity']$">
    <Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/RunbookId$">4085f0da-ab83-48e5-bbe3-1f3b5fa2dc4a</Property>
    <Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/TemplateId$">Template.d33b5bbcaf3c49b18d8b72bc1e5e1ee4</Property>
    <Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/IsReadyForAutomation$">True</Property>
    <Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/PropertyMapping$">&lt;?xml version="1.0" encoding="utf-16"?&gt;
    &lt;ParameterMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"&gt;
    &lt;ParameterList&gt;
    &lt;RunbookParameterItem&gt;
    &lt;Name&gt;Get RA Guid&lt;/Name&gt;
    &lt;Id&gt;344b15effc1a44528e517c5b4227179c&lt;/Id&gt;
    &lt;Type&gt;String&lt;/Type&gt;
    &lt;Value&gt;Generic::Id&lt;/Value&gt;
    &lt;Direction&gt;In&lt;/Direction&gt;
    &lt;ContextInfo /&gt;
    &lt;/RunbookParameterItem&gt;
    &lt;/ParameterList&gt;
    &lt;RunbookId&gt;4085f0da-ab83-48e5-bbe3-1f3b5fa2dc4a&lt;/RunbookId&gt;
    &lt;/ParameterMapping&gt;</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/ChildId$">1906</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Status$">$MPElement[Name='CustomSystem_WorkItem_Activity_Library!ActivityStatusEnum.Active']$</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Skip$">False</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Library!System.WorkItem']/Title$">Set First Response on Resolve</Property>
    </Object>
    </ObjectTemplate>
    2.)
    <ObjectTemplate ID="Template.b311e1f9126e4e19bbbbeb65ddb220ba" TypeID="IncidentManagement!System.WorkItem.Incident.ProjectionType">
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Escalated$">False</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Status$">$MPElement[Name='CustomSystem_WorkItem_Incident_Library!IncidentStatusEnum.Active']$</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/NeedsKnowledgeArticle$">False</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/HasCreatedKnowledgeArticle$">False</Property>
    <Object Path="$Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' TypeConstraint='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity']$">
    <Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/RunbookId$">ca88b13b-861a-4d39-a3cb-fd912d951e35</Property>
    <Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/TemplateId$">Template.b311e1f9126e4e19bbbbeb65ddb220ba</Property>
    <Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/IsReadyForAutomation$">True</Property>
    <Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/PropertyMapping$">&lt;?xml version="1.0" encoding="utf-16"?&gt;
    &lt;ParameterMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"&gt;
    &lt;ParameterList&gt;
    &lt;RunbookParameterItem&gt;
    &lt;Name&gt;RA Activity GUID&lt;/Name&gt;
    &lt;Id&gt;5677d117a0294a2c898a695032f26c72&lt;/Id&gt;
    &lt;Type&gt;String&lt;/Type&gt;
    &lt;Value&gt;Generic::Id&lt;/Value&gt;
    &lt;Direction&gt;In&lt;/Direction&gt;
    &lt;ContextInfo /&gt;
    &lt;/RunbookParameterItem&gt;
    &lt;/ParameterList&gt;
    &lt;RunbookId&gt;ca88b13b-861a-4d39-a3cb-fd912d951e35&lt;/RunbookId&gt;
    &lt;/ParameterMapping&gt;</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/ChildId$">1120</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Status$">$MPElement[Name='CustomSystem_WorkItem_Activity_Library!ActivityStatusEnum.Active']$</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Skip$">False</Property>
    <Property Path="$Context/Property[Type='WorkItem!System.WorkItem']/Title$">Execute Orchestrator IR - Autoassign</Property>
    </Object>
    </ObjectTemplate>

  • Error while saving date value in Java dictionary

    Hello Everybody,
    I got following error while saving date value in one of the fields of the Java table.
    Internal error occured in submit request: Error in method updateRequestContact : The object of type java.sql.Date with the value '2005-12-04 08:00:00.0' assigned to host variable 9 is not normalized. It must not contain time components in the time zone running the virtual machine.
    I can't find why it is taking time value in the date object.
    This value is coming from the RFC as a date value, and I am saving this value in Java dictionary table.
    Same code for this was working fine earlier. But, now suddenly it gives error like this.
    Even if I provide date on the screen from webdynpro application, this date value can't save in the Java dictionary and gives same error.
    What should be the problem behind this?
    Regards,
    Bhavik

