Z10 OS 537 reset/reboot issue

Hi People,
This is my first post here, so please have patience with me.
I have had my Z10 since June, and I have had issues regarding unprovoked resets, once or twice per day.
I have not seen any clear patterns. I have experienced it doing it in my pocket, but also often when I put it on the table, I have been tapping the device on the table 50 times in a row to mimic when it reset, however I have not been able to reproduce the reset. It happens completely random. I have some strange 3G radio behaviors where I loose connection but gets it fast again. The two does not (unfortunately) seem to be directly connected.
I have factory reset the device, reloaded OS'es, battery pull, soft reset etc. but to no avail. The darn thing still resets at random.
Can you guys help me, my retailer will turn the device on and let it sit for half a day, and if it does not reset he will bill me 100$. So is there anything official from BB stating that there is a problem or do I just have to take the chance?
Thanks in advance
/Q

i have the same problem.
And only with z10, this problem started several months ago, and i thought it was maye due to some apps installed on my phone, or maybe using some leaked rom, then i tried:
1. Rollback to official rom
2. Wait for the next update
3. Remove all applications that could be faulty.
The device resets randomly, it can stay several days without restarting, and one day it can reset three or four time in few hours.
And after these reset the boot time is very slow, 5/7 minutes takes to fire up the device.
I also noticed that (i'm not sure if it is a rule) when the device is started the wifi is turned off (but i have to check if this happen everytime).
WIth the Dev Alpha B i haven't that problem.
My model is:
STL100 -2
The Os Version is: 10.2.1.2102

Similar Messages

Unable to install any apps..did reset, reboot, restore but nothing works

unable to install any apps..did reset, reboot, restore but nothing works

so you want to restore as new not from a back up and then try to download a application. the purpose for this is the fact that if you restore from a back you then your just putting the save soft ware back on your phone. and if soft ware is the issue then this step just got voided out. if that doesnt work or you did do that then it can be something hardware related and it can be replace through apple for free if your under the hardware warranty

MSI 970A-G45 reboot issues

Just did an upgrade to my PC.
Running the following:
MSI 970A-G45
Athlon Phenom X4 955 at Stock speeds(used from previous rig)
Corsair Vengeance 8GB PC12800 DDR3 1600MHz at Stock speeds(new)
XFX Radeon HD 6870 1GB GDDR5(new)
OCZ 120GB SOLID 3 SERIES SATA III 2.5 Hard Drive
Sony DVDRW 24x(used from previous rig)
BFG 550W PSU(used from previous rig)
Windows 7 64bit Ultimate
Here's the issue. Sometimes when I restart the PC, it never comes back up. It goes down like normal, then I have no video signal and it just sits there. It's doesn't happen all the time though, which is perplexing. When it does not come back up, I can simply hit the reset button and then it starts to boot up. Apparently it has all the latest BIOS and drivers according to MSI Live update. So at this point I have no idea what to try in order to get this thing to restart normally every time. I guess I shouldn't be too concerned considering I don't reboot a lot...?...?
P.S. I am not overclocking anything. Processor and RAM are running at stock speeds.
P.S.S. I do have two USB hard drives hooked up. Could one or both of them be causing the random reboot issue?
P.S.S.S. Although I mentioned the USB drives, I never had this reboot issue prior to upgrading to this motherboard, video card and ram.
THANKS!

