Z10 freezing after a call

Hy guys
my z10 freezing after a call....
when i make a call after close it my z10 freezing and i have to reeboot...also if i received a call,when i close it my z10 freezing.....what can i do?why happened?
before the new SO 10.2 never happen.,but since i installed the new SO 10.2 my z10 doesn't works well...
please help me...

Hi teojap,
Welcome to the support community!
This article may help resolve any issues you are experiencing since the update. "BlackBerry smartphone is unstable after an over the air update due to misaligned BlackBerry 10 OS and radio versions" http://blackberry.com/btsc/KB34666 Please make sure to backup your data before making any changes to the BlackBerry smartphone.
Let me know if that helps.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Similar Messages

IPhone 3G freezes after every call after 4.2 update

There isn't much more to say other than that. As soon as I installed the 4.2 update my phone now freezes after every call. It stays frozen for hours, right now it's been frozen over 12 hours (screen is even still lit up). I'm tired of completely restoring my phone after every phone call!!!

its nt a casual evente in many iphone 3G with OS 4.2
really apple is the responsable.
we are honest users, and we need a real answer.
No reset the phone many tiemes, or change the phone.
The problem is sorftware and internal politics in apple.
no more dirty play ...
other companies lets that a user continue with her device, by 5 or more years.
an spencive device need to be by more time.
why apple continue selling Iphone 3G? ...

I have iPad air, screen freezes after FaceTime call and cannot get back to home screen, have to power down and turn back on to get back to home screen. What am I doing wrong?

I have iPad air, screen freezes after FaceTime call and cannot get back to home screen, have to power down and turn back on to get back to home screen. What am I doing wrong?

Hi RWD2,
Welcome to the Support Communities!
To resolve your issue with Facetime freezing when you end a call, I would try the first three steps in the article below.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Resolution
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If you are using Wi-Fi, it may be helpful to try these troubleshooting steps as well:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398?viewlocale=en_US
Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings including previously connected Wi-Fi networks and passwords
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
I hope this information helps ....
Have a great day!
- Judy

4s Ios7 - Phone freezing after completing call.

Any ideas...very annoying. Need to press the sleep button to unfreeze.

I have also noticed that my phone doesnt always notify me of new SMS messages.

Freezing after call

does anyone elses phone freeze after ever call?

Try restoring in iTunes:
Plug in the phone to a computer with iTunes, and launch iTunes. Click on the phone under "DEVICES" on the left. Click Restore. Make sure you have a recent backup. If you restore from a backup and the problem continues, restore again but set it up as a new phone.

Passport screen freezes after a long call

Hello,
I've got my PassPort since fall october.
Although I am quite happy with it, I have noticed that after a long call, say 15min or more, the screen becomes slowly responsive. It doesn't fully freeze, though it is very slow to bring back the unlock screen. After unlocking the screen, the device behave nearly as expected although I have also noticed that the keyboard doesn't light. And if it locks again, it stays slowly responsive until I unlock the screen. To bring back the normal behavior there is nothing to do but restarting the device.
OS is : 10.3.0.1418
Radio is : 10.3.0.1419
Device is full encrypted as well as the SD card.
I've got very few third party apps, say Whatsapp, BBM meeting, radio.fr, beta zone, device switch.
I've removed everything on the device and did a clean, full install with link but I still experienced the same issue.
Any idea ?
Regards,
LB

Ira,
Thanks for replying. No, I did no test without any third party apps. I'd prefer not being forced to uninstall WhatsApp because I'm using it a lot ... I was using it in the past with BB OS 7 and had no issue so far. However I saw a lot of threads dealing with screen freezing after calling but none of them mentionning issue with WhatsApp. Do you have any link about this?
Regards,
LB

After update to 4.3.5 i phone4 is getting freezed while a call came. cant listen anything. and then it is frezzing.After update to 4.3.5 i phone4 is getting freezed while a call came. cant listen anything. and then it is frezzing.

After update to 4.3.5 i phone4 is getting freezed while a call came. cant listen anything. and then it is frezzing.

Try rebooting the device by pressing and holding the on/off and home buttons simultaneously until the screen goes blank and you see the apple logo. It should take about 10-15 seconds to reboot.