    Hi Satyajit,
    I am getting date value from the screen of the webdynpro application from date picker control and passing this value in Java dictionary.
    More Information:
    I have dat value in the Date object: <b>target_date</b>
    But Now I have made new Date object as following:
    Date target_Date1 = new Date(target_date.getYear(),target_date.getMonth(),target_date.getDate());
    Then I am passing this object to Java dictionary. Still it gives same error.
    Then I have changed code as following:
              int l_year;
              int l_month;
              int l_days;
              l_year = target_Date.getYear();
              l_month = target_Date.getMonth();
              l_days = target_Date.getDate();
         Date target_Date1 = new Date(l_year,l_month,l_days);
    Now it works for me.
    But I guess this is not the perment solution. It looks very strange. I have used so many date objects at various palces. So, this solution is not the final for me.
    I want to findout the main cause of it.
    One more thing: This code was working for a mornth or two. But, now suddenly it is giving this error.
    Please help me if anybody knows.
    Regards,
    Bhavik

  • Excel 2007 = Refresh All = Error Message "Initialization Data Source Failed"

    Excel 2007 => Data Tab - Refresh All => Error Message "Initialization Data Source Failed
    2nd Error message:
    The following data ranged failed to refresh:  ExternalData1 - Continue to refresh all
    How do I resolve this? Trying to connect to Oracle DB environment 12C

    What will happen if you rebuild the PivotTable/Table ?
    Make sure the external database is available and the Oracle Provider for OLE DB is installed correctly.
    Wind Zhang
    TechNet Community Support

  • I have not been able to back up for2 days.  Time machine error message: /Volumes/Data/David's MacBook Air.sparsebundle" is already in use.

    I have not been able to back up for2 days.  Time machine error message: /Volumes/Data/David’s MacBook Air.sparsebundle” is already in use.
    What now?
    Macbook Air.
    Was working fine for the past year until now.

    See more like this on the right.. this is the most common error reported here since mountain lion came out..
    Or read C12.. http://pondini.org/TM/Troubleshooting.html
    Or just restart the whole network.. in right order from off.. modem.. router / TC.. clients 2min gap.

  • Unable to email a document.  Keep getting error message:  Invalid Date Enter 2-digit month

    Unable to email a document.  Keep getting error message:  Invalid Date Enter 2-digit month
    Does not happen with all forms which emante from same USG webpage
    Any adivice?

    If i am using 11G andrtp is 11g but on rtp side if they configure SSL, is it mandatory to do it from our side also?No it not mandatory to enable SSL at your end however you have to configure identity and trsut at your end.
    Any update on my regular question(The main forum question)?You mentioned that you are posting message from 10g to 11g and as per log you are sending it to URL - https://dev-nog.server:443/b2b/transportServlet
    So few things which I see as a problem are-
    1. You should use URL https://hostname:soa_server_ssl_port/b2b/httpReceiver instead of https://dev-nog.server:443/b2b/transportServlet
    2. SOA server SSL port should be enabled (SSL should be enabled on SOA server)
    3. You should configure wallet at 10g side to contain trust cert of 11g server
    Regards,
    Anuj

  • PS5 starts the error message unexpected / unexplained problem and quits

    PS% starts, then error message "unexpected problem" then PS% quits.
    Computer = MacBook Pro, 2011 model, 2.3 GHz Intel, 4 GB memory
    have not used PS5 for about two years,
    when I initially tried to open, received message that I needed to load JAVA for OSX 2014-001.  Did that
    PS5 is ver. 12.1x200110328 r. 145
    Help.  No chat service available.
    pat