Hello,
Having the same issue with similar hardware. PC will boot cold and shutdown like it should but restarting most of the time causes the system to hang with no video but the fans run and MB LED's are still lit. Pressing the reset causes the video to restore and POST and a normal boot. I tried an old video card to eliminate a video card problem but it does the same thing. Here is the hardware I'm running, I just built it today.
MSI 970A-G45
AMD Phenom II x4 955 BE (not OC)
MSI AMD Radeon 6770 1GB DDR5 (Not OC)
Kingston HyperX Blue 4GB DDR3 PN:KHX1333C9D3B1/4G
LiteON 24x DVDRW (SATA)
WD Caviar Blue 6.0GB/S 250GB HDD
Cooler Master Extreme Power plus 500W PSU
I would post CPU-Z stats but I cant figure out how to attach images. help?
Areamike,
To adjust the command rate you have to go into the overclock tab and go into advanced DRAM config. If I can remember right you may have to adjust another setting away from AUTO to be able to access this menu. (i would be able to tell you for sure but I cant look at BIOS and be on the forum typing at the same time.lol) After having this problem I read a lot of reviews with people having trouble with this board, hopefully its just a setup problem for us.
-RickyB

Freezing and Rebooting issue - Hardware or Softwar...

Sorry if this has been asked before...but...
Is the freezing and rebooting issue caused by a fault in the Hardware or Software...?
Can someone from BT please explain just exactly what is going on.
Thank you,
wdp

sarahoxford wrote:
Just been on live chat as we are fed up of freezing up, random reboots and failed recordings. Usually happens on Gold, Sky Sports - the non freeview channels. Advice from Geetesh was factory reset thus losing existing recordings, stating rather optimistically that this 'will resolve the problem'. When pushed on freezing and failed recordings issue Geetesh said recording of 'internet channels is in a test phase so won't be able to record'?? But we have recorded on gold, fox for example - response is that it won't always work, only for some customers.
The advisor was getting confused. The bit about recording broadband channels still being in test phase only applies to BT Youview boxes. The recording functionality has been available for broadband channels on the BT Vision+ boxes since they launched last January.
To answer the original question. The occasional freezes and reboots are caused by the New Look software (possibly in conjunction with associated system changes on the BT servers). Many of us had years of trouble free viewing using the Classic software on the same black BT Vision+ boxes. It was only when we were upgraded to the New Look software that all the troubles began. If however, you are getting such problems many times per day, or even many times per hour that could indicate a hardware fault.

I updated my Iphone 4s to IOS 7, now it reboots after every 2 minutes, I tried to restore, but the reboot gets it disconnected from PC, help me solve this reboot issue..

I updated my Iphone 4s to IOS 7, now it reboots after every 2 minutes, I tried to restore, but the reboot gets it disconnected from PC, help me solve this reboot issue..

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.

Firefox 3.6.23 having freezing and rebooting issues with Adobe Flash Player 11 Plugin

Firefox 3.6.23 is experiencing constant freezing and rebooting issues with Adobe Flash Player 11 Plugin, not sure if it is a conflict issue or not.
Since the update there had been no reported issues till today when the blue screen came up on me, this issue prior to plug in 11 had occurred at least 6 times, this issue only happens on firefox.
I do not wish to update since recent firefox browsers seem to have a lot of ongoing issues.

Anyone able to help please?
Thanks.

WET54G locking up - requires reset / reboot

Hello all
We use (10) WET54Gs at separate locations to provide network connectivity to our copiers. All of the units are V2 with the latest updates. Each WET54G will lock up after random period of time, usually a few weeks, and then require a reset/reboot to reestablish communication.
Has anyone else experienced the same problem? Have any suggestions on a fix?
I would think this is a hardware of firmware problem since they have a perfect track record of 10 out of 10 units repeatedly locking up.
Thanks

Well i dont think all the 10 units of WET54G will have the same problem. May be you must try to check the settings of your wireless router, if required try to upgrade the firmware of your Router.

Mail & Calendar frozen - reset/reboot/restore does not help

My mail and calendar apps do not work - cannot send or receive mail from yahoo, gmail and exchange. Cannot sync with exchange calendar or create appointments. When Intry to access any of the "Mail, Calendar, Contacts" settings - the General Settings app freezes and I have to restart. I have reset, rebooted, restored...to no avail. I am on version 5.1.1.
I also have an iPhone 4 configured to use the same mail and calendar accounts in the same way and have no problems.
Suggestions appreciated!

