Z10 video Upload

Hi yal had my Z10 for about 3 months now And have to say nice piece kit works well feels good Not for the negative side Up until recently All my videos would seamlessly upload to YouTube /FaceBook with no problems but just recently (3wks) all I seem to get Is problems with uploading (Upload Fail) Now I've searched & searched for some kind of answer to this problem and Can I  get answer....NO!!
Bit of background on me and My Problem,I converted from Apple (3/3G/4/4S had apple from the beginning)  to the z10 because of its amazing camera and OS/Hub but I Now find myself seriously considering going back to apple as Videos are my business and if I can't upload to YouTube & FaceBook whilst out on location and yet I can with my partners Iphone then maybe I have no option but revert back to Iphone. Hopefully some one will have an answer for me as I love the Z10 but Im loosing Patience .
Cheers
Take Time to look around

Hello,
Based on what you have provided, it is very difficult to diagnose anything. For example, are you using WiFi or carrier data network to attempt this? Further, are you using an app or a web browser interface? And, is "Upload Fail" the exact and complete content of the error message presented? Since we cannot see you or your device, we depend 100% on what you tell us...and hence that needs to be complete so that we can properly understand...
Nevertheless, anytime random strange behavior or sluggishness shows up, the first thing to try is a proper reboot:
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. If this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Video uploading from DV camera no longer breaks into scenes

    When I first started using iMovie 4 my video uploaded as it was supposed to, breaking into distinct scenes on the clipboard. For about a year now iMove stopped uploading correctly and began uploading video only in large 9 minute blocks. This is obviously not very convenient when you want to quickly find a scene. I would like to understand why this might have happened and how I might restore the correct function.
    My preferences have "Automatically create new clip at scene break" checked. What could be wrong?
    Frustrated!
    Richard

    Have you actually checked the footage you are importing to see if there is data and time date stamped in the footage? This is to check to see if the date stamp is ok and a problem with iMovie or if there is no date stamp (or one long continuious one across all the footage) in which case iMovie is acting normal and you have an issue with your footage, video camera, etc.
    Patrick

  • Still can't get good, crisp, video upload and export

    I have read the HD express manual, read the articles by Ken Stone and my video uploads are still not that crisp. When I export the MOV to my desktop it looks perfect, every detail. My original video is crytsal clear, beautiful, but when I upload it to "My Space" it looks a bit fuzzy or flat. Now I know what you're going to say, "it's MY SPACE, but you know what, it's not. There are plenty of very clear and crisp videos from musicians and music videos on MY SPACE that are clear as day and crisp - so I don't agree it's MY SPACE. My Space allows for .MOV/Quicktime uploads - 100MB. I tried H.264, still looks flat and washed out. I tried Sorenson, still looks flat. What's confusing me is the frame rate and key frame rate I should set it at for a simple 320 x 240 upload and all the other detailed settings that are optional. What are my best option, step by step. I have exhuasted myself with this - up until 2 a.m. for 4 days. Please help. I have tried so many options. Thank you for your time. Sheila

    Sheila,
    What is the source of the original video (original capture from DV camera, Quicktime video, rip from DVD ...)? What settings are you using when you export to your Desktop as a MOV? When you say it's crystal clear, what are you watching it on? Is the MOV file what you are uploading to MySpace, or are you doing a different export for uploading; if so, what settings are you using for that export?
    What versions of FCE and QT do you have installed on your Mac? And what are the model & specs of your Mac?

  • How can i get a full url of video uploaded in asset library on sharepoint 2013

    Hi All,
    I have videos in SharePoint 2013 Asset Library, now i want display that videos in my SharePoint webpage as a webpart.
    Now, how can i get a full url of video uploaded in asset library?
    Thanks in Advance!

    The Asset library does a pretty good job of hiding the full URL. An "asset" item is actually a folder. The folder contains the video and support files like preview thumbnails.
    So, if you upload a video named butterfly.wmv to http://yourSite/sites/demo/Assets the path to the video would be http://yourSite/sites/demo/Assets/butterfly/butterfly.wmv. If the user changed the name while uploading the file to "Pretty bugs"
    the URL would then be http://yourSite/sites/demo/Assets/Pretty%20Bugs/butterfly.wmv.
    Probably the best way to explore these hidden folders and discover the "real" URL is to use SharePoint Designer 2013.
    Launch SharePoint Designer and open your site.
    In the Navigation area click "All Files". (If you don't see All Files then your administrators may have partially locked down SPD.)
    In the list of files and folders click the Assets library.
    Find and click your video (you will see the "Name" as entered in the file's properties, not the file name.)
    Find the video file, right-click it and click Properties.
    Copy the Location.
    If you just want to display the video in the page:
    Edit the page
    Click INSERT
    Click Web Part
    From the Media and Content category select Media Web Part and click Add.
    Edit the web part (click the web part's dropdown)
    From the MEDIA ribbon click Change Media
    Click From SharePoint and navigate to your assets library and pick a video
    Mike Smith TechTrainingNotes.blogspot.com
    Books:
    SharePoint 2007 2010 Customization for the Site Owner,
    SharePoint 2010 Security for the Site Owner

