Z10 screen not responding after 10.3. update, 28.2.15
The latest OS update by BB has turn my mobile into an unusable piece of equipment.
The touch screen works now only randomly.
After unlocking the screen automatically magifies and all icons disapear. I have to swipe again to reduce screen
size so that I can use my phone.
Is there a fix for this?
If not, how can I download the previous OS which worked perfectly?
Thx,
S
I have same problem, rollback OS to the earlier version.... https://developer.blackberry.com/blackberry10devalphas/allautoloaders.html
Similar Messages
-
Z10 Touch screen not responding after OS update 10.3.1
Which subversion?
1. Done hard reset2. Done reset & update from blackberry link also Yet screen is not responding.Kindly help or advice how can i get update the earlier version of OS and how to do so
-
Photoshop CC not responding after getting lattest update
After getting the lattest update from creative cloud photoshop CC is not responding properly and it's taking lots of time in completing each activity.
Yasho Bhushan,
Please try to follow the steps mentioned in the Solution2:
http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html
Regards
Gurleen -
My Iphone5 is hanging and not responding after trying to update
I tried to update my IPhone 5 to the latest version of ITunes, but it didn't complete the update neither operate as normal it is now dead! My IPhone is16 MB, My laptop is 13 TB and 4 GB processor speed
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Touch screen not responding after water damage
Hello community.
I do get the fact that there is million of threads, but I want to know the opinion of others on this particular case.
I dropped my phone into the toilet (luckily, it was clear) and immediately got it out.
As I had no experience with these kind of accidents, I actually didn't turn off the phone. I used a towel and then I wobbled my phone to get rid of the water. Then, as the phone started rebooting itself, I dried it with a hairdryer (yes, I'm an idiot) and used a vacuum cleaner to help the proccess.
It kept saying this error [NAND] FileFlashAndMedia or something like that, so I turned it off for good and tried to restore it - I started getting the -1 error.
After several repetitions, iTunes finally started restoring my iPhone 5 and everything was back to normal. But then I came to the dreadful realization that the screen does not respond. Everything is ok - all the buttons, the display, even the sound seeems to be fine.
So after these 15 minutes of panicking I started to read articles and watch videos of other people. Put the phone in a bowl of rice, sealed it and I turn it on from times to times to find out if the screen started responding.
Any suggestions? Do you think there is a possibility to recover it?mheijjer wrote:
This just happened to me!! Did it work? desperate to know if my phone will be salvageable!!
Your question has been answered in your other thread. No need to bump threads that are over a year and a half old. Odds are the OP is not monitoring this thread. -
Loginwindow (Not Responding) after iTunes & Quicktime update
In order to activate my new iPhone this morning I needed to upgrade to iTunes 7.5 and the corresponding Quicktime update. After a reboot and logging in I was presented with the desktop, the dock and a spinning beachball . . . which still hadn't gone away after 10 minutes.
After a while I tried a few things and noticed that the dock was working, until I ctrl clicked on the finder icon that is. After that the dock froze and I rebooted with a long power button press. After logging again I had the same problem, desktop, working dock and spinning beachball.
This time I hit one of my dock stacks and launched the Activity Monitor, only to discover that a process called 'loginwindow' was Not Responding. On force quitting this everything went away and I was back to the login prompt. I logged in again and found the same thing - I can use all the applications I can get to through the dock but have no finder . . .
Any ideas?? HELP!!OK, here's /var/log/system.log from boot. Are the following two lines significant??
