Z10 upgrade issue

Evening All
I just got my Z10. I went to the software updates, and the first one downloaded and installed fine, all 148MB.
THe second upgrade it came up with to go to 10 OS version 10.0.10.90 downloaded fine, all 760MB of it. IT then installed, but only got to 97% and failed. I thought, OK, so tried to update again, and it downloaded the full file again, no problems, but again failed at the 97% mark.
Now the software update section says it has a update, but it it 0MB, and does not do anything. It wont let me cancel. I have tried powering down, and then restarting, it then says update failed, but nothing changes, I cant try agian or cancel the update.
Help. This is only my second blackberry, but I do like it, BBM is awesome :-)

Hey nsc79,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
I would suggest trying to perform the update through BlackBerry Link. Attach the BlackBerry Z10 to your computer and you'll see a red star appear at the bottom where it shows your BlackBerry Z10 is connected in BlackBerry Link. Click on that and choose install update.
This might take a few minutes longer but it will sure the update will go through.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Similar Messages

Upgrade issues OBIEE 10g to 11g along with OBIA upgrade

Hi,
I have to upgrade OBIEE 10.1.3.4.1 to OBIEE 11.1.1.5 along with OBIA 7.9.6.1 to 7.9.6.5(Informatica 8.6.1 to 9.0.1) at my client location and I have very little knowledge on it. and want to know/have help documents for upgrade.
And if anyone in the forums involved in upgrade please list the errors/issues occured during upgrade and after upgrade.
1. OBIEE 10g to 11g upgrade issues??
2. OBIA OBIA 7.9.6.1 to 7.9.6.5 upgrade issues along with 10g to 11g??
3. Informatica 8.6.1 to 9.0.1 upgrade issues??
4. DAC upgrade issues??
any response for my questions is appreciated.
Thanks
Jay.
Edited by: Jay on Apr 11, 2012 9:11 AM

HI Jay,
We cannot explained thread list here, If you get any errors plz post me,will try to help out.
This is oracle document link - This document has given step by step with screen shots upgration for 10g to 11g ,Please refer the below link.
http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi/bi11115/upgrade/upgrade_to_11g.htm
http://obieemanu.blogspot.in/2011/05/rpd-upgration-from-10g-to-11g.html
http://docs.oracle.com/cd/E21764_01/upgrade.1111/e10125/ua_command_line.htm#ASMAS149
Award points it is useful.
Thanks,
satya

Report generation toolkit upgrade issues

I have created multiple vi's in that utilize the previous report generation toolkits specifically using the Generate Report Get Data to Modify.vi and the Generate Report Set Modified Data.vi. Obviously the report reference has now changed in 8.6's version of the report generation toolkit and these vi's do not exist in the 8.6 library anymore. What vi's do I need to replace these functions with to make this code work. Can anyone tell me what the work around is to solving this problem. This is a picture of the code.
BJD1613
Lead Test Tools Development Engineer
Philips Respironics
Certified LV Architect / Instructor
Attachments:
code.JPG ‏92 KB

Hi BJD1613,
The Report Generation VIs on the LabVIEW Palettes mutate properly. However, you may run into upgrade issues if VIs distributed with LabVIEW, but not available in the Palettes are used in the code. Hence, I would caution against using them for the same reason.
In this case, the specific references do exist in the report generation classes; however, since they are private, they cannot be accessed by VIs outside the respective classes. A temporary workaround for now is mentioned in the following KB 4OOCSJ4M Getting References in Report Generation Toolkit 1.1.3 with LabVIEW 8.6.
This was reported to R&D (CAR# 123064) for further investigation