  • Need help with video uploading in flex 4

    hey guys... so i need to create a video uploading application... with video chunking...
    basically i need to break up the video file (may be 1Gig or more in size) in pieces and send it to the server using a method i call from my webservice...
    any ideas??
    i believe this process is called chunking... not sure how to do this...
    thank you very much in advance!!!

    dude. some time itunes just doesnt support drag and drop techniques . just try the simple copy and paste(ctrl(c+v)). if that file is gonna be played on the ipod u get a small tab box in the itunes that the file which u r copying is being processed .
    even if this technique doesnt work , then thats a faulty format . u can try another video converter . say videora or Aplus video converter . u will find them in www.download.com

  • Why isn't my iMovie video uploading to YouTube

    Why isn't my iMovie video uploading to YouTube?

    Hi, it could be the video incompatible issue. You can try to convert your iMovie video to YouTube supported foramt using a video conversion program and then upload the converted video to YouTube.

  • Videos uploaded on SharePoint do not play on MAC OS

    Hi,
    We are facing an issue wherein we notice that any video uploaded on SharePoint 2013, does not play on MAC OS. It continues to remain in the "Loading" state and does not start playback. Moreover an authentication window is prompted behind the safari
    browser window, entering credentials into which does not prove any helpful either.
    I've already gone through this blog and believe this is a standard issue.
    http://blogs.technet.com/b/sharepoint_me_in_the_right_direction/archive/2014/01/23/playing-windows-authenticated-sharepoint-2013-videos-from-mac-os-x-device-and-safari-browser-_2d00_-solution.aspx
    We already have  in place one of the solutions (e.g. blob cache), described in this post, but it has not helped to resolve this issue.
    Any suggestions would be highly helpful.
    Thanks -
    Girish

    Hi Girish,
    According to your description, my understanding is that the video cannot play on Mac OS which was uploaded to SharePoint.
    I recommend to use HTML5 code to embed the video in SharePoint and then it can play on Mac OS with Safari browser.
    Here is a similar thread for you to take a look:
    http://social.technet.microsoft.com/Forums/en-US/4803449a-19b2-4479-8745-d33e692202ae/video-in-web-part-wont-play-on-a-mac?forum=sharepointdevelopment
    More reference:
    http://blogs.office.com/2013/03/08/enhanced-video-experience-in-sharepoint-2013/
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • IPhone 5 video upload, YouTube and authentication fail

    This stopped working for me - when I switched to Google 2 step authentication,
    I cannot log in to my iPhone 5 video upload YouTube authentication. I try my google email, my YT userID, the password, and the generated application password from Google security settings.
    Nothing.
    I have been using the email upload.
    Anyone?

    Here is the answer:
    http://productforums.google.com/forum/#!topic/youtube/y9dmQdltjs8

  • Videos uploaded by users

    Hello,
    I'm trying to find a solution to my problem, any assistance would be greatly appreciated as I've exhausted all my limited knowledge and reading materials.
    I am looking for a way to allow users to submit video files, likely in excess of 200MB.  As far as I can tell from what I have read, PHP is limited to 2MB and if PHP isn't my web hosting service is so either way I'm in trouble.  I do not want the users to have access to the videos or even see that there are other videos in the upload folder; any program that I find that seems like it may allow for larger files is a file sharing program and outside the realm of what I am looking for.
    Is there programming that I could do which would link directly to my FTP site, but only in a one way capacity for the user?  I'm building the site in Dreamweaver, but could move this discussion to the Flash forum if that would be a more intelligent place to go.
    I have no problem purchasing books or other training materials if anyone knows of such materials that address this question.  Free information is always good too, but given the nature of this inquiry I imagine the solution, if it exists, is rather involved.  
    Again thank you for your time.