Nov 10 21:40:43 Macintosh com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[119]): Exited: Terminated
Nov 10 21:40:43 Macintosh com.apple.launchctl.Aqua[131]: launchctl: Couldn't stat("/etc/machinit_peruser.d"): No such file or directory
Nov 10 21:39:57 localhost kernel[0]: Darwin Kernel Version 9.0.0: Tue Oct 9 21:37:58 PDT 2007; root:xnu-1228~1/RELEASE_PPC
Nov 10 21:39:47 localhost com.apple.launchctl.System[2]: /dev/disk0s3 on / (hfs, local, journaled)
Nov 10 21:39:49 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
Nov 10 21:39:49 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
Nov 10 21:39:49 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
Nov 10 21:39:54 localhost fseventsd[31]: event logs in /.fseventsd out of sync with volume. destroying old logs. (19369 21 20061)
Nov 10 21:39:58 localhost kernel[0]: standard timeslicing quantum is 10000 us
Nov 10 21:39:54 localhost fseventsd[31]: log dir: /.fseventsd getting new uuid: C00E1A09-A514-48BA-A79D-C46786E0EE9E
Nov 10 21:39:58 localhost kernel[0]: vmpagebootstrap: 380993 free pages and 12223 wired pages
Nov 10 21:39:58 localhost kernel[0]: migtable_maxdispl = 79
Nov 10 21:39:58 localhost kernel[0]: 105 prelinked modules
Nov 10 21:39:58 localhost kernel[0]: Loading security extension com.apple.security.TMSafetyNet
Nov 10 21:39:58 localhost kernel[0]: calling mpopolicyinit for TMSafetyNet
Nov 10 21:39:58 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Nov 10 21:39:58 localhost kernel[0]: Loading security extension com.apple.nke.applicationfirewall
Nov 10 21:39:58 localhost kernel[0]: Loading security extension com.apple.security.seatbelt
Nov 10 21:39:58 localhost kernel[0]: calling mpopolicyinit for mb
Nov 10 21:39:58 localhost kernel[0]: Seatbelt MACF policy initialized
Nov 10 21:39:58 localhost kernel[0]: Security policy loaded: Seatbelt Policy (mb)
Nov 10 21:39:58 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Nov 10 21:39:58 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Nov 10 21:39:58 localhost kernel[0]: MAC Framework successfully initialized
Nov 10 21:39:58 localhost kernel[0]: using 7864 buffer headers and 4096 cluster IO buffer headers
Nov 10 21:39:58 localhost kernel[0]: IOPCCard info: Intel PCIC probe: TI 1510 rev 00
Nov 10 21:39:58 localhost kernel[0]: FireWire (OHCI) Apple ID 31 built-in now active, GUID 001124fffe75e670; max speed s800.
Nov 10 21:39:58 localhost kernel[0]: mbinit: done
Nov 10 21:39:58 localhost kernel[0]: Security auditing service present
Nov 10 21:39:58 localhost kernel[0]: BSM auditing present
Nov 10 21:39:58 localhost kernel[0]: rooting via boot-uuid from /chosen: BAD0DFF0-4023-381B-8C51-E904679A62CC
Nov 10 21:39:58 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Nov 10 21:39:58 localhost kernel[0]: Got boot device = IOService:/MacRISC2PE/pci@f4000000/AppleMacRiscPCI/ata-6@D/AppleKauaiATA/ATADev iceNub@0/AppleATADiskDriver/IOATABlockStorageDevice/IOBlockStorageDriver/ST91008 23A ST9100823A/IOApplePartitionScheme/Untitled@3
Nov 10 21:39:58 localhost kernel[0]: BSD root: disk0s3, major 14, minor 2
Nov 10 21:39:58 localhost kernel[0]: jnl: unknown-dev: replay_journal: from: 6728192 to: 4701696 (joffset 0x8601000)
Nov 10 21:39:58 localhost kernel[0]: CSRHIDTransitionDriver::start []
Nov 10 21:39:58 localhost kernel[0]: CSRHIDTransitionDriver::switchToHCIMode legacy
Nov 10 21:39:58 localhost kernel[0]: USBF: 22.539 CSRHIDTransitionDriver[0x2a10f00](IOUSBCompositeDevice) GetFullConfigDescriptor(0) returned NULL
Nov 10 21:39:58 localhost kernel[0]: CSRHIDTransitionDriver... done
Nov 10 21:39:58 localhost kernel[0]: E:[AppleUSBBluetoothHCIController][FindInterfaces] mInt0InterruptMaxPacketSize = 16
Nov 10 21:39:58 localhost kernel[0]: jnl: unknown-dev: journal replay done.