EHP Upgrade Issue - Java Stack

Hi,
Our Source System at NW 7.0 SP13 and we are upgrading the system to EHP1 SP03.
Upgrade failed at Downtime > DEPLOY_ONLINE_DEPL phase.
Error log:
Sep 9, 2009 10:11:51 PM [Error]:                       com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
Sep 9, 2009 10:11:51 PM [Error]:             com.sap.sdt.jspm.unattended.RequestController.addContextInfo(RequestController.java:178) [Thread[main,5,main]]: Deployment of queue sapjup-queue completed with error
JSPM version is 7.01.3.0.15. Current JSPM log directory is /usr/sap/XPD/JC00/j2ee/JSPM/log/log_2009_09_09_16_09_42.
Sep 9, 2009 10:11:51 PM [Error]: com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.createAndLogRapiException(SAPJupJSPMRapiAdapter.java:698) [Thread[main,5,main]]: The deployment of the queue failed.
Sep 9, 2009 10:11:51 PM [Error]: com.sap.sdt.sapjup.tools.sapjupjspm.deploy.SAPJupJSPMDeployer.deployList(SAPJupJSPMDeployer.java:68) [Thread[main,5,main]]: Could not execute deployment of stack file /usr/sap/trans/EPS/in/XPD.xml.
Sep 9, 2009 10:11:51 PM [Error]:      com.sap.sdt.j2ee.phases.PhaseTypeDeploymentManager.execute(PhaseTypeDeploymentManager.java:519) [Thread[main,5,main]]: Error while executing DeploymentManager phase with action deploySlot. Check the log files for the specified action.
Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase UPGRADE/DEPLOYMENT_BASED_UPGRADE/DEPLOY_ONLINE_DEPL has been completed.
Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2009/09/09 22:09:42.
Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2009/09/09 22:11:51.
Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:02:08.248.
Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]: Phase status is error.
I went through the following link , proceeded with option 2, But still getting same error.
Portal Upgrade Issue
Please advise the resolution for the issue I have.
Thanks in advance
Regards
Srinivas
Edited by: Srinivas Dasari on Sep 10, 2009 5:48 AM
Edited by: Srinivas Dasari on Sep 10, 2009 5:48 AM

Issue resolved

Upgrade issues list needed

Hi,
We're currently on 4.6b and going to upgrade to ECC6 with unicode I'm trying to compile a list point taken care converting to unicode from ABAP technical point of view. Does anyone have such a list?
Some points i shortlisted are :
1) Use GUI_UPLOAD and GUI_DOWNLOAD rather than WS_UPLOAD and WS_DOWNLOAD.
2) Structures or table headers that contain non-character data need to be identical when moving, comparing, selecting into, updating from, etc.
3) OPEN DATASET filename IN TEXT MODE FOR INPUT ENCODING DEFAULT.
I know there are others. Any help would be appreciated.
aRs

Check the below links
http://www.sapfans.com/forums/viewtopic.php?t=268386&highlight=upgrade+issues
http://www.sapfans.com/forums/viewtopic.php?t=263434&highlight=upgrade+issues
http://www.sapfans.com/forums/viewtopic.php?t=261051&highlight=upgrade+issues
http://www.sapfans.com/forums/viewtopic.php?t=253316&highlight=upgrade+issues

Errors in Forte 3.5 -Upgrade issue

hello ,
We are having a frequent disruption in the communication SO which has an
externalConnection Class. Did anything change in 3.5? We did not have
these errors in 3L!
After these erros, we have a mutex locking problem which leaves our
application hanging.
Any help will be greatly appreciated!
thanks
suma
Here is an Excerpt of the log file
Task 9: extConn4030a808.Write: 194 bytes written to 10
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Error #: [501, 152]
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Thu May 24 09:16:29
Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
(partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
[F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
"MerlinWindows_cl41", pid 23406 on node laxrc2 in environment laxrc2.
INFORMATION: Error parameters for Set:0 Msg:0:
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Thu May 24 09:16:29
Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
(partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
[F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
24-May-2001 09:16:47: VH.G.G..GUIT/GUI0/PLAXRC172.23.4.401/../..;PGYX;
Task 9: extConn4030a808.Write: 233 bytes written to 10
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Error #: [501, 152]
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Thu May 24 09:16:47
Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
(partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
[F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
"MerlinWindows_cl41", pid 23406 on node laxrc2 in environment laxrc2.
INFORMATION: Error parameters for Set:0 Msg:0:
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Thu May 24 09:16:47
regards,
Suma Venkatesh