I've had the same problem for about 2 weeks now. it'll sometimes freeze. i converted back down to iTunes 6.0.4 from 7.0 and still the same thing happens. i've had this for almost 2 years and this is the first prtoblem i've had w/it. i wish there was an easy solution. nothing seems to work. when connected to my mac, it doesn't show up in iTunes and soemtimes not even the desktop. it's very troublesome.

Macbook pro Retina 15" reboot issues

Hi all
I am a newcomer to the community.
Right I've had the my brand new macbook pro retina 15' since the begining of september 2014 which came with Mavericks.All seems fine back then
I did the terrible thing and upgraded to the yosmite when it came out and I've starting to have issues , with the wifi dropage etc etc
My most recently issue which has come to light is that , after I've RESTORED Yosemite many times (yesterday was the last time) when ever i use the computer and then reboot after few minutes to some time the computer takes super long and hangs at rebooting???????
I get a that "progress spinning chopped up circle thing" staright after i reboot and sometimes it just hangs there with the Fans going full blast till i need to hold the power button down! like what the ****
does anyone have this issue? or know how to resolve this? or do i need to bring it back to apple?
My macbook is top spec 15 inch Mid 2014 one with only the minus of the 1tb hard drive upgrade , however i feel its should not be having these problem.
I must admit since i have the macbook pro , I've used Parallels a lot , bootcamp and FileVault encrypting (which is now turned off) testing things out. i thought as this is a top spec it should handle this no problems as i got this for a development machine. Ever since Ive got Yosemite its like its slowed down and become sluggish.
When I had maverick i did not experience a ton of problems like Yosemite, it booted up in 8 secs and shutdown immediately althought i did not test the file vault encrypting under mavericks.
Also sometimes when my Fans will be on full blast when i am not doing anything intensive, like when i browse with chrome or finished with parallel.
I be grateful if anyone can help me solve this since its now not a issue of restoring which I've done many times. I dunno if I've pushed the SSD to to much or something......
Is there a way to revert had to mavericks? without a usb or cd
Thanks
Zyco

Before trying to go back to Mavericks, try performing an SMC and NVRAM/PRAM reset. These two components control several functions of your MacBook Pro and by resetting them to their default values it may clear up the issue that you're seeing.
To reset the SMC:
Turn off your computer and ensure the MagSafe adapter is plugged in.
Hold down Shift-Control-Option on the left side of your keyboard, and then hold down the Power button at the same time.
Wait about 5 seconds, and then release the keys. You may see the light on the power adapter change colour momentarily.
Don't turn the computer on just yet, we'll do that in the next step.
To reset the NVRAM/PRAM:
Press the Power button and then immediately hold down Command-Option-P-R on your keyboard at the same time.
Continue holding these keys until your MacBook Pro restarts and you hear the start up chime a second time.
Release the keys and continue booting into OS X.
If this doesn't work, try booting into Safe Mode. This will help you determine whether a software issue is causing your problem. To boot your Mac into Safe Mode, restart the computer and hold down the Shift key until you see the Apple logo appear on the screen. It may take a little while longer to boot up as OS X will verify the state of your disk and clear out certain caches and temporary files. Once booted into Safe Mode, try restarting and see if the issue persists.

FSCK and reboot issues with external USB drive

I'm having an issue with an external USB hard drive I'm using. I've always had issues with this drive cause my reboot to "freeze" when it's mounted. Basically the system message with be sent out, but it doesn't actually proceed with the reboot. No switch to init 6 or anything, but the shutdown process is still active. I can continue to use the computer as usual, but I can't cancel the existing shutdown or try to enter init level 6 by hand. So I just got around this by unmounting the drive before I shutdown. However, lately when I try to unmount the drive I get an error saying that the drive is in use and I should check to see what processes are using it by runing lsof or fuser.
Yesterday I tried copying dsome files from the drive but there wasn't and activity on the drive. cp didn't report any errors though, it just sat there and did nothing. I tried running fsck on the drive, but didn't get much farther. I'll see some activity on the drive for about a second, then all activity stops and fsck just sits there. When I try to kill fsck, it won't. Even with a kill -9.
I'm really confused as to what is going on. Has anyone else had this problem? Anyone have any ideas what could be causing all this or what I can do to stop this? Thanks in advance!
David
[email protected]