Nov 10 21:39:58 localhost kernel[0]: HFS: Removed 5 orphaned unlinked files or directories
Nov 10 21:39:58 localhost kernel[0]: Jettisoning kernel linker.
Nov 10 21:39:58 localhost rpc.statd[22]: statd.notify - no notifications needed
Nov 10 21:39:59 localhost bootlog[39]: BOOT_TIME: 1194730773 0
Nov 10 21:40:00 localhost kernel[0]: Resetting IOCatalogue.
Nov 10 21:40:00 localhost kextd[12]: 0 cached, 423 uncached personalities to catalog
Nov 10 21:40:08 localhost DirectoryService[35]: Launched version 5.0 (v514)
Nov 10 21:40:08 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[27]: Login Window Application Started
Nov 10 21:40:08 localhost DirectoryService[35]: WARNING - dsTouch: file was asked to be opened </Library/Preferences/DirectoryService/.DSIsRunning>: (File exists)
Nov 10 21:40:09 localhost kernel[0]: UniNEnet: Ethernet address 00:11:24:75:e6:70
Nov 10 21:40:09 localhost blued[50]: Apple Bluetooth daemon started.
Nov 10 21:40:11 localhost /usr/sbin/ocspd[55]: starting
Nov 10 21:40:11 localhost ifcstart[29]: 3891612: (CGSLookupServerRootPort) Untrusted apps are not allowed to connect to or launch Window Server before login.
Nov 10 21:40:11 localhost com.apple.IFCStart[29]: Sat Nov 10 21:40:11 localhost ifcstart[29] <Warning>: 3891612: (CGSLookupServerRootPort) Untrusted apps are not allowed to connect to or launch Window Server before login.
Nov 10 21:40:11 localhost ifcstart[29]: kCGErrorRangeCheck : On-demand launch of the Window Server is allowed for root user only.
Nov 10 21:40:11 localhost com.apple.IFCStart[29]: Sat Nov 10 21:40:11 localhost ifcstart[29] <Error>: kCGErrorRangeCheck : On-demand launch of the Window Server is allowed for root user only.
Nov 10 21:40:11 localhost ifcstart[29]: kCGErrorRangeCheck : Set a breakpoint at CGErrorBreakpoint() to catch errors as they are returned
Nov 10 21:40:11 localhost com.apple.IFCStart[29]: Sat Nov 10 21:40:11 localhost ifcstart[29] <Error>: kCGErrorRangeCheck : Set a breakpoint at CGErrorBreakpoint() to catch errors as they are returned
Nov 10 21:40:11 localhost /usr/libexec/ifcstart[29]: _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL.
Nov 10 21:40:11 localhost com.apple.IFCStart[29]: _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL.
Nov 10 21:40:12 localhost mDNSResponder mDNSResponder-161.1 (Oct 11 2007 00:22:27)[26]: starting
Nov 10 21:40:13 localhost mDNSResponder[26]: Adding registration domain jodrell.members.mac.com.
