Z10: SD-card erased 12h after update (?)

Yesterday I updated my Z10 to version 10.1.0.4181. After this update I have lost all my text messages. But today I've made a trip from Belgium to France by high speed train as I did several times in the past. Today after two houres of listening to music stored on the SD card (16Gb), my Z10 did something strange. The volume went up to the highest level and it was like in scan mode: 20 sec of a song and then the next... Also was it blocked. After off/on there was no more music on the SD-card; Also all the images were gone... after removing the SD I could see some files trough wondows explorer on my laptop.The SD was used for 14 Gb while the explorer couldn't find a file: all was empty. (downloads, camera, music,...) I formatted the card and put again the music on it and it works again. Lucky I take every two days a backup so I did not lose anything. What did I wrong? What can I do to prevent this? or is it caused by the update? Thank you for your help!!
If it ain't broken, you don't need to fix it!

Hey vl2431,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
It is hard to tell what has happened to the SD card, after you restored the media files back on the SD card did the issue happen again? I would suggest monitoring the issue and let me know if any strange behavior happens again.
I look forward to your reply.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Similar Messages

SIM card not valid after update

I updated to the iOS5, then I hooked up my NON-jailbroken 3GS. After "updating" everything this message appears:
The SIM card inserted in this iPhone does not appear to be supported.
I took my phone to my carrier, AT&T, and they cleaned the SIM card, didnt work. They replaced the SIM card, it didn't work. Tried to restore my phone, didn't work.
Any advice?

Just to make sure it wasn't a PC/Mac issue I have tried the following on each of 2 different windows PC's and a Mac & a MacBook Pro:
New installation/download of the Software update for iPhone 4, and each time putting the phone into recovery mode. I have also been using a new micro sim from O2 - obtained first thing this morning.
You do the maths on how much time this has taken, and guess what it still doesn't work....!
This has to be the most direct way of getting someone to upgrade to a new phone - the day before a new iPhone comes out - coincidence.......hmmm.
Just as a point of interest the iPhone was replaced in May this year, so is relatively new.
I do find it had to believe that there is no word from Apple as to the reason &/or a resolution.
COME ON

BB z10 won't start up after updating to bb link

I accidentally dropped my phone on the floor, and it won't start up.
here are the following steps that i already did:
1. I already tried to update it on the bb link, after successfully updating i remove the usb cable, however it didn't start up. everytime i try to do a hard reset it automatically turns off, even when im seeing the blackberry logo on the screen. it goes off again.
2. i tried also to charge it first and then the blackberry name appears on the screen it will also automatically turns off and after that it will charge only and then again the blackberry name appears on the screen same thing happen again.
3. I tried to uninstall the bb link to my computer and install again the bb link then update it again, after the successful update. still no changes happen
4. I also tried to update the bb z10 os, in a hard way through internet explorer, nothing change still won't start up.
There's one thing that i've noticed everytime I plug the usb cable on my phone, through the computer and access the bb link, it will connect and then it will disconnect it goes on and on, as i seen on the screen. I updated the usb cable plugging in,thinking that can fix the problem but still nothing change.
I know that my bb z10 works fine up to now, because there is an instant that the bb logo appears on the screen completed loading and i can navigate it for a while like changing the language and connecting to a wifi, and the logo of my sim card appears on the screen, however it will take few seconds only, and then it will turn again to the same situation that occurs on my phone.
Please help me find a good solution regarding on my phone problem.

Since this occurred right after dropping your device it's probably damaged internally. Not much we can do here for that.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Iphone 3gs "no sim card installed" issue after updating iOS

I have an iPhone 3Gs. Last week I started updating the iOS of the phone then, I was brought to the page wherein I need to activate the phone. After going through some tabs to tap, the screen says " iphone cannot be activated because the activation server is temporarily unavailable, try to connect to iTunes. So I followed what is instructed. I connected the phone to iTunes but the message says, There is no sim card installed on your iphone. Before I updated the phone, the sim card was not inside the phone, so I inserted it back after the message "no sim card installed, try to disconnect and insert your sim card". But still nothing happened, the message keeps appearing. Also, I can see a "No service" message on the upper Ieft part of the phone. Is the sim card not inside the phone before updating the iOS the main reason why the phone cannot recognize the sim card? first time iphone user here, my aunt gave me this iphone. I really need help. Thank you so much

Ask your aun if the phone was hacked/jailbroken. Those problems are symtomatic of a hacked phone.