-----Original Message-----
From: Venkatesh, Suma
Sent: Thursday, May 24, 2001 2:39 PM
To: '[email protected]'
Subject: Errors in Forte 3.5 -Upgrade issue
hello ,
We are having a frequent disruption in the communication SO which has an
externalConnection Class. Did anything change in 3.5? We did not have
these errors in 3L!
After these erros, we have a mutex locking problem which leaves our
application hanging.
Any help will be greatly appreciated!
thanks
suma
Here is an Excerpt of the log file
Task 9: extConn4030a808.Write: 194 bytes written to 10
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Error #: [501, 152]
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Thu May 24 09:16:29
Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
(partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
[F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
"MerlinWindows_cl41", pid 23406 on node laxrc2 in environment
laxrc2.
INFORMATION: Error parameters for Set:0 Msg:0:
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Thu May 24 09:16:29
Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
(partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
[F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
24-May-2001 09:16:47: VH.G.G..GUIT/GUI0/PLAXRC172.23.4.401/../..;PGYX;
Task 9: extConn4030a808.Write: 233 bytes written to 10
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Error #: [501, 152]
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Thu May 24 09:16:47
Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
(partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
[F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
"MerlinWindows_cl41", pid 23406 on node laxrc2 in environment
laxrc2.
INFORMATION: Error parameters for Set:0 Msg:0:
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Thu May 24 09:16:47
regards,
Suma Venkatesh

R12 upgrade issue:Not able to login using forms:Please help****urgent

We have recently upgraded our instance from 11.5.9 to 12.0.4 in Windows 2003 server.
We are unable to login to forms after upgrade, however we are able access self service responsibilities without any issues.
We are getting APP-FND-01496 when we access any forms responsibility. We have tried all possible metalink notes with no luck.
Any help to resolve this issue will be appreciated.

Duplicate thread ...
R12 upgrade issue:Not able to login to forms**please help
Re: R12 upgrade issue:Not able to login to forms**please help

ECC 6.0 EHP-4 upgrade Issue in phase MAIN SHDRUN/ALTNTAB FILL were negative

Hi Basis Expert,
while doing ECC 6.0 EHP-4 Upgrade in MAIN_SHDRUN/ALTNTAB_FILL phase we are getting the following issue please help us.
Checks after phase MAIN_SHDRUN/ALTNTAB_FILL were negative!
Last error code set: BATCH JOB RDDNT2MT FAILED: Error(s) found in the log(s), accumulated in "ALTNTFI.ELG".
We check the shadow instance is up and we can log in to the system. Check ST22 and SM21 notice no error.
Check the JOB RDDNT2MT (SM37) successfully running and all the job finish without any error.
Hope anybody can share a bit your experience on this issue. we try search the note and find the forum but no luck.
Thanks

Hi,
> 2EETG011 "No shadow system""(environment parameter)""auth_shadow_upgrade"
> 2EETG011 "No shadow system""DB-connect not against shadow tables !"
>
It looks from your log that shadow system is not able to connect to database. Please check your shadow system. Check below link as well:
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/ecc-6-upgrade-issue-in-phase-altntab_fill-1556272
Thanks
Sunny
Edited by: Sunny Pahuja on Oct 15, 2010 1:27 PM

Upgrade issues list

Hi All,
I was wondering if anyone had a list of Upgrade issues (most likely, from ticketting system) to the 5.0 system.
Thanks

Hi mark,
Can u please send me the upgrade issue list to this email address
[email protected]

IDSM-2 - upgrade issue - 5.x to 6.x

Hello All,
I have an issue upgrading the IDSM-2 module I'm playing with.
It is currently running version 5.0(2).
The thing is when I try to upgrade the image to the latest 6.x version using the .bin.gz file, I get the follwing error message :
The filename IPS-IDSM2-K9-sys-1.1-a-6.1-2-E3.bin.gz is not a valid upgrade file type.
Continue with upgrade? []:
There is no image file that is not .bin.gz on the download section of the website. Only recovery images have the .pkg extension.
Does anybody how to troubleshoot this simple(I guess) upgrade issue?
Regards,
Thibault.

You are trying to "upgrade" using a "System Image" (-sys-) file instead of an Upgrade file.
The upgrade file for the IDSM-2 is the standard upgrade file used across almost all IPS/IDS models:
IPS-K9-6.1-2-E3.pkg
It can be downloaded here:
http://www.cisco.com/cgi-bin/tablebuild.pl/ips6

