Z10 sending message in "band" over and over continuously although the message has been deleted from phone
I sent a document on my Z10 to someone. Since then the message continues to be transmitted on my WEBMAIL box although it has long been deleted from my Z10. If I remove the battery the problems becomes resolved. how can I fix this problem while continuing to use my phone.Much obliged Alec Pierre
jgapierre
if you don't have a backup then most likely those emails are gone for good.
just in case check the actual mailbox folders in finder.
go to the folder /users/username/library/mail. inside it there are folders for your email accounts. drill into the folder for the account in question to the folder Messages. there should be a bunch of .emlx files. they are the actual files for all the emails in that mailbox. how many are there? you can quicklook them and see what's inside. any old emails among them. if yes, post back and we can try to recover them.
if only emails for the last 24 hours are present then you are out of luck.
in the future I strongly recommend you start backing up.
Similar Messages
-
I've had my iPad (retina display) since last year. Over the last few weeks the App Store struggles to load on occasion and times out completely. When searches do rarely complete, the App Store closes down and returns my iPad to the home screen and, when I open the App Store again, it has just reset the store, forcing it to load all over again. I've tried closing all running background applications, with no difference being made. Any help would be greatly appreciated.
1. Double-click the Home button to reveal Task Bar
2. Hold the App Store app down for a second or two until you see the minus sign
3. Tap the minus sign to close app
4. Re-launch the app and test
Note: If necessary close all apps in the Task Bar -
I have a music album on my ipad that i cannot delege i have connected the ipad to my laptop where the album has been deleted from the music library but when i sync the ipad to the music i want the unwanted album still appears on the ipad any advice welcome thanks
Hi rosehooker,
Thanks for visiting Apple Support Communities.
Make sure you are following these steps to delete the music from both your iPad and computer:
On the iPad:
Before you delete, find out if you'll be able to download the song you deleted again (it depends on where you live). To delete a song:
Tap the Music app.
Tap the Songs category.
Swipe left to right over the song you want to delete.
Tap Delete.
On your computer:
Before you delete, find out if you'll be able to download the song you deleted again (it depends on where you live). To delete a song:
Launch iTunes.
From the Library pop-up menu, choose Music.
Click Songs in the navigation bar.
Click the song you want to delete.
Press the Delete key on your keyboard.
In iTunes 11, the album cover art will remain visible, but a cloud icon will appear on it to allow you to download the item again (in countries that support this).
Note: If you didn't purchase a song from the iTunes Store, you won't be able to download it again for free from iTunes in the Cloud. You might want to back it up somewhere on your computer.
You can find the steps above in this article:
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
Best,
Jeremy -
After restarting my computer firefox is deleted for Windows, when i try to open firefox a message pops up saying the program has been moved from its original location and is unable to run How do I get Firefox on my computer permanently?
I have tried everything I could to fix this, but some things require actually being on Firefox, and since I cannot get on, I cannot click on the tabs to do it. I have even totally uninstalled firefox, and that has not fixed this. I still get the same message that firefox is running and I need to close it or restart (which I have also tried dozens of times). I have removed things like Java, and that has not helped either. If I cannot even get on line in firefox, how can I fix this. I am not crazy about using internet explorer, but right now, it is my only option. I even tried to start in safe mode, and the same message box pops up!
-
"The destination has been deleted" & messages missing!
The server nohup.out is showing the stack trace below with the message, that "The destination has been deleted". However, the destination is still visible in the Weblogic console.
I could live with this message, if our application would still work properly. After 3 weeks of successful working, some (perhaps 5%) messages are missing and are not delivered to the topic subscribers. However, if this message is really correlated to our problem is not clear.
We use a Weblogic 9.2 cluster with 3 Nodes. A JMS distributed JMS topic is configured with a member on each node. The messages are persistent. As the application sends a message and stores data to a DB, we use JMS XA factories and XA jdbc drivers. Durable subscribers are connected to the topic members. There are no current and pending messages for the durable subscribers. However, the current messages count of the topic member are 17, 392, and 3636 respectively.
What to do? How to debug this problem?
