Z10 screen does not rotate after upgrade

I don't know if I need to do something for it to work
Solved!
Go to Solution.

Once check your device RotationLock is on or off.
Press like if this solve your problem.
Dharmender Singh

Similar Messages

  • Ipod touch 3g screen does not rotate after update

    after upgrading my iPod Touch 3rd Generation os to ver 5.0.1 I have noticed that the screen will quit rotating.  I can do a hard reset and it will rotate but after a very short period of time it quits rotating again.

    Try restoring the iPod. First from backup and if problem persists, restore to factory defaults/new iPod.
    If you still have the problem then you likely have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • My iPad screen has stopped rotating after upgrading to ios8. I have already tried the screen rotation lock option

    I Upgraded to ios8 yesterday. Since then my screen has stopped rotat

    Hi ismailsurve,
    There are a few things to check if your screen isn't rotating correctly.
    iOS: Screen does not rotate
    Note it says "iPhone or iPod touch", but it applies to the iPad as well.
    Best Regards,
    Nubz

  • IMessage does not work after upgrade to iOS 8.1.3 to my iPad 4

    iMessage does not work after upgrade to iOS 8.1.3 on my iPad 4

    I Fixed it by trying to sign in with a different ID and canceling when it asked For a password and then signed in with my ID and it works! No more error message. I got this idea from another discussion. Thank you for replying though.

  • My home screen does not rotate but all other screens do. Why?

    my home screen does not rotate but all other screens do. why?

    II'm not sure what the problem is, but reset your iPad by holding down on the sleep and home buttons at the same time until the Apple logo appears on the screen. It takes about 10 seconds. See if that fixes it.

  • Auto brightness does not work after upgrade from iOS5 to iOS6 on my iPod touch. Is this intended by Apple, or is it a bug?

    I attempted to ask this question, yesterday. However, I am not used to typing with my thumbs, yet, and messed it up some. So, I will give this another try. Auto brightness does not work after upgrade from iOS 5 to iOS 6 on my iPod touch. Is this intended by Apple, or is it a bug?

    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
    iOS 6 changed how that feature works.

  • HP P1006 DOES NOT PRINT after upgrading to a Macbook Pro 15 i7

    HP P1006 does not work after upgrading to a Macbook Pro 15 i7 2,6 with Mac OS 10.6.3
    I have used Time Machine to migrate from my previous MBP 15 C2D.
    I've tried to remove the printer in system pref. and install it again.
    The installer works fine but close to the end of the installation a new app is starting: HP Laserjet Firmware Update Utility, which won't start and just stays jumping at the dock, although the HP Installer succeeds to finish installing.
    So when i try to print, the printer stays idle.
    I have tried to download the installer from HP official website. Same story.
    Also tried to do Permission Repair in Disk Utility
    Please, if anyone knows a solution, help!

    After the 4th try of Installing the software it finally worked!
    Thanks anyway!

  • IPhone 6 screen does not rotate into landscape

    iPhone 6 (iOS 8.1.2) 4.7 inch screen does not rotate into landscape. I am sure that portrait orientation lock is off. I restart the phone (holding power button and home button together) and it didnt fix. How can i solve this issue? This is annoying.

    onur136 wrote:
    iPhone 6 (iOS 8.1.2) 4.7 inch screen does not rotate into landscape. I am sure that portrait orientation lock is off. I restart the phone (holding power button and home button together) and it didnt fix. How can i solve this issue? This is annoying.
    Check to see if Calculator will rotate into landscape mode.  Not all apps support rotation.

  • When I physically rotate my IPOD touch the screen does not rotate. I must have something set wrong

    When I physically rotate my Ipod touch the screen does not rotate. I must have something set wrong, but can't find out what it is. Can someone point me in the right direction?...thanks

    Is orientation lock on?
    iPod touch User Guide (For iOS 5.0 Software)

  • My ipad screen does not rotate. I tried all things, reseting, even reseting and deleting applications.

    My iPad2 does not rotate. I have already tried all the suggestions. reseting, erase all content and settings. I don't know what to do more. Shall I contact support service and ask them to change my iPad?

    Is there a lock symbol at the top of the screen next to the battery indicator ? If so, then depending on what you've got Settings > General > Use Side Switch To set to (rotation lock or mute notifications), then you can lock/unlock the rotation by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
    If there isn't a lock symbol then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Itunes does no play and music line does not progress after upgrade

    itunes does no play and music line does not progress after i upgraded my itunes to 11 version

    The same thing for me and I've tried EVERYTHING. Someone please help!?!?!

  • Ipad2 screen does not rotate

    The screen on my ipad2 does not rotate when using any of the applications. I have done a reset, reboot and checked the orientation lock - none of these have made any difference.
    I've heard that something can break inside? How can I check if that is the case and therefore get a replacement/refund?
    Thanks

    1. Make sure the Side Switch is set to Lock Rotation: Settings>General
    http://i1224.photobucket.com/albums/ee374/Diavonex/59baf839.jpg
    2. Now check the Side Switch to make sure it's in the unlock position
    http://i1224.photobucket.com/albums/ee374/Diavonex/00bf6eae.jpg

  • 5800 V40 problem. Screen does not off after chargi...