Press the reset button on the device. It is located between the USB and power ports. Make sure to take-out the external USB drive before you reset the device. Or you can also restore the defaults by accessing the Administration tab > Factory Defaults sub-tab in the router’s web-based setup page. Check out this link for the set up; http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=32cffead811249aea7e9fc6730bf59ad_KB25681_EN_v1.xml...

Occasional resets/reboots and black screens

Hi everyone....
I have a slight problem with my computer that I hope that you people can shed some light on...
Most of the times it happens when I´m running a game (mostly BF1942), but it has happened when I´ve been using "normal" windows programs (like word, VB6, photoshop etc.)
The difference is that when I´m playing a game and the computer resets it exits the game and drops me on the desktop.
When it resets and I´m not in a game but only another windows prog, it will reboot the computer
O yes, the monitor. It can fade out both in windows and in-game
The monitor "clicks" and fades to black, then it comes back after 1-2 seconds.
I´ve been thinking that it might be a problem with my PSU (especially regarding the monitor issue since the G-card need it´s share of the power) but I´m also started to think that it might be the memorys that´s making this problem.
Any ideas??
(I just noticed that my memory settings isn´t on my sys.info, so I will update that when I come home from work)

Well I must say that by Far, the Best PSU for the Money $99.00 US, is the Enermax 465 EV (I just bought one myself) and you can Even get an Enermax with Dual +12V Rails ..Thats Right +12V-1 (For the System) and a +12V-2 (Just for the CPU).....And I have had Nothing but Members PMing me to that me for Pointing them in the Direction of the Enermax 465 EV>> This Guy Really Liked his New Enermax > https://forum-en.msi.com/index.php?threadid=41492&sid= ..Or you have $200.00 + US to spend, You can get the Absolute "Best" PSU at http://www.pcpowerandcooling.com and get the "Turbo Cool 510W Deluxe... This is the "Turbo-Cool 510" vs. Antecs 550 W True Power>> http://www.pcpowerandcooling.com/pdf/Turbo-Cool_510_vs.pdf .............Sean REILLY875

E7 Resetting/rebooting itself

I have the random reboot problem with an added twist. Occasionally when it reboots the touch screen doesn't work and I have to manually reboot it.
Other interesting twist! Every now and then it brings up a message something on the lines of "error installing, widget removed" and then it looses all my home screen settings and messages. This doesn't appear to coincide with an actual reboot.
Due to the posts I have read on here I am loathe to do a format and reinstall. This started after trying to install the "Mobile Docs by Visiarc" - which didn't install and was the first time I got the above error.
Is there any news on a FW fix for the hard reset broken ROM thing?
Solved!
Go to Solution.

What you could try is the delete and restore function on your E7. This feature should not do the same critical thing as a hard reset. Be sure to back up your contacts, messages etc with ovi store first. Hopefully your device will stay on long enough.
Although, If it does not work out you should take it to a Nokia care point. Luckily I had one nearby and they used 1 day to reflash the device.
It could also be that your device suffers from a hardware failure which occured at the same time you installed the app.
I had to do the hard reset after my E7 refused to boot.
For the error message about widgets. I got that as the hard reset deleted much of the preinstalled content on my phone and some of the widgets which were in use. So when I started the device and the widget was still on, the phone would display an error message due to the fact that it could not find the widget which were supposed to be shown on the homescreen. Removing that widget/empty widget, made the error message go away. However, it does not sound like it's the same issue as the widgets should be there unless you have deleted those.
So, I guess we are talking about a hardware failure or the failed install of the app you've mentioned caused a severe corruption causing all this.
If the reset which you find in menu-settings-phone-phone management-factory settings does not work, I believe you will have to take it to a Nokia care point. As the fix for Ovi store is not yet released, I would not bother doing the hard reset as it isn't really a user approved action, and may result in that you will have to pay for the reflash.
I got it free as the was the only thing I could do after it refused to boot. - Which was an error within warranty.