Frustrating Phone Upgrade issue

We need help with phone upgrade issue we encounter when BestBuy associate process our upgrade. Associate is saying we are not eligible but we have not done any phone upgrade since Jan 2011. Our ATT mobile service was established with BB in 2009 and we only upgraded 2 phones in Jan 2011 thru BB. The only recent change in January 2013 was a change of responsibility between my spouse and me since my company has a better employer discount thru ATT. No change and per ATT, no contract and we should be able to upgrade in any retail store. But BB keeps telling us we have issue with ATT and can do our upgrade only with ATT Corporate Store. Our mobile account is a regular family plan account as originally established with BB and just like any BB customer, have employer's discount attached. I don't understand how BB system communicates with ATT system so it is hard for me to explain to ATT what "error message" BB associate is receiving. It has become so frustrating with BestBuy telling us to check with ATT and then for ATT to tell us that there is no issue at their end. We have been a loyal BB customer with all major appliances bought from them including protection plan. The least they can do is work with their ATT representative to figure out between themselves what the issue is. Here we are willing to give both companies our business with new phones and new contracts and no one can help us out.

LTGee -
I am very sorry to hear about this. I am going to send you a Private Message to collect some information from you to see if we can get to the bottom of this. To check your private messages, ensure you are logged into the forum and click on the envelope on the upper right hand side of the forum.
Thanks!
Jesus|Senior Social Media Specialist | Best Buy® Corporate
Private Message

BLACKBERRY Z10 CHARGING ISSUES AFTER UPGRADE TO 10.2.1.2102

HELLO ,
I recently upgraded my Z10 to OS 10.2.1.2102 and all was well until I noticed that my battery wasnt charging. The phone recognises the charger and shows the charging sign but doesnt charge. A random Battery app also confirmed that battery wasnt charging
I have tried everything I know.
Yesterday I downgraded to a lower OS and the phone charged with no issues but iI had to upgrade again because my backup was dont with 10.2.1.2102 and Link wouldn't allow me to restore to a lower OS version.
Please Help.
Battery on 15% now!
Thanks

There's something corrupt with the OS (appaprently just yours, not everyone's) so no worries about having to buy a new battery.
Plug your phone in to charge and leave it for an hour. After that time, check to see if it's recharging. If not, remove the battery while the phone is still plugged in to the charger then replace the battery a few seconds later and once again leave the phone for an hour. Sometimes when you load a new OS to your phone, it takes your phone a day or two to calibrate to the new settings. Your battery is fine but your phone won't show it as such for perhaps another day or two.
Cheers.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Blackberry 10 OS software upgrade issues

Please help!!!...hello everyone...I'm having issues with ma Z10...ever since I upgraded to the 10.2.1.2941 OS I've not been able to connect with my 3G network...anytime I try to connect to the 3G network all it says is *emergency calls only*....the issue started right after I upgraded my OS...please what do I do?
Solved!
Go to Solution.

Hello crownmx01
It is always recommended to troubleshoot software/hardware/network issues with reset BlackBerry phones first.
KB02141 Reset a BlackBerry smartphone
If the problem persist, then you need to make a call your mobile service provider to consult this network issue.
Good luck and let us know.
• Click Likes to appreciate those who helps you
• If your issue solved, mark the best post in your thread as Solution

Z10 Touchscreen Issues - Possible Solution?

A few months back my Z10 touchscreen became unresponsive. I could not find a solution, so I purchased a new Z10. Recenty I dropped the new Z10 in water...so, still in posession of the old unresponsive Z10, I decided to give it another try. I put my sim card in, and the new battery that came with the new phone. VOILA! Works like a charm. Try replacing your battery. i wish I had known this months ago, could have saved myself spending $200 on a new phone upgrade.

I'm happy for your positive outcome but I would argue that the battery was not the culprit. Sure, it appears that it was but exchanging batteries to correct a touchscreen issue is not something we would have suggested; I'm sure this is just coincidence.
Whatever the situation, you now have a Z10 in perfect working order. Thank you for sharing your experience with us.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Z10 Application Issues

Hi
I have just upgraded from a BB Curve 9230 (I think) to a BB Z10.
Also of the applications I had on my old Blackberry are not available on my new one, such as Barclays Mobile Banking and BT Wi-Fi.
Is this a common issue, and if so does anyone know how I can rectify this problem, as in my opinion when I get a NEW BLACKEBERRY i expect it to do atleast what my old one was capable of.
Many Thanks!
Matt

You might ask Barclays when then intend to release a BlackBerry10 OS application.
With over 100,000 apps in BlackBerryWorld the "app gap" is closing, but I understand your need.
Ask Barclays.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Z10 upgrade issue

Similar Messages

Maybe you are looking for