    Please clarify:  do you really mean the over a decade-old, archaic, obsolete Photoshop 5.x, or are you referencing Photoshop CS5?
    If the latter, please don't refer to it as "PS5".  Are you sure you are trying to start Photoshop in 64-bit mode?  Photoshop CS5 is the only Mac version that ever offered a choice between 32-bit and 64-bit modes.
    In 32-bit mode, Photoshop CS5 can only have access to a very limited amount of RAM.
    Your 4 GB of RAM are very, very little RAM these days.  You don't even mention the exact version of your OS.
    Also, give machine details:
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    A screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Error message "Transfer date 30.06.2007 is more than one year after the clo

    Hi SAP expert,
    I received error message "Transfer date 30.06.2007 is more than one year after the closed fiscal year" - message number AC 187. Used Tcode OAAQ when tried to reverse year end closing for depreciation area. How can i correct this problem? I want to finish for the whole year 2007 depreciation.
    Hope u guys can help me. Thanking u in advance.
    Regards,
    Nazrul

    Hi SAP experts,
    any solution for my porblem?
    TQ

  • What to do when you get an error message about data execution prevention

    i have windowsXP and i downloaded Itunes now that i try to open itunes i'm getting an error message about Data Execution Prevention. Please let me know what to do to be able to open itunes...

    You came from the correct article. Here is what it has to say about that error.
    Error 2, 4 (or -4), 6, 1000, 9006
    Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.

  • SRM  Error message Workcenter data incomplete

    Client is having problems creating PO's in SRM.  The client is getting an error message Workcenter data incomplete.  Enter data in all required fields. I have ran the consistency check and it look OK.
    When I move them from one org to another the error goes away. Both Org structures are at the same level, but in the one structure all the persons have the same error. Address for person (BP) 0000001232 contains errors: e-mail address missing when I run the Branch for sysnchronization for repair for this unit.

    hI
    Hope you might run HRALXSYNC  report or BBP_BP_OM_INTEGRATE TRANSACTION
    Go to the error Organisation and go to address tab at the bottom you may find one email button. check what is the entry of email address
    br
    muthu

  • Error message: The data for filename was already added to the form

    I recently modified an existing data-collection PDF - only mod was to add some additional pull-down menu options in two fields. I went thru the Distribution wizard, tested the revised form, added the PDF to the Responses file...everything seemed fine. Next day, I distributed the revised form, and had 22 submissions. When adding the 22 submissions to the Response file, 6 or 7 bounced with the error message "The data for <filename> was already added to the form", even though that was not true. I went back, cleared all, and added one of the "bad" files to the response form. It went in OK, but I could not add another "bad one". Although several of the forms may be submitted by the same person, the data is different in all of the submissions, plus, we've been doing this procdure for over a year and never had an issue until now.
    The original form may have been created in Acrobat X, and I have Acrobat 9 Pro. Not sure if that is part or all of the answer. Thanks for any insights...I saw a posting in the Reader side, but I can't see any answers.

    Hi
    According to your error message, we need to verify if Microsoft SQL Server Compact appears in the
    Change Data Source dialog. If not, you need to install
    SQL Server Compact components for Visual Studio firstly, and if you choose to install SQL Server Compact 4.0 , you should note that SQL Server Compact 4.0 supports in Visual Studio 2010 Service Pack 1 or later versions. I recommend you to install the latest
    Service Pack (SP) of SQL Server Compact, and latest SP of Visual Studio, then check if the error still occurs. For more information, see:
    http://blogs.msdn.com/b/sqlservercompact/archive/2011/03/15/sql-server-compact-4-0-tooling-support-in-visual-studio-2010-sp1-and-visual-web-developer-express-2010-sp1.aspx
    However if there is no problem with the installation of SQL Server Compact, it will be an issue that regards ASP.NET and website deployment. I suggest you to post the question in the ASP.NET forums at
    http://forums.asp.net/ . It is appropriate and more experts will assist you.
    In addition, you can review the following link:
    Working with SQL Server Compact in Visual Studio：http://msdn.microsoft.com/en-us/library/gg606540(v=vs.100).aspx
    Thanks
    Lydia Zhang

