Z10 hard to hang up incoming call

why z10's screen too minimalist, so thete is no button for hang up incoming call. it is not easy to scroll down the sreen for answering incoming call. at last my incoming call become miss call. can you fix it?

My "hang up"button is right there at the bottom. When you scroll down are you putting your finger right on the bar? And... are you sill on 10.0 OS? It's a little pokey.

Similar Messages

  • Iphone hangs when incoming call

    each time my phone has an incoming call, the phone hangs. I cannot slide to answer the phone. What happens?

    Hello Recently, I started experiencing problems with my iPhone 4. Sometimes, but more and more often, I can not move the slide to pick up the phone. and this is not a problem the screen, as in any other application, the screen is perfectly responsive to clicks.
    and it became yet worse now - slide is moved but raising of tube does not take place. such problem I sometimes notice for the users of not dear android telephones, but I did not buy a telephone after 600$ in order that to test the same problems. when this situation happens - I look as a blockhead nervously trying to heave up a tube. more frequent than all it does not turn out and I have to ring up a subscriber.

  • Phone hangs on incomming calls

    about every third phone call that comes in I cannot move the slider to answer and then I loose the call, all this has happened after I added the version 2 of the original Iphone can anyone help please

    I also have this issue. When i slide the answer button over, the screen goes blank and nothing... the persons trying to call me say that they get a message that says something about "the person you are trying to reach is out of service" and are not sent to my voicemail. this makes me think that it's not only a bug on the iphone, but also a network issue?
    also, i experience a ton of dropped calls or call errors. this is ridiculous! it makes me kinda regret switching over from my old treo on verizon (where i never had dropped calls, and rarely had bad reception).
    please give us the update we need APPLE/ATT!!!

  • Caller ID for incoming calls NOT displaying name from contacts (only displays phone # on BB Z10)

    on the Z10 Whenever I receive an incoming call, the caller ID only shows the phone #, even when I have that number matched to a contact in the phone, even the call log it show the number and not the name.  How do I get the caller ID to recognize and display the appropriate contact name with the phone fro an incoming call? Any help would be greatly appreciated!  Thanks, Akhanbilal

    Thank you Arsen but, as with everyone else : (1) When you get an in-coming call, it has no call log on the phone app call log that allows you do a thing under the sun except to touch the number of the last call, and when you do, it CALLS THEM BACK. (2) On every other BlackBerry I have owned, about 10 to-date, I simply selected the last in-coming call and had a button at the bottom of the screen to allow me to ADD TO CONTACTS. (3) This does NOT exist on the Z10, and there certainly is no "Click on number, little slider pops on the right, select add to contact."  Instead it dials them.  Frustrating other uses have described Arsen. Further, while on the topic : (4) None of this has anything to do with 10-digit national dialing plan or anything else on swipe finger down from top in Phone App, Arsen. (5) When you swipe Phone App down, you see SETTINGS. Then, there are 13 items.  I have looked at all 13 items and see nothing as you describe to select, nor any instructions on what to set the SMART DIALING to when there are 3 area codes local for my city and country code shows +1. Further, while on topic here : (6) Visual Voice Mail has been turned-on and whatever visual voice mail is, never supported on any previous BlackBerry including my 9780 before this, I have it with T-Mobile and have it turned on on the BlackBerry Z10 and it too does not work.  On the positive side, I do have a work-around for BlackBerry Z10 to 2013 Toyota entune. (7) I first took a vm msg .wav file of just hello (blank will not send) and saved it on BlackBerry Z10.  The Toyota entune is LOOKING for a music and will LOCK-UP if none are found.  By giving it this, it worked on my 2013 Toyota entune for the 1st time ever.  Yeah !  It is a little frustrating every few minutes listening to myself say HELLO.  But, hey no one really notices it with all the other stuff going on NAVIGATION, radio, cell phone calls, and all the computerized alerts on 2013 Toyota even without entune. (8) What I did now was to go into Navigation and remove SYNC with MUSIC.  I accomplished that after pairing to Z10 to 2013 Toyota, by CANCELLING ALL CONNECTIONS leaving only the pairing itself.  Then, you must choose some connections in the pairing section of SET-UP within Navigation itself.  If you cannot even get to that point, try depressing on the Navigation Screen, INTERNET at which point it will allow you access to SET-UP when you see the message NO ENTUNE APP FOUND ON YOUR BlackBerry Z10.  Red-headed step-child is what we all are.  Have to help each other.  Arsen I appeciate you helping all of us.  Seems the list is about 20 who have voiced it here in this one thread.  We voice it for the 200 million BlackBerry users worldwide, all left out in the cold despite a pretty cool Z10 product. Far better than iPhone 5.  I chose phone and internet.  Internet comes back no BLACKBERRY Z10 TOYOTA ENTUNE APP.  But, at least now I don't have to hear the music HELLO and do not also have the BlackBerry Z10 LOCKED-UP with pop up message you have to say OK to 10 million times to clear and never can actually do a thing on the BlackBerry Z10 as  a result.  Cannot add an in-coming call to Contacts Z10. Cannot see name and number calling me, just the bloody number, no clue who is calling ridiculous. Cannot do diddle-e-squat on BlackBerry Z10 on Toyota entune.  No App.  Horrendous. TAGS : Z10 no caller-id name, Z10 no app Toyota 2013 entune, Z10 add call to Contacts