    The webassist software is only for complete uploads/downloads as far as I am aware, but you should check with them.
    There is a way to 'break-up' files into smaller pieces, but this would mean uploading 100 separate files, which is not really an option.
    Definitely check with your server provider, and if they are not willing to increase the upload default limit (don't forget there is a bandwidth issue here also), then check with other server providers as some do specialize in allowing large file sizes, especially for video uploads/downloads.
    As for file sharing providers then choose one that offers 'authorized users only', (sorry, no recommendations). An alternative would be to allow the uploads via your normal ftp log-in password  (you could use the webassist software for this), to a specific folder as this would be transparent to your user, but there are some serious security issues to overcome with this method.
    PZ

  • FCE video upload forum

    Hi
    Is there a FCE video upload discussion forum within the Apple website, where members can upload videos or post links to videos uploaded to youtube, myspace, etc? It would be nice to be able to view other peoples work done in FCE for inspiration or provide feedback if they want it or vice versa.
    Or is something like that (video upload discussion forum) part of this discussion forum?
    Thanks

    There is nothing like that provided by Apple. I asked nearly 4 years ago and there have been regular requests from other people.
    The most that happens is that occasionally people post links to their videos on Vimeo, YouTube etc.
    I agree that it would be nice to have a site dedicated to reasonably well edited videos from Final Cut and iMovie users as opposed to the likes of YouTube submissions which are probably 99% rubbish.

  • HT204264 Will my photos and videos upload to my iCloud if my device is locked?

    Will my photos and videos upload to my iCloud account if my device is locked? (Assuming I'm on wifi and my device is charging.)

    If you mean screen lock, yes.

  • Edit account settings for MobileMe and YouTube video upload

    I entered an older account to test a video upload from my new 3GS. Now I want to post videos to a different account, but I can't find the spot to change the settings for the account details. Anyone got any suggestions?

    I have the same problem, have you found the answer yet ?

  • Why i cant play videos uploaded through Facebook & Vimeo?

    I'm using Acer Aspire 4730Z, Windows 7 Ultimate 64-bit, Pentium(R) Dual-Core. I've got Firefox 6 installed on my laptops and i cant play all the videos uploaded through Facebook and Vimeo. But there's no problem loading Youtube videos. Please help!
    *pardon me, i'm not good in english. :)

    Have you tried on another computer? If it doesn't work there it is a site issue.

  • IPhone-App: video upload with imagePickerController - big problem

    I have a big problem in developing a video upload function in my iPhone-App.
    Here is, what I have done:
    First, I read the video data, the user selects, and store it in "MovieData" (it is NSData). I checked it and the NSData-object really has the value data of the video. Then there is a post function, which makes the upload (it worked before I included the video upload).
    Please look here:
    - (void)imagePickerController:(UIImagePickerController *)picker didFinishPickingMediaWithInfo:(NSDictionary *)info
    if(info!=nil)
    NSString *mediaType = [info objectForKey:UIImagePickerControllerMediaType];
    if ( [mediaType isEqualToString:@"public.movie"]){
    NSURL *videoURL = [info objectForKey:UIImagePickerControllerMediaURL];
    NSLog(@"found video");
    MovieData = [NSData dataWithContentsOfURL:videoURL];
    bMovieSet=true;
    [self hidePicker:picker];
    [self clearPhotoPickers];
    return;
    UIImage* resizedImage = [info valueForKey:UIImagePickerControllerOriginalImage];
    if(resizedImage!=nil)
    [self useImageAsPhoto:resizedImage];
    [self hidePicker:picker];
    [self clearPhotoPickers];
    Then later I read this object and want to store it into a Dictionary. Please look here:
    NSMutableDictionary* variables = [NSMutableDictionary dictionary];
    if(MovieData!=nil)
    [variables setObject:MovieData forKey:@"video"];
    But here the app always crashes! I've tryed a lot, but I didn't get it work.
    Please help me.
    Thank you!

    WD enclosures don't have a good rep with Macs anyway, great drives but terrible enclosures & chipsets.
    Open Activity Monitor, Show:>All Processes, sort on CPU%, see if anything using too much CPU% when this happens, click on Memory tab, do you have many Pageouts?
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.

  • Does anyone know of a video uploader template like youtube.

    Does anyone know of a video uploader template like youtube. My Muse site requires a page that visitors can upload their own videos. HELP!

    Thank you for your reply. I'm hosting videos on Vimeo. We want the uploads
    to go there. I just want an interface in our website the upload content to
    Vimeo. I saw WordPress templates but I have been told that PHP's won't work
    with Muse because they are not HTML 5's. I was hoping to use the API in
    Vimeo but still not sure how that works with our muse site or  Business
    Catalyst. Any ideas. By the way we have over 200gb storage on Vimeo for
    content.
    Happ New Year!

Maybe you are looking for