[SOLVED] DVB-C card stopped working (after update?)

edit: Marked as solved because the problem hasn't occurred for years.
I have a TechnoTrend TT-Budget C-1501 PCI DVB-C card which used to work fine. Today I installed a bunch of updates including new kernel and now the card doesn't work. Current kernel version is 3.9.2-1-ARCH, as reported by uname -r. I don't remember the kernel version which was installed when the card worked but I installed Arch about a month ago and this was the first upgrade.
dmesg gives the following information:
$ dmesg | grep -i dvb
[ 1.663037] saa7146: register extension 'budget_ci dvb'
[ 1.663232] DVB: registering new adapter (TT-Budget C-1501 PCI)
[ 1.718876] input: Budget-CI dvb ir receiver saa7146 (0) as /devices/pci0000:00/0000:00:1c.4/0000:03:00.0/0000:04:01.0/rc/rc0/input13
[ 1.719068] rc0: Budget-CI dvb ir receiver saa7146 (0) as /devices/pci0000:00/0000:00:1c.4/0000:03:00.0/0000:04:01.0/rc/rc0
[ 1.721746] DVB: TDA10023(-1): tda10023_writereg, writereg error (reg == 0x00, val == 0x33, ret == -121)
[ 1.771639] DVB: TDA10023(-1): tda10023_readreg: readreg error (reg == 0x1a, ret == -121)
This problem seems to be relatively common with cards containing the TDA10023 chip but I haven't found a proper solution. Is this just a bug or should I adjust something?
EDIT: I forgot to mention that the card works on Windows.
Hardware specs:
Intel Xeon E3-1230v2 CPU
16GB of RAM
ASRock H77 Pro4/MVP motherboard (BIOS/UEFI version seems to be the latest (1.50))
Geforce GTX 650 Ti
Last edited by ormu (2015-04-07 16:01:12)

Weird, now it's working again after "cold" boot... Could the Windows driver load a different firmware which doesn't work properly on Linux? I think I used the card on Windows just before rebooting to Arch...
$ dmesg | grep -i dvb
[ 1.651217] saa7146: register extension 'budget_ci dvb'
[ 1.651361] DVB: registering new adapter (TT-Budget C-1501 PCI)
[ 1.708299] input: Budget-CI dvb ir receiver saa7146 (0) as /devices/pci0000:00/0000:00:1c.4/0000:03:00.0/0000:04:01.0/rc/rc0/input13
[ 1.708338] rc0: Budget-CI dvb ir receiver saa7146 (0) as /devices/pci0000:00/0000:00:1c.4/0000:03:00.0/0000:04:01.0/rc/rc0
[ 1.711359] budget_ci dvb 0000:04:01.0: DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)...

Itunes erased everything after updating to 10.7 on pc!?

I tried updating the itunes software to 10.7, but then it wouldnt open so i changed the itunes file name to itunes.old and it opened but everything is erased! help!

smiles365 wrote:
I tried updating the itunes software to 10.7, but then it wouldnt open so i changed the itunes file name to itunes.old and it opened but everything is erased! help!
This is the way you should have tried...
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Razr HD SD card not mounting after update to JB 4.1.2

My Razr HD which i just got in March no longer recognizes the SD card installed. I have tried removing and reinserting and when the phone boots it sees the disk for all of about 2 minutes then it gives error stating that the card was removed or unmounted. Even though it wasn't. I didnt have a problem with it until the 4.1.2 Update was pushed to my phone. Anyone else having the same issue and is there a fix out there?