Nov 10 21:40:20 localhost kernel[0]: Matching service count = 0
Nov 10 21:40:21: --- last message repeated 5 times ---
Nov 10 21:40:21 localhost kernel[0]: wl0: Broadcom BCM4320 802.11 Wireless Controller
Nov 10 21:40:21 localhost kernel[0]: 4.170.25.8.2
Nov 10 21:40:21 localhost kernel[0]: AirPort_Brcm43xx: Ethernet address 00:11:24:8e:52:78
Nov 10 21:40:21 Macintosh configd[37]: setting hostname to "Macintosh.local"
Nov 10 21:40:22 Macintosh configd[37]: ipconfigd: method requires address and mask
Nov 10 21:40:26 Macintosh kernel[0]: SetCryptoKey T: len 16, idx 0
Nov 10 21:40:26 Macintosh configd[37]: AppleTalk startup
Nov 10 21:40:26 Macintosh kernel[0]: SetCryptoKey R: len 16, idx 1
Nov 10 21:40:27 Macintosh SystemStarter[19]: "/System/Library/StartupItems/NMPCCardOption3gDaemonVF" failed security check: world writable
Nov 10 21:40:27 Macintosh SystemStarter[19]: "/System/Library/StartupItems/NMPCCardOption3gDaemonVF" failed security check: group writable
Nov 10 21:40:27 Macintosh SystemStarter[19]: "/System/Library/StartupItems/NMPCCardOption3gDaemonVF" failed security check: not owned by UID 0
Nov 10 21:40:27 Macintosh com.apple.SystemStarter[19]: Starting MySQL database server
Nov 10 21:40:27 Macintosh com.apple.SystemStarter[19]: Starting Cisco Systems VPN Driver
Nov 10 21:40:27 Macintosh com.apple.SystemStarter[19]: Tuning TCP/IP stack for 2.5G/3G performance
Nov 10 21:40:27 Macintosh com.apple.SystemStarter[19]: kern.ipc.maxsockbuf: 8388608 -> 1048576
Nov 10 21:40:27 Macintosh com.apple.SystemStarter[19]: Starting NMPCCardDaemonVMC
Nov 10 21:40:27 Macintosh com.apple.SystemStarter[19]: Starting NMPPPMonitor
Nov 10 21:40:27 Macintosh com.apple.SystemStarter[19]: net.inet.tcp.slowlink_wsize: 8192 -> 65535
Nov 10 21:40:27 Macintosh com.apple.launchd[1] (0x10c1b0.nohup[102]): Could not setup Mach task special port 9: (os/kern) no access
Nov 10 21:40:27 Macintosh /System/Library/StartupItems/NMPCCardDaemonVMC/NMPCCardDemonVMC[89]: Version 2.1.6 will start in 30 seconds.
Nov 10 21:40:27 Macintosh com.apple.launchd[1] (0x10c1b0.nohup[104]): Could not setup Mach task special port 9: (os/kern) no access
Nov 10 21:40:27 Macintosh com.apple.launchd[1] (0x10c1b0.nohup[112]): Could not setup Mach task special port 9: (os/kern) no access
Nov 10 21:40:28 Macintosh com.apple.SystemStarter[19]: kextload: extension /System/Library/Extensions/CiscoVPN.kext is already loaded
Nov 10 21:40:28 Macintosh kernel[0]: CiscoVPN : attempting to attach to all available ethernet interfaces.
Nov 10 21:40:28 Macintosh kernel[0]: CiscoVPN : interface: en1, filter attached.
Nov 10 21:40:28 Macintosh kernel[0]: CiscoVPN : en1
Nov 10 21:40:28 Macintosh kernel[0]: CiscoVPN : current MTU for en1 is 1500, saving it.
Nov 10 21:40:28 Macintosh kernel[0]: CiscoVPN : interface: en0, filter attached.
Nov 10 21:40:28 Macintosh kernel[0]: CiscoVPN : en0
Nov 10 21:40:28 Macintosh kernel[0]: CiscoVPN : current MTU for en0 is 1500, saving it.
Nov 10 21:40:28 Macintosh kernel[0]: CiscoVPN : loading cisco ipsec kernel module.
Nov 10 21:40:32 Macintosh configd[37]: AppleTalk startup complete
Nov 10 21:40:33 Macintosh loginwindow[27]: Login Window Started Security Agent
Nov 10 21:40:36 Macintosh kextd[12]: writing kernel link data to /var/run/mach.sym
Nov 10 21:40:42 Macintosh authorizationhost[124]: MechanismInvoke 0x130e00 retainCount 2
Nov 10 21:40:42 Macintosh SecurityAgent[125]: MechanismInvoke 0x103e40 retainCount 1
Nov 10 21:40:42 Macintosh SecurityAgent[125]: NSSecureTextFieldCell detected a field editor ((null)) that is not a NSTextView subclass designed to work with the cell. Ignoring...