  • I can't put call on hold to answer incomming call, always hangs up on first call

    I can't put call on hold to answer incomming call, always hangs up on first call

    The procedure is different, depending on whether your carrier uses CDMA or GSM. Consult the manual. gdgmacguy gives directions on how to find it in the post above.
    Best of luck.

  • IPhone3GS screen white and look hang, while some Incoming Call and SMS

    Hi All,
    I don't know what happen on my 1 months old iPhone 3GS. Its hang and Screen became white (nothing can see just white color), while some times in Incoming Call as well as SMS, at the time I can't pick up phone call and can't see sms, because of screen is WHITE.
    Please help me some tips and advice.

    Thanks Phil,
    I feels as strange, sometime happen and sometime may not happy,
    in that situation, I need to press top (lock-unlock) button and after 20 seconds, it would be ok, SMS is ok for that situation, but I've missed some incoming call.

  • HT1222 I have iphone 4 and the software is ios 7.0.2. I am facing problems with my phone. Since the last software update my phone has started giving problems. like it hangs sometime when i recieve an incoming call. The carrier status bar shifts down a bit

    I have iphone 4 and the software is ios 7.0.2. I am facing problems with my phone. Since the last software update my phone has started giving problems. like it hangs sometime when i recieve an incoming call. The carrier status bar shifts down a bit and sometimes it vanishes automatically. I,m confused.
    Secondly i have an update IOS 7.0.4 waiting in my Software Update menu. I have tried so many times to update my iphone but it always fails to update the IOS 7.0.4. Any body suggest anything regarding this

    Wow. Lots of help. Thanks apple

  • Z10 not answering incoming calls

    I have a weird new issue with my z10 (my only issue so far). When an incoming call happens, the screen goes to the PHONE app and freezes there. I cannot do anything to answer the call. Then when the person leaves me a voicemail, I can't get the dialpad to appear to put in my voicemail password. The screen is still frozen on the PHONE app page. I can close that app but the call remains open and if I click on the call (at the bottom left of the screen), it simply goes back to the PHONE app page where I can't press on anything or do anything except swipe up to close the app.
    Solved!
    Go to Solution.

    Did you reboot the device by removing the battery?
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • NEW 9320! CURVE HANGS ...!DURING INCOMING CALLS! NO BUTTON WORKS! PLS HELP ME

       Recently, i was purchased New 9320. I am very much fedup with this new 9320The phone completely hangs during my incoming calls , no button works & nothing happens. . Each and every time I’ve  to remove the battery & reboot 4 to 5 times.
     This happened once when it was in the holster too ,said “keypad locked” and nothing except the power off button worked (the power off button did nothing to help though)
        This is frustrating ,especially for a first time Blackberry user like me
       Is it a software problem with the 7.1 OS or something else? Please any one help me.

    That is what I am doing right now, but thats a short term solution. It happens 7-10 times a day. Have to do this exercise again and again.
    Is not there a permanent solution for this problem ?
    Thanks

  • Hi Guys, suddenly I am not able to hear on my iphone 3GS whenever I receive a incoming call(it's very hard to hear wat the other people us saying)

    Hi Guys, suddenly I am not able to hear on my iphone 3GS whenever I receive a incoming call(it's very hard to hear wat the other people is saying)

    I had my GENIUS appointment today. They did a couple of tests by plugging my iPhone into a macbook and both came back without showing problem. However as the genius was working with my phone he ran into the same problem with 3G and I had taken some screen shots showing full signal strength but unable to make a call, failure to send mms, and internet unable to connect, so he switched out my phone for a new one as I am still under warranty for another 3 months.
    Make sure you backup your data and restore your phone as a new phone before going in to see a Genius, otherwise they may choose to try that process first and do some diagnotistic tests before being able to switch it out, and that can take up to 4 days.
    Best guess by the Genius was that it was a hardware problem with the internal cellular antenna. He also recommended I get a new (free) SIM card from AT&T which I did (kiosk was in same mall)
    So bottom line...if your 3G is messed up, make an appointment with Apple Genius. Thanks to all who tried to help, but mostly thank you apple Genius for great customer service.

  • My iPhone5 is under warranty but during incoming call handset is hang. this problem 2-3 time a day. pleas help.