My Mac freezes after waking up

I have a rMBP mid 2014 that keeps freezing after sleep, but not every time, since I upgraded to latest Yosemite 10.10.3. I can move the mouse and close all active programs, but it takes long time and will anyway not restart after that. I have to force power off and then power on again, then it will work for a while.
I have tried to do the upgrade again och even tried to reinstall Yosemite again, but it didn't help. Here's a report:
EtreCheck version: 2.2 (132)
Report generated 5/5/15, 11:24 AM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (Retina, 13-inch, Mid 2014) (Technical Specifications)
    MacBook Pro - model: MacBookPro11,1
    1 2.8 GHz Intel Core i5 CPU: 2-core
    16 GB RAM Not upgradeable
        BANK 0/DIMM0
            8 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            8 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en0: 802.11 a/b/g/n/ac
    Battery: Health = Normal - Cycle count = 52 - SN = C01446209C2FT60AN
Video Information: ℹ️
    Intel Iris
        Color LCD 2560 x 1600
System Software: ℹ️
    OS X 10.10.3 (14D136) - Time since boot: 0:10:5
Disk Information: ℹ️
    APPLE SSD SM0256F disk0 : (251 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 249.80 GB (87.51 GB free)
            Core Storage: disk0s2 250.14 GB Online
USB Information: ℹ️
    Apple Internal Memory Card Reader
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Applications/Parallels Desktop.app
    [not loaded]    com.parallels.kext.hypervisor (10.2.0 28956 - SDK 10.7) [Click for support]
    [not loaded]    com.parallels.kext.netbridge (10.2.0 28956 - SDK 10.7) [Click for support]
    [not loaded]    com.parallels.kext.usbconnect (10.2.0 28956 - SDK 10.7) [Click for support]
    [not loaded]    com.parallels.kext.vnic (10.2.0 28956 - SDK 10.7) [Click for support]
        /Library/Extensions
    [not loaded]    com.Elgato.Thunderbolt2DockChargingSupport (1.0.0 - SDK 10.10) [Click for support]
    [not loaded]    com.Elgato.ThunderboltDockChargingSupport (1.0.0 - SDK 10.10) [Click for support]
    [not loaded]    com.elgato.ElgatoThunderboltDockAudioRename (1.0.2 - SDK 10.10) [Click for support]
Startup Items: ℹ️
    HWNetMgr: Path: /Library/StartupItems/HWNetMgr
    HWPortDetect: Path: /Library/StartupItems/HWPortDetect
    StartOuc: Path: /Library/StartupItems/StartOuc
    Startup items are obsolete in OS X Yosemite
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.mtrecorder.plist
Launch Agents: ℹ️
    [loaded]    com.acronis.acep.plist [Click for support]
    [running]    com.teamviewer.teamviewer.plist [Click for support]
    [running]    com.teamviewer.teamviewer_desktop.plist [Click for support]
Launch Daemons: ℹ️
    [failed]    com.apple.spirecorder.plist
    [running]    com.bombich.ccchelper.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2.Agent.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [running]    com.teamviewer.teamviewer_service.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Program (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    XtraFinder    Program (/Applications/XtraFinder.app)
Internet Plug-ins: ℹ️
    MeetingJoinPlugin: Version: Unknown - SDK 10.6 [Click for support]
    SharePointBrowserPlugin: Version: 14.4.9 - SDK 10.6 [Click for support]
    nplastpass: Version: 3.1.77 - SDK 10.10 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    Default Browser: Version: 600 - SDK 10.10
Safari Extensions: ℹ️
    Open in Internet Explorer
3rd Party Preference Panes: ℹ️
    None
Time Machine: ℹ️
    Mobile backups: OFF
    Auto backup: NO - Auto backup turned off
    Volumes being backed up:
        Macintosh HD: Disk size: 249.80 GB Disk used: 162.29 GB
    Destinations:
        Images [Network]
        Total size: 2.20 TB
        Total number of backups: 17
        Oldest backup: 2014-12-01 13:56:38 +0000
        Last backup: 2015-04-06 09:44:01 +0000
        Size of backup disk: Excellent
            Backup size 2.20 TB > (Disk size 249.80 GB X 3)
Top Processes by CPU: ℹ️
        77%    mdworker(9)
         3%    WindowServer
         2%    fontd
         0%    Microsoft Lync
         0%    taskgated
Top Processes by Memory: ℹ️
    820 MB    kernel_task
    377 MB    com.apple.WebKit.WebContent(5)
    360 MB    Microsoft Outlook
    246 MB    Dock
    164 MB    mdworker(9)
Virtual Memory Information: ℹ️
    10.00 GB    Free RAM
    6.03 GB    Used RAM
    0 B    Swap Used
Diagnostics Information: ℹ️
    May 5, 2015, 11:13:37 AM    Self test - passed
I'd be grateful for any help.