Peter
<Mar 18, 2008 6:32:16 AM MET> <Warning> <JMS> <BEA-040498> <An error occurred while forwarding a message for distributed destination member datadispatcher-jms-module!HandlerTopic-2: weblogic.jms.common.JMSException: weblogic.messaging.kernel.IllegalStateException: The destination has been deleted
weblogic.jms.common.JMSException: weblogic.messaging.kernel.IllegalStateException: The destination has been deleted
at weblogic.jms.dispatcher.Request.handleThrowable(Request.java:63)
at weblogic.jms.dispatcher.Request.getResult(Request.java:51)
at weblogic.jms.backend.BEForwardingConsumer.processMessages(BEForwardingConsumer.java:475)
at weblogic.jms.backend.BEForwardingConsumer.pushMessages(BEForwardingConsumer.java:285)
at weblogic.messaging.util.DeliveryList.run(DeliveryList.java:256)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
weblogic.jms.common.JMSException: weblogic.messaging.kernel.IllegalStateException: The destination has been deleted
at weblogic.messaging.dispatcher.Request.getResult(Request.java:291)
at weblogic.jms.dispatcher.Request.getResult(Request.java:49)
at weblogic.jms.backend.BEForwardingConsumer.processMessages(BEForwardingConsumer.java:475)
at weblogic.jms.backend.BEForwardingConsumer.pushMessages(BEForwardingConsumer.java:285)
at weblogic.messaging.util.DeliveryList.run(DeliveryList.java:256)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
weblogic.jms.common.JMSException: weblogic.messaging.kernel.IllegalStateException: The destination has been deleted
at weblogic.jms.backend.BEDestinationImpl.tranForward(BEDestinationImpl.java:2189)
at weblogic.jms.backend.BEDestinationImpl.invoke(BEDestinationImpl.java:1503)
at weblogic.messaging.dispatcher.Request.wrappedFiniteStateMachine(Request.java:759)
at weblogic.messaging.dispatcher.DispatcherServerRef.invoke(DispatcherServerRef.java:276)
at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:141)
at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:36)
at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:112)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
weblogic.messaging.kernel.IllegalStateException: The destination has been deleted
at weblogic.messaging.kernel.internal.DestinationImpl.checkDeleted(DestinationImpl.java:217)
at weblogic.messaging.kernel.internal.DestinationImpl.checkDestinationState(DestinationImpl.java:394)
at weblogic.messaging.kernel.internal.QueueImpl.send(QueueImpl.java:304)
at weblogic.messaging.kernel.internal.TopicImpl.send(TopicImpl.java:155)
at weblogic.jms.backend.BEDestinationImpl.tranForward(BEDestinationImpl.java:2161)
at weblogic.jms.backend.BEDestinationImpl.invoke(BEDestinationImpl.java:1503)
at weblogic.messaging.dispatcher.Request.wrappedFiniteStateMachine(Request.java:759)
at weblogic.messaging.dispatcher.DispatcherServerRef.invoke(DispatcherServerRef.java:276)
at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:141)
at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:36)
at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:112)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
>
Edited by peter05 at 03/18/2008 9:13 AMPlease investigate these possibilities:
* Is it possible that the Destination you have looked up from JNDI is stale?
In other words, did you do the destination=context.lookup(distributedDestinationMember) only once in your application, but afterwards one or more of the servers has rebooted?
If so, you should re-create the initial context after the server has gone down, and refresh the destination with a new context.lookup
* Are you sure the durable subscription has been created before the first message has been sent?
Messages sent before the subscriber has been created will be missed by this dur sub.
=== a combination of both of these:
When a durable subscriber is created, WLS JMS looks to see if the subscription has CHANGED and should be replaced. Unfortunately if you are using a STALE destination from a previous boot, the destination will not match.
This may inadvertently replace an existing dur sub that has messages with a new one that has no messages.
Sal Gambino, BEA Messaging Team Lead -
Is there a way to retrieve a text message that has been deleted from my iphone?
Is there a way to retrieve a text message that has been deleted from my iphone? I did't delete the message but after i synced my phone the message was gone.