G56-125NR REBOOT ISSUE

I recently swtiched out my hard drive in my HP G56-125NR LAPTOP. I also purchased the HP reboot kit, as I did not have backup disks. When I use the Reboot disks, everything goes fine, it loads both disks plus third disk thats included. The issue is once Windows starts to load software, my laptop seems to freeze with the restart message on the screem (message box: restart now, restart later). The thing is, i cannot click with the mouse or simply hit enter to proceed. So my question is. should i wait, and it will restart on its own? or is there some combination of buttons I can hit to make it restart? any assistance is appreciated.
Thanks

OK. It would have been nice if you had shared that important tidbit of information with me.
After you replace the hard disk and install it to the same SATA port it was connected to, do you connect power, press the power button and then immediately tap the Esc key to enter the startup menu?
While in the startup menu put the first recovery disk in the DVD drive.
In the startup menu you have to select F9 and in the following menu choose the DVD drive as the boot item. After this. the DVD should boot into the recovery manager. Now you should just have to choose the type of recovery you prefer recovery and follow the prompts to reinstall the operating system.
The differences between System Recovery, Factory Reset and Minimized Image Recovery
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Blackberry z10 & z30 text and call issues

Recently my blackberry z10 wont tell me I have a text and if I do see a text I cant open it. Also says call service provider when im trying to make calls. .the text issue sometimes I get atext and sometimes I dont. Sometimes I can open and sometimes not. Our z30 is same issue w text . Also z30 wont let me delete anything in hub. Emails ,texts etc. When I delete it does nothing . The text issue is bad. Started 24 hours ago on z30 and a few days ago on z10. Tmobile and simple mobile networks. We are experienced bb users. Anyone know what is going on. We rebooted and same issues. Thanks

Thank you for your update.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

More "Power light on but no reboot" issues.

Hi everyone,
Sorry if this is a redundant topic. I have scoured this topic over the last few days and have see that this is quite the issue. Same problem as everyone else...turn on the power button...light comes on...computer does not boot...after a few minutes, the fans run at full blast. The consensus offered on other post seems that this is a power and maybe a logic board issue. No? My main concern is where I will lose the data on my HD once this is fixed?
What's amazing is that there is another thread on this forum discussing what may be a related. http://discussions.apple.com/thread.jspa?threadID=537819
Anyway, my G5 2.0ghz is a late 2004 model. I've done the tutorials as suggested from other post and Apple articles. From my research, I gathered that by resetting the SMU, this would fix the problem, but it has not. Have not opened the side panel yet, as this solution seem to apply only to late 2005 models of the G5 as indicated by an Apple article it read. Could I try this on my late 2004 model? I also unplugged the power cord from the computer for about 30 minutes and tried to restart, but same problem.
Here's some other info that may have led up to the problem. A few hours before the G5 went out completely, the computer became non-responsive. Solution, Press the power button to restart. Then small transparent black window appeared out of nowhere on screen I was viewing indicating that I should restart my computer. I did this and it rebooted fine. Shortly after the reboot, some technical data that where random tech words and characters and number appeared on my screen in a scrolling manner. I pressed the restart button on the G5 and that's when the problem of the computer not rebooting, but the power light coming on.
Thoughts anyone.

Sounds like you had a kernel panic, something is wrong.
Follow these links and see if that helps
http://docs.info.apple.com/article.html?artnum=300341
http://docs.info.apple.com/article.html?artnum=106464
If your machine has a PMU or SMU, it's the same process. Push it firmly just once for a few seconds.

Z10 OS 537 reset/reboot issue

Similar Messages

Maybe you are looking for