Rid the MBP of CleanMyMac. It may very well be the source of your problems.
NO so called cleaning or performance applications should be installed in a Mac. At best they will do nothing, at worst they can corrupt your system.
Ciao.

Jabber for Windows 9.2.4 - Spinner freezes on "forward calls to"

On Jabber for Windows 9.2.4 when we activate "Forward calls to" - the forward is set on controlled phone, however the spinner freezes (see image) and won't clear until a different phone is selected for control. Setting "forward calls to" "none" does not clear the spinner.

Hi Mark,
this is known issue: 'CSCui37305 - After forwarded call, "Setting call forwarding..." does not disappear' and it is already resolved in 9.2.6.
Regards,
Nebojsa

My keyboard freezes after using the option key... what gives?

I have a 17" MacBookPro with OSX 10.6.8
The problem: My keyboard key freeze after using the " option key" in Photoshop or when downloading a file using the option key.
I can usually use it 2 or 3 times before it makes a chirping cricket like sound… then my keys freeze up.? The only way to correct it is to restart.
Anyone else have or had this issue? it's frustrating. What's the deal?

hausman wrote:
tianmiao0304 wrote:
Thanks for your explanation!
Can I just bring my laptop to the nearest service center and get this problem solved directly? You know, usually it will takes several days to receive the backup keyborad, I can't wait
You'll have to phone the service center and ask. (When I lived not far from Lenovo's Canadian service center and wanted to bring in a ThinkPad for warranty repair they said that would be OK with them but my unit would be put on a queue the same as if I'd shipped it in. They simply didn't offer walk-in, while you wait service.)
In the interim it may or may not be possible to reattach the key, even just temporarily, depending on whether it wasn't put on properly at the factory or if it's physically broken in some way. Or you could use an external keyboard until Lenovo sends you a replacement, etc.
I've just call the local service center, he told me that he can not repair individual key, they can just replace the whole keyboard..... How bad luck I am!!!

X freezes after update

I ran a complete update two days ago. The console works fine but X freezes.
I get the identical OpenBox desktop with conky, and the mouse cursor too. But can't move the
mouse, can't exit X with Ctrl-Alt-BS, can't go to virtual terminals (Alt-Ctrl-F2-6). Have to hard
reset.
This is a Dell latitude with a ATI Mobility Radeon X300 graphic card. Screen has native 1600x1050.
By trying various alternatives I might have broke xorg.conf. It is OK to start from scratch.