Lets get your device to recognize your SD card Stephen-H! Try the steps below and test out.
1) Insert the SIM removal tool into the hole to unlock the SIM card tray, then slide the SIM card tray out of the device.
2) Insert the microSD memory card into the left card slot with the gold contacts facing down. Gently push until it clicks.
Tip: Use the SIM Tray removal tool to push the SD Card all the way into the slot, and to eject the SD Card when you need to remove it.
Note: If your SD Card doesn't click in, position the Card Insertion/Removal Tool on the edge of the card, and gently push until it clicks.
Please keep us posted if the issue persists.
Thank you,
LenaA_VZW
Follow us on Twitter @VZWSupport

Sim card not valid after update to ios 5

just updated to iOs 5 on an AT&T iphone 4....says sim card not valid

Just to make sure it wasn't a PC/Mac issue I have tried the following on each of 2 different windows PC's and a Mac & a MacBook Pro:
New installation/download of the Software update for iPhone 4, and each time putting the phone into recovery mode. I have also been using a new micro sim from O2 - obtained first thing this morning.
You do the maths on how much time this has taken, and guess what it still doesn't work....!
This has to be the most direct way of getting someone to upgrade to a new phone - the day before a new iPhone comes out - coincidence.......hmmm.
Just as a point of interest the iPhone was replaced in May this year, so is relatively new.
I do find it had to believe that there is no word from Apple as to the reason &/or a resolution.
COME ON

Sim card not supported after updating software on iphone

so i was downloading the new software and it appeared to be working and it all of a sudden said "the sim card inserted in this iphone does not appear to be supported" ..it has the same telus sim card in it that it did before which is the one that came with it from telus ..any one know how to fix this or what it is all about? my phone wont work at all now and the only option on itunes for my iphone is eject..

I'm having same problem here. I can't live without my iphone,even my alarm is in my phone(kinda afraid that i can't wake up tomorrow). My phone is no longer in guarantee,so I don't think I can bring it to apple store.So,anyone please help me,I really need my phone

Z10 - 10.2.1 to 10.3.1: One year of camera pictures missing after updating

Hello,
After updating a Z10 from 10.2.1 to 10.3.1, I have one device (out of 5) with one year of pictures that are unaccounted for (April 2014 to before the update). The Z10 has a SD card but pictures were always saved on the Device storage. The BlackBerry Link full backup file size dropped from 7.64GB to 4,44GB after updating the device, so the pictures are clearly not there anymore.
I always backup devices before updating, so I was able to recover the missing pictures, but this is not acceptable behavior ... Seems to me to be a very serious bug.
Very similar to this post:
Missing camera pictures and saved picture files following OS update from 10.2 to 10.3
https://supportforums.blackberry.com/t5/forums/replypage/board-id/Z10/message-id/74141

Confirmed that the same bad behavior is there now that the calendar has rolled forward to May.
Like I said this raises the question of what else is broken in the basic functionality of an essential app.
BlackBerry folks reading this - hope to you see you reproduce the bug, and acknowledge ingestion of a bug report into your internal bug tracking system, for priority fix on next OS release.
Others reading this, if you reproduce the bug (should be easy) - please add comments as you see fit, to get BlackBerry's attention on this one.

Many contacts are not visible to alphabetical browse on Contacts after update to OS 10.2 on the Z10

After updating to 10.2 on Z10 many contacts do not appear on the Contacts list, but if I search for them, I get them one at a time. I can't browse for them, but they are still in a file somewhere. That file is no longer fully connected to the Contacts app, it seems. I'm going to call the two alternatives the "browsible" list when I refer to the Contact app working correctly and lsiting the contact alphabetically; and the "non-browsible" list, when I can only find them by a search.
One other thing of interest. When I add a contact that is in the same name as one on the non-browsible, I will get a message asking me if I want to replace the [old] contact. If I say yes, the new contact listing joins the hidden list and replaces what was there. If I say no, I get the contact added to the browsible Contact app. Thereafter, if I search on that name I get two hits: one is the old, non-browsible entry and the other is the new one that is browsible.
I did the 10.2 update when I was running the older BB link on a WinXP computer and it did not work to create a back-up, so I can't try restore. I now run Win7 64-bit and the new link seems to work okay, but that was installed after I upgraded to 10.2..
Any suggestions as to where I go to find the hidden contact entries on the non-browsible list? And how I get them to appear on the alphabetical, browsible, list when Contacts is opened?
Thanks for all answers.
Ken