No, the app doesn't use Safari. The app is AutoDesk Inventor Publisher Viewer. I think there is a way that you can have a publish Inventor file, and if you create a correctly formatted hyperlink, you can click on it and it will immediately open the file in the viewer.
I know that if you offer the file as a standard download, iOS will ask whether you want to open it with Inventor Pub. Viewer or save it to another app that can accept files. I would prefer to skip the prompt, and just open the viewer.
I've heard mention that this can be done with this application, but I can't find reference material anywhere. -
My wife and I have an iphone each using one apple id. How do we stop phone contacts being deleted from one phone and then find it has been deleted from the other?
Also this works when one of us downloads an app it appears on the other iphoneYou need to use separate iCloud accounts. This will mean that you can both have your own separate contracts and calendars and put an end to them being deleted by each other.
Whether or not you have a separate iTunes account, is up to you. If you have a separate iTunes accounts you will not be able to access the music, books, apps that have been purchased by the other. This may be exactly what you want, but it also means that you both may end up purchasing the same item. -
My app account has been deleted from appstore,and i can't download purchased items on my new imac
my app account has been deleted from appstore,and i can't download purchased items on my new imac
what should i do?i purchased aperture 3 and final cut pro"my app account"
Click Account under Quick Links right side of the App Store window then sign in.
If you can login using your Apple ID, then your account is in good standing.
Otherwise try here > Apple ID: "This Apple ID has been disabled for security reasons" appears -
I changed my Apple ID and password and now it says the ID has been dissabled, please help
i need help with ipod touch 2g. i changed the apple id and password and now it says the id has been dissabled.
please help.Try resetting your passord. See:
Apple ID: "This Apple ID has been disabled for security reasons" alert appears
Next contact iTunes
Apple - Support - iTunes - Contact Us -
is there anyway i can retrieve recent text messages from the last 2 days and have them printed off after they have been deleted from my phone? this is seriously important i need this for an attourney!
click here:
Re: Can I request to get the content of old text messages -
I purchased the monthly download offer for Photoshop and Lightroom The first installment has been taken from my bank account, but no Lightroom has been downloaded. I managed to get a 'free 30 day trial' for the photoshop!. How do I contact Adobe about this. Any help
Thanks for replying.
To your question, yes I did follow the process listed in Install and Update apps. I have a Creative Cloud ID.
I had previously trialled the Lightroom and thought that this was preventing Lightroom from downloading, so I uninstalled it, then tried again to download it. I thought this was working, but at the end of the download, the message said that the trial had expired and I needed to buy.
I also cannot understand why the CC has downloaded as a free 30 day trial instead of the year I signed up for..Hoping you can help. Cheers -
Please help! (I'm actually doing this for a friend but still)
All you need to know:
- iPhone 4 16GB
- iOS 6.0.3 (I think, not the latest iOS but the one before that)
- Song which started to act strange: niggas in Paris
- All songs work fine on headphones (including above)
- The song has been on the iPhone for a couple of months and used to play without any trouble
- When you play it on the iPhone's speakers you either only hear the background music, no sound at all (for a few seconds) or a weird old FM-radio noise
- Plays fine on iTunes
All help is appreciated!
Thanks.I have this issue too. Same specs, newest OS. Happening on "O.N.E." by Yeasayer, but doesn't play the vocals through the speaker or headphone jack, unlike your issue. I just get all but the vocal track no matter what. Plays fine in iTunes. If you never get that distortion through the speaker any other time, maybe you can delete the song.
In my case, I can't delete the song through the phone since I use iTunes Match, but if you actually sync the songs/download them, that would be my first suggestion (swipe across, hit "delete."). Maybe that would work? Then resyncing or redownloading.
If not, maybe resetting or restoring may be the fix. -
Hello,
I am having problems with my Bookmark Bar.
I can add bookmarks to such then delete a bookmark and it disappears THEN it reappears once the program has been restarted or left for a while. I am using a MacBook Pro.