Hier is Xorg.0.log:
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686
Current Operating System: Linux localhost 2.6.28-ARCH #1 SMP PREEMPT Sun Jan 18 20:17:17 UTC 2009 i686
Build Date: 17 December 2008 08:20:05PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 26 11:03:43 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "aticonfig-Screen[0]-0" (0)
(**) | |-->Monitor "aticonfig-Monitor[0]-0"
(**) | |-->Device "aticonfig-Device[0]-0"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Mouse1
(WW) Disabling Keyboard1
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d5fe0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@1:0:0) ATI Technologies Inc M22 [Mobility Radeon X300] rev 0, Mem @ 0xd0000000/0, 0xdfdf0000/0, I/O @ 0x0000de00/0, BIOS @ 0x????????/131072
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded by default.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(**) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.56.4
Module class: X.Org Video Driver
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for fglrx
(II) ATI Proprietary Linux Driver Version Identifier:8.56.4
(II) ATI Proprietary Linux Driver Release Identifier: 8.561
(II) ATI Proprietary Linux Driver Build Date: Dec 1 2008 14:55:43
(WW) This ATI Proprietary Linux Driver does not guarantee support of video driver ABI higher than 2.0
(WW) Video driver ABI version of the X server is 4.1
(--) Chipset Supported AMD Graphics Processor (0x5460) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) fglrx(0): pEnt->device->identifier=0x9ecca60
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(II) fglrx(0): Loading PCS database from /etc/ati/amdpcsdb
(II) fglrx(0): 10BitPixelFormat disabled by default
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.56.4
ABI class: X.Org Server Extension, version 1.1
(--) fglrx(0): Chipset: "ATI MOBILITY RADEON X300" (Chipset = 0x5460)
(--) fglrx(0): (PciSubVendor = 0x1028, PciSubDevice = 0x2006)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xdfdf0000
(--) fglrx(0): I/O port at 0x0000de00
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.1.0
ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 65472 kB
(II) fglrx(0): VESA VBE OEM: ATI MOBILITY RADEON (M24)
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: CP22
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(II) fglrx(0): Using adapter: 1:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x8000000)
(--) fglrx(0): Video RAM: 65536 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): PCIE card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000002, disabled=0x00000000
(II) fglrx(0): Connected Display1: LCD on internal LVDS [lvds]
(II) fglrx(0): Display1: No EDID information from DDC.
(EE) fglrx(0): Unknown EDID version 0
(II) fglrx(0): Display1: Failed to get EDID information.
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - LCD on internal LVDS
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(II) fglrx(0): POWERplay version 3. 5 power states available:
(II) fglrx(0): 1. 297/216MHz @ 60Hz [enable load balancing]
(II) fglrx(0): 2. 105/122MHz @ 60Hz [low voltage, enable sleep]
(II) fglrx(0): 3. 105/182MHz @ 60Hz [low voltage, enable sleep, thermal diode mode]
(II) fglrx(0): 4. 209/182MHz @ 60Hz [low voltage, enable sleep]
(II) fglrx(0): 5. 209/182MHz @ 60Hz [low voltage, enable sleep, thermal diode mode]
(==) fglrx(0): QBS disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 12 modes found for primary display.
(--) fglrx(0): Virtual size is 1400x1050 (pitch 0)
(**) fglrx(0): *Mode "1400x1050": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1400x1050"x60.0 108.00 1400 1448 1560 1688 1050 1051 1055 1066 (64.0 kHz)
(**) fglrx(0): *Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1384 1496 1688 1024 1038 1042 1066 (64.0 kHz)
(**) fglrx(0): *Mode "1280x768": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1384 1496 1688 768 910 914 1066 (64.0 kHz)
(**) fglrx(0): *Mode "1024x768": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0 108.00 1024 1256 1368 1688 768 910 914 1066 (64.0 kHz)
(**) fglrx(0): *Mode "800x600": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0 108.00 800 1144 1256 1688 600 826 830 1066 (64.0 kHz)
(**) fglrx(0): *Mode "640x480": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0 108.00 640 1064 1176 1688 480 766 770 1066 (64.0 kHz)
(**) fglrx(0): Default mode "640x400": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0 108.00 640 1064 1176 1688 400 726 730 1066 (64.0 kHz)
(**) fglrx(0): Default mode "640x350": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x350"x60.0 108.00 640 1064 1176 1688 350 701 705 1066 (64.0 kHz)
(**) fglrx(0): Default mode "512x384": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0 108.00 512 1000 1112 1688 384 718 722 1066 (64.0 kHz)
(**) fglrx(0): Default mode "400x300": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x60.0 108.00 400 944 1056 1688 300 826 830 1066 doublescan (64.0 kHz)
(**) fglrx(0): Default mode "320x240": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x60.0 108.00 320 904 1016 1688 240 766 770 1066 doublescan (64.0 kHz)
(**) fglrx(0): Default mode "320x200": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x60.0 108.00 320 904 1016 1688 200 726 730 1066 doublescan (64.0 kHz)
(==) fglrx(0): DPI set to (96, 96)
(--) fglrx(0): Virtual size is 1400x1050 (pitch 1408)
(**) fglrx(0): *Mode "1400x1050": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1400x1050"x60.0 108.00 1400 1448 1560 1688 1050 1051 1055 1066 (64.0 kHz)
(**) fglrx(0): *Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1384 1496 1688 1024 1038 1042 1066 (64.0 kHz)
(**) fglrx(0): *Mode "1280x768": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1384 1496 1688 768 910 914 1066 (64.0 kHz)
(**) fglrx(0): *Mode "1024x768": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0 108.00 1024 1256 1368 1688 768 910 914 1066 (64.0 kHz)
(**) fglrx(0): *Mode "800x600": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0 108.00 800 1144 1256 1688 600 826 830 1066 (64.0 kHz)
(**) fglrx(0): *Mode "640x480": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0 108.00 640 1064 1176 1688 480 766 770 1066 (64.0 kHz)