That's another odd thing. I did make a big effort to back-up the Z10 before the update to OS 10.2.1. But, it appears to me that by downloading the new OS to my computer [T-Mobile never does push the BB updates, not as long as I've owned it, which was a few days before the US distro, when I got hold of one for the South American market in Miami Breach] it seems to have removed my installed BB Link from my laptop. And my back-up files are empty.
Last time something like this happened. there was a workaround. Do this, do that, and suddently the contacts that are lurking somewhere on the phone, appear. I was hoping for this again.
If this is a known issue, why is it not featured on the BB page where the installer was located? I would never have downloaded OS 10.2.1, if I was warned I might lose my contacts and texts.
A sorry mess.
Ken
PS Note I corrected "visible" to "invisible" in the title of this thread

My iphone 3GS after updating from 5.1 to 6.3 it shows incert SIM card and impossible to identify, My iphone 3GS after updating from 5.1 to 6.3 it shows incert SIM card and impossible to identify

after updating my iphone from 5.1.1 to 6.3 it shows insert SIM card and impossible to indentify

Remove and reinsert the SIM.

TS2634 My friends sd card reader no longer shows the pictures after updating to ios 7, is there a fix?

My friend has an ipad, and after updating to ios 7.0.2 the sd card reader that came with it no longer shows the pictures... just squares where the pictures would be. Is there a way to fix this?

@ Settings>iCloud
1. Icloud account being used
2. I see the following switches
>mail
>contacts
>reminders
>safari
>notes
>keychain (not a toggle switch)
>photos (not a toggle switch)
>find my iPhone
3. Storage & Backup
delete account option

Hp pavillion 500-185el graphic card problems after update to windows 8.1

hallo
after i done the Windows 8.1 update my graphic card is giving me some problem.
occasionally my desktop become black for 1-2 seconds and the background disappears.
I've update all drivers.
the problems started after the update to Windows 8.1
graphic card: AMD Radeon HD 8570
driver version: 13.150.102.0
thanks for support

Hey @jdudleyjones ,
Welcome to the HP Forums!
I understand the card reader for your notebook is no longer working after updating to Windows 8.1.
You're probably right that it's a driver issue, however just like you I don't know which card reader you're using either.
Can you please tell me which notebook you have? For information on finding your product and model numbers click here: How Do I Find My Model Number or Product Number?
It would also help if you could tell me the Hardware ID for the card reader. Here's how you find it:
Press Windows Key + X
Click Device Manager
Click View at the top and select Show hidden devices.
You will most likely find the card reader listed under Other devices as an Unknown device.
Right click on it and select Properties.
Select the Details tab.
Change the drop down menu to Hardware Ids.
Note down the first ID in the list (as you'll see they're all pretty much the same regarding the Ven_ and Dev_ numbers which is all I need).
Once you've provided this info I should be able to find the drivers for you.
Look forward to hearing back from you!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

After updating to iOS 5, my Iphone 4 is not reading my SIM Card. I went to ATT and got a brand new SIM Card, and it still hasn't worked. Can you help??

After updating my iphone 4 to iOS 5, it refused to read my att SIM Card. I went to the Apple store (Lennox Mall, Atlanta Georgia) for help, they told me that it was an Att problem, and needed me to get a brand new Sim Card from Att. I went to Att and replaced my SIM Card to a new one. I later returned to the Apple store, but the phone still didn't work. The apple techs blamed the att network, and stated I needed to go home and wait for 24-48 hrs, and retry the att network again, and hopefully the phone will work. The next option they gave me was to pay $200.00 to get a replacement because my phone was out of warranty.
So I basically I have a phone which has never been dropped, not abused, no water damage or what so ever. Prior to my IOS 5 update, it worked perfectly without any problems. Now, that its not working as a result of either Apple's or Att's fault, no one seems to be helping or standing behing their product. Both parties are blaming each other for the problem. Can someone help??

I've seen a number of reports of this on here. In most cases where people took their phones in to the Apple store, they were given a replacement, even if the phone was out of warranty.

Z10: SD-card erased 12h after update (?)

Similar Messages

Maybe you are looking for