Nov 10 21:40:43 Macintosh SecurityAgent[125]: MechanismDestroy 0x103e40 retainCount 1
Nov 10 21:40:43 Macintosh loginwindow[27]: Login Window - Returned from Security Agent
Nov 10 21:40:43 Macintosh authorizationhost[124]: MechanismDestroy 0x130e00 retainCount 2
Nov 10 21:40:43 Macintosh loginwindow[27]: USER_PROCESS: 27 console
Nov 10 21:40:43 Macintosh com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[119]): Exited: Terminated
Nov 10 21:40:43 Macintosh com.apple.launchctl.Aqua[131]: launchctl: Couldn't stat("/etc/machinit_peruser.d"): No such file or directory
Nov 10 21:40:58 Macintosh /System/Library/StartupItems/NMPCCardDaemonVMC/NMPCCardDemonVMC[89]: Starts...
Nov 10 21:40:58 Macintosh /System/Library/StartupItems/NMPCCardDaemonVMC/NMPCCardDemonVMC[89]: Looking for supported device 'VMC3G pccard'...
Nov 10 21:40:58 Macintosh /System/Library/StartupItems/NMPCCardDaemonVMC/NMPCCardDemonVMC[89]: Looking for supported device 'Fusion Lite Quad pccard'...
Nov 10 21:40:58 Macintosh Dock[139]: _DESCRegisterDockExtraClient failed 268435459
Nov 10 21:40:58 Macintosh /System/Library/StartupItems/NMPCCardDaemonVMC/NMPCCardDemonVMC[89]: Looking for supported device 'Novatel Merlin U740 pccard'...
Nov 10 21:41:00: --- last message repeated 1 time ---
Nov 10 21:40:58 Macintosh /System/Library/StartupItems/NMPCCardDaemonVMC/NMPCCardDemonVMC[89]: Looking for supported device 'Huawei DATA PCCard'...
Nov 10 21:41:10 Macintosh Dock[139]: [QL ERROR] Generator database update takes too long... we will use what we currently have
Nov 10 21:41:58 Macintosh mdworker[147]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
Nov 10 21:42:00 Macintosh mdworker[149]: CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary. -
HP Utility 'Application Not Responding' after downloading Apple update
Trying to setup a brand new HP Officejet Premium 6700 with a brand new Air (OSX Mavericks v10.9.3). Was having issues with the supplied printer software and the wireless print capability so uninstalled that and added the software via an Apple Software Update. I can now print wirelessly however every time I try to open the HP Utility (via Printers & Scanners) I receive a message of 'Application Not Responding'.
Have subsequently tried to access HP Utility via the printer USB and am having the same issue.
I can't get the scanner to connect to the computer without the Utility. Any suggestions? I have literally uninstalled and reinstalled every variation of software for HP Officejet 6700 that I can find. Getting very frustrated.
Notably I did have the computer connected to the scanner via wireless but lost the ability when I ran the OSX upgrade to 10.9.3. The printer still references the computer when I click on Scanner/ Computer on the printer itself, but when I try to select the computer it says the computer isn't available.
Hoping someone has a good suggestion!I think there's a good possibility there are "mis-matched" driver files.
I would:
delete the HP folder from Library/Printers (you may have to use Go menu > go to folder to see it).
Get/install the latest HP driver (hopefully includes utility) from:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=5058338&cc=us&dlc=en &lc=en
Reset the Printing System.
http://support.apple.com/kb/PH14141
Re-Add the printer in Print & Scan prefs. -
Touch screen not responding after iOS 7.0.2 update
This morning I updated my iPhone 4s with the iOS 7.0.2. After the update I was prompted with the "Hello > slide to set up" screen, but when I tried to "slide it" nothing happened. I tried many times with my finger and a stylus, but still nothing. The screen eventually went black as it does when there is no activity. When I press the home button the "slide to set up" screen reappears. I tried holding the power button down, but couldn't "slide to power off". I restarted it by pressing the hold and home buttons at the same time, after the restart it went back to the "slide to set up" screen. The touch screen was working just fine up until the update. Please help me figure out what's wrong with my phone!
I'm sorry to hear about the issues that you've recently ran into with your device. I'll do everything I can to ensure you have a working device.