    Hi guys. I updated the firmware to V40 lately, but a serious problem appear. when i plug the phone to charge, the screen does not turn off unless i fiddle with the keylock switch. that's still acceptable, but when charging is complete, the screen turns on to say charging is complete, then refuses to turn off. i left my phone charging when i went to sleep and in the morning, the phone was hot from the screen left on the whole night. i can't possibly sit in front of my phone to wait for it to finish charging then take it out!
    I tried the following: soft reset with 7370, doesn't work. hard reset with green red camera button, problem still there. took out sd card and did another hard reset, still there. reinstalled the firmware, took out sd card, did a hard reset, and it still did not solve the problem. it is basically like a new phone with default settings and no data inside, but nothing seems to work.
    anyone out there have this problem too? it is just so irritating. even turning off the phone to charge does not work, the screen still shines nonstop....... grrrrrr...............

    You cant downgrade. Oftentimes the fix for these kinds of problems (update related) are as follows:
    1. Simple phone reset: Take out the battery for 10 minutes then power up again
    2. Reinstallation of firmware. Using Ovi Suite, reinstall the firmware.
    3. Reset: type in *#7370# and enter security code
    4. Hard Reset: hold the green, red and camera keys until the country selection menu comes up.
    If none of those work, then its time to go to the Care Point. Note that options 2 (may delete), 3, and 4 would delete all data on the phone and thus a back up is necessary.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • Envy x2 auto-rotate does not work, after upgrading to windows 10. And touchpad gestures

    I have installed the latest HP Support Assistant for windows 10  and I have installed the updates  Intel Virtual Button DriverHP System Event Utility Updates failed to install without giving reason: Intel Serial I/O driver Intel Management Engine Interface (MEI) Driver In display settings  I have checked the box of "Allow the screen to auto-rotate"  In Windows Update I have updated with Update for Microsoft Windows (KB3074678)Update for Microsoft Windows (KB3074676)Update for Microsoft Windows (KB3081424)  In Device Manager under Sensors HID Sensor Collection V2, working properlySdo Sensor V2, working properly I have done deleting these devices and reinstalling them  In User Account I have created a new user with password. Auto-rotate did not work in that user    But all these have not worked. Please find a solution for me.   About the TouchPad gesture: swipping inside from the left use to switch app, now does not work.swipping inside from the right use to bring out charm bar/ action centre, now does not work  

    Yes. I found the answer here:http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/HP-Envy-x2-13-j020CA-Windows-10-Auto-Rotate-Autorotate-now/m-p/5212887#M115445I've tried replacing the driver on Sdo Sensor V2 device with the Simple Device Orientation Sensor and rotation works just like it did on 8.1.For the record - Sdo Sensor v2 reports the device orientation continiously, and Simple Device Orientation Sensor reports it only when the orientation changes. Must be a Windows bug then.

  • My ipad 2 does not respond after upgrade to ios 8

    I tried to upgrade my Ipad 2 to ios 8, which has been said to be copatible. During the upgrade process the Apple logo apeared on the black screen and has stayed there everysince. The ipad does not react on a hard reset and is not identified on connecting to a computer, Apple or PC. Screen stays on untill the battery has been emptied. Apple Store in Munich could not help me and told me guarantee has run out, there is nothing they can do, than to offer me a new Ipad 2 for 200 €. I can not understand, that an upgrade can "destroy" my property.

    I had a problem connecting to my exchange server.  It turns out that Exchange will only allow ten devices to be partnered to your account at a time.  Apparently I have a problem with new phone.(Attending the 12 step program now for treatment.) I had this message in my inbox when I logged in to check the server. "You have 10 phone partnerships out of the maximum allowed 10 partnerships. After you reach the maximum, you can't create additional partnerships until you delete existing ones from your account. To do so, sign in to Outlook Web App, click Options > Phone > Mobile Phones, and delete any unused partnerships."  I followed the instructions and delted all the old accounts...problem solved.

Maybe you are looking for

  • Error in creation of Employee for Business Partner

    I am using SRM 4.0 and ECC 5.0. I have created Vendor Root Org EBP and replicated vendors from R/3 which is appearing in Vendor Organization in EBP. Now when I am trying to create Employee as contact person in thru WEB transaction in EBP "Manage Busi

  • How do I re-direct all my songs' location?

    Hi guys, Originally I placed all my songs at my F drive, F:\music. But my laptop encounters some problem few days ago, so I just recovered my C drive. After recovery, the system automatically changed the hard drive names that my F: drive becomes D: d

  • Has anyone successfully used new custom templates with bookings?

    I have been trying to use an alternate list template for bookings as a fallback for the standard list I have which is outputting json. I saw recently in the september release that custom templates are out (thank goodness). I have tried: {module_booki

  • Trying to paste from Illustrator as smart object

    Is there a trick to pasting a pixel-perfect vector image from Illustrator into Photoshop as a smart object, and not introduce a bunch of anti-aliasing that was not in the original file? My images are perfectly aligned with the pixel grid in Illustrat

  • Testing Security policy attached web service

    Hi, I am facing a scenario where I need to test our web service ( which has security policy annotation ) in the similar way how the ( external ) customer would do , i.e with security policy attached. So is there any way to test this scenario..? thoug