  • Revenue recognition and error message" Missing data: Provision account Message no. VU019

    Hi,
    I have configured revenue recognition type "B" for my item categories and I am using BOMs where pricing is set at item level. The issue is that when I have more than one components in my BOM then I get an error message (Missing data: Provision account Message no. VU019) at the time of saving sales order though I have configured the provision account. However If I enter the same component/material in the sales order without BOM which will have same pricing data then it does not through the above error message. Please help what could be the potential issue.
    Best Regards
    Javed

    Have you checked the Analysis from condition tab once you created a BOM?  If so, what is the message you could see for pricing.
    G. Lakshmipathi

  • HT3275 I get an error message "Volumes/Data-1/Colin's iMac.sparsebundle" is already in use

    My time machine is nor backing up. i get an error message "Volumes/Data-1/Colin's iMac.sparsebundle" is already in use. How do I get backups to recommence?

    Restart the TC is usually enough.. restart the network if you need to.. in correct order.. modem,, TC.. Clients.. 2min gap.
    Read other stuff. C12.
    http://pondini.org/TM/Troubleshooting.html

  • Can't access a mailbox - error message "unexpected response format"

    I went to look at mail message in one mailbox. At first it said that it was having difficulty downloading from the server. I closed and opened the mail program and then I couldn't even get that message. I went over to ".mac" to see if I could view the message there, and I am now seeing an error message - "unexpected response format".
    I have already tried to "rebuild" the mailbox. That didn't work. I've had some problems that were similar, and I've deleted a mail message that was causing the thing to be stuck. This time, I can't even get in. Need serious help, thanks.

    The thing is, this appears to be a .Mac issue that none of us can do anything about, and for which one of the .Mac Forums may be more appropriate...

  • Error Message after data load (error is "1130610")

    We load data using a data load rule. The data seems to load fine except we get the error message "ERROR - 1241101 - Unexpected Essbase error 1130610" on last line below? Any thoughts? Is there a guide somewhere that explains in details all the various error codes and what they refer to? We're using Essbase 6.5.1. Thanks!======================================= OK/INFO - 1003037 - Data Load Updated [364875] cells. OK/INFO - 1003024 - Data Load Elapsed Time : [428.323] seconds. ERROR - 1241101 - Unexpected Essbase error 1130610.=======================================

    The explanation of error 1130610 is the following:Possible Problems - Essbase cannot open a file. Possible Solutions - If you are using an error file, make sure that the error file is being created in a directory that already exists. Make sure you are using the ESSCMD IMPORT command correctly. Put all files the ESSCMD script needs in the $ARBORPATH\APP\applicationName\databaseName directory. Run the ESSCMD script from the $ARBORPATH\APP\applicationName\databaseName directory. Check the ESSCMD script for invalid paths. Make sure every folder that the script is pointing to exists. If you are using an error file, make sure that the error file is being created in a directory that already exists.

Maybe you are looking for

  • Problem with SOAP Scenario

    Hi, I am trying a http to soap scenario. In the receiver soap adapter, I have specified the following: Target url: http://test.abc.com/ Action: handleLogin() When I send the request, I get a "time out error" as the response in the http client tool. H

  • Read from a file and write back

    Hi, I'm trying to read from a text file, and stor into a vector of vectors. This part works fine then i want to randomly split the vector into 2 different vectors a training set and a test set. this part woks fine too. now i want to write each of the

  • Mac book pro ads running in background

    why is it that when I open Safari, apple ads are running without me selecting an ad.  How do I stop this from happening?

  • Changing sliding panels from black to white

    Does anyone know whether the option to change the sliding panels theme from black to white is still possible in Photos 1.0? We use this theme on all the DVD's we create of customers making their own rings with us but it appears it's been removed as a

  • Unable to update ios apps in itunes 11.0.3

    Since the update to version 11.0.3, I am unable to figure out how to update iOS apps in iTunes. It shows that there are updates available but the button to update the apps is now missing. Does anyone know what happened and how to fix that? It is real