(**) fglrx(0): Default mode "640x400": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0 108.00 640 1064 1176 1688 400 726 730 1066 (64.0 kHz)
(**) fglrx(0): Default mode "640x350": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x350"x60.0 108.00 640 1064 1176 1688 350 701 705 1066 (64.0 kHz)
(**) fglrx(0): Default mode "512x384": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0 108.00 512 1000 1112 1688 384 718 722 1066 (64.0 kHz)
(**) fglrx(0): Default mode "400x300": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x60.0 108.00 400 944 1056 1688 300 826 830 1066 doublescan (64.0 kHz)
(**) fglrx(0): Default mode "320x240": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x60.0 108.00 320 904 1016 1688 240 766 770 1066 doublescan (64.0 kHz)
(**) fglrx(0): Default mode "320x200": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x60.0 108.00 320 904 1016 1688 200 726 730 1066 doublescan (64.0 kHz)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.2.1
ABI class: X.Org Video Driver, version 4.1
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x8000001d
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(II) fglrx(0): [pcie] 262144 kB allocated
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(II) fglrx(0): Direct rendering enabled
(II) fglrx(0): Battery is used
(II) fglrx(0): Interrupt handler installed at IRQ 16.
(II) fglrx(0): Exposed events to the /proc interface
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 1.4.x.y with x.y >= 99.906
(II) fglrx(0): detected X.org 7.4.3.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
(II) fglrx(0): DRIScreenInit for fglrx driver
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [drm] mapped SAREA 0x2000 to 0xb7f3a000
(II) fglrx(0): [drm] framebuffer handle = 0x3000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.56.4
(II) fglrx(0): Date: Dec 1 2008
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.28-ARCH
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: no
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0x00004000
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x007b1000
(II) fglrx(0): FBMM initialized for area (0,0)-(1408,1432)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1408,1050) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1408 x 382
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Solid Lines
Dashed Lines
Setting up tile and stipple cache:
22 128x128 slots
(II) fglrx(0): Acceleration enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/modules//amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
compiled for 1.4.99.906, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(WW) AIGLX: 3D driver claims to not support visual 0x33
(WW) AIGLX: 3D driver claims to not support visual 0x34
(WW) AIGLX: 3D driver claims to not support visual 0x35
(WW) AIGLX: 3D driver claims to not support visual 0x36
(WW) AIGLX: 3D driver claims to not support visual 0x37
(WW) AIGLX: 3D driver claims to not support visual 0x38
(WW) AIGLX: 3D driver claims to not support visual 0x39
(WW) AIGLX: 3D driver claims to not support visual 0x3a
(WW) AIGLX: 3D driver claims to not support visual 0x3b
(WW) AIGLX: 3D driver claims to not support visual 0x3c
(WW) AIGLX: 3D driver claims to not support visual 0x3d
(WW) AIGLX: 3D driver claims to not support visual 0x3e
(WW) AIGLX: 3D driver claims to not support visual 0x3f
(WW) AIGLX: 3D driver claims to not support visual 0x40
(WW) AIGLX: 3D driver claims to not support visual 0x41
(WW) AIGLX: 3D driver claims to not support visual 0x42
(WW) AIGLX: 3D driver claims to not support visual 0x43
(WW) AIGLX: 3D driver claims to not support visual 0x44
(WW) AIGLX: 3D driver claims to not support visual 0x45
(WW) AIGLX: 3D driver claims to not support visual 0x46
(WW) AIGLX: 3D driver claims to not support visual 0x47
(WW) AIGLX: 3D driver claims to not support visual 0x48
(WW) AIGLX: 3D driver claims to not support visual 0x49
(WW) AIGLX: 3D driver claims to not support visual 0x4a
(WW) AIGLX: 3D driver claims to not support visual 0x4b
(WW) AIGLX: 3D driver claims to not support visual 0x4c
(WW) AIGLX: 3D driver claims to not support visual 0x4d
(WW) AIGLX: 3D driver claims to not support visual 0x4e
(WW) AIGLX: 3D driver claims to not support visual 0x4f
(WW) AIGLX: 3D driver claims to not support visual 0x50
(WW) AIGLX: 3D driver claims to not support visual 0x51
(WW) AIGLX: 3D driver claims to not support visual 0x52
(WW) AIGLX: 3D driver claims to not support visual 0x53
(WW) AIGLX: 3D driver claims to not support visual 0x54
(WW) AIGLX: 3D driver claims to not support visual 0x55
(WW) AIGLX: 3D driver claims to not support visual 0x56
(WW) AIGLX: 3D driver claims to not support visual 0x57
(WW) AIGLX: 3D driver claims to not support visual 0x58
(WW) AIGLX: 3D driver claims to not support visual 0x59
(WW) AIGLX: 3D driver claims to not support visual 0x5a
(WW) AIGLX: 3D driver claims to not support visual 0x5b
(WW) AIGLX: 3D driver claims to not support visual 0x5c
(WW) AIGLX: 3D driver claims to not support visual 0x5d
(WW) AIGLX: 3D driver claims to not support visual 0x5e
(WW) AIGLX: 3D driver claims to not support visual 0x5f
(WW) AIGLX: 3D driver claims to not support visual 0x60
(WW) AIGLX: 3D driver claims to not support visual 0x61
(WW) AIGLX: 3D driver claims to not support visual 0x62
(WW) AIGLX: 3D driver claims to not support visual 0x63
(WW) AIGLX: 3D driver claims to not support visual 0x64
(WW) AIGLX: 3D driver claims to not support visual 0x65
(WW) AIGLX: 3D driver claims to not support visual 0x66
(WW) AIGLX: 3D driver claims to not support visual 0x67
(WW) AIGLX: 3D driver claims to not support visual 0x68
(WW) AIGLX: 3D driver claims to not support visual 0x69
(WW) AIGLX: 3D driver claims to not support visual 0x6a
(WW) AIGLX: 3D driver claims to not support visual 0x6b
(WW) AIGLX: 3D driver claims to not support visual 0x6c
(WW) AIGLX: 3D driver claims to not support visual 0x6d
(WW) AIGLX: 3D driver claims to not support visual 0x6e
(WW) AIGLX: 3D driver claims to not support visual 0x6f
(WW) AIGLX: 3D driver claims to not support visual 0x70
(WW) AIGLX: 3D driver claims to not support visual 0x71
(WW) AIGLX: 3D driver claims to not support visual 0x72
(II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so
(II) GLX: Initialized DRI GL provider for screen 0