Thank you for your help in advance!Try:
*http://kb.mozillazine.org/Corrupt_localstore.rdf
If the menu bar is hidden then press the F10 key or hold down the Alt key to make the menu bar appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
*Open the Customize window via "View > Toolbars > Customize"
*If a missing item is in the toolbar palette then drag it back from the Customize window on the toolbar
*If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up
Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"
*http://kb.mozillazine.org/Toolbar_customization
*https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing -
Once a person has saved a fillable PDF onto their computer and entered information, closed the document, then reopens to add more information, they get an error message from Adobe Reader saying, "The document could not be saved. Cannot save to this filename. Please save the document with a different name or in a different folder." The machines in question use the Windows platform.
We have encountered the same problem at our company, and the following thread help us to resolve our problem:
Thanks to KevinCur.
Error while saving a .PDF File to a mapped drive
"It has to do with Protected Mode being turned on. I don't know if it was off by default & now it is on with the update but turning it off changes Adobe Reader's behavior back to what the users expect - a prompt warning you if you want to overwrite the existing file & then selecting Yes to overwrite.
To disable Protected Mode:
Start Adobe Reader
Edit - Preferences - Security (Enhanced)
Uncheck Enable Protected Mode at Startup
Close Preferences & Close Reader"
We unchecked the "Enable Protected Mode at startup" box --> Yes --> OK. Our users are happy now. ^_^ -
We have a Exchange 2003 SP2 Ent server. And we have blocked a specific domain by adding it on Global Settings - Message Delivery - Sender filtering
*@abc.com. It has been set for over a few years and until recently one of our user voice out that she can't receive a legitimate mail with
[email protected] Since there are lots of junk and malicious mail from abc.com, our manager is not willing to remove that domain from sender filtering. How can I exclude that specific address from sender filtering?
I've try on "Connection filtering -Configure an exception list to the block list service rule" to exclude that RECEIPIENT (To allow the user to receive every mail, buts seems only work for the mail blocked by "block list service" )
Is there any method to allow that user to receive the specific email address?
Thanks!HI,
It will not be possible as the filters are applied in the sequence below
Connection control filter (per SMTP virtual server)
Connection filtering
Recipient filtering
Sender filtering
Sender ID filtering
Intelligent message filtering
Refer to the below for more detailed explanation
http://www.msexchange.org/articles-tutorials/exchange-server-2003/security-message-hygiene/order-which-Exchange-2003-SP2-Connection-Filters-applied.html
Connection control filter (per SMTP virtual server)
Connection filtering
Recipient filtering
Sender filtering
Sender ID filtering
Intelligent message filtering
Connection control filter (per SMTP virtual server)
Connection filtering
Recipient filtering
Sender filtering
Sender ID filtering
Intelligent message filtering
Connection control filter (per SMTP virtual server)
Connection filtering
Recipient filtering
Sender filtering
Sender ID filtering
Intelligent message filtering
Blog: Http://theinfraguys.com
Follow me at Facebook http://www.facebook.com/theinfraguys
Please remember to click 'Mark as Answer' on the answer if it helps you in anyway
Maybe you are looking for
-
Report title on the PDF file generated by Braodcaster tool
Hello All - We are using "Broadcast by Email(Bursting)" feature to burst reports by Customer. Customer is the Characteristic value by which we are bursting. Also Email address is attribute of Customer so we are sending the reports to their email ad
-
I had an 8GB 1st gen iPod in it's original box in storage and just took it out to hook it up. Charged it overnight, plugged it into new Mac Book Pro and it was recognized as being an iPod in recovery but other identifying information was all indicat
-
Confining objects to a particular node in a distributed cluster
I have a partitioned cache for a cluster and there are n nodes(jvm instance) within that particular cluster. Both the data and backup data are randomly and evenly spread accross different nodes. Is there any way to put a constraint based on the cache
-
Problem in sending JMS message on remote OC4J
I have two OC4J standalone (10.1.3.0.0 build 041119.0001.2385) The containers work on Windows2000 in different machines connected by the LAN. The First container has deployed application from example http://www.oracle.com/technology/tech/java/oc4j/10
-
I have rights now 3 xserve with 1 xraid and 3 license of xsan. I want to be able to do load balancing and fault tolorence with the xserve. The problem I am having is that when I create a share point I have to point to a server and that's not good ide