    My iPhone5 is under warranty but during incoming call handset is hang. this problem 2-3 time a day. pleas help.

    I'm experiencing what is I believe to be the same issue with my iPhone 4, and have been suffering in silence for about a week.
    iPhone 4 model MC603X with Modem Firmware 04.10.01, 16Gb, cheap silicone cover, Vodafone NZ as my carrier.
    My screen locks after 1 minute of inactivity as it should with my settings. Perhaps 1 call in 5, or 1 call in 10, the screen wakes up and displays called ID information etc correctly, but I cannot swipe to answer the call. The touch screen simply fails to respond.
    If I push the power button briefly to silence the ringtone, this does not make a difference. The iPhone has to be locked (and screen turned off), then push a hardware button to wake up the display, and then I can swipe to unlock the device.
    This is only since iOS 4.3 and unfortunately iOS 4.3.1 has not changed this behaviour.
    Any advice appreciated.
    Cheers, Mike

  • E71 Hangs while receiving an incoming call

    Hi Guys,
    I have recently bought an E71 and have been facing a peculiar problem since day one. My phone at times (2 out of 10 times)hangs when receiving an incoming call and reboots automatically. On contacting the customer care I was told that I may have installed too many applications but the fact is that I am using my E71 as a very basic phone as of now - any ideas what is wrong with my handset? Is anyone else facing the same issue?
    Thanks,
    Nishant

    My log on my E71 is set for 30 days and my phone has not hung on an incoming call at all (or anywhere else).
    But I dont get lots of calls so what Mbang is saying is still valid.
    There are a couple of things you could try additionally. First if the Nokia Software Updater will let you - try and reinstall the software, also you could also back up your handset and restore the phone back to factory conditions.
    How to do that is here:
    /discussions/board/message?board.id=communicators&​thread.id=11416
    Remember, if you do that - and you have not backed up then you will lose EVERYTHING on your device, pictures messages mail etc.
    If its still doing it after that then it would appear that there is a problem with your E71 and I would then suggest that you take it to the nearest Nokia Repair centre.
    Shunts...
    I will mostly be communicating with a Nokia E72 Zodium Black
    Nokia E72-1 with Vr 051.018.207.04 Software
    If this post helped... Add some kudos!!

  • How I can hang up an incoming call using the IO7 ?

    I'm using the IPhone 5 , and updated to software iOS 7  ; V 7.0.2
    earlier in the previous iOS6, i was able to hang up an incoming call while the screen was locked. But now i can't. The only thing possible is just mute the ringing tone.
    Is it possible in the iO7 to hang up an incoming call ?

    Tap the Sleep/Wake button to silence the call, a double tap sends the call straight to Voicemail.

  • Blackberry Z10 Contact names not showing on incoming calls

    My blackberry Z10 is not showing the contact names when I receive an incoming call. My country code also correctly selected. Contacts are not duplicated also. But contacts without the leading 0 is showing

    Hi mhusni,
    Welcome to the BlackBerry Support Community.
    When using the country code included in the phone number field of contacts, you may not be able to see contact names on incoming calls even though the country code is correct.
    This KB article may provide more information. "Caller ID does not show associated contact when country code is included in phone number" http://blackberry.com/btsc/KB33685
    Let me know if you have any other questions.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Hangs up on incoming calls!

    Half the call I receive are disconnected, I either touch the screen or touch the volume button and the call is ended. I have tried three different cases and even put the phone in my shirt pocket. I talked with a sales rep. on the website and the response I got was, find a phone you like in your price range. Frustrated I went to the local Verizon store and picked out the Thunderbolt. I guess I'm stuck with the phone until my contract is up.

    There may be something in this previous thread that may assist you with Locking Up on Incoming Calls.
    While it deals with blocked calls I think that it may apply to your situation as well.
    http://discussions.apple.com/thread.jspa?threadID=1093612&tstart=30
    mikeab

Maybe you are looking for

  • Unable to Deploy a Webservice.

    Hello All, I created a java bean and put the implemented code in some of the methods etc. ( By the way the code is generated using a WSDL using the SAP Netweaver libraries ) Now when I attempt to actually create the webservice out of the implemented

  • Powershell update Field Value without changing version number

    I want to update a value in a field in a list for a lot of list items. However, this list has major and minor versioning turned on, and an approval process. When I update the field's value for all the required list items, I don't want the approval pr

  • Error in Project Progress Config and process steps

    Hi experts, I am implementing PS for Asset procurement, in this i will procure material against material component which is added in Internal activity. I am using scheduling also. Now My client requirement is that he want project progress report on c

  • Can you post an iPhoto slideshow to a .mac website?

    Can you post an iPhoto slideshow to a .mac website? Thank you so much!!!

  • Query output in Excel

    Hi ,     I have a job with number of queries. I need that output of the query in an excel format to a location whenever that job runs. Help me out.