Photoshop CS5.5 freezes after 10 seconds of use every time

Hey everyone,
So weve been going nuts over this! Essentially I work for a big company, and we all have company laptops that we use to work on, which all have essentially the same programs installed on them. I have a Dell Latitude E6530, its running Windows 7, has a Corei7 vPro inside. Im running Adobe Production Premium CS5.5, and all the programs work perfectly fine (like I use Flash and Illustrator as well with no issues.) except for Photoshop.
When I boot up Photoshop (either version, 32 or 64), Ill be able to use it for about 10 seconds and then it will freeze. It will stay frozen until I actually go in and Task Manager the program off. It does not crash. This literally works with anything I do in Photoshop, I could literally have nothing open and go to the Preferences menu, and it will freeze there. I have tried looking up this problem online and I havent seen it as specified as this, I have seen it where people do something specific, like go to save, and it freezes AND crashes. Mine just freezes after ANYTHING I do after 10 seconds of use.
More about my set up. I have 3 monitors linked to my laptop. I initially thought maybe cutting it down to 2 or 1 might help, because it seemed to yesterday for a moment, but today I tried it and I had the same issue. I also have Symantic Encryption on my laptop, but so does everyone else and they can all run Photoshop completely fine. Weve updated the drivers and updated Photoshop and everything to the latest versions.
Does anyone know if Im just doing something very simple wrong that Im overlooking? I have seriously never had an issue this bad with Photoshop before. Let me know if you need any other information. Thanks for your help!

Yes, basically we have all the default fonts installed on our computers, but we use a program called Universal Type Client to get the fonts we need, and UTC grabs fonts from a server and temporarily makes them usable on our computer. But everyone has this software so I dont think that would have anything to do with it.
Could it possibly have something to do with my Video Drivers or Graphic Cards? Our tech guy mentioned it was strange that my computer had two different things (I believe he said I have a CORE i7 vPro and Nvidia NVS 5200M or something and that they may be competing?) or the amount of monitors Im using?