Do you have iTunes on your computer? Have you done a restore since the issue has been going on? http://support.apple.com/kb/HT1414
YosefT_VZW
Follow us on Twitter @VZWSupport -
Touch Screen Not Responding after windows updates - Satellite U845t
From one day to the other, the touch screen of my Satellite U845t is completely unresponsive... anyone knows how to fix this? (I have restored the system to a point when I knew the touch screen was responsive, but no luck). Please some help!
Thanks!Which update, Windows 8 to 8.1 or others?? more information and full model and or part number
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!**** -
TS1398 Wifi not responding after the software update. restored the system but still no luck.
After I updated the software, the wi-fi has stopped working. I have already restored the system but the problem remains. Wifi is working fine otherwise.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon
You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost. -
help.... i've faced this problem since the windows phone 8.1 updates.... sometimes my screen freeze after unlock my phone . sometimes after open an app the touch screen not respond to my touch... i tried all the ways like turning off wifi etc and still
no recover my problem , and still screen freezing problems appear on windows phone 10 technical support..... just wish had to cure it... or i was depressing ....Hello,
This is a developer forum and is intended only for discussions of Windows Phone APIs and app development.
For technical issues regarding usability, updates, or other Windows Phone usability problems you might want to try the Microsoft Mobile Community forums:
http://answers.microsoft.com/en-us/winphone/forum?tab=Threads
Thanks,
James
Windows SDK Technologies - Microsoft Developer Services - http://blogs.msdn.com/mediasdkstuff/ -
My ipad mini ios 6.1.3 touch screen not responding
after just a week of minor usage my brand new ipad mini touch sensor stopped working have updated it, resetted it, and restored it , it worked after the first restore then went back to the same condition restored it again and again but nothing what am i supposed to do with it now
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
Cheers, Tom -
Since I updated my adobe flash player firefox keeps saying that it is not responding after I open it and it loads my home page, I disabled add-ons and went throught the process of figuring out which one it was and it was adobe flash, but without flash I cant access a lot of different sites, how can I fix this. I have tried uninstalling and reinstalling both firefox and adobe flash, but neither works!
See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]] -
Screen not responding correctly.
Has anyone else had issues with their screen not responding correctly.Mine is typing wrong charaters or none at all. I've updated to the latest ios. restored, reset and everything else I can think of. The phone is less than 6 months old.
Did you restore as new without the backup? If you restored as new and then restored the backup, there is a chance that something in the backup could be causing it. But frankly, that seems unlikely to me, but the only way that you could know for sure is to try restoring as new without the backup.
if you did restore as new, there isn't much else that you can do on your own. Take it to an Apple Store and let them have a look at it. It could be hardware related and there isn't anything that you will be able to do about it unless you want to have the device repaired on your own, since Apple does not repair iPads. They replace out of warranty iPads with refurbs for a cost starting at $250.00 in the U.S.
Maybe you are looking for
-
Please find code below. When I run this report with transaction it gives variant error .How can I fix this problem REPORT yiwm_uom_stock . *---Data Include INCLUDE yiwm_uom_stock_data. *INITIALIZATION. PERFORM initialize_varia
-
Hi All I have a oracle database version--10.1.0.5.0 on Windows platform. I have scheduled Export and RMAN for every day. Now i want to get email notification on the above job completion. Can anyone have the script which he can share with me for this.
-
CS5 will not remember print settings
Have upgraded from cs3 and cannot get cs5 to remember my print settings. In cs3 when I open a file to print it, the print driver automatically uses all the settings specified the last time I printed and saved the file. In cs5 the driver uses the sett
-
This is more of a bug report rather than a question:
i have 2 ipods and an iPhone all running ios 6.1.3 and occasionally at random times the screens brightness turns all the way down, this hasnt happend before the update. the only way i know of to fix it is to restart my device. please fix this in ne
-
Hi, For some reason duplex printing to a Xerox Apeosport C5540 has just started printing the second page upside down. Changing the binding selection (long side or short side) has no affect. Anyone have similar experience ? I recently installed an HP