Macbook pro freezes after sleep, after 6 months of not having that problem

Hello,
I'm really frustated with my macbook pro. Like the tittle says, my computer freezes after waking up and the only thing to do is use the On/Off button. It is a macbook pro '13 2010.
This problem first happened around 6 months ago. Around Feb '11, i experienced the same issue. First thing i noticed was that the wifi suddenly stopped working. To try to fix it, I turned airport off and then couldn't turn it back on and had to restart my machine. Then when closing the lid and then opening it again, my computer would work for about 5 min and then freeze. Nothing worked and I had to shut it down using the power button. Then the problem got worse because the computer started freezing randomly. I know it wasn't an application problem because it happened using different apps. I took my computer to an authorized apple service provider and they told me the harddrive had some bad sectors i think, and they replaced the harddrive because I was still under earranty at the time.
Now, Sept '11, the problem came back. First the airport problem happened and now my computer freezes when waking up, the exact same thing that happened 6 months ago. I went to disk utility and repaired disk permisions and still no solution. My warranty expired last month so calling apple won't be of any help. I installed lion the day it came out and was working without any problems until now, so I don't think lion is the problem.
Has anybody had this same problem with their computer? I don't know what to do or how to tell if my harddrive is causing the problem again.
Thanks

All of the new unibody MBs/MBPs can use (6GB 4X2GB)
But yes you should definitely make sure the RAM is seated correctly and you didn't touch the gold part of the RAM during installation. Though if something was seriously wrong it would have made loud obnoxious sounds while you tried to start up.
Aside from Installation issues, you should reset the PRAM as noted previously. Hold down command-option-p-r at startup until it chimes twice.
OP, looking at Super Talent's website they don't even have 1066MHz chips listed in their DDR3 chips. All I see is a jump from 800MHz (DDR2) to 1333MHz (DDR3).
Either way, I can't imagine you got that great a deal for the RAM that even if it is seemingly the correct RAM you can get better deals in the links I posted in my other post.

Freeze after import from built-in iSight

I go to File > Import from Camera..., record my lovely visage, and then I click Done. iMovie imports the new video just fine, I see it pop up in the little clips tray, but then I'm faced with a problem.
The capture window is still open and if I click the "Done" button or close the capture window, iMovie just freezes and I have to force quit.
When I re-open iMove, everything is fine, my project and the new clip still exist, but I've just wasted a lot of time.
It happens every time and it's really frustrating. What's going on?
Console offers little of interest...
3/28/08 12:51:43 AM iMovie[19101] CFDictionaryAddValue(): immutable collection 0x2630a390 given to mutating function
3/28/08 12:55:01 AM com.apple.launchd[169] ([0x0-0x38c38c].com.apple.iMovie7[19101]) Exited: Terminated
Message was edited by: Iynque

There are a few other threads out there based on iMovie freezing after importing, but most are people importing from other devices, not the built-in iSight camera. None has any good advice about how to correct it, that I can see.
I suppose the good news is it's not a problem endemic to the iSight camera capture option itself. I'm willing to bet it has something to do with disk fragmentation or dropped frames during capture -any of which a standard NLE would tell you about instead of crashing.
I guess the usual salvo of countermeasures are called for: verify the target volume using disk utility, defragment the drive, try building a new user account on your Mac and try the capture again (just to rule out any unruly preferences in your current config). Worst case, reinstall iMovie and see if it keeps happening. Now, having said all that, I haven't actually taken the time to try it myself. So, grain of salt, and all that.

Z10 freezes during start up

My z10 freezes during start up. First I can see the red led on, then the BB logo and "blackberry" on the screen and it stays there forever.
I have tried to update the OS, using BB update software option, at which after resetting my Z10 the green led stays on, though I cannot update it, getting the error message "error downloading Blackberry Desktop Software".
Any ideas ? I need to recover information in the phone's internal memory.
Thank you !!!

So I did the Disc Utility, and the disc was sucessfully repaired. I restarted the iMac and got to exactly the same place as before: "Login window started" where it froze again. I turned it of, restarted in Safe Mode and it froze at the same spot.
Is the next step to try reinstalling the OSX? I didn't see an option to install in place ie leave all my files intact. There's an "Archive and install" option. Does this just archive the system folder and erase all my other files. I'm pretty much backed up but I'd much prefer not to erase the files if I can avoid it.
Thanks

Z10 freezing after a call

Similar Messages

